...and rename it to better describe how it works.

In order to fix a use-after-free in NFS, we need to be able to remove
locks from an inode after the filp associated with them may have already
been freed. flock_lock_file already only dereferences the filp to get to
the inode, so just change it so the callers do that.

All of the callers already pass in a lock request that has the fl_file
set properly, so we don't need to pass it in individually. With that
change it now only dereferences the filp to get to the inode, so just
push that out to the callers.
Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
Reviewed-by: N"J. Bruce Fields" <bfields@fieldses.org>
Tested-by: N"J. Bruce Fields" <bfields@fieldses.org>

This reverts commit db2efec0.

William reported that he was seeing instability with this patch, which
is likely due to the fact that it can cause the kernel to take a new
reference to a filp after the last reference has already been put.

Revert this patch for now, as we'll need to fix this in another way.

Cc: stable@vger.kernel.org
Reported-by: NWilliam Dauchy <william@gandi.net>
Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
Reviewed-by: N"J. Bruce Fields" <bfields@fieldses.org>
Tested-by: N"J. Bruce Fields" <bfields@fieldses.org>

Pull parisc fixes from Helge Deller:
 "We have one important patch from Dave Anglin and myself which fixes
  PTE/TLB race conditions which caused random segmentation faults on our
  debian buildd servers, and one patch from Alex Ivanov which speeds up
  the graphical text console on the STI framebuffer driver"

* 'parisc-4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix some PTE/TLB race conditions and optimize __flush_tlb_range based on timing results
  stifb: Implement hardware accelerated copyarea

Pull arm64 fixes and clean-up from Catalin Marinas:
 - ACPI fix when checking the validity of the GICC MADT subtable
 - handle debug exceptions in the el*_inv exception entries
 - remove pointless register assignment in two compat syscall wrappers
 - unnecessary include path
 - defconfig update

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: entry32: remove pointless register assignment
  arm64: entry: handle debug exceptions in el*_inv
  arm64: Keep the ARM64 Kconfig selects sorted
  ACPI / ARM64 : use the new BAD_MADT_GICC_ENTRY macro
  ACPI / ARM64: add BAD_MADT_GICC_ENTRY() macro
  arm64: defconfig: Add Ceva ahci to the defconfig
  arm64: remove another unnecessary libfdt include path

The increased use of pdtlb/pitlb instructions seemed to increase the
frequency of random segmentation faults building packages. Further, we
had a number of cases where TLB inserts would repeatedly fail and all
forward progress would stop. The Haskell ghc package caused a lot of
trouble in this area. The final indication of a race in pte handling was
this syslog entry on sibaris (C8000):

 swap_free: Unused swap offset entry 00000004
 BUG: Bad page map in process mysqld  pte:00000100 pmd:019bbec5
 addr:00000000ec464000 vm_flags:00100073 anon_vma:0000000221023828 mapping: (null) index:ec464
 CPU: 1 PID: 9176 Comm: mysqld Not tainted 4.0.0-2-parisc64-smp #1 Debian 4.0.5-1
 Backtrace:
  [<0000000040173eb0>] show_stack+0x20/0x38
  [<0000000040444424>] dump_stack+0x9c/0x110
  [<00000000402a0d38>] print_bad_pte+0x1a8/0x278
  [<00000000402a28b8>] unmap_single_vma+0x3d8/0x770
  [<00000000402a4090>] zap_page_range+0xf0/0x198
  [<00000000402ba2a4>] SyS_madvise+0x404/0x8c0

Note that the pte value is 0 except for the accessed bit 0x100. This bit
shouldn't be set without the present bit.

It should be noted that the madvise system call is probably a trigger for many
of the random segmentation faults.

In looking at the kernel code, I found the following problems:

1) The pte_clear define didn't take TLB lock when clearing a pte.
2) We didn't test pte present bit inside lock in exception support.
3) The pte and tlb locks needed to merged in order to ensure consistency
between page table and TLB. This also has the effect of serializing TLB
broadcasts on SMP systems.

The attached change implements the above and a few other tweaks to try
to improve performance. Based on the timing code, TLB purges are very
slow (e.g., ~ 209 cycles per page on rp3440). Thus, I think it
beneficial to test the split_tlb variable to avoid duplicate purges.
Probably, all PA 2.0 machines have combined TLBs.

I dropped using __flush_tlb_range in flush_tlb_mm as I realized all
applications and most threads have a stack size that is too large to
make this useful. I added some comments to this effect.

Since implementing 1 through 3, I haven't had any random segmentation
faults on mx3210 (rp3440) in about one week of building code and running
as a Debian buildd.
Signed-off-by: NJohn David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: NHelge Deller <deller@gmx.de>

This patch adds hardware assisted scrolling. The code is based upon the
following investigation: https://parisc.wiki.kernel.org/index.php/NGLE#Blitter

A simple 'time ls -la /usr/bin' test shows 1.6x speed increase over soft
copy and 2.3x increase over FBINFO_READS_FAST (prefer soft copy over
screen redraw) on Artist framebuffer.
Signed-off-by: NAlex Ivanov <lausgans@gmail.com>
Signed-off-by: NHelge Deller <deller@gmx.de>

Pull powerpc fixes from Michael Ellerman:
 - opal-prd mmap fix from Vaidy
 - set kernel taint for MCEs from Daniel
 - alignment exception description from Anton
 - ppc4xx_hsta_msi build fix from Daniel
 - opal-elog interrupt fix from Alistair
 - core_idle_state race fix from Shreyas
 - hv-24x7 lockdep fix from Sukadev
 - multiple cxl fixes from Daniel, Ian, Mikey & Maninder
 - update MAINTAINERS to point at shared tree

* tag 'powerpc-4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  cxl: Check if afu is not null in cxl_slbia
  powerpc: Update MAINTAINERS to point at shared tree
  powerpc/perf/24x7: Fix lockdep warning
  cxl: Fix off by one error allowing subsequent mmap page to be accessed
  cxl: Fail mmap if requested mapping is larger than assigned problem state area
  cxl: Fix refcounting in kernel API
  powerpc/powernv: Fix race in updating core_idle_state
  powerpc/powernv: Fix opal-elog interrupt handler
  powerpc/ppc4xx_hsta_msi: Include ppc-pci.h to fix reference to hose_list
  powerpc: Add plain English description for alignment exception oopses
  cxl: Test the correct mmio space before unmapping
  powerpc: Set the correct kernel taint on machine check errors
  cxl/vphb.c: Use phb pointer after NULL check
  powerpc/powernv: Fix vma page prot flags in opal-prd driver

We currently set x27 in compat_sys_sigreturn_wrapper and
compat_sys_rt_sigreturn_wrapper, similarly to what we do with r8/why on
32-bit ARM, in an attempt to prevent sigreturns from being restarted.

However, on arm64 we have always used pt_regs::syscallno for syscall
restarting (for both native and compat tasks), and x27 is never
inspected again before being overwritten in kernel_exit.

This patch removes the pointless register assignments.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

The pointer to an AFU in the adapter's list of AFUs can be null
if we're in the process of removing AFUs. The afu_list_lock
doesn't guard against this.

Say we have 2 slices, and we're in the process of removing cxl.
 - We remove the AFUs in order (see cxl_remove). In cxl_remove_afu
   for AFU 0, we take the lock, set adapter->afu[0] = NULL, and
   release the lock.
 - Then we get an slbia. In cxl_slbia we take the lock, and set
   afu = adapter->afu[0], which is NULL.
 - Therefore our attempt to check afu->enabled will blow up.

Therefore, check if afu is a null pointer before dereferencing it.

Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Axtens <dja@axtens.net>
Acked-by: NMichael Neuling <mikey@neuling.org>
Acked-by: NIan Munsie <imunsie@au1.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Merge hpfs updates from Mikulas Patocka.

Mainly fstrim support, with some minor other cleanups.

These were actually sent during the merge window, but I wanted to wait
for the FSTRIM compat handling cleanup before applying them.  Mikulas
sent that earlier today.

* emailed patches from Mikulas Patocka <mikulas@twibright.com>:
  hpfs: hpfs_error: Remove static buffer, use vsprintf extension %pV instead
  hpfs: kstrdup() out of memory handling
  hpfs: Remove unessary cast
  hpfs: add fstrim support

Removing unnecessary static buffers is good.
Use the vsprintf %pV extension instead.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMikulas Patocka <mikulas@twibright.com>
Cc: stable@vger.kernel.org      # v2.6.36+
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is a possibility of nothing being allocated to the new_opts in
case of memory pressure, therefore return ENOMEM for such case.
Signed-off-by: NSanidhya Kashyap <sanidhya.gatech@gmail.com>
Signed-off-by: NMikulas Patocka <mikulas@twibright.com>
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Avoid a pointless kmem_cache_alloc() return value cast in
fs/hpfs/super.c::hpfs_alloc_inode()
Signed-off-by: NFiro Yang <firogm@gmail.com>
Signed-off-by: NMikulas Patocka <mikulas@twibright.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds support for fstrim to the HPFS filesystem.
Signed-off-by: NMikulas Patocka <mikulas@twibright.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull Ceph fixes from Sage Weil:
 "There is a fix for CephFS and RBD when used within containers/namespaces,
   and a fix for the address learning the client is supposed to do when
  initially talking to the Ceph cluster.

  There are also two patches updating MAINTAINERS.  One breaks out the
  common Ceph code shared by fs/ceph and drivers/block/rbd.c into a
  separate entry with the appropriate maintainers listed.  The second
  adds a second reference to the github tree where the Ceph client
  development takes place (before it is pushed to korg and then to you).

  The goal here is to move closer to a situation where Ilya Dryomov or
  one of the other maintainers can push things to you if I am
  unavailable.  Ilya has done most of the work preparing branches for
  upstream recently; you should not be surprised to hear from him if I
  am trapped in some internet-less wasteland or hit by a bus or
  something.  In the meantime, we'll work on getting him added to the
  kernel web of trust"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  MAINTAINERS: add secondary tree for ceph modules
  MAINTAINERS: update ceph entries
  libceph: treat sockaddr_storage with uninitialized family as blank
  libceph: enable ceph in a non-default network namespace

The FITRIM ioctl has the same arguments on 32-bit and 64-bit
architectures, so we can add it to the list of compatible ioctls and
drop it from compat_ioctl method of various filesystems.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ted Ts'o <tytso@google.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The firmware class uevent function accessed the "fw_priv->buf" buffer
without the proper locking and testing for NULL.  This is an old bug
(looks like it goes back to 2012 and commit 1244691c: "firmware
loader: introduce firmware_buf"), but for some reason it's triggering
only now in 4.2-rc1.

Shuah Khan is trying to bisect what it is that causes this to trigger
more easily, but in the meantime let's just fix the bug since others are
hitting it too (at least Ingo reports having seen it as well).
Reported-and-tested-by: NShuah Khan <shuahkh@osg.samsung.com>
Acked-by: NMing Lei <ming.lei@canonical.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Reading page fault handler code I've noticed that under right
circumstances kernel would map anonymous pages into file mappings: if
the VMA doesn't have vm_ops->fault() and the VMA wasn't fully populated
on ->mmap(), kernel would handle page fault to not populated pte with
do_anonymous_page().

Let's change page fault handler to use do_anonymous_page() only on
anonymous VMA (->vm_ops == NULL) and make sure that the VMA is not
shared.

For file mappings without vm_ops->fault() or shred VMA without vm_ops,
page fault on pte_none() entry would lead to SIGBUS.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NOleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Willy Tarreau <w@1wt.eu>
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The Ceph kernel code is primarily developed in the github tree, and only
pushed to the korg tree before going to Linus.  If Sage is unavailable and
another maintainer needs to push something upstream, pull requests may
originate from the github tree instead of Sage's korg tree.
Signed-off-by: NSage Weil <sage@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

- The Ceph common code is used by both fs/ceph and drivers/block/rbd.
  Add a separate maintainers entry.

- Add Ilya as libceph maintainer and cephfs submaintainer.

- Attribute Documentation/ABI/testing/sysfs-bus-rbd to rbd.

- ceph-devel@vger.kernel.org should be L, not M in rbd entry.
Signed-off-by: NSage Weil <sage@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

addr_is_blank() should return true if family is neither AF_INET nor
AF_INET6.  This is what its counterpart entity_addr_t::is_blank_ip() is
doing and it is the right thing to do: in process_banner() we check if
our address is blank and if it is "learn" it from our peer.  As it is,
we never learn our address and always send out a blank one.  This goes
way back to ceph.git commit dd732cbfc1c9 ("use sockaddr_storage; and
some ipv6 support groundwork") from 2009.

While at at, do not open-code ipv6_addr_any() and use INADDR_ANY
constant instead of 0.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NSage Weil <sage@redhat.com>

Grab a reference on a network namespace of the 'rbd map' (in case of
rbd) or 'mount' (in case of ceph) process and use that to open sockets
instead of always using init_net and bailing if network namespace is
anything but init_net.  Be careful to not share struct ceph_client
instances between different namespaces and don't add any code in the
!CONFIG_NET_NS case.

This is based on a patch from Hong Zhiguo <zhiguohong@tencent.com>.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NSage Weil <sage@redhat.com>

Pull power management and ACPI updates from Rafael Wysocki:
 "These are fixes on top of the previous PM+ACPI pull requests
  (including one fix for a 4.1 regression) and two commits adding
  _CLS-based device enumeration support to the ACPI core and the ATA
  subsystem that waited for the latest ACPICA changes to be merged.

  Specifics:

   - Fix for an ACPI resources management regression introduced during
     the 4.1 cycle (that unfortunately went into -stable) effectively
     reverting the bad commit along with the recent fixups on top of it
     and using an alternative approach to address the underlying issue
     (Rafael J Wysocki).

   - Fix for a memory leak and an incorrect return value in an error
     code path in the ACPI LPSS (Low-Power Subsystem) driver (Rafael J
     Wysocki).

   - Fix for a leftover dangling pointer in an error code path in the
     new wakeup IRQ support code (Rafael J Wysocki).

   - Fix to prevent infinite loops (due to errors in other places) from
     happening in the core generic PM domains support code (Geert
     Uytterhoeven).

   - Hibernation documentation update/clarification (Uwe Geuder).

   - Support for _CLS-based device enumeration in the ACPI core and in
     the ATA subsystem (Suravee Suthikulpanit)"

* tag 'pm+acpi-4.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / wakeirq: Avoid setting power.wakeirq too hastily
  ata: ahci_platform: Add ACPI _CLS matching
  ACPI / scan: Add support for ACPI _CLS device matching
  PM / hibernate: clarify resume documentation
  PM / Domains: Avoid infinite loops in attach/detach code
  ACPI / LPSS: Fix up acpi_lpss_create_device()
  ACPI / PNP: Reserve ACPI resources at the fs_initcall_sync stage

Pull arch/tile fix from Chris Metcalf:
 "This fix eliminates a "section mismatch" warning caused by the new
  __ex_table checking code in modpost"

* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  modpost: work correctly with tile coldtext sections

Pull module fix from Rusty Russell:
 "Single fix: missing rbtree removal in the module load failure path.
  Easy to trigger with bad params.

  Thanks to Peter Zijlstra and Arthur Marsh for going around on this
  one"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  module: Fix load_module() error path

The tilegx and tilepro compilers use .coldtext for their unlikely
executed text section name, so an __attribute__((cold)) function
will (when compiled with higher optimization levels) land in
the .coldtext section.

Modify modpost to add .coldtext to the set of OTHER_TEXT_SECTIONS
so we don't get warnings about referencing such a section in an
__ex_table block, and then also modify arch/tile/lib/memcpy_user_64.c
so that it uses plain ".coldtext" instead of ".coldtext.memcpy".
The latter naming is a relic of an earlier use of -ffunction-sections,
which we no longer use by default.
Signed-off-by: NChris Metcalf <cmetcalf@ezchip.com>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>

The load_module() error path frees a module but forgot to take it out
of the mod_tree, leaving a dangling entry in the tree, causing havoc.

Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reported-by: NArthur Marsh <arthur.marsh@internode.on.net>
Tested-by: NArthur Marsh <arthur.marsh@internode.on.net>
Fixes: 93c2e105 ("module: Optimize __module_address() using a latched RB-tree")
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Currently we enable debug exceptions before reading ESR_EL1 in both
el0_inv and el1_inv. If a debug exception is taken before we read
ESR_EL1, the value will have been corrupted.

As el*_inv is typically fatal, an intervening debug exception results in
misleading debug information being logged to the console, but is not
otherwise harmful.

As with the other entry paths, we can use the ESR_EL1 value stashed
earlier in the exception entry (in x25 for el0_sync{,_compat}, and x1
for el1_sync), giving us better error reporting in this case.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

The "fix" in commit 0b08c5e5 ("audit: Fix check of return value of
strnlen_user()") didn't fix anything, it broke things.  As reported by
Steven Rostedt:

 "Yes, strnlen_user() returns 0 on fault, but if you look at what len is
  set to, than you would notice that on fault len would be -1"

because we just subtracted one from the return value.  So testing
against 0 doesn't test for a fault condition, it tests against a
perfectly valid empty string.

Also fix up the usual braindamage wrt using WARN_ON() inside a
conditional - make it part of the conditional and remove the explicit
unlikely() (which is already part of the WARN_ON*() logic, exactly so
that you don't have to write unreadable code.
Reported-and-tested-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Paul Moore <pmoore@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now that we have a shared powerpc tree on kernel.org, point folks at that
as the primary place to look for powerpc stuff.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The sysfs attributes for the 24x7 counters are dynamically allocated.
Initialize the attributes using sysfs_attr_init() to fix following
warning which occurs when CONFIG_DEBUG_LOCK_VMALLOC=y.

[    0.346249] audit: initializing netlink subsys (disabled)
[    0.346284] audit: type=2000 audit(1436295254.340:1): initialized
[    0.346489] BUG: key c0000000efe90198 not in .data!
[    0.346491] DEBUG_LOCKS_WARN_ON(1)
[    0.346502] ------------[ cut here ]------------
[    0.346504] WARNING: at ../kernel/locking/lockdep.c:3002
[    0.346506] Modules linked in:
Reported-by: NGustavo Luiz Duarte <gustavold@linux.vnet.ibm.com>
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: NGustavo Luiz Duarte <gustavold@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

It was discovered that if a process mmaped their problem state area they
were able to access one page more than expected, potentially allowing
them to access the problem state area of an unrelated process.

This was due to a simple off by one error in the mmap fault handler
introduced in 0712dc7e ("cxl: Fix issues
when unmapping contexts"), which is fixed in this patch.

Cc: stable@vger.kernel.org
Fixes: 0712dc7e ("cxl: Fix issues when unmapping contexts")
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This patch makes the mmap call fail outright if the requested region is
larger than the problem state area assigned to the context so the error
is reported immediately rather than waiting for an attempt to access an
address out of bounds.

Although we never expect users to map more than the assigned problem
state area and are not aware of anyone doing this (other than for
testing), this does have the potential to break users if someone has
used a larger range regardless. I'm submitting it for consideration, but
if this change is not considered acceptable the previous patch is
sufficient to prevent access out of bounds without breaking anyone.
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Pull ARM updates from Russell King:
 "These are late by a week; they should have been merged during the
  merge window, but unfortunately, the ARM kernel build/boot farms were
  indicating random failures, and it wasn't clear whether the cause was
  something in these changes or something during the merge window.

  This is a set of merge window fixes with some documentation additions"

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: avoid unwanted GCC memset()/memcpy() optimisations for IO variants
  ARM: pgtable: document mapping types
  ARM: io: convert ioremap*() to functions
  ARM: io: fix ioremap_wt() implementation
  ARM: io: document ARM specific behaviour of ioremap*() implementations
  ARM: fix lockdep unannotated irqs-off warning
  ARM: 8397/1: fix vdsomunge not to depend on glibc specific error.h
  ARM: add helpful message when truncating physical memory
  ARM: add help text for HIGHPTE configuration entry
  ARM: fix DEBUG_SET_MODULE_RONX build dependencies
  ARM: 8396/1: use phys_addr_t in pfn_to_kaddr()
  ARM: 8394/1: update memblock limit after mapping lowmem
  ARM: 8393/1: smp: Fix suspicious RCU usage with ipi tracepoints

In function mei_nfc_host_exit mei_cl_remove_device cannot be called
under the device mutex as device removing flow invokes the device driver
remove handler that calls in turn to mei_cl_disable_device which
naturally acquires the device mutex.

Also remove mei_cl_bus_remove_devices which has the same issue, but is
never executed as currently the only device on the mei client bus is NFC
and a new device cannot be easily added till the bus revamp is
completed.

This fixes regression caused by commit be9b720a ("mei_phy: move all
nfc logic from mei driver to nfc")

Prior to this change the nfc driver remove handler called to no-op
disable function while actual nfc device was disabled directly from the
mei driver.
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* acpi-scan:
  ata: ahci_platform: Add ACPI _CLS matching
  ACPI / scan: Add support for ACPI _CLS device matching

* acpi-pnp:
  ACPI / PNP: Reserve ACPI resources at the fs_initcall_sync stage

* acpi-soc:
  ACPI / LPSS: Fix up acpi_lpss_create_device()

* pm-domains:
  PM / Domains: Avoid infinite loops in attach/detach code

* pm-sleep:
  PM / hibernate: clarify resume documentation

* pm-wakeirq:
  PM / wakeirq: Avoid setting power.wakeirq too hastily

Move EDAC_SUPPORT to the right place.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

For those parts of the arm64 ACPI code that need to check GICC subtables
in the MADT, use the new BAD_MADT_GICC_ENTRY macro instead of the previous
BAD_MADT_ENTRY.  The new macro takes into account differences in the size
of the GICC subtable that the old macro did not; this caused failures even
though the subtable entries are valid.

Fixes: aeb823bb ("ACPICA: ACPI 6.0: Add changes for FADT table.")
Signed-off-by: NAl Stone <al.stone@linaro.org>
Reviewed-by: NHanjun Guo <hanjun.guo@linaro.org>
Acked-by: NWill Deacon <will.deacon@arm.com>
Acked-by: N"Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>