This patch adds hash of maps support (hashmap->bpf_map).
BPF_MAP_TYPE_HASH_OF_MAPS is added.

A map-in-map contains a pointer to another map and lets call
this pointer 'inner_map_ptr'.

Notes on deleting inner_map_ptr from a hash map:

1. For BPF_F_NO_PREALLOC map-in-map, when deleting
   an inner_map_ptr, the htab_elem itself will go through
   a rcu grace period and the inner_map_ptr resides
   in the htab_elem.

2. For pre-allocated htab_elem (!BPF_F_NO_PREALLOC),
   when deleting an inner_map_ptr, the htab_elem may
   get reused immediately.  This situation is similar
   to the existing prealloc-ated use cases.

   However, the bpf_map_fd_put_ptr() calls bpf_map_put() which calls
   inner_map->ops->map_free(inner_map) which will go
   through a rcu grace period (i.e. all bpf_map's map_free
   currently goes through a rcu grace period).  Hence,
   the inner_map_ptr is still safe for the rcu reader side.

This patch also includes BPF_MAP_TYPE_HASH_OF_MAPS to the
check_map_prealloc() in the verifier.  preallocation is a
must for BPF_PROG_TYPE_PERF_EVENT.  Hence, even we don't expect
heavy updates to map-in-map, enforcing BPF_F_NO_PREALLOC for map-in-map
is impossible without disallowing BPF_PROG_TYPE_PERF_EVENT from using
map-in-map first.
Signed-off-by: NMartin KaFai Lau <kafai@fb.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds a few helper funcs to enable map-in-map
support (i.e. outer_map->inner_map).  The first outer_map type
BPF_MAP_TYPE_ARRAY_OF_MAPS is also added in this patch.
The next patch will introduce a hash of maps type.

Any bpf map type can be acted as an inner_map.  The exception
is BPF_MAP_TYPE_PROG_ARRAY because the extra level of
indirection makes it harder to verify the owner_prog_type
and owner_jited.

Multi-level map-in-map is not supported (i.e. map->map is ok
but not map->map->map).

When adding an inner_map to an outer_map, it currently checks the
map_type, key_size, value_size, map_flags, max_entries and ops.
The verifier also uses those map's properties to do static analysis.
map_flags is needed because we need to ensure BPF_PROG_TYPE_PERF_EVENT
is using a preallocated hashtab for the inner_hash also.  ops and
max_entries are needed to generate inlined map-lookup instructions.
For simplicity reason, a simple '==' test is used for both map_flags
and max_entries.  The equality of ops is implied by the equality of
map_type.

During outer_map creation time, an inner_map_fd is needed to create an
outer_map.  However, the inner_map_fd's life time does not depend on the
outer_map.  The inner_map_fd is merely used to initialize
the inner_map_meta of the outer_map.

Also, for the outer_map:

* It allows element update and delete from syscall
* It allows element lookup from bpf_prog

The above is similar to the current fd_array pattern.
Signed-off-by: NMartin KaFai Lau <kafai@fb.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix in verifier:
For the same bpf_map_lookup_elem() instruction (i.e. "call 1"),
a broken case is "a different type of map could be used for the
same lookup instruction". For example, an array in one case and a
hashmap in another.  We have to resort to the old dynamic call behavior
in this case.  The fix is to check for collision on insn_aux->map_ptr.
If there is collision, don't inline the map lookup.

Please see the "do_reg_lookup()" in test_map_in_map_kern.c in the later
patch for how-to trigger the above case.

Simplifications on array_map_gen_lookup():
1. Calculate elem_size from map->value_size.  It removes the
   need for 'struct bpf_array' which makes the later map-in-map
   implementation easier.
2. Remove the 'elem_size == 1' test

Fixes: 81ed18ab ("bpf: add helper inlining infra and optimize map_array lookup")
Signed-off-by: NMartin KaFai Lau <kafai@fb.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Optimize:
bpf_call
  bpf_map_lookup_elem
    map->ops->map_lookup_elem
      htab_map_lookup_elem
        __htab_map_lookup_elem
into:
bpf_call
  __htab_map_lookup_elem

to improve performance of JITed programs.
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Optimize bpf_call -> bpf_map_lookup_elem() -> array_map_lookup_elem()
into a sequence of bpf instructions.
When JIT is on the sequence of bpf instructions is the sequence
of native cpu instructions with significantly faster performance
than indirect call and two function's prologue/epilogue.
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

convert_ctx_accesses() replaces single bpf instruction with a set of
instructions. Adjust corresponding insn_aux_data while patching.
It's needed to make sure subsequent 'for(all insn)' loops
have matching insn and insn_aux_data.
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

reduce indent and make it iterate over instructions similar to
convert_ctx_accesses(). Also convert hard BUG_ON into soft verifier error.
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

no functional change.
move fixup_bpf_calls() to verifier.c
it's being refactored in the next patch
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The purgatory code defines global variables which are referenced via a
symbol lookup in the kexec code (core and arch).

A recent commit addressing sparse warnings made these static and thereby
broke kexec_file.

Why did this happen? Simply because the whole machinery is undocumented and
lacks any form of forward declarations. The variable names are unspecific
and lack a prefix, so adding forward declarations creates shadow variables
in the core code. Aside of that the code relies on magic constants and
duplicate struct definitions with no way to ensure that these things stay
in sync. The section placement of the purgatory variables happened by
chance and not by design.

Unbreak kexec and cleanup the mess:

 - Add proper forward declarations and document the usage
 - Use common struct definition
 - Use the proper common defines instead of magic constants
 - Add a purgatory_ prefix to have a proper name space
 - Use ARRAY_SIZE() instead of a homebrewn reimplementation
 - Add proper sections to the purgatory variables [ From Mike ]

Fixes: 72042a8c ("x86/purgatory: Make functions and variables static")
Reported-by: NMike Galbraith <&lt;efault@gmx.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Nicholas Mc Guire <der.herr@hofr.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: "Tobin C. Harding" <me@tobin.cc>
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1703101315140.3681@nanosSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Patch series "userfaultfd non-cooperative further update for 4.11 merge
window".

Unfortunately I noticed one relevant bug in userfaultfd_exit while doing
more testing.  I've been doing testing before and this was also tested
by kbuild bot and exercised by the selftest, but this bug never
reproduced before.

I dropped userfaultfd_exit as result.  I dropped it because of
implementation difficulty in receiving signals in __mmput and because I
think -ENOSPC as result from the background UFFDIO_COPY should be enough
already.

Before I decided to remove userfaultfd_exit, I noticed userfaultfd_exit
wasn't exercised by the selftest and when I tried to exercise it, after
moving it to a more correct place in __mmput where it would make more
sense and where the vma list is stable, it resulted in the
event_wait_completion in D state.  So then I added the second patch to
be sure even if we call userfaultfd_event_wait_completion too late
during task exit(), we won't risk to generate tasks in D state.  The
same check exists in handle_userfault() for the same reason, except it
makes a difference there, while here is just a robustness check and it's
run under WARN_ON_ONCE.

While looking at the userfaultfd_event_wait_completion() function I
looked back at its callers too while at it and I think it's not ok to
stop executing dup_fctx on the fcs list because we relay on
userfaultfd_event_wait_completion to execute
userfaultfd_ctx_put(fctx->orig) which is paired against
userfaultfd_ctx_get(fctx->orig) in dup_userfault just before
list_add(fcs).  This change only takes care of fctx->orig but this area
also needs further review looking for similar problems in fctx->new.

The only patch that is urgent is the first because it's an use after
free during a SMP race condition that affects all processes if
CONFIG_USERFAULTFD=y.  Very hard to reproduce though and probably
impossible without SLUB poisoning enabled.

This patch (of 3):

I once reproduced this oops with the userfaultfd selftest, it's not
easily reproducible and it requires SLUB poisoning to reproduce.

    general protection fault: 0000 [#1] SMP
    Modules linked in:
    CPU: 2 PID: 18421 Comm: userfaultfd Tainted: G               ------------ T 3.10.0+ #15
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.1-0-g8891697-prebuilt.qemu-project.org 04/01/2014
    task: ffff8801f83b9440 ti: ffff8801f833c000 task.ti: ffff8801f833c000
    RIP: 0010:[<ffffffff81451299>]  [<ffffffff81451299>] userfaultfd_exit+0x29/0xa0
    RSP: 0018:ffff8801f833fe80  EFLAGS: 00010202
    RAX: ffff8801f833ffd8 RBX: 6b6b6b6b6b6b6b6b RCX: ffff8801f83b9440
    RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8800baf18600
    RBP: ffff8801f833fee8 R08: 0000000000000000 R09: 0000000000000001
    R10: 0000000000000000 R11: ffffffff8127ceb3 R12: 0000000000000000
    R13: ffff8800baf186b0 R14: ffff8801f83b99f8 R15: 00007faed746c700
    FS:  0000000000000000(0000) GS:ffff88023fc80000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
    CR2: 00007faf0966f028 CR3: 0000000001bc6000 CR4: 00000000000006e0
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
    Call Trace:
      do_exit+0x297/0xd10
      SyS_exit+0x17/0x20
      tracesys+0xdd/0xe2
    Code: 00 00 66 66 66 66 90 55 48 89 e5 41 54 53 48 83 ec 58 48 8b 1f 48 85 db 75 11 eb 73 66 0f 1f 44 00 00 48 8b 5b 10 48 85 db 74 64 <4c> 8b a3 b8 00 00 00 4d 85 e4 74 eb 41 f6 84 24 2c 01 00 00 80
    RIP  [<ffffffff81451299>] userfaultfd_exit+0x29/0xa0
     RSP <ffff8801f833fe80>
    ---[ end trace 9fecd6dcb442846a ]---

In the debugger I located the "mm" pointer in the stack and walking
mm->mmap->vm_next through the end shows the vma->vm_next list is fully
consistent and it is null terminated list as expected.  So this has to
be an SMP race condition where userfaultfd_exit was running while the
vma list was being modified by another CPU.

When userfaultfd_exit() run one of the ->vm_next pointers pointed to
SLAB_POISON (RBX is the vma pointer and is 0x6b6b..).

The reason is that it's not running in __mmput but while there are still
other threads running and it's not holding the mmap_sem (it can't as it
has to wait the even to be received by the manager).  So this is an use
after free that was happening for all processes.

One more implementation problem aside from the race condition:
userfaultfd_exit has really to check a flag in mm->flags before walking
the vma or it's going to slowdown the exit() path for regular tasks.

One more implementation problem: at that point signals can't be
delivered so it would also create a task in D state if the manager
doesn't read the event.

The major design issue: it overall looks superfluous as the manager can
check for -ENOSPC in the background transfer:

	if (mmget_not_zero(ctx->mm)) {
[..]
	} else {
		return -ENOSPC;
	}

It's safer to roll it back and re-introduce it later if at all.

[rppt@linux.vnet.ibm.com: documentation fixup after removal of UFFD_EVENT_EXIT]
  Link: http://lkml.kernel.org/r/1488345437-4364-1-git-send-email-rppt@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/20170224181957.19736-2-aarcange@redhat.comSigned-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NMike Rapoport <rppt@linux.vnet.ibm.com>
Acked-by: NMike Rapoport <rppt@linux.vnet.ibm.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix typos and add the following to the scripts/spelling.txt:

  overide||override

While we are here, fix the doubled "address" in the touched line
Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt.

Also, fix the comment block style in the touched hunks in
drivers/media/dvb-frontends/drx39xyj/drx_driver.h.

Link: http://lkml.kernel.org/r/1481573103-11329-21-git-send-email-yamada.masahiro@socionext.comSigned-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix typos and add the following to the scripts/spelling.txt:

  disble||disable
  disbled||disabled

I kept the TSL2563_INT_DISBLED in /drivers/iio/light/tsl2563.c
untouched.  The macro is not referenced at all, but this commit is
touching only comment blocks just in case.

Link: http://lkml.kernel.org/r/1481573103-11329-20-git-send-email-yamada.masahiro@socionext.comSigned-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

when all map elements are pre-allocated one cpu can delete and reuse htab_elem
while another cpu is still walking the hlist. In such case the lookup may
miss the element. Convert hlist to hlist_nulls to avoid such scenario.
When bucket lock is taken there is no need to take such precautions,
so only convert map_lookup and map_get_next to nulls.
The race window is extremely small and only reproducible with explicit
udelay() inside lookup_nulls_elem_raw()

Similar to hlist add hlist_nulls_for_each_entry_safe() and
hlist_nulls_entry_safe() helpers.

Fixes: 6c905981 ("bpf: pre-allocate hash map elements")
Reported-by: NJonathan Perry <jonperry@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

when htab_elem is removed from the bucket list the htab_elem.hash_node.next
field should not be overridden too early otherwise we have a tiny race window
between lookup and delete.
The bug was discovered by manual code analysis and reproducible
only with explicit udelay() in lookup_elem_raw().

Fixes: 6c905981 ("bpf: pre-allocate hash map elements")
Reported-by: NJonathan Perry <jonperry@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The scheduler header file split and cleanups ended up exposing a few
nasty header file dependencies, and in particular it showed how we in
<linux/wait.h> ended up depending on "signal_pending()", which now comes
from <linux/sched/signal.h>.

That's a very subtle and annoying dependency, which already caused a
semantic merge conflict (see commit e58bc927 "Pull overlayfs updates
from Miklos Szeredi", which added that fixup in the merge commit).

It turns out that we can avoid this dependency _and_ improve code
generation by moving the guts of the fairly nasty helper #define
__wait_event_interruptible_locked() to out-of-line code.  The code that
includes the signal_pending() check is all in the slow-path where we
actually go to sleep waiting for the event anyway, so using a helper
function is the right thing to do.

Using a helper function is also what we already did for the non-locked
versions, see the "__wait_event*()" macros and the "prepare_to_wait*()"
set of helper functions.

We might want to try to unify all these macro games, we have a _lot_ of
subtly different wait-event loops.  But this is the minimal patch to fix
the annoying header dependency.
Acked-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

commit 93825f2e converted NSEC_PER_SEC to TICK_NSEC because the author
confused NSEC_PER_JIFFY with NSEC_PER_SEC.

As a result, the calculation of refined jiffies got broken, triggering
lockups.

Fixes: 93825f2e ("jiffies: Reuse TICK_NSEC instead of NSEC_PER_JIFFY")
Reported-and-tested-by: NMeelis Roos <mroos@linux.ee>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1488880534-3777-1-git-send-email-fweisbec@gmail.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Always increment/decrement ucount->count under the ucounts_lock.  The
increments are there already and moving the decrements there means the
locking logic of the code is simpler.  This simplification in the
locking logic fixes a race between put_ucounts and get_ucounts that
could result in a use-after-free because the count could go zero then
be found by get_ucounts and then be freed by put_ucounts.

A bug presumably this one was found by a combination of syzkaller and
KASAN.  JongWhan Kim reported the syzkaller failure and Dmitry Vyukov
spotted the race in the code.

Cc: stable@vger.kernel.org
Fixes: f6b2db1a ("userns: Make the count of user namespaces per user")
Reported-by: NJongHwan Kim <zzoru007@gmail.com>
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Reviewed-by: NAndrei Vagin <avagin@gmail.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

If queue_delayed_work() gets called with NULL @wq, the kernel will
oops asynchronuosly on timer expiration which isn't too helpful in
tracking down the offender.  This actually happened with smc.

__queue_delayed_work() already does several input sanity checks
synchronously.  Add NULL @wq check.
Reported-by: NDave Jones <davej@codemonkey.org.uk>
Link: http://lkml.kernel.org/r/20170227171439.jshx3qplflyrgcv7@codemonkey.org.ukSigned-off-by: NTejun Heo <tj@kernel.org>

As found in grsecurity, this avoids exposing a kernel pointer through
the cgroup debug entries.
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NTejun Heo <tj@kernel.org>

pids_can_fork() is special in that the css association is guaranteed
to be stable throughout the function and thus doesn't need RCU
protection around task_css access.  When determining the css to charge
the pid, task_css_check() is used to override the RCU sanity check.

While adding a warning message on fork rejection from pids limit,
135b8b37 ("cgroup: Add pids controller event when fork fails
because of pid limit") incorrectly added a task_css access which is
neither RCU protected or explicitly annotated.  This triggers the
following suspicious RCU usage warning when RCU debugging is enabled.

  cgroup: fork rejected by pids controller in

  ===============================
  [ ERR: suspicious RCU usage.  ]
  4.10.0-work+ #1 Not tainted
  -------------------------------
  ./include/linux/cgroup.h:435 suspicious rcu_dereference_check() usage!

  other info that might help us debug this:

  rcu_scheduler_active = 2, debug_locks = 0
  1 lock held by bash/1748:
   #0:  (&cgroup_threadgroup_rwsem){+++++.}, at: [<ffffffff81052c96>] _do_fork+0xe6/0x6e0

  stack backtrace:
  CPU: 3 PID: 1748 Comm: bash Not tainted 4.10.0-work+ #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-1.fc25 04/01/2014
  Call Trace:
   dump_stack+0x68/0x93
   lockdep_rcu_suspicious+0xd7/0x110
   pids_can_fork+0x1c7/0x1d0
   cgroup_can_fork+0x67/0xc0
   copy_process.part.58+0x1709/0x1e90
   _do_fork+0xe6/0x6e0
   SyS_clone+0x19/0x20
   do_syscall_64+0x5c/0x140
   entry_SYSCALL64_slow_path+0x25/0x25
  RIP: 0033:0x7f7853fab93a
  RSP: 002b:00007ffc12d05c90 EFLAGS: 00000246 ORIG_RAX: 0000000000000038
  RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f7853fab93a
  RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000001200011
  RBP: 00007ffc12d05cc0 R08: 0000000000000000 R09: 00007f78548db700
  R10: 00007f78548db9d0 R11: 0000000000000246 R12: 00000000000006d4
  R13: 0000000000000001 R14: 0000000000000000 R15: 000055e3ebe2c04d
  /asdf

There's no reason to dereference task_css again here when the
associated css is already available.  Fix it by replacing the
task_cgroup() call with css->cgroup.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NMike Galbraith <efault@gmx.de>
Fixes: 135b8b37 ("cgroup: Add pids controller event when fork fails because of pid limit")
Cc: Kenny Yu <kennyyu@fb.com>
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: NTejun Heo <tj@kernel.org>

map_get_next_key callback is mandatory. Supply dummy handler.

Fixes: b95a5c4d ("bpf: add a longest prefix match trie map implementation")
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

get_next_freq() uses sg_cpu only to get sg_policy, which the callers of
get_next_freq() already have. Pass sg_policy instead of sg_cpu to
get_next_freq(), to make it more efficient.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

cached_raw_freq applies to the entire cpufreq policy and not individual
CPUs. Apart from wasting per-cpu memory, it is actually wrong to keep it
in struct sugov_cpu as we may end up comparing next_freq with a stale
cached_raw_freq of a random CPU.

Move cached_raw_freq to struct sugov_policy.

Fixes: 5cbea469 (cpufreq: schedutil: map raw required frequency to driver frequency)
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Early trace callgraphs can be extremely large on systems with
several seconds of boot time. The max_depth parameter limits how
deep the graph trace goes and reduces the output size. This
parameter is the same as the max_graph_depth file in tracefs.

Link: http://lkml.kernel.org/r/1488499935-23216-1-git-send-email-todd.e.brandt@linux.intel.comSigned-off-by: NTodd Brandt <todd.e.brandt@linux.intel.com>
[ changed comments about debugfs to tracefs ]
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

On boot up, if the kernel command line sets a graph funtion with the kernel
command line options "ftrace_graph_filter" or "ftrace_graph_notrace" then it
updates the corresponding function graph hash, ftrace_graph_hash or
ftrace_graph_notrace_hash respectively. Unfortunately, at boot up, these
variables are pointers to the "EMPTY_HASH" which is a constant used as a
placeholder when a hash has no entities. The problem was that the comand
line version to set the hashes updated the actual EMPTY_HASH instead of
creating a new hash for the function graph. This broke the EMPTY_HASH
because not only did it modify a constant (not sure how that was allowed to
happen, except maybe because it was done at early boot, const variables were
still mutable), but it made the filters have functions listed in them when
they were actually empty.

The kernel command line function needs to allocate a new hash for the
function graph filters and assign the necessary variables to that new hash
instead.

Link: http://lkml.kernel.org/r/1488420091.7212.17.camel@linux.intel.com

Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: b9b0c831 ("ftrace: Convert graph filter to use hash tables")
Reported-by: NTodd Brandt <todd.e.brandt@linux.intel.com>
Tested-by: NTodd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

It's not used by any of the scheduler methods, but <linux/sched/task_stack.h>
needs it to pick up STACK_END_MAGIC.
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

This is a stray header that is not needed by anything in sched.h,
so remove it.

Update files that relied on the stray inclusion.

This reduces the size of the header dependency graph.
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

sched/headers: Move cputime functionality from <linux/sched.h> and <linux/cputime.h> into <linux/sched/cputime.h>

Move cputime related functionality out of <linux/sched.h>, as most code
that includes <linux/sched.h> does not use that functionality.

Move data types that are not included in task_struct directly to
the signal definitions, into <linux/sched/signal.h>.

Also merge the (small) existing <linux/cputime.h> header into <linux/sched/cputime.h>.
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

The task_lock()/task_unlock() APIs are not realated to core scheduling,
they are task lifetime APIs, i.e. they belong into <linux/sched/task.h>.

Move them.
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Move rcu_copy_process() into kernel/fork.c, which is the only
user of this inline function.

This simplifies <linux/sched/task.h> to the level that <linux/sched.h>
does not have to be included in it anymore - which change is done
in a subsequent patch.
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

sched/headers: Move task_struct::signal and task_struct::sighand types and accessors into <linux/sched/signal.h>

task_struct::signal and task_struct::sighand are pointers, which would normally make it
straightforward to not define those types in sched.h.

That is not so, because the types are accompanied by a myriad of APIs (macros and inline
functions) that dereference them.

Split the types and the APIs out of sched.h and move them into a new header, <linux/sched/signal.h>.

With this change sched.h does not know about 'struct signal' and 'struct sighand' anymore,
trying to put accessors into sched.h as a test fails the following way:

  ./include/linux/sched.h: In function ‘test_signal_types’:
  ./include/linux/sched.h:2461:18: error: dereferencing pointer to incomplete type ‘struct signal_struct’
                    ^

This reduces the size and complexity of sched.h significantly.

Update all headers and .c code that relied on getting the signal handling
functionality from <linux/sched.h> to include <linux/sched/signal.h>.

The list of affected files in the preparatory patch was partly generated by
grepping for the APIs, and partly by doing coverage build testing, both
all[yes|mod|def|no]config builds on 64-bit and 32-bit x86, and an array of
cross-architecture builds.

Nevertheless some (trivial) build breakage is still expected related to rare
Kconfig combinations and in-flight patches to various kernel code, but most
of it should be handled by this patch.
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Because there are only 12 bits in held_lock::references, so we only
support 4095 nested lock held in the same time, adjust the lock number
for ww_mutex stress test to kill one lockdep splat:

  [ ] [ BUG: bad unlock balance detected! ]
  [ ] kworker/u2:0/5 is trying to release lock (ww_class_mutex) at:
  [ ] ww_mutex_unlock()
  [ ] but there are no more locks to release!
  ...
Signed-off-by: NBoqun Feng <boqun.feng@gmail.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicolai Hähnle <Nicolai.Haehnle@amd.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170301150138.hdixnmafzfsox7nn@tardis.cn.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Boqun reported that hlock->references can overflow. Add a debug test
for that to generate a clear error when this happens.

Without this, lockdep is likely to report a mysterious failure on
unlock.
Reported-by: NBoqun Feng <boqun.feng@gmail.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicolai Hähnle <Nicolai.Haehnle@amd.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

When busy-spinning on a ww_mutex_trylock(), we depend upon the other
thread advancing and releasing the lock. This can not happen on a single
CPU unless we relinquish it:

  [ ] NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [kworker/0:1:18]
  ...
  [ ] Call Trace:
  [ ]  mutex_trylock()
  [ ]  test_mutex_work+0x31/0x56
  [ ]  process_one_work+0x1b4/0x2f9
  [ ]  worker_thread+0x1b0/0x27c
  [ ]  kthread+0xd1/0xd3
  [ ]  ret_from_fork+0x19/0x30
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: f2a5fec1 ("locking/ww_mutex: Begin kselftests for ww_mutex")
Link: http://lkml.kernel.org/r/20170228094011.2595-1-chris@chris-wilson.co.ukSigned-off-by: NIngo Molnar <mingo@kernel.org>

Pavan noticed that the following commit:

  49ee5768 ("sched/core: Optimize pick_next_task() for idle_sched_class")

... broke RT,DL balancing by robbing them of the opportinty to do new-'idle'
balancing when their last runnable task (on that runqueue) goes away.
Reported-by: NPavan Kondeti <pkondeti@codeaurora.org>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Fixes: 49ee5768 ("sched/core: Optimize pick_next_task() for idle_sched_class")
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Kitsunyan reported desktop latency issues on his Celeron 887 because
of commit:

  1b568f0a ("sched/core: Optimize SCHED_SMT")

... even though his CPU doesn't do SMT.

The effect of running the SMT code on a !SMT part is basically a more
aggressive select_idle_cpu(). Removing the avg condition fixed things
for him.

I also know FB likes this test gone, even though other workloads like
having it.

For now, take it out by default, until we get a better idea.
Reported-by: Nkitsunyan <kitsunyan@inbox.ru>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Chris Mason <clm@fb.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

sched/headers: Prepare to move the get_task_struct()/put_task_struct() and related APIs from <linux/sched.h> to <linux/sched/task.h>

But first update usage sites with the new header dependency.
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

But first introduce a trivial header and update usage sites.
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

sched/headers: Prepare to move exit_files() and exit_itimers() from <linux/sched.h> to <linux/sched/task.h>

But first update the usage site.
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

sched/headers, vfs/execve: Prepare to move the do_execve*() prototypes from <linux/sched.h> to <linux/binfmts.h>

But first update the usage sites with the new header dependency.
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>