All vtime implementations just flush the user time on process
tick. Consolidate that in generic code by calling a user time
accounting helper. This avoids an indirect call in ia64 and
prepare to also consolidate vtime context switch code.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>

Prepending irq-unsafe vtime APIs with underscores was actually
a bad idea as the result is a big mess in the API namespace that
is even waiting to be further extended. Also these helpers
are always called from irq safe callers except kvm. Just
provide a vtime_account_system_irqsafe() for this specific
case so that we can remove the underscore prefix on other
vtime functions.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>

Switching to or from guest context is done on ioctl context.
So by the time we call kvm_guest_enter() or kvm_guest_exit()
we know we are not running the idle task.

As a result, we can directly account the cputime using
vtime_account_system().

There are two good reasons to do this:

* We avoid some useless checks on guest switch. It optimizes
a bit this fast path.

* In the case of CONFIG_IRQ_TIME_ACCOUNTING, calling vtime_account()
checks for irq time to account. This is pointless since we know
we are not in an irq on guest switch. This is wasting cpu cycles
for no good reason. vtime_account_system() OTOH is a no-op in
this config option.

* We can remove the irq disable/enable around kvm guest switch in s390.

A further optimization may consist in introducing a vtime_account_guest()
that directly calls account_guest_time().
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Xiantao Zhang <xiantao.zhang@intel.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>

vtime_account_system() currently has only one caller with
vtime_account() which is irq safe.

Now we are going to call it from other places like kvm where
irqs are not always disabled by the time we account the cputime.

So let's make it irqsafe. The arch implementation part is now
prefixed with "__".

vtime_account_idle() arch implementation is prefixed accordingly
to stay consistent.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>

... and fix the race in updating unaligned control ones
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

These are now provided in <asm-generic/module.h>, so clean up warnings
by not re-defining them in module.c.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>

The tile tool chain uses the .eh_frame information for backtracing.
The vmlinux build drops any .eh_frame sections at link time, but when
present in kernel modules, it causes a module load failure due to the
presence of unsupported pc-relative relocations.  When compiling to
use compiler feedback support, the compiler by default omits .eh_frame
information, so we don't see this problem.  But when not using feedback,
we need to explicitly suppress the .eh_frame.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
Cc: stable@vger.kernel.org

KVM_PV_REASON_PAGE_NOT_PRESENT kicks cpu out of idleness, but we haven't
marked that spot as an exit from idleness.

Not doing so can cause RCU warnings such as:

[  732.788386] ===============================
[  732.789803] [ INFO: suspicious RCU usage. ]
[  732.790032] 3.7.0-rc1-next-20121019-sasha-00002-g6d8d02d-dirty #63 Tainted: G        W
[  732.790032] -------------------------------
[  732.790032] include/linux/rcupdate.h:738 rcu_read_lock() used illegally while idle!
[  732.790032]
[  732.790032] other info that might help us debug this:
[  732.790032]
[  732.790032]
[  732.790032] RCU used illegally from idle CPU!
[  732.790032] rcu_scheduler_active = 1, debug_locks = 1
[  732.790032] RCU used illegally from extended quiescent state!
[  732.790032] 2 locks held by trinity-child31/8252:
[  732.790032]  #0:  (&rq->lock){-.-.-.}, at: [<ffffffff83a67528>] __schedule+0x178/0x8f0
[  732.790032]  #1:  (rcu_read_lock){.+.+..}, at: [<ffffffff81152bde>] cpuacct_charge+0xe/0x200
[  732.790032]
[  732.790032] stack backtrace:
[  732.790032] Pid: 8252, comm: trinity-child31 Tainted: G        W    3.7.0-rc1-next-20121019-sasha-00002-g6d8d02d-dirty #63
[  732.790032] Call Trace:
[  732.790032]  [<ffffffff8118266b>] lockdep_rcu_suspicious+0x10b/0x120
[  732.790032]  [<ffffffff81152c60>] cpuacct_charge+0x90/0x200
[  732.790032]  [<ffffffff81152bde>] ? cpuacct_charge+0xe/0x200
[  732.790032]  [<ffffffff81158093>] update_curr+0x1a3/0x270
[  732.790032]  [<ffffffff81158a6a>] dequeue_entity+0x2a/0x210
[  732.790032]  [<ffffffff81158ea5>] dequeue_task_fair+0x45/0x130
[  732.790032]  [<ffffffff8114ae29>] dequeue_task+0x89/0xa0
[  732.790032]  [<ffffffff8114bb9e>] deactivate_task+0x1e/0x20
[  732.790032]  [<ffffffff83a67c29>] __schedule+0x879/0x8f0
[  732.790032]  [<ffffffff8117e20d>] ? trace_hardirqs_off+0xd/0x10
[  732.790032]  [<ffffffff810a37a5>] ? kvm_async_pf_task_wait+0x1d5/0x2b0
[  732.790032]  [<ffffffff83a67cf5>] schedule+0x55/0x60
[  732.790032]  [<ffffffff810a37c4>] kvm_async_pf_task_wait+0x1f4/0x2b0
[  732.790032]  [<ffffffff81139e50>] ? abort_exclusive_wait+0xb0/0xb0
[  732.790032]  [<ffffffff81139c25>] ? prepare_to_wait+0x25/0x90
[  732.790032]  [<ffffffff810a3a66>] do_async_page_fault+0x56/0xa0
[  732.790032]  [<ffffffff83a6a6e8>] async_page_fault+0x28/0x30
Signed-off-by: NSasha Levin <sasha.levin@oracle.com>
Acked-by: NGleb Natapov <gleb@redhat.com>
Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NGleb Natapov <gleb@redhat.com>
Reviewed-by: NChegu Vinod  <chegu_vinod@hp.com>
Tested-by: NChegu Vinod <chegu_vinod@hp.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

We can not directly call kvm_release_pfn_clean to release the pfn
since we can meet noslot pfn which is used to cache mmio info into
spte
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAvi Kivity <avi@redhat.com>

An interesting effect of using the generic version of linkage.h
is that the padding is defined in terms of x86 NOPs, which can have
even more interesting effects when the assembly code looks like this:

ENTRY(func1)
	mov	x0, xzr
ENDPROC(func1)
	// fall through
ENTRY(func2)
	mov	x0, #1
	ret
ENDPROC(func2)

Admittedly, the code is not very nice. But having code from another
architecture doesn't look completely sane either.

The fix is to add arm64's version of linkage.h, which causes the insertion
of proper AArch64 NOPs.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Initializing uncore PMU on virtualized CPU may hang the kernel.
This is because kvm does not emulate the entire hardware. Thers
are lots of uncore related MSRs, making kvm enumerate them all
is a non-trival task. So just disable uncore on virtualized CPU.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Tested-by: NPekka Enberg <penberg@kernel.org>
Cc: a.p.zijlstra@chello.nl
Cc: eranian@google.com
Cc: andi@firstfloor.org
Cc: avi@redhat.com
Link: http://lkml.kernel.org/r/1345540117-14164-1-git-send-email-zheng.z.yan@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

In 32 bit guests, if a userspace process has %eax == -ERESTARTSYS
(-512) or -ERESTARTNOINTR (-513) when it is interrupted by an event
/and/ the process has a pending signal then %eip (and %eax) are
corrupted when returning to the main process after handling the
signal.  The application may then crash with SIGSEGV or a SIGILL or it
may have subtly incorrect behaviour (depending on what instruction it
returned to).

The occurs because handle_signal() is incorrectly thinking that there
is a system call that needs to restarted so it adjusts %eip and %eax
to re-execute the system call instruction (even though user space had
not done a system call).

If %eax == -514 (-ERESTARTNOHAND (-514) or -ERESTART_RESTARTBLOCK
(-516) then handle_signal() only corrupted %eax (by setting it to
-EINTR).  This may cause the application to crash or have incorrect
behaviour.

handle_signal() assumes that regs->orig_ax >= 0 means a system call so
any kernel entry point that is not for a system call must push a
negative value for orig_ax.  For example, for physical interrupts on
bare metal the inverse of the vector is pushed and page_fault() sets
regs->orig_ax to -1, overwriting the hardware provided error code.

xen_hypervisor_callback() was incorrectly pushing 0 for orig_ax
instead of -1.

Classic Xen kernels pushed %eax which works as %eax cannot be both
non-negative and -RESTARTSYS (etc.), but using -1 is consistent with
other non-system call entry points and avoids some of the tests in
handle_signal().

There were similar bugs in xen_failsafe_callback() of both 32 and
64-bit guests. If the fault was corrected and the normal return path
was used then 0 was incorrectly pushed as the value for orig_ax.
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
Acked-by: NJan Beulich <JBeulich@suse.com>
Acked-by: NIan Campbell <ian.campbell@citrix.com>
Cc: stable@vger.kernel.org
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

This makes common code less ifdef-y and is consistent with PVHVM on
x86.

Also note that phys_to_machine_mapping_valid should take a pfn
argument and make it do so.

Add __set_phys_to_machine, make set_phys_to_machine a simple wrapper
(on systems with non-nop implementations the outer one can allocate
new p2m pages).

Make __set_phys_to_machine check for identity mapping or invalid only.
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

This correctly sizes it as 64 bit on ARM but leaves it as unsigned
long on x86 (therefore no intended change on x86).

The long and ulong guest handles are now unused (and a bit dangerous)
so remove them.
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Define PRI macros for xen_ulong_t and xen_pfn_t and use to fix:
drivers/xen/sys-hypervisor.c:288:4: warning: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'xen_ulong_t' [-Wformat]

Ideally this would use PRIx64 on ARM but these (or equivalent) don't
seem to be available in the kernel.
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Remove duplicated include.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)

CC: stable@vger.kernel.org
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Add the following system calls to the syscall table:

fallocate
sendmmsg
umount2
syncfs
epoll_create1
inotify_init1
signalfd4
dup3
pipe2
timerfd_create
timerfd_settime
timerfd_gettime
eventfd2
preadv
pwritev
fanotify_init
fanotify_mark
process_vm_readv
process_vm_writev
name_to_handle_at
open_by_handle_at
sync_file_range
perf_event_open
rt_tgsigqueueinfo
clock_adjtime
prlimit64
kcmp

Note that we have to use the 'sys_sync_file_range2' version, so that
the 64-bit arguments are aligned correctly to the argument registers.
Signed-off-by: NChris Zankel <chris@zankel.net>

Fix two compiler warnings complaining about truncating a value on
a 64-bit host, and about declaring an unused variable that is only
used for a specific configuration.
Signed-off-by: NChris Zankel <chris@zankel.net>

Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NGreg Ungerer <gerg@uclinux.org>

450cc201 ("x86/mce: Provide boot argument to honour bios-set CMCI
threshold") added the bios_cmci_threshold sysfs attribute which was
supposed to communicate to userspace tools that BIOS CMCI threshold has
been honoured.

However, this info is not of any importance to userspace - it should
rather get the actual error count it has been thresholded already from
MCi_STATUS[38:52].

So drop this before it becomes a used interface (good thing we caught
this early in 3.7-rc1, right after the merge window closed).

Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: NTony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20121017105940.GA14590@x1.osrc.amd.comSigned-off-by: NBorislav Petkov <borislav.petkov@amd.com>

It turns out that S390 shouldn't use uapi/asm-generic/kvm_para.h since it
defines the functions in its non-UAPI kvm_para.h file.

#including <asm-generic/kvm_para.h> will first pick up
include/asm-generic/kvm_para.h, which defines conflicting functions.

Instead, partially revert commit 0420c87e,
ungenericising this file and just inserting a comment to prevent the patch
program from deleting it.

cc: Yuanhan Liu <yuanhan.liu@intel.com>
cc: fengguang.wu@intel.com
Reported-by: NYuanhan Liu <yuanhan.liu@intel.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Make arch/ia64/include/asm/kvm_para.h generic since it's the same as the
asm-generic version.  This deals with the problem when ia64 is compiled with
allmodconfig you get:

In file included from include/uapi/linux/kvm_para.h:26:0,
                 from include/linux/kvm_para.h:4,
                 from kernel/watchdog.c:28:
arch/ia64/include/asm/kvm_para.h:24:28: error: redefinition of 'kvm_arch_para_features'
include/asm-generic/kvm_para.h:16:28: note: previous definition of 'kvm_arch_para_features' was here
arch/ia64/include/asm/kvm_para.h:29:20: error: redefinition of 'kvm_check_and_clear_guest_paused'
include/asm-generic/kvm_para.h:11:20: note: previous definition of 'kvm_check_and_clear_guest_paused' was here

This does not happen for ia64 defconfig.
Reported-by: NYuanhan Liu <yuanhan.liu@intel.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
cc: Yuanhan Liu <yuanhan.liu@intel.com>
cc: fengguang.wu@intel.com
Signed-off-by: NTony Luck <tony.luck@intel.com>

Code Aurora Forum (CAF) is becoming a part of Linux Foundation Labs.
Signed-off-by: NRichard Kuo <rkuo@codeaurora.org>

Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NMichael Kerrisk <mtk.manpages@gmail.com>
Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: NDave Jones <davej@redhat.com>
Signed-off-by: NRichard Kuo <rkuo@codeaurora.org>

Calling convention for internal functions and 'asmlinkage' functions is
different on x86-32. Therefore do not directly cast aesni_enc as XTS tweak
function, but use wrapper function in between. Fixes crash with "XTS +
aesni_intel + x86-32" combination.

Cc: stable@vger.kernel.org
Reported-by: NKrzysztof Kolasa <kkolasa@winsoft.pl>
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If a debugger tries to zero a hardware debug control register, the
kernel will try to infer both the type and length of the breakpoint
in order to sanity-check against the requested regset type. This will
fail because the encoding will appear as a zero-length breakpoint.

This patch changes the control register setting so that disabled
breakpoints are treated as HW_BREAKPOINT_EMPTY and no further
sanity-checking is required.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

The user_hwdebug_state structure contains implicit padding to conform to
the alignment requirements of the AArch64 ABI (namely that aggregates
must be aligned to their most aligned member).

This patch fixes the ptrace functions operating on struct
user_hwdebug_state so that the padding is handled correctly.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

For historical reasons, ARM used to set r0-r2 in start_thread() to the
first values on the user stack when starting a new user application. The
same logic has been inherited in AArch64. The x0 register is overridden
by the sys_execve() return value so it's always zero on success. The x1
and x2 registers are ignored by AArch64 and EABI AArch32 applications,
so we can safely remove the register setting for both native and compat
user space.

This also fixes a potential fault with the kernel accessing user space
stack directly.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Reported-by: NAl Viro <viro@zeniv.linux.org.uk>

According to Documentation/arm64/booting.txt, the kernel image must be
loaded at a pre-defined offset from the start of RAM so that the kernel
can calculate PHYS_OFFSET based on this address. If the DT contains
memory blocks below this PHYS_OFFSET, report them and ignore the
corresponding memory range.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

With commit 576094b7 (time: Introduce new GENERIC_TIME_VSYSCALL) the old
update_vsyscall() prototype is no longer available. This patch updates
the arm64 port.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Cc: John Stultz <john.stultz@linaro.org>

With commit 786d35d4 (make most arch asm/module.h files use
asm-generic/module.h) arm64 needs to enable MODULES_USE_ELF_RELA for
loadable modules.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NWill Deacon <Will.Deacon@arm.com>

Change event type to switch for the power and autopower switches.
Additionally, this patch aligns the keycodes with the other linkstation
boards already supported by linux.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>

Don't use the specific board name in a the common device tree include file.
Instead use the common name 'lsxl'.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>

Move the CACHE_FEROCEON_L2 test to kirkwood_l2_init, since linking
fails on the reference to feroceon_l2_init.
Signed-off-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>

The sysfs and procfs output of the instruction and data caches were
wrong: the output of the data cache provided that instruction cache
values and vice versa.
Fix this by using the correct type indication when issueing the
ecag instruction.
Reported-by: NAndreas Krebbel <Andreas.Krebbel@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Because of a change in the s390 arch backend of binutils (commit 23ecd77
"Pick the default arch depending on the target size" in binutils repo)
31 bit builds will fail since the linker would now try to create 64 bit
binary output.
Fix this by setting OUTPUT_ARCH to s390:31-bit instead of s390.
Thanks to Andreas Krebbel for figuring out the issue.

Fixes this build error:

  LD      init/built-in.o
s390x-4.7.2-ld: s390:31-bit architecture of input file
 `arch/s390/kernel/head.o' is incompatible with s390:64-bit output

Cc: Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Add missing select statement to arch/s390/Kconfig.
Signed-off-by: NGerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The 0x10000 entry point can be called in z/Arch architecture and 64 bit
addressing mode. Therefore this patch removes the unnecessary 31 bit
switch code from the kdump startup function.
Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>