- 25 9月, 2013 10 次提交
-
-
由 Peter Zijlstra 提交于
Rewrite the preempt_count macros in order to extract the 3 basic preempt_count value modifiers: __preempt_count_add() __preempt_count_sub() and the new: __preempt_count_dec_and_test() And since we're at it anyway, replace the unconventional $op_preempt_count names with the more conventional preempt_count_$op. Since these basic operators are equivalent to the previous _notrace() variants, do away with the _notrace() versions. Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-ewbpdbupy9xpsjhg960zwbv8@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Peter Zijlstra 提交于
We need a few special preempt_count accessors: - task_preempt_count() for when we're interested in the preemption count of another (non-running) task. - init_task_preempt_count() for properly initializing the preemption count. - init_idle_preempt_count() a special case of the above for the idle threads. With these no generic code ever touches thread_info::preempt_count anymore and architectures could choose to remove it. Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-jf5swrio8l78j37d06fzmo4r@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Peter Zijlstra 提交于
In order to prepare to per-arch implementations of preempt_count move the required bits into an asm-generic header and use this for all archs. Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-h5j0c1r3e3fk015m30h8f1zx@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Peter Zijlstra 提交于
In order to combine the preemption and need_resched test we need to fold the need_resched information into the preempt_count value. Since the NEED_RESCHED flag is set across CPUs this needs to be an atomic operation, however we very much want to avoid making preempt_count atomic, therefore we keep the existing TIF_NEED_RESCHED infrastructure in place but at 3 sites test it and fold its value into preempt_count; namely: - resched_task() when setting TIF_NEED_RESCHED on the current task - scheduler_ipi() when resched_task() sets TIF_NEED_RESCHED on a remote task it follows it up with a reschedule IPI and we can modify the cpu local preempt_count from there. - cpu_idle_loop() for when resched_task() found tsk_is_polling(). We use an inverted bitmask to indicate need_resched so that a 0 means both need_resched and !atomic. Also remove the barrier() in preempt_enable() between preempt_enable_no_resched() and preempt_check_resched() to avoid having to reload the preemption value and allow the compiler to use the flags of the previuos decrement. I couldn't come up with any sane reason for this barrier() to be there as preempt_enable_no_resched() already has a barrier() before doing the decrement. Suggested-by: NIngo Molnar <mingo@kernel.org> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-7a7m5qqbn5pmwnd4wko9u6da@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Peter Zijlstra 提交于
Replace the single preempt_count() 'function' that's an lvalue with two proper functions: preempt_count() - returns the preempt_count value as rvalue preempt_count_set() - Allows setting the preempt-count value Also provide preempt_count_ptr() as a convenience wrapper to implement all modifying operations. Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-orxrbycjozopqfhb4dxdkdvb@git.kernel.org [ Fixed build failure. ] Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Peter Zijlstra 提交于
Mike reported that commit 7d1a9417 ("x86: Use generic idle loop") regressed several workloads and caused excessive reschedule interrupts. The patch in question failed to notice that the x86 code had an inverted sense of the polling state versus the new generic code (x86: default polling, generic: default !polling). Fix the two prominent x86 mwait based idle drivers and introduce a few new generic polling helpers (fixing the wrong smp_mb__after_clear_bit usage). Also switch the idle routines to using tif_need_resched() which is an immediate TIF_NEED_RESCHED test as opposed to need_resched which will end up being slightly different. Reported-by: NMike Galbraith <bitbucket@online.de> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Cc: lenb@kernel.org Cc: tglx@linutronix.de Link: http://lkml.kernel.org/n/tip-nc03imb0etuefmzybzj7sprf@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Peter Zijlstra 提交于
Preemption semantics are going to change which mandate a change. All DRM usage sites are already broken and will not be affected (much) by this change. DRM people are aware and will remove the last few stragglers. For now, leave an empty stub that generates a warning, once all users are gone we can remove this. Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Cc: airlied@linux.ie Cc: daniel.vetter@ffwll.ch Cc: paulmck@linux.vnet.ibm.com Link: http://lkml.kernel.org/n/tip-qfc1el2zvhxiyut4ai99ij4n@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Peter Zijlstra 提交于
We're going to deprecate and remove set_need_resched() for it will do the wrong thing. Make an exception for RCU and allow it to use resched_cpu() which will do the right thing. Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/n/tip-2eywnacjl1nllctl1nszqa5w@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Peter Zijlstra 提交于
Linus suggested using asm goto to get rid of the typical SETcc + TEST instruction pair -- which also clobbers an extra register -- for our typical modify_and_test() functions. Because asm goto doesn't allow output fields it has to include an unconditinal memory clobber when it changes a memory variable to force a reload. Luckily all atomic ops already imply a compiler barrier to go along with their memory barrier semantics. Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-0mtn9siwbeo1d33bap1422se@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Michael S. Tsirkin 提交于
We always know the rq used, let's just pass it around. This seems to cut the size of scheduler core down a tiny bit: Before: [linux]$ size kernel/sched/core.o.orig text data bss dec hex filename 62760 16130 3876 82766 1434e kernel/sched/core.o.orig After: [linux]$ size kernel/sched/core.o.patched text data bss dec hex filename 62566 16130 3876 82572 1428c kernel/sched/core.o.patched Probably speeds it up as well. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20130922142054.GA11499@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 20 9月, 2013 8 次提交
-
-
由 Jason Low 提交于
This patch builds on patch 2 and periodically decays that max value to do idle balancing per sched domain by approximately 1% per second. Also decay the rq's max_idle_balance_cost value. Signed-off-by: NJason Low <jason.low2@hp.com> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1379096813-3032-4-git-send-email-jason.low2@hp.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Jason Low 提交于
In this patch, we keep track of the max cost we spend doing idle load balancing for each sched domain. If the avg time the CPU remains idle is less then the time we have already spent on idle balancing + the max cost of idle balancing in the sched domain, then we don't continue to attempt the balance. We also keep a per rq variable, max_idle_balance_cost, which keeps track of the max time spent on newidle load balances throughout all its domains so that we can determine the avg_idle's max value. By using the max, we avoid overrunning the average. This further reduces the chance we attempt balancing when the CPU is not idle for longer than the cost to balance. Signed-off-by: NJason Low <jason.low2@hp.com> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1379096813-3032-3-git-send-email-jason.low2@hp.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Jason Low 提交于
When updating avg_idle, if the delta exceeds some max value, then avg_idle gets set to the max, regardless of what the previous avg was. This can cause avg_idle to often be overestimated. This patch modifies the way we update avg_idle by always updating it with the function call to update_avg() first. Then, if avg_idle exceeds the max, we set it to the max. Signed-off-by: NJason Low <jason.low2@hp.com> Reviewed-by: NRik van Riel <riel@redhat.com> Reviewed-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1379096813-3032-2-git-send-email-jason.low2@hp.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Vladimir Davydov 提交于
Currently new_dst_cpu is prevented from being reselected actually, not dst_cpu. This can result in attempting to pull tasks to this_cpu twice. Signed-off-by: NVladimir Davydov <vdavydov@parallels.com> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/281f59b6e596c718dd565ad267fc38f5b8e5c995.1379265590.git.vdavydov@parallels.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ingo Molnar 提交于
Merge in the latest fixes before applying a dependent patch. Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Vladimir Davydov 提交于
Patch a003a2 (sched: Consider runnable load average in move_tasks()) sets all top-level cfs_rqs' h_load to rq->avg.load_avg_contrib, which is always 0. This mistype leads to all tasks having weight 0 when load balancing in a cpu-cgroup enabled setup. There obviously should be sum of weights of all runnable tasks there instead. Fix it. Signed-off-by: NVladimir Davydov <vdavydov@parallels.com> Reviewed-by: NPaul Turner <pjt@google.com> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1379173186-11944-1-git-send-email-vdavydov@parallels.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Vladimir Davydov 提交于
In busiest->group_imb case we can come to fix_small_imbalance() with local->avg_load > busiest->avg_load. This can result in wrong imbalance fix-up, because there is the following check there where all the members are unsigned: if (busiest->avg_load - local->avg_load + scaled_busy_load_per_task >= (scaled_busy_load_per_task * imbn)) { env->imbalance = busiest->load_per_task; return; } As a result we can end up constantly bouncing tasks from one cpu to another if there are pinned tasks. Fix it by substituting the subtraction with an equivalent addition in the check. [ The bug can be caught by running 2*N cpuhogs pinned to two logical cpus belonging to different cores on an HT-enabled machine with N logical cpus: just look at se.nr_migrations growth. ] Signed-off-by: NVladimir Davydov <vdavydov@parallels.com> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/ef167822e5c5b2d96cf5b0e3e4f4bdff3f0414a2.1379252740.git.vdavydov@parallels.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Vladimir Davydov 提交于
In busiest->group_imb case we can come to calculate_imbalance() with local->avg_load >= busiest->avg_load >= sds->avg_load. This can result in imbalance overflow, because it is calculated as follows env->imbalance = min( max_pull * busiest->group_power, (sds->avg_load - local->avg_load) * local->group_power) / SCHED_POWER_SCALE; As a result we can end up constantly bouncing tasks from one cpu to another if there are pinned tasks. Fix this by skipping the assignment and assuming imbalance=0 in case local->avg_load > sds->avg_load. [ The bug can be caught by running 2*N cpuhogs pinned to two logical cpus belonging to different cores on an HT-enabled machine with N logical cpus: just look at se.nr_migrations growth. ] Signed-off-by: NVladimir Davydov <vdavydov@parallels.com> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/8f596cc6bc0e5e655119dc892c9bfcad26e971f4.1379252740.git.vdavydov@parallels.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 19 9月, 2013 2 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler fixes from Ingo Molnar: "Misc fixes" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix comment for sched_info_depart sched/Documentation: Update sched-design-CFS.txt documentation sched/debug: Take PID namespace into account sched/fair: Fix small race where child->se.parent,cfs_rq might point to invalid ones
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar: "Two small fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix UAPI export of PERF_EVENT_IOC_ID perf/x86/intel: Fix Silvermont offcore masks
-
- 18 9月, 2013 5 次提交
-
-
由 Vince Weaver 提交于
Without the following patch I have problems compiling code using the new PERF_EVENT_IOC_ID ioctl(). It looks like u64 was used instead of __u64 Signed-off-by: NVince Weaver <vincent.weaver@maine.edu> Acked-by: NPeter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1309171450380.11444@vincent-weaver-1.um.maine.eduSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM fixes from Gleb Natapov. * 'fixes' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: VMX: set "blocked by NMI" flag if EPT violation happens during IRET from NMI kvm: free resources after canceling async_pf KVM: nEPT: reset PDPTR register cache on nested vmentry emulation KVM: mmu: allow page tables to be in read-only slots KVM: x86 emulator: emulate RETF imm
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid由 Linus Torvalds 提交于
Pull HID updates from Jiri Kosina: "Fixes for CVE-2013-2897, CVE-2013-2895, CVE-2013-2897, CVE-2013-2894, CVE-2013-2893, CVE-2013-2891, CVE-2013-2890, CVE-2013-2889. All the bugs are triggerable only by specially crafted evil-on-purpose HW devices. Fixes by Kees Cook and Benjamin Tissoires" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: lenovo-tpkbd: fix leak if tpkbd_probe_tp fails HID: multitouch: validate indexes details HID: logitech-dj: validate output report details HID: validate feature and input report details HID: lenovo-tpkbd: validate output report details HID: LG: validate HID output report details HID: steelseries: validate output report details HID: sony: validate HID output report details HID: zeroplus: validate output report details HID: provide a helper for validating hid reports
-
由 Oleg Nesterov 提交于
Starting from v3.10 (probably commit f91e2590: "tty: Signal foreground group processes in hangup") disassociate_ctty() sends SIGCONT if tty && on_exit. This breaks LSB test-suite, in particular test8 in _exit.c and test40 in sigcon5.c. Put the "!on_exit" check back to restore the old behaviour. Review by Peter Hurley: "Yes, this regression was introduced by me in that commit. The effect of the regression is that ptys will receive a SIGCONT when, in similar circumstances, ttys would not. The fact that two test vectors accidentally tripped over this regression suggests that some other apps may as well. Thanks for catching this" Cc: stable@vger.kernel.org # v3.10+ Signed-off-by: NOleg Nesterov <oleg@redhat.com> Reported-by: NKarel Srot <ksrot@redhat.com> Reviewed-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Gleb Natapov 提交于
Set "blocked by NMI" flag if EPT violation happens during IRET from NMI otherwise NMI can be called recursively causing stack corruption. Signed-off-by: NGleb Natapov <gleb@redhat.com>
-
- 17 9月, 2013 14 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile由 Linus Torvalds 提交于
Pull more tile architecture updates from Chris Metcalf: "This second batch of changes is just cleanup of various kinds from doing some tidying work in the sources. Some dead code is removed, comment typos fixed, whitespace and style issues cleaned up, and some header updates from our internal "upstream" architecture team" * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: remove stray blank space tile: <arch/> header updates from upstream tile: improve gxio iorpc autogenerated code style tile: double default VMALLOC space tile: remove stale arch/tile/kernel/futex_64.S tile: remove HUGE_VMAP dead code tile: use pmd_pfn() instead of casting via pte_t tile: fix typos in comment in arch/tile/kernel/unaligned.c
-
由 Radim Krčmář 提交于
When we cancel 'async_pf_execute()', we should behave as if the work was never scheduled in 'kvm_setup_async_pf()'. Fixes a bug when we can't unload module because the vm wasn't destroyed. Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Gleb Natapov 提交于
After nested vmentry stale cache can be used to reload L2 PDPTR pointers which will cause L2 guest to fail. Fix it by invalidating cache on nested vmentry emulation. https://bugzilla.kernel.org/show_bug.cgi?id=60830Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Page tables in a read-only memory slot will currently cause a triple fault because the page walker uses gfn_to_hva and it fails on such a slot. OVMF uses such a page table; however, real hardware seems to be fine with that as long as the accessed/dirty bits are set. Save whether the slot is readonly, and later check it when updating the accessed and dirty bits. Reviewed-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Reviewed-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Bruce Rogers 提交于
Opcode CA This gets used by a DOS based NetWare guest. Signed-off-by: NBruce Rogers <brogers@suse.com> Reviewed-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer code update from Thomas Gleixner: - armada SoC clocksource overhaul with a trivial merge conflict - Minor improvements to various SoC clocksource drivers * 'timers/core' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: armada-370-xp: Add detailed clock requirements in devicetree binding clocksource: armada-370-xp: Get reference fixed-clock by name clocksource: armada-370-xp: Replace WARN_ON with BUG_ON clocksource: armada-370-xp: Fix device-tree binding clocksource: armada-370-xp: Introduce new compatibles clocksource: armada-370-xp: Use CLOCKSOURCE_OF_DECLARE clocksource: armada-370-xp: Simplify TIMER_CTRL register access clocksource: armada-370-xp: Use BIT() ARM: timer-sp: Set dynamic irq affinity ARM: nomadik: add dynamic irq flag to the timer clocksource: sh_cmt: 32-bit control register support clocksource: em_sti: Convert to devm_* managed helpers
-
由 Chris Metcalf 提交于
The compat sys_llseek() definition addition added a bogus space on an otherwise-blank line. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
The hardware architecture descriptor headers have been updated, in particular to reflect some larger MMIO fields on the mPIPE shims for controlling the network hardware, from the recent Gx72 release. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
Fix some whitespace style issues in some auto-generated files. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
With per-cpu data as well as loaded kernel modules coming from the vmalloc arena, we get close to the line all the time and occasionally need more than we had, so just double it up by default. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
Pull CIFS fixes from Steve French: "Two minor cifs fixes and a minor documentation cleanup for cifs.txt" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: cifs: update cifs.txt and remove some outdated infos cifs: Avoid calling unlock_page() twice in cifs_readpage() when using fscache cifs: Do not take a reference to the page in cifs_readpage_worker()
-
git://git.infradead.org/linux-ubi由 Linus Torvalds 提交于
Pull UBI fixes from Artem Bityutskiy: "Just a single fastmap fix plus a regression fix" * tag 'upstream-3.12-rc1' of git://git.infradead.org/linux-ubi: UBI: Fix invalidate_fastmap() UBI: Fix PEB leak in wear_leveling_worker()
-
git://git.infradead.org/linux-ubifs由 Linus Torvalds 提交于
Pull ubifs fix from Artem Bityutskiy: "Just one patch which fixes the power-cut recovery testing mode. I'll start using a single UBI/UBIFS tree instead of 2 trees from now on. So in the future you'll get 1 small pull request instead of 2 tiny ones" * tag 'upstream-3.12-rc1' of git://git.infradead.org/linux-ubifs: UBIFS: remove invalid warn msg with tst_recovery enabled
-
- 16 9月, 2013 1 次提交
-
-
由 Michael S. Tsirkin 提交于
sched_info_depart seems to be only called from sched_info_switch(), so only on involuntary task switch. Fix the comment to match. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Link: http://lkml.kernel.org/r/20130916083036.GA1113@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-