Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

GPU with low amount of ram can fails at pinning new framebuffer before
unpinning old one. On such failure, retry with unpinning old one before
pinning new one allowing to work around the issue. This is somewhat
ugly but only affect those old GPU we care about.
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Useless to count the register index in number of bytes we are writing.

Fixes a regression with hw i2c enabled.
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

With CONFIG_ACPI=n the following build warning is seen:

drivers/gpu/drm/radeon/cypress_dpm.c:302:31: warning: unused variable 'eg_pi' [-Wunused-variable]

Protect eg_pi with CONFIG_ACPI.

Based on patch from: Fabio Estevam <fabio.estevam@freescale.com>
but doesn't mix allocation and code.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

With CONFIG_ACPI=n the following build warning is seen:

drivers/gpu/drm/radeon/ni_dpm.c:3448:31: warning: unused variable 'eg_pi' [-Wunused-variable]

Move the definition of eg_pi inside the CONFIG_ACPI 'if' block.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We moved minor deallocation to drm_dev_free() in:
  commit 8f6599da
  Author: David Herrmann <dh.herrmann@gmail.com>
  Date:   Sun Oct 20 18:55:45 2013 +0200

      drm: delay minor destruction to drm_dev_free()

However, this causes a call to drm_unplug_minor(), which should just do
nothing as drm_dev_unregister() already called this.

But a separate patch caused kdev lifetime changes:
  commit 5bdebb18
  Author: Dave Airlie <airlied@redhat.com>
  Date:   Fri Oct 11 14:07:25 2013 +1000

      drm/sysfs: sort out minor and connector device object lifetimes.

Thus making our dev_is_registered() call useles (and even segfault if it
is NULL). Replace it with a simple !kdev test and we're fine.
Reported-by: NHuax Lu <huax.lu@intel.com>
Reported-by: NDaniel Vetter <daniel@ffwll.ch>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71208Tested-by: Nlu hua <huax.lu@intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDave Airlie <airlied@gmail.com>

Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next

- Page flipping fixes, with support for syncing them to vblank (finally...).
- Misc other general fixes

* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
  drm/nouveau: do not map evicted vram buffers in nouveau_bo_vma_add
  drm/nvc0-/gr: shift wrapping bug in nvc0_grctx_generate_r406800
  drm/nouveau/pwr: fix missing mutex unlock in a failure path
  drm/nv40/therm: fix slowing down fan when pstate undefined
  drm/nv11-: synchronise flips to vblank, unless async flip requested
  drm/nvc0-: remove nasty fifo swmthd hack for flip completion method
  drm/nv10-: we no longer need to create nvsw object on user channels
  drm/nouveau: always queue flips relative to kernel channel activity
  drm/nouveau: there is no need to reserve/fence the new fb when flipping
  drm/nouveau: when bailing out of a pushbuf ioctl, do not remove previous fence
  drm/nouveau: allow nouveau_fence_ref() to be a noop
  drm/nvc8/mc: msi rearm is via the nvc0 method

Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

We care about the upper 32 bits here so we have to use 1ULL instead of 1
to avoid a shift wrapping bug.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Not required anymore as flips are always done on the kernel's channel,
which means we can use a proper software object class instead.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Cc: stable@vger.kernel.org
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

One last patch I keep forgetting to include.  Fix for EDID quirk
handling.  Been on the list and reviewed for several months now,
I just keep forgetting about it.

* 'drm-next-3.13' of git://people.freedesktop.org/~agd5f/linux:
  drm/edid: compare actual vrefresh for all modes for quirks

Merge tag 'drm-intel-fixes-2013-11-12' of git://people.freedesktop.org/~danvet/drm-intel into drm-next

Just one patch to fix compile fail for CONFIG_ACPI=n. Figured I better
send this out quickly to minimize the broken build span. Otherwise no
bugfixes (besides some bdw stuff) anywhere in sight.

* tag 'drm-intel-fixes-2013-11-12' of git://people.freedesktop.org/~danvet/drm-intel:
  drm/i915/opregion: fix build error on CONFIG_ACPI=n

The page-prot bit fix.

* 'ttm-next-3.13' of git://people.freedesktop.org/~thomash/linux:
  drm/ttm: Fix vma page_prot bit manipulation

A resource eviction fix, and a fix for compilation / sparse problems
from the previous pull.

* 'vmwgfx-next-3.13' of git://people.freedesktop.org/~thomash/linux:
  drm/vmwgfx: Fix a couple of compile / sparse warnings and errors
  drm/vmwgfx: Resource evict fixes

Fix a long-standing TTM issue where we manipulated the vma page_prot
bits while mmap_sem was taken in read mode only. We now make a local
copy of the vma structure which we pass when we set the ptes.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>

Fixes
 *) an implicit function declaration on mips,
 *) a defined but not used label on !CONFIG_INTEL_IOMMU
 *) Hopefully a couple of sparse warnings where we implicitly typecast
    integer to __le32 and vice versa.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NBrian Paul <brianp@vmware.com>

Fix an error message that was incorrectly blaming device resource id
shortage.

Also make sure we correctly catch resource eviction errors, that
could otherwise lead to evictable resources temporarily not being on the
LRU list.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NJakob Bornecrantz <jakob@vmware.com>
Cc: stable@vger.kernel.org

The vrefresh field of the mode is 0 for most modes
fetched from the EDID (e.g., established timings).
When dealing with monitors that have a bogus preferred
mode, we may not always select the mode we want because
we compare the target refresh to the mode's vrefresh which
is 0 in a lot of cases.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

SDVO support for minnowboard

* 'gma500-next' of git://github.com/patjak/drm-gma500:
  drm/gma500/mrst: Add SDVO to output init
  drm/gma500/mrst: Don't blindly guess a mode for LVDS
  drm/gma500/mrst: Setup GMBUS for oaktrail/mrst
  drm/gma500/mrst: Replace WMs and chickenbits with values from EMGD
  drm/gma500/mrst: Add aux register writes to SDVO
  drm/gma500/mrst: Properly route oaktrail hdmi hooks
  drm/gma500/mrst: Add aux register writes when programming pipe
  drm/gma500/mrst: Add SDVO clock calculation
  drm/gma500: Add aux device support for gmbus
  drm/gma500: Add support for aux pci vdc device
  drm/gma500: Add chip specific sdvo masks
  drm/gma500: Add Minnowboard to the IS_MRST() macro

Turn clk_enable() and clk_disable() calls into clk_prepare_enable() and
clk_disable_unprepare() to get ready for the migration to the common
clock framework.

Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Merge tag 'bdw-stage1-2013-11-08-v2' of git://people.freedesktop.org/~danvet/drm-intel into drm-next

So here's the Broadwell pull request. From a kernel driver pov there's
two areas with big changes in Broadwell:
- Completely new enumerated interrupt bits. On the plus side it now looks
  fairly unform and sane.
- Completely new pagetable layout.

To ensure minimal impact on existing platforms we've refactored both the
irq and low-level gtt handling code a lot in anticipation of the bdw push.
So now bdw enabling in these areas just plugs in a bunch of vfuncs.

Otherwise it's all fairly harmless adjusting of switch cases and
if-ladders to shovel bdw into the right blocks. So minimized impact on
existing platforms. I've also merged the bdw-stage1 branch into our
-nightly integration branch for the past week to make sure we don't break
anything.

Note that there's still quite a flurry or patches floating around, but
I've figured I'll push this out. I plan to keep the bdw fixes separate
from my usual -fixes stream so that you can reject them easily in case it
still looks like too much churn. Also, bdw is for now hidden behind the
preliminary hw enabling module option. So there's no real pressure to get
follow-up patches all into 3.13.

* tag 'bdw-stage1-2013-11-08-v2' of git://people.freedesktop.org/~danvet/drm-intel: (75 commits)
  drm/i915: Mask the vblank interrupt on bdw by default
  drm/i915: Wire up cpu fifo underrun reporting support for bdw
  drm/i915: Optimize gen8_enable|disable_vblank functions
  drm/i915: Wire up pipe CRC support for bdw
  drm/i915: Wire up PCH interrupts for bdw
  drm/i915: Wire up port A aux channel
  drm/i915: Fix up the bdw pipe interrupt enable lists
  drm/i915: Optimize pipe irq handling on bdw
  drm/i915/bdw: Take render error interrupt out of the mask
  drm/i915/bdw: Add BDW PCH check first
  drm/i915: Use hsw_crt_get_config on BDW
  drm/i915/bdw: Change dp aux timeout to 600us on DDIA
  drm/i915/bdw: Enable trickle feed on Broadwell
  drm/i915/bdw: WaSingleSubspanDispatchOnAALinesAndPoints
  drm/i915/bdw: conservative SBE VUE cache mode
  drm/i915/bdw: Limit SDE poly depth FIFO to 2
  drm/i915/bdw: Sampler power bypass disable
  ddrm/i915/bdw: Disable centroid pixel perf optimization
  drm/i915/bdw: BWGTLB clock gate disable
  drm/i915/bdw: Implement edp PSR workarounds
  ...

A few more patches for 3.13.  The big one here is Hawaii support.
I wanted to get that out sooner, but was sick earlier this week.  That
said, it's mostly self contained, so it shouldn't impact other asics.
The rest are just bug fixes and a merge fix.

* 'drm-next-3.13' of git://people.freedesktop.org/~agd5f/linux: (23 commits)
  Revert "drm/radeon/audio: don't set speaker allocation on DCE4+"
  drm/radeon/audio: improve ACR calculation
  drm/radeon/audio: correct ACR table
  drm/radeon: fix mismerge of drm-next with 3.12
  drm/radeon: add pci ids for hawaii
  drm/radeon: fill in radeon_asic_init for hawaii
  drm/radeon: modesetting updates for hawaii
  drm/radeon: atombios.h updates for hawaii
  drm/radeon: update cik_get_csb_buffer for hawaii
  drm/radeon: add hawaii dpm support
  drm/radeon/cik: add hawaii UVD support
  drm/radeon: update firmware loading for hawaii
  drm/radeon: update rb setup for hawaii
  drm/radeon: add golden register settings for hawaii
  drm/radeon: update cik_tiling_mode_table_init() for hawaii
  drm/radeon: minor updates to cik.c for hawaii
  drm/radeon: update cik_gpu_init() for hawaii
  drm/radeon: add Hawaii chip family
  drm/radeon: fix-up some float to fixed conversion thinkos
  drm/radeon: use HDP_MEM_COHERENCY_FLUSH_CNTL for sdma as well
  ...

prime support, inactive rework, render nodes
* 'msm-next' of git://people.freedesktop.org/~robclark/linux:
  drm/msm/mdp4: page_flip cleanups/fixes
  drm/msm: EBUSY status handling in msm_gem_fault()
  drm/msm: rework inactive-work
  drm/msm: add plane support
  drm/msm: resync generated headers
  drm/msm: support render nodes
  drm/msm: prime support

This uses the proper div macro.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Fix CONFIG_ACPI=n build fail

  CC      drivers/gpu/drm/i915/intel_opregion.o
drivers/gpu/drm/i915/intel_opregion.c: In function ‘intel_opregion_setup’:
drivers/gpu/drm/i915/intel_opregion.c:879:2: error: ‘asle_work’ undeclared (first use in this function)
drivers/gpu/drm/i915/intel_opregion.c:879:2: note: each undeclared identifier is reported only once for each function it appears in
make[4]: *** [drivers/gpu/drm/i915/intel_opregion.o] Error 1

introduced in
commit 91a60f20
Author: Jani Nikula <jani.nikula@intel.com>
Date:   Thu Oct 31 18:55:48 2013 +0200

    drm/i915: move opregion asle request handling to a work queue
Reported-by: NJim Davis <jim.epost@gmail.com>
Reference: http://lkml.kernel.org/r/CA+r1ZhjcFpr5KKVX0pLCOP8cAyZoiYO=UyqYMJtNSV-Kt_p7xQ@mail.gmail.comSigned-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This reverts commit 555b1b65.

Let's try this again for 3.13.  It's required for proper
interaction with alsa.  Was disabled previously in 3.12
to be on the safe side since it caused problems on older
asics.

In order to have any realistic chance of calculating proper
ACR values, we need to be able to calculate both N and CTS,
not just CTS. We still aim for the ideal N as specified in
the HDMI spec though.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=69675Signed-off-by: NPierre Ossman <pierre@ossman.eu>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The values were taken from the HDMI spec, but they assumed
exact x/1.001 clocks. Since we round the clocks, we also need
to calculate different N and CTS values.

Note that the N for 25.2/1.001 MHz at 44.1 kHz audio is out of
spec. Hopefully this mode is rarely used and/or HDMI sinks
tolerate overly large values of N.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=69675Signed-off-by: NPierre Ossman <pierre@ossman.eu>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Audio is enabled by default now.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds the pci ids for hawaii.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fill in gpu details for hawaii.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>