- 11 4月, 2008 23 次提交
-
-
由 Dan Williams 提交于
If a failure is detected after a parity check operation has been initiated, but before it completes handle_parity_checks5 will never quiesce operations on the stripe. Explicitly handle this case by "canceling" the parity check, i.e. clear the STRIPE_OP_CHECK flags and queue the stripe on the handle list again to refresh any non-uptodate blocks. Kernel versions >= 2.6.23 are susceptible. Cc: <stable@kernel.org> Cc: NeilBrown <neilb@suse.de> Signed-off-by: NDan Williams <dan.j.williams@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Pagano 提交于
This patch adds the missing include directive <linux/scatterlist.h> to the cciss.c source file. This was discovered by our release team when building the kernel for the Alpha architecture. Errors were found as references to functions 'sg_init_table' and 'sg_page' do not exist without the include for Alpha. Signed-off-by: NMike Pagano <mpagano@gentoo.org> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: <mike.miller@hp.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kay Sievers 提交于
Since 43cc71ee, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable RTC platform drivers, to re-enable module auto loading. [dbrownell@users.sourceforge.net: more drivers, minor fix] Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Cc: Greg KH <greg@kroah.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kay Sievers 提交于
Since 43cc71ee, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable watchdog drivers, to re-enable auto loading. [dbrownell@users.sourceforge.net: more drivers; registration fixes] Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kay Sievers 提交于
Since 43cc71ee, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable USB HCDs, to allow re-enable auto loading. [dbrownell@users.sourceforge.net: more drivers; registration fixes] Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kay Sievers 提交于
Since 43cc71ee, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable usb peripheral drivers, to re-eable module auto loading. [dbrownell@users.sourceforge.net: registration fixes] Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kay Sievers 提交于
Since 43cc71ee, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable SPI platform drivers, to allow module auto loading. [dbrownell@users.sourceforge.net: more drivers: registration fixes] Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Davide Libenzi 提交于
Jeff Roberson discovered a race when using kaio eventfd based notifications. When it occurs it can lead tomissed wakeups and hung userspace. This patch fixes the race by moving the notification inside the spinlocked section of kaio. The operation is safe since eventfd spinlock and kaio one are unrelated. Signed-off-by: NDavide Libenzi <davidel@xmailserver.org> Cc: Zach Brown <zach.brown@oracle.com> Cc: Jeff Roberson <jroberson@chesapeake.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
rtc-s35390a uses BITREVERSE functions so it needs to select that config symbol to ensure that the functions are built. drivers/built-in.o: In function `s35390a_set_datetime': linux-2.6.25-rc8-git7/drivers/rtc/rtc-s35390a.c:144: undefined reference to `byte_rev_table' drivers/built-in.o: In function `s35390a_get_datetime': linux-2.6.25-rc8-git7/drivers/rtc/rtc-s35390a.c:163: undefined reference to `byte_rev_table' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Acked-by: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Paul Menage 提交于
Extend the /proc/<pid>/cgroup file to include the appropriate hierarchy ID on each line. Currently this ID isn't really needed since a hierarchy can be completely identified by the set of subsystems bound to it, but this is likely to change in the near future in order to support stateless subsystems and merging/rebinding of subsystems. Getting this change into 2.6.25 reduces the need for an API change later. Signed-off-by: NPaul Menage <menage@google.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
It's really a pretty ugly thing to need, and some day it will hopefully be obviated by teaching gcc about the magic calling conventions for the low-level system call code, but in the meantime we can at least add big honking comments about why we need these insane and strange macros. I took my comments from my version of the macro, but I ended up deciding to just pick Roland's version of the actual code instead (with his prettier syntax that uses vararg macros). Thus the previous two commits that actually implement it. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Roland McGrath 提交于
Use asmlinkage_protect in sys_io_getevents, because GCC for i386 with CONFIG_FRAME_POINTER=n can decide to clobber an argument word on the stack, i.e. the user struct pt_regs. Here the problem is not a tail call, but just the compiler's use of the stack when it inlines and optimizes the body of the called function. This seems to avoid it. Signed-off-by: NRoland McGrath <roland@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Roland McGrath 提交于
The prevent_tail_call() macro works around the problem of the compiler clobbering argument words on the stack, which for asmlinkage functions is the caller's (user's) struct pt_regs. The tail/sibling-call optimization is not the only way that the compiler can decide to use stack argument words as scratch space, which we have to prevent. Other optimizations can do it too. Until we have new compiler support to make "asmlinkage" binding on the compiler's own use of the stack argument frame, we have work around all the manifestations of this issue that crop up. More cases seem to be prevented by also keeping the incoming argument variables live at the end of the function. This makes their original stack slots attractive places to leave those variables, so the compiler tends not clobber them for something else. It's still no guarantee, but it handles some observed cases that prevent_tail_call() did not. Signed-off-by: NRoland McGrath <roland@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Venki Pallipadi 提交于
This patch also resolves hangs on boot: http://lkml.org/lkml/2008/2/23/263 http://bugzilla.kernel.org/show_bug.cgi?id=10093 The bug was causing once-in-few-reboots 10-15 sec wait during boot on certain laptops. Earlier commit 40d6a146 added smp_call_function in cpu_idle_wait() to kick cpus that are in tickless idle. Looking at cpu_idle_wait code at that time, code seemed to be over-engineered for a case which is rarely used (while changing idle handler). Below is a simplified version of cpu_idle_wait, which just makes a dummy smp_call_function to all cpus, to make them come out of old idle handler and start using the new idle handler. It eliminates code in the idle loop to handle cpu_idle_wait. Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Harvey Harrison 提交于
Shift of a LE value seems strange, probably meant to shift the cpu-order variable as in the prvious section of the switch statement. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Acked-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
Don't make smp_{r,w,}mb() interpolate a MEMBAR instruction when CONFIG_SMP=n as SMP memory barries on UP systems should interpolate a compiler barrier only. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
Make NOMMU-mode work with base addresses other than 0xC0000000 by: (1) Giving the code that sets up the protection registers the right address in __sdram_base. Rather than being hard coded to 0xC0000000, the value of __page_offset is obtained from the linker script. (2) Eliminate the check in __switch_to() that verifies the current thread info is in the 0xCxxxxxxx region. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
Use traps 120-126 to emulate atomic cmpxchg32, xchg32, and XOR-, OR-, AND-, SUB- and ADD-to-memory operations for userspace. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
Move STACK_TOP_MAX up so that we don't try moving the stack above it as that causes setup_arg_pages() to malfunction. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
Handle update_mmu_cache() being called when current->mm is NULL. We cache static TLB mappings for the current page table in DAMPR4 and DAMPR5 on the theory that the next data lookup is likely to be in the same general region, and thus is likely to be mapped by the same page table. However, we can't get this information if we can't access the appropriate mm_struct. If current->mm is NULL, we just clear the cache in the knowledge that the TLB miss handlers will load it. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://oss.sgi.com:8090/xfs/xfs-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6: [XFS] Ensure "both" features2 slots are consistent [XFS] Fix superblock features2 field alignment problem [XFS] remove shouting-indirection macros from xfs_sb.h
-
git://git.kernel.dk/linux-2.6-block由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: cfq-iosched: do not leak ioc_data across iosched switches splice: fix infinite loop in generic_file_splice_read()
-
由 Roman Zippel 提交于
Some time ago while attempting to handle invalid link counts, I botched the unlink of links itself, so this patch fixes this now correctly, so that only the link count of nodes that don't point to links is ignored. Thanks to Vlado Plaga <rechner@vlado-do.de> to notify me of this problem. Signed-off-by: NRoman Zippel <zippel@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 10 4月, 2008 8 次提交
-
-
由 Fabio Checconi 提交于
When switching scheduler from cfq, cfq_exit_queue() does not clear ioc->ioc_data, leaving a dangling pointer that can deceive the following lookups when the iosched is switched back to cfq. The pattern that can trigger that is the following: - elevator switch from cfq to something else; - module unloading, with elv_unregister() that calls cfq_free_io_context() on ioc freeing the cic (via the .trim op); - module gets reloaded and the elevator switches back to cfq; - reallocation of a cic at the same address as before (with a valid key). To fix it just assign NULL to ioc_data in __cfq_exit_single_io_context(), that is called from the regular exit path and from the elevator switching code. The only path that frees a cic and is not covered is the error handling one, but cic's freed in this way are never cached in ioc_data. Signed-off-by: NFabio Checconi <fabio@gandalf.sssup.it> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Eric Sandeen 提交于
Since older kernels may look in the sb_bad_features2 slot for flags, rather than zeroing it out on fixup, we should make it equal to the sb_features2 value. Also, if the ATTR2 flag was not found prior to features2 fixup, it was not set in the mount flags, so re-check after the fixup so that the current session will use the feature. Also fix up the comments to reflect these changes. SGI-PV: 980085 SGI-Modid: xfs-linux-melb:xfs-kern:30778a Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 David Chinner 提交于
Due to the xfs_dsb_t structure not being 64 bit aligned, the last field of the on-disk superblock can vary in location This causes problems when the filesystem gets moved to a different platform, or there is a 32 bit userspace and 64 bit kernel. This patch detects the defect at mount time, logs a warning such as: XFS: correcting sb_features alignment problem in dmesg and corrects the problem so that everything is OK. it also blacklists the bad field in the superblock so it does not get used for something else later on. SGI-PV: 977636 SGI-Modid: xfs-linux-melb:xfs-kern:30539a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Eric Sandeen 提交于
Remove macro-to-small-function indirection from xfs_sb.h, and remove some which are completely unused. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30528a Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NDonald Douwsma <donaldd@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Jens Axboe 提交于
There's a quirky loop in generic_file_splice_read() that could go on indefinitely, if the file splice returns 0 permanently (and not just as a temporary condition). Get rid of the loop and pass back -EAGAIN correctly from __generic_file_splice_read(), so we handle that condition properly as well. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Steven Rostedt 提交于
gcc expects all toplevel assembly to return to the original section type. The code in alteranative.c does not do this. This caused some strange bugs in sched-devel where code would end up in the .rodata section and when the kernel sets the NX bit on all .rodata, the kernel would crash when executing this code. This patch adds a .previous marker to return the code back to the original section. Credit goes to Andrew Pinski for telling me it wasn't a gcc bug but a bug in the toplevel asm code in the kernel. ;-) Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6: SELinux: don't BUG if fs reuses a superblock
-
由 Eric Paris 提交于
I (wrongly) assumed that nfs_xdev_get_sb() would not ever share a superblock and so cloning mount options would always be correct. Turns out that isn't the case and we could fall over a BUG_ON() that wasn't a BUG at all. Since there is little we can do to reconcile different mount options this patch just leaves the sb alone and the first set of options wins. Signed-off-by: NEric Paris <eparis@redhat.com> Acked-by: NStephen Smalley <sds@tycho.nsa.gov> Acked-by: NTrond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: NJames Morris <jmorris@namei.org>
-
- 09 4月, 2008 9 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ata/sata_fsl: Remove unused variable in sata_fsl_probe pata_sil680: Fix build on arch/ppc
-
由 Johann Felix Soden 提交于
In sata_fsl_probe memory is allocated but never used or deallocated. Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=10404 Thanks to Daniel Marjamäki for the bug report. Reported-by: NDaniel Marjamäki <danielm77@spray.se> Signed-off-by: NJohann Felix Soden <johfel@users.sourceforge.net> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Benjamin Herrenschmidt 提交于
Commit 0f436eff breaks build on arch/ppc as it doesn't implement the machine_is() macro. This fixes it by using CONFIG_PPC_MERGE instead which represents arch/powerpc only, while CONFIG_PPC is set for both. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
git://git.linux-nfs.org/projects/trondmy/nfs-2.6由 Linus Torvalds 提交于
* 'hotfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: SUNRPC: Fix a memory leak in rpc_create() fix bug - executing FDPIC ELF on NFS mount triggers BUG() at mm/nommu.c:862:/do_mmap_private() NFS: initialize flags field in nfs_open_context SUNRPC: don't call flush_dcache_page() with an invalid pointer
-
由 Dmitry Adamushko 提交于
cfi_amdstd_sync() and cfi_staa_sync() call schedule() without changing task's state appropriately. In case of e.g. chip->state == FL_ERASING, cfi_*_sync() will be busy-looping either redundantly for a fixed interval of time (for SCHED_NORMAL tasks) or possibly endlessly (for RT tasks and UP). Signed-off-by: NDmitry Adamushko <dmitry.adamushko@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Hennerich 提交于
Remove unused label, and associated compiler warning. Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NBryan Wu <cooloney@kernel.org> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Brownell 提交于
Update SPI documentation to clarify some areas of recent confusion: clock polarity takes effect when chipselect goes active; and zero length buffers are OK in certain cases. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vitja Makarov 提交于
Fix bug in SPI probe: first initialize peripheral pins, and just after register spi master device. This fixes problems with SPI drivers built-in kernel. Singed-off-by: NVitja Makarov <vitja.makarov@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Frysinger 提交于
Fix breakage cause by overzealous line wrapping; there should be only one format string. Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-