Using 'struct loaded_vmcs*' to track whether the CPU registers
contain host or guest state kills two birds with one stone.

  1. The (effective) boolean host_state.loaded is poorly named.
     It does not track whether or not host state is loaded into
     the CPU registers (which most readers would expect), but
     rather tracks if host state has been saved AND guest state
     is loaded.

  2. Using a loaded_vmcs pointer provides a more robust framework
     for the optimized guest/host state switching, especially when
     consideration per-VMCS enhancements.  To that end, WARN_ONCE
     if we try to switch to host state with a different VMCS than
     was last used to save host state.

Resolve an occurrence of the new WARN by setting loaded_vmcs after
the call to vmx_vcpu_put() in vmx_switch_vmcs().
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Use local variables in vmx_save_host_state() to temporarily track
the selector and base values for FS and GS, and reorganize the
code so that the 64-bit vs 32-bit portions are contained within
a single #ifdef.  This refactoring paves the way for future patches
to modify the updating of VMCS state with minimal changes to the
code, and (hopefully) simplifies resolving a likely conflict with
another in-flight patch[1] by being the whipping boy for future
patches.

[1] https://www.spinics.net/lists/kvm/msg171647.htmlSigned-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When checking emulated VMX instructions for faults, the #UD for "IF
(not in VMX operation)" should take precedence over the #GP for "ELSIF
CPL > 0."
Suggested-by: NEric Northup <digitaleric@google.com>
Signed-off-by: NJim Mattson <jmattson@google.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The fault that should be raised for a privilege level violation is #GP
rather than #UD.

Fixes: 727ba748 ("kvm: nVMX: Enforce cpl=0 for VMX instructions")
Signed-off-by: NJim Mattson <jmattson@google.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

We are currently cutting hva_to_pfn_fast short if we do not want an
immediate exit, which is represented by !async && !atomic.  However,
this is unnecessary, and __get_user_pages_fast is *much* faster
because the regular get_user_pages takes pmd_lock/pte_lock.
In fact, when many CPUs take a nested vmexit at the same time
the contention on those locks is visible, and this patch removes
about 25% (compared to 4.18) from vmexit.flat on a 16 vCPU
nested guest.
Suggested-by: NAndrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Register tlb_remote_flush callback for vmx when hyperv capability of
nested guest mapping flush is detected. The interface can help to
reduce overhead when flush ept table among vcpus for nested VM. The
tradition way is to send IPIs to all affected vcpus and executes
INVEPT on each vcpus. It will trigger several vmexits for IPI
and INVEPT emulation. Hyper-V provides such hypercall to do
flush for all vcpus and call the hypercall when all ept table
pointers of single VM are same.
Signed-off-by: NLan Tianyu <Tianyu.Lan@microsoft.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch is to provide a way for platforms to register hv tlb remote
flush callback and this helps to optimize operation of tlb flush
among vcpus for nested virtualization case.
Signed-off-by: NLan Tianyu <Tianyu.Lan@microsoft.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch is to add hyperv_nested_flush_guest_mapping support to trace
hvFlushGuestPhysicalAddressSpace hypercall.
Signed-off-by: NLan Tianyu <Tianyu.Lan@microsoft.com>
Acked-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Hyper-V supports a pv hypercall HvFlushGuestPhysicalAddressSpace to
flush nested VM address space mapping in l1 hypervisor and it's to
reduce overhead of flushing ept tlb among vcpus. This patch is to
implement it.
Signed-off-by: NLan Tianyu <Tianyu.Lan@microsoft.com>
Acked-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

On a VM with only 1 vCPU, the locking fast path will always be
successful. In this case, there is no need to use the the PV qspinlock
code which has higher overhead on the unlock side than the native
qspinlock code.
Signed-off-by: NWaiman Long <longman@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Merge check of "sp->role.cr4_pae != !!is_pae(vcpu))" and "vcpu->
arch.mmu.sync_page(vcpu, sp) == 0". kvm_mmu_prepare_zap_page()
is called under both these conditions.
Signed-off-by: NLan Tianyu <Tianyu.Lan@microsoft.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

It is a duplicate of X86_CR3_PCID_NOFLUSH. So just use that instead.
Signed-off-by: NJunaid Shahid <junaids@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Adds support for storing multiple previous CR3/root_hpa pairs maintained
as an LRU cache, so that the lockless CR3 switch path can be used when
switching back to any of them.
Signed-off-by: NJunaid Shahid <junaids@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This needs a minor bug fix. The updated patch is as follows.

Thanks,
Junaid

------------------------------------------------------------------------------

kvm_mmu_invlpg() and kvm_mmu_invpcid_gva() only need to flush the TLB
entries for the specific guest virtual address, instead of flushing all
TLB entries associated with the VM.
Signed-off-by: NJunaid Shahid <junaids@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When the guest indicates that the TLB doesn't need to be flushed in a
CR3 switch, we can also skip resyncing the shadow page tables since an
out-of-sync shadow page table is equivalent to an out-of-sync TLB.
Signed-off-by: NJunaid Shahid <junaids@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

kvm_mmu_free_roots() now takes a mask specifying which roots to free, so
that either one of the roots (active/previous) can be individually freed
when needed.
Signed-off-by: NJunaid Shahid <junaids@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This allows invlpg() to be called using either the active root_hpa
or the prev_root_hpa.
Signed-off-by: NJunaid Shahid <junaids@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When PCIDs are enabled, the MSb of the source operand for a MOV-to-CR3
instruction indicates that the TLB doesn't need to be flushed.

This change enables this optimization for MOV-to-CR3s in the guest
that have been intercepted by KVM for shadow paging and are handled
within the fast CR3 switch path.
Signed-off-by: NJunaid Shahid <junaids@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Implement support for INVPCID in shadow paging mode as well.
Signed-off-by: NJunaid Shahid <junaids@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When using shadow paging mode, propagate the guest's PCID value to
the shadow CR3 in the host instead of always using PCID 0.
Signed-off-by: NJunaid Shahid <junaids@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Remove the implicit flush from the set_cr3 handlers, so that the
callers are able to decide whether to flush the TLB or not.
Signed-off-by: NJunaid Shahid <junaids@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Use the fast CR3 switch mechanism to locklessly change the MMU root
page when switching between L1 and L2. The switch from L2 to L1 should
always go through the fast path, while the switch from L1 to L2 should
go through the fast path if L1's CR3/EPTP for L2 hasn't changed
since the last time.
Signed-off-by: NJunaid Shahid <junaids@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This adds support for re-initializing the MMU context in a different
mode while preserving the active root_hpa and the prev_root.
Signed-off-by: NJunaid Shahid <junaids@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This generalizes the lockless CR3 switch path to be able to work
across different MMU modes (e.g. nested vs non-nested) by checking
that the expected page role of the new root page matches the page role
of the previously stored root page in addition to checking that the new
CR3 matches the previous CR3. Furthermore, instead of loading the
hardware CR3 in fast_cr3_switch(), it is now done in vcpu_enter_guest(),
as by that time the MMU context would be up-to-date with the VCPU mode.
Signed-off-by: NJunaid Shahid <junaids@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The KVM_REQ_LOAD_CR3 request loads the hardware CR3 using the
current root_hpa.
Signed-off-by: NJunaid Shahid <junaids@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

These functions factor out the base role calculation from the
corresponding kvm_init_*_mmu() functions. The new functions return
what would be the role assigned to a root page in the current VCPU
state. This can be masked with mmu_base_role_mask to derive the base
role.
Signed-off-by: NJunaid Shahid <junaids@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When using shadow paging, a CR3 switch in the guest results in a VM Exit.
In the common case, that VM exit doesn't require much processing by KVM.
However, it does acquire the MMU lock, which can start showing signs of
contention under some workloads even on a 2 VCPU VM when the guest is
using KPTI. Therefore, we add a fast path that avoids acquiring the MMU
lock in the most common cases e.g. when switching back and forth between
the kernel and user mode CR3s used by KPTI with no guest page table
changes in between.

For now, this fast path is implemented only for 64-bit guests and hosts
to avoid the handling of PDPTEs, but it can be extended later to 32-bit
guests and/or hosts as well.
Signed-off-by: NJunaid Shahid <junaids@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

kvm_mmu_sync_roots() can locklessly check whether a sync is needed and just
bail out if it isn't.
Signed-off-by: NJunaid Shahid <junaids@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

sync_page() calls set_spte() from a loop across a page table. It would
work better if set_spte() left the TLB flushing to its callers, so that
sync_page() can aggregate into a single call.
Signed-off-by: NJunaid Shahid <junaids@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

It's never used.  Drop it.
Signed-off-by: NPeter Xu <peterx@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

No functionality change.
This is done as a preparation for VMCS shadowing virtualization.
Signed-off-by: NLiran Alon <liran.alon@oracle.com>
Signed-off-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

No functionality change.
Signed-off-by: NLiran Alon <liran.alon@oracle.com>
Signed-off-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Expose VMCS shadowing to L1 as a VMX capability of the virtual CPU,
whether or not VMCS shadowing is supported by the physical CPU.
(VMCS shadowing emulation)

Shadowed VMREADs and VMWRITEs from L2 are handled by L0, without a
VM-exit to L1.
Signed-off-by: NLiran Alon <liran.alon@oracle.com>
Signed-off-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: Do not forward VMREAD/VMWRITE VMExits to L1 if required so by vmcs12 vmread/vmwrite bitmaps

This is done as a preparation for VMCS shadowing emulation.
Signed-off-by: NLiran Alon <liran.alon@oracle.com>
Signed-off-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This is done as a preparation to VMCS shadowing emulation.
Signed-off-by: NLiran Alon <liran.alon@oracle.com>
Signed-off-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This includes setting up the shadow VMCS and the secondary execution
controls in lib/vmx.c.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The shadow vmcs12 cannot be flushed on KVM_GET_NESTED_STATE,
because at that point guest memory is assumed by userspace to
be immutable.  Capture the cache in vmx_get_nested_state, adding
another page at the end if there is an active shadow vmcs12.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This is done is done as a preparation to VMCS shadowing emulation.
Signed-off-by: NLiran Alon <liran.alon@oracle.com>
Signed-off-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Intel SDM considers these checks to be part of
"Checks on Guest Non-Register State".

Note that it is legal for vmcs->vmcs_link_pointer to be -1ull
when VMCS shadowing is enabled. In this case, any VMREAD/VMWRITE to
shadowed-field sets the ALU flags for VMfailInvalid (i.e. CF=1).
Signed-off-by: NLiran Alon <liran.alon@oracle.com>
Signed-off-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NLiran Alon <liran.alon@oracle.com>
Signed-off-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>