1. 03 5月, 2009 2 次提交
  2. 14 4月, 2009 1 次提交
  3. 03 4月, 2009 10 次提交
    • D
      memcg: cleanup cache_charge · 83aae4c7
      Daisuke Nishimura 提交于
      Current mem_cgroup_cache_charge is a bit complicated especially
      in the case of shmem's swap-in.
      
      This patch cleans it up by using try_charge_swapin and commit_charge_swapin.
      Signed-off-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
      Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      83aae4c7
    • K
      cgroups: use css id in swap cgroup for saving memory v5 · a3b2d692
      KAMEZAWA Hiroyuki 提交于
      Try to use CSS ID for records in swap_cgroup.  By this, on 64bit machine,
      size of swap_cgroup goes down to 2 bytes from 8bytes.
      
      This means, when 2GB of swap is equipped, (assume the page size is 4096bytes)
      
      	From size of swap_cgroup = 2G/4k * 8 = 4Mbytes.
      	To   size of swap_cgroup = 2G/4k * 2 = 1Mbytes.
      
      Reduction is large.  Of course, there are trade-offs.  This CSS ID will
      add overhead to swap-in/swap-out/swap-free.
      
      But in general,
        - swap is a resource which the user tend to avoid use.
        - If swap is never used, swap_cgroup area is not used.
        - Reading traditional manuals, size of swap should be proportional to
          size of memory. Memory size of machine is increasing now.
      
      I think reducing size of swap_cgroup makes sense.
      
      Note:
        - ID->CSS lookup routine has no locks, it's under RCU-Read-Side.
        - memcg can be obsolete at rmdir() but not freed while refcnt from
          swap_cgroup is available.
      
      Changelog v4->v5:
       - reworked on to memcg-charge-swapcache-to-proper-memcg.patch
      Changlog ->v4:
       - fixed not configured case.
       - deleted unnecessary comments.
       - fixed NULL pointer bug.
       - fixed message in dmesg.
      
      [nishimura@mxp.nes.nec.co.jp: css_tryget can be called twice in !PageCgroupUsed case]
      Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: Li Zefan <lizf@cn.fujitsu.com>
      Cc: Balbir Singh <balbir@in.ibm.com>
      Cc: Paul Menage <menage@google.com>
      Cc: Hugh Dickins <hugh@veritas.com>
      Signed-off-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      a3b2d692
    • D
      memcg: charge swapcache to proper memcg · 3c776e64
      Daisuke Nishimura 提交于
      memcg_test.txt says at 4.1:
      
      	This swap-in is one of the most complicated work. In do_swap_page(),
      	following events occur when pte is unchanged.
      
      	(1) the page (SwapCache) is looked up.
      	(2) lock_page()
      	(3) try_charge_swapin()
      	(4) reuse_swap_page() (may call delete_swap_cache())
      	(5) commit_charge_swapin()
      	(6) swap_free().
      
      	Considering following situation for example.
      
      	(A) The page has not been charged before (2) and reuse_swap_page()
      	    doesn't call delete_from_swap_cache().
      	(B) The page has not been charged before (2) and reuse_swap_page()
      	    calls delete_from_swap_cache().
      	(C) The page has been charged before (2) and reuse_swap_page() doesn't
      	    call delete_from_swap_cache().
      	(D) The page has been charged before (2) and reuse_swap_page() calls
      	    delete_from_swap_cache().
      
      	    memory.usage/memsw.usage changes to this page/swp_entry will be
      	 Case          (A)      (B)       (C)     (D)
               Event
             Before (2)     0/ 1     0/ 1      1/ 1    1/ 1
                ===========================================
                (3)        +1/+1    +1/+1     +1/+1   +1/+1
                (4)          -       0/ 0       -     -1/ 0
                (5)         0/-1     0/ 0     -1/-1    0/ 0
                (6)          -       0/-1       -      0/-1
                ===========================================
             Result         1/ 1     1/ 1      1/ 1    1/ 1
      
             In any cases, charges to this page should be 1/ 1.
      
      In case of (D), mem_cgroup_try_get_from_swapcache() returns NULL
      (because lookup_swap_cgroup() returns NULL), so "+1/+1" at (3) means
      charges to the memcg("foo") to which the "current" belongs.
      OTOH, "-1/0" at (4) and "0/-1" at (6) means uncharges from the memcg("baa")
      to which the page has been charged.
      
      So, if the "foo" and "baa" is different(for example because of task move),
      this charge will be moved from "baa" to "foo".
      
      I think this is an unexpected behavior.
      
      This patch fixes this by modifying mem_cgroup_try_get_from_swapcache()
      to return the memcg to which the swapcache has been charged if PCG_USED bit
      is set.
      IIUC, checking PCG_USED bit of swapcache is safe under page lock.
      Signed-off-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
      Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: Li Zefan <lizf@cn.fujitsu.com>
      Cc: Hugh Dickins <hugh@veritas.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      3c776e64
    • K
      memcg: remove mem_cgroup_calc_mapped_ratio() · c137b5ec
      KOSAKI Motohiro 提交于
      Currently, mem_cgroup_calc_mapped_ratio() is unused at all.  it can be
      removed and KAMEZAWA-san suggested it.
      Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Acked-by: NBalbir Singh <balbir@linux.vnet.ibm.com>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      c137b5ec
    • B
      memcg: show memcg information during OOM · e222432b
      Balbir Singh 提交于
      Add RSS and swap to OOM output from memcg
      
      Display memcg values like failcnt, usage and limit when an OOM occurs due
      to memcg.
      
      Thanks to Johannes Weiner, Li Zefan, David Rientjes, Kamezawa Hiroyuki,
      Daisuke Nishimura and KOSAKI Motohiro for review.
      
      Sample output
      -------------
      
      Task in /a/x killed as a result of limit of /a
      memory: usage 1048576kB, limit 1048576kB, failcnt 4183
      memory+swap: usage 1400964akB, limit 9007199254740991kB, failcnt 0
      
      [akpm@linux-foundation.org: compilation fix]
      [akpm@linux-foundation.org: fix kerneldoc and whitespace]
      [akpm@linux-foundation.org: add printk facility level]
      Signed-off-by: NBalbir Singh <balbir@linux.vnet.ibm.com>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
      Cc: Li Zefan <lizf@cn.fujitsu.com>
      Cc: Paul Menage <menage@google.com>
      Cc: David Rientjes <rientjes@google.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e222432b
    • K
      memcg: fix OOM killer under memcg · 0b7f569e
      KAMEZAWA Hiroyuki 提交于
      This patch tries to fix OOM Killer problems caused by hierarchy.
      Now, memcg itself has OOM KILL function (in oom_kill.c) and tries to
      kill a task in memcg.
      
      But, when hierarchy is used, it's broken and correct task cannot
      be killed. For example, in following cgroup
      
      	/groupA/	hierarchy=1, limit=1G,
      		01	nolimit
      		02	nolimit
      All tasks' memory usage under /groupA, /groupA/01, groupA/02 is limited to
      groupA's 1Gbytes but OOM Killer just kills tasks in groupA.
      
      This patch provides makes the bad process be selected from all tasks
      under hierarchy. BTW, currently, oom_jiffies is updated against groupA
      in above case. oom_jiffies of tree should be updated.
      
      To see how oom_jiffies is used, please check mem_cgroup_oom_called()
      callers.
      
      [akpm@linux-foundation.org: build fix]
      [akpm@linux-foundation.org: const fix]
      Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: Paul Menage <menage@google.com>
      Cc: Li Zefan <lizf@cn.fujitsu.com>
      Cc: Balbir Singh <balbir@in.ibm.com>
      Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
      Cc: David Rientjes <rientjes@google.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      0b7f569e
    • K
      memcg: fix shrinking memory to return -EBUSY by fixing retry algorithm · 81d39c20
      KAMEZAWA Hiroyuki 提交于
      As pointed out, shrinking memcg's limit should return -EBUSY after
      reasonable retries.  This patch tries to fix the current behavior of
      shrink_usage.
      
      Before looking into "shrink should return -EBUSY" problem, we should fix
      hierarchical reclaim code.  It compares current usage and current limit,
      but it only makes sense when the kernel reclaims memory because hit
      limits.  This is also a problem.
      
      What this patch does are.
      
        1. add new argument "shrink" to hierarchical reclaim. If "shrink==true",
           hierarchical reclaim returns immediately and the caller checks the kernel
           should shrink more or not.
           (At shrinking memory, usage is always smaller than limit. So check for
            usage < limit is useless.)
      
        2. For adjusting to above change, 2 changes in "shrink"'s retry path.
           2-a. retry_count depends on # of children because the kernel visits
      	  the children under hierarchy one by one.
           2-b. rather than checking return value of hierarchical_reclaim's progress,
      	  compares usage-before-shrink and usage-after-shrink.
      	  If usage-before-shrink <= usage-after-shrink, retry_count is
      	  decremented.
      Reported-by: NLi Zefan <lizf@cn.fujitsu.com>
      Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: Paul Menage <menage@google.com>
      Cc: Balbir Singh <balbir@in.ibm.com>
      Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
      Cc: David Rientjes <rientjes@google.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      81d39c20
    • K
      memcg: hierarchical stat · 14067bb3
      KAMEZAWA Hiroyuki 提交于
      Clean up memory.stat file routine and show "total" hierarchical stat.
      
      This patch does
        - renamed get_all_zonestat to be get_local_zonestat.
        - remove old mem_cgroup_stat_desc, which is only for per-cpu stat.
        - add mcs_stat to cover both of per-cpu/per-lru stat.
        - add "total" stat of hierarchy (*)
        - add a callback system to scan all memcg under a root.
      == "total" is added.
      [kamezawa@localhost ~]$ cat /opt/cgroup/xxx/memory.stat
      cache 0
      rss 0
      pgpgin 0
      pgpgout 0
      inactive_anon 0
      active_anon 0
      inactive_file 0
      active_file 0
      unevictable 0
      hierarchical_memory_limit 50331648
      hierarchical_memsw_limit 9223372036854775807
      total_cache 65536
      total_rss 192512
      total_pgpgin 218
      total_pgpgout 155
      total_inactive_anon 0
      total_active_anon 135168
      total_inactive_file 61440
      total_active_file 4096
      total_unevictable 0
      ==
      (*) maybe the user can do calc hierarchical stat by his own program
         in userland but if it can be written in clean way, it's worth to be
         shown, I think.
      Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: Paul Menage <menage@google.com>
      Cc: Li Zefan <lizf@cn.fujitsu.com>
      Cc: Balbir Singh <balbir@in.ibm.com>
      Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
      Cc: David Rientjes <rientjes@google.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      14067bb3
    • K
      memcg: use CSS ID · 04046e1a
      KAMEZAWA Hiroyuki 提交于
      Assigning CSS ID for each memcg and use css_get_next() for scanning hierarchy.
      
      	Assume folloing tree.
      
      	group_A (ID=3)
      		/01 (ID=4)
      		   /0A (ID=7)
      		/02 (ID=10)
      	group_B (ID=5)
      	and task in group_A/01/0A hits limit at group_A.
      
      	reclaim will be done in following order (round-robin).
      	group_A(3) -> group_A/01 (4) -> group_A/01/0A (7) -> group_A/02(10)
      	-> group_A -> .....
      
      	Round robin by ID. The last visited cgroup is recorded and restart
      	from it when it start reclaim again.
      	(More smart algorithm can be implemented..)
      
      	No cgroup_mutex or hierarchy_mutex is required.
      Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: Paul Menage <menage@google.com>
      Cc: Li Zefan <lizf@cn.fujitsu.com>
      Cc: Balbir Singh <balbir@in.ibm.com>
      Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
      Cc: David Rientjes <rientjes@google.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      04046e1a
    • K
      cgroup: fix frequent -EBUSY at rmdir · ec64f515
      KAMEZAWA Hiroyuki 提交于
      In following situation, with memory subsystem,
      
      	/groupA use_hierarchy==1
      		/01 some tasks
      		/02 some tasks
      		/03 some tasks
      		/04 empty
      
      When tasks under 01/02/03 hit limit on /groupA, hierarchical reclaim
      is triggered and the kernel walks tree under groupA. In this case,
      rmdir /groupA/04 fails with -EBUSY frequently because of temporal
      refcnt from the kernel.
      
      In general. cgroup can be rmdir'd if there are no children groups and
      no tasks. Frequent fails of rmdir() is not useful to users.
      (And the reason for -EBUSY is unknown to users.....in most cases)
      
      This patch tries to modify above behavior, by
      	- retries if css_refcnt is got by someone.
      	- add "return value" to pre_destroy() and allows subsystem to
      	  say "we're really busy!"
      Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: Paul Menage <menage@google.com>
      Cc: Li Zefan <lizf@cn.fujitsu.com>
      Cc: Balbir Singh <balbir@in.ibm.com>
      Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      ec64f515
  4. 30 1月, 2009 2 次提交
  5. 16 1月, 2009 6 次提交
    • L
      memcg: fix a race when setting memory.swappiness · 068b38c1
      Li Zefan 提交于
      (suppose: memcg->use_hierarchy == 0 and memcg->swappiness == 60)
      
      echo 10 > /memcg/0/swappiness   |
        mem_cgroup_swappiness_write() |
          ...                         | echo 1 > /memcg/0/use_hierarchy
                                      | mkdir /mnt/0/1
                                      |   sub_memcg->swappiness = 60;
          memcg->swappiness = 10;     |
      
      In the above scenario, we end up having 2 different swappiness
      values in a single hierarchy.
      
      We should hold cgroup_lock() when cheking cgrp->children list.
      Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
      Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: Balbir Singh <balbir@in.ibm.com>
      Cc: Paul Menage <menage@google.com>
      Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      068b38c1
    • L
      memcg: fix section mismatch · 0eb253e2
      Li Zefan 提交于
      At system boot when creating the top cgroup, mem_cgroup_create() calls
      enable_swap_cgroup() which is marked as __init, so mark
      mem_cgroup_create() as __ref to avoid false section mismatch warning.
      Reported-by: NRakib Mullick <rakib.mullick@gmail.com>
      Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
      Acked-by; KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      0eb253e2
    • D
      memcg: make oom less frequently · 4d1c6273
      Daisuke Nishimura 提交于
      In previous implementation, mem_cgroup_try_charge checked the return
      value of mem_cgroup_try_to_free_pages, and just retried if some pages
      had been reclaimed.
      But now, try_charge(and mem_cgroup_hierarchical_reclaim called from it)
      only checks whether the usage is less than the limit.
      
      This patch tries to change the behavior as before to cause oom less
      frequently.
      Signed-off-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
      Acked-by: NBalbir Singh <balbir@linux.vnet.ibm.com>
      Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: Pavel Emelyanov <xemul@openvz.org>
      Cc: Li Zefan <lizf@cn.fujitsu.com>
      Cc: Paul Menage <menage@google.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      4d1c6273
    • D
      memcg: fix hierarchical reclaim · c268e994
      Daisuke Nishimura 提交于
      If root_mem has no children, last_scaned_child is set to root_mem itself.
      But after some children added to root_mem, mem_cgroup_get_next_node can
      mem_cgroup_put the root_mem although root_mem has not been mem_cgroup_get.
      
      This patch fixes this behavior by:
      
      - Set last_scanned_child to NULL if root_mem has no children or DFS
        search has returned to root_mem itself(root_mem is not a "child" of
        root_mem).  Make mem_cgroup_get_first_node return root_mem in this case.
         There are no mem_cgroup_get/put for root_mem.
      
      - Rename mem_cgroup_get_next_node to __mem_cgroup_get_next_node, and
        mem_cgroup_get_first_node to mem_cgroup_get_next_node.  Make
        mem_cgroup_hierarchical_reclaim call only new mem_cgroup_get_next_node.
      Signed-off-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
      Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: Pavel Emelyanov <xemul@openvz.org>
      Cc: Li Zefan <lizf@cn.fujitsu.com>
      Cc: Paul Menage <menage@google.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      c268e994
    • D
      memcg: fix error path of mem_cgroup_move_parent · 40d58138
      Daisuke Nishimura 提交于
      There is a bug in error path of mem_cgroup_move_parent.
      
      Extra refcnt got from try_charge should be dropped, and usages incremented
      by try_charge should be decremented in both error paths:
      
          A: failure at get_page_unless_zero
          B: failure at isolate_lru_page
      
      This bug makes this parent directory unremovable.
      
      In case of A, rmdir doesn't return, because res.usage doesn't go down to 0
      at mem_cgroup_force_empty even after all the pc in lru are removed.
      
      In case of B, rmdir fails and returns -EBUSY, because it has extra ref
      counts even after res.usage goes down to 0.
      Signed-off-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
      Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Acked-by: NBalbir Singh <balbir@linux.vnet.ibm.com>
      Cc: Pavel Emelyanov <xemul@openvz.org>
      Cc: Li Zefan <lizf@cn.fujitsu.com>
      Cc: Paul Menage <menage@google.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      40d58138
    • D
      memcg: fix mem_cgroup_get_reclaim_stat_from_page · bd112db8
      Daisuke Nishimura 提交于
      In case of swapin, a new page is added to lru before it is charged,
      so page->pc->mem_cgroup points to NULL or last mem_cgroup the page
      was charged before.
      
      In the latter case, if the mem_cgroup has already freed by rmdir,
      the area pointed to by page->pc->mem_cgroup may have invalid data.
      
      Actually, I saw general protection fault.
      
          general protection fault: 0000 [#1] SMP
          last sysfs file: /sys/devices/system/cpu/cpu15/cache/index1/shared_cpu_map
          CPU 4
          Modules linked in: ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp ipv6 autofs4 hidp rfcomm l2cap bluetooth sunrpc dm_mirror dm_region_hash dm_log dm_multipath dm_mod rfkill input_polldev sbs sbshc battery ac lp sg ide_cd_mod cdrom button serio_raw acpi_memhotplug parport_pc e1000 rtc_cmos parport rtc_core rtc_lib i2c_i801 i2c_core shpchp pcspkr ata_piix libata megaraid_mbox megaraid_mm sd_mod scsi_mod ext3 jbd ehci_hcd ohci_hcd uhci_hcd [last unloaded: microcode]
          Pid: 26038, comm: page01 Tainted: G        W  2.6.28-rc9-mm1-mmotm-2008-12-22-16-14-f2ab3dea #1
          RIP: 0010:[<ffffffff8028e710>]  [<ffffffff8028e710>] update_page_reclaim_stat+0x2f/0x42
          RSP: 0000:ffff8801ee457da8  EFLAGS: 00010002
          RAX: 32353438312021c8 RBX: 0000000000000000 RCX: 32353438312021c8
          RDX: 0000000000000000 RSI: ffff8800cb0b1000 RDI: ffff8801164d1d28
          RBP: ffff880110002cb8 R08: ffff88010f2eae23 R09: 0000000000000001
          R10: ffff8800bc514b00 R11: ffff880110002c00 R12: 0000000000000000
          R13: ffff88000f484100 R14: 0000000000000003 R15: 00000000001200d2
          FS:  00007f8a261726f0(0000) GS:ffff88010f2eaa80(0000) knlGS:0000000000000000
          CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
          CR2: 00007f8a25d22000 CR3: 00000001ef18c000 CR4: 00000000000006e0
          DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
          DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
          Process page01 (pid: 26038, threadinfo ffff8801ee456000, task ffff8800b585b960)
          Stack:
           ffffe200071ee568 ffff880110001f00 0000000000000000 ffffffff8028ea17
           ffff88000f484100 0000000000000000 0000000000000020 00007f8a25d22000
           ffff8800bc514b00 ffffffff8028ec34 0000000000000000 0000000000016fd8
          Call Trace:
           [<ffffffff8028ea17>] ? ____pagevec_lru_add+0xc1/0x13c
           [<ffffffff8028ec34>] ? drain_cpu_pagevecs+0x36/0x89
           [<ffffffff802a4f8c>] ? swapin_readahead+0x78/0x98
           [<ffffffff8029a37a>] ? handle_mm_fault+0x3d9/0x741
           [<ffffffff804da654>] ? do_page_fault+0x3ce/0x78c
           [<ffffffff804d7a42>] ? trace_hardirqs_off_thunk+0x3a/0x3c
           [<ffffffff804d860f>] ? page_fault+0x1f/0x30
          Code: cc 55 48 8d af b8 0d 00 00 48 89 f7 53 89 d3 e8 39 85 02 00 48 63 d3 48 ff 44 d5 10 45 85 e4 74 05 48 ff 44 d5 00 48 85 c0 74 0e <48> ff 44 d0 10 45 85 e4 74 04 48 ff 04 d0 5b 5d 41 5c c3 41 54
          RIP  [<ffffffff8028e710>] update_page_reclaim_stat+0x2f/0x42
           RSP <ffff8801ee457da8>
      Signed-off-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
      Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
      Cc: Pavel Emelyanov <xemul@openvz.org>
      Cc: Li Zefan <lizf@cn.fujitsu.com>
      Cc: Paul Menage <menage@google.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      bd112db8
  6. 09 1月, 2009 19 次提交