- 11 6月, 2016 7 次提交
-
-
由 David Howells 提交于
Trim line-terminal whitespace in net/rxrpc/ Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
Add a possibility where the user can just specify the parent and all filters under that parent are then being purged. Currently, for example for scripting, one needs to specify pref/prio to have a well-defined number for 'tc filter del' command for addressing the previously created instance or additionally filter handle in case of priorities being the same. Improve usage by allowing the option for tc to specify the parent and removing the whole chain for that given parent. Example usage after patch, no tc changes required: # tc qdisc replace dev foo clsact # tc filter add dev foo egress bpf da obj ./bpf.o # tc filter add dev foo egress bpf da obj ./bpf.o # tc filter show dev foo egress filter protocol all pref 49151 bpf filter protocol all pref 49151 bpf handle 0x1 bpf.o:[classifier] direct-action filter protocol all pref 49152 bpf filter protocol all pref 49152 bpf handle 0x1 bpf.o:[classifier] direct-action # tc filter del dev foo egress # tc filter show dev foo egress # Previously, RTM_DELTFILTER requests with invalid prio of 0 were rejected, so only netlink requests with RTM_NEWTFILTER and NLM_F_CREATE flag were allowed where the kernel would auto-generate a pref/prio. We can piggyback on that and use prio of 0 as a wildcard for requests of RTM_DELTFILTER. For notifying tc netlink monitoring users (e.g. libnl uses this for caching), there are two options, that is, sending individual tfilter_notify() notifications for each tcf_proto, or sending a single one indicating wildcard removal. I tried both and there are pros and cons for each, eventually I decided for sending individual tfilter_notify(), so that user space can support this seamlessly and there won't be a mess of changing each and every application to make sure expectations from the kernel won't break when they don't understand single notification. Since linear chains don't really scale, I expect only a handful of classifiers to be attached at max for a given parent anyway. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Daniel Borkmann says: ==================== bpf: couple of fixes These are two fixes for BPF, one to introduce xmit recursion limiter for tc bpf programs and the other one to reject filters a bit earlier. For more details please see individual patches. I have no strong opinion to which tree they should go, they apply to both, but I think net-next seems okay to me. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
Add a bpf_check_basics_ok() and reject filters that are of invalid size much earlier, so we don't do any useless work such as invoking bpf_prog_alloc(). Currently, rejection happens in bpf_check_classic() only, but it's really unnecessarily late and they should be rejected at earliest point. While at it, also clean up one bpf_prog_size() to make it consistent with the remaining invocations. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
Respect the stack's xmit_recursion limit for calls into dev_queue_xmit(). Currently, they are not handeled by the limiter when attached to clsact's egress parent, for example, and a buggy program redirecting it to the same device again could run into stack overflow eventually. It would be good if we could notify an admin to give him a chance to react. We reuse xmit_recursion instead of having one private to eBPF, so that the stack's current recursion depth will be taken into account as well. Follow-up to commit 3896d655 ("bpf: introduce bpf_clone_redirect() helper") and 27b29f63 ("bpf: add bpf_redirect() helper"). Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 William Tu 提交于
The patch adds a new OVS action, OVS_ACTION_ATTR_TRUNC, in order to truncate packets. A 'max_len' is added for setting up the maximum packet size, and a 'cutlen' field is to record the number of bytes to trim the packet when the packet is outputting to a port, or when the packet is sent to userspace. Signed-off-by: NWilliam Tu <u9012063@gmail.com> Cc: Pravin Shelar <pshelar@nicira.com> Acked-by: NPravin B Shelar <pshelar@ovn.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 David S. Miller 提交于
Conflicts: net/sched/act_police.c net/sched/sch_drr.c net/sched/sch_hfsc.c net/sched/sch_prio.c net/sched/sch_red.c net/sched/sch_tbf.c In net-next the drop methods of the packet schedulers got removed, so the bug fixes to them in 'net' are irrelevant. A packet action unload crash fix conflicts with the addition of the new firstuse timestamp. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 6月, 2016 33 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) nfnetlink timestamp taken from wrong skb, fix from Florian Westphal. 2) Revert some msleep conversions in rtlwifi as these spots are in atomic context, from Larry Finger. 3) Validate that NFTA_SET_TABLE attribute is actually specified when we call nf_tables_getset(). From Phil Turnbull. 4) Don't do mdio_reset in stmmac driver with spinlock held as that can sleep, from Vincent Palatin. 5) sk_filter() does things other than run a BPF filter, so we should not elide it's call just because sk->sk_filter is NULL. Fix from Eric Dumazet. 6) Fix missing backlog updates in several packet schedulers, from Cong Wang. 7) bnx2x driver should allow VLAN add/remove while the interface is down, from Michal Schmidt. 8) Several RDS/TCP race fixes from Sowmini Varadhan. 9) fq_codel scheduler doesn't return correct queue length in dumps, from Eric Dumazet. 10) Fix TCP stats for tail loss probe and early retransmit in ipv6, from Yuchung Cheng. 11) Properly initialize udp_tunnel_socket_cfg in l2tp_tunnel_create(), from Guillaume Nault. 12) qfq scheduler leaks SKBs if a kzalloc fails, fix from Florian Westphal. 13) sock_fprog passed into PACKET_FANOUT_DATA needs compat handling, from Willem de Bruijn. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (85 commits) vmxnet3: segCnt can be 1 for LRO packets packet: compat support for sock_fprog stmmac: fix parameter to dwmac4_set_umac_addr() net/mlx5e: Fix blue flame quota logic net/mlx5e: Use ndo_stop explicitly at shutdown flow net/mlx5: E-Switch, always set mc_promisc for allmulti vports net/mlx5: E-Switch, Modify node guid on vf set MAC net/mlx5: E-Switch, Fix vport enable flow net/mlx5: E-Switch, Use the correct error check on returned pointers net/mlx5: E-Switch, Use the correct free() function net/mlx5: Fix E-Switch flow steering capabilities check net/mlx5: Fix flow steering NIC capabilities check net/mlx5: Fix root flow table update net/mlx5: Fix MLX5_CMD_OP_MAX to be defined correctly net/mlx5: Fix masking of reserved bits in XRCD number net/mlx5: Fix the size of modify QP mailbox mlxsw: spectrum: Don't sleep during ndo_get_phys_port_name() mlxsw: spectrum: Make split flow match firmware requirements wext: Fix 32 bit iwpriv compatibility issue with 64 bit Kernel cfg80211: remove get/set antenna and tx power warnings ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "We have only few, mainly HD-audio device-specific fixes. Realtek codec driver got a slightly more LOC, but they are all for the new codec chip, and won't affect others at all" * tag 'sound-4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Add PCI ID for Kabylake ALSA: hda/realtek: Add T560 docking unit fixup ALSA: hda - Fix headset mic detection problem for Dell machine ALSA: uapi: Add three missing header files to Kbuild file ALSA: hda/realtek - Add support for new codecs ALC700/ALC701/ALC703 ALSA: hda/realtek - ALC256 speaker noise issue
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "This weeks instalment of fixes: amdgpu: Lots of memory leak and firmware leak fixes nouveau: Collection of display fixes, KASAN fixes vc4: vblank/pageflipping fixes fsl-dcu: Regmap cache fix omap: Unused variable warning fix. Nothing too surprising so far" * tag 'drm-fixes-for-v4.7-rc3' of git://people.freedesktop.org/~airlied/linux: (46 commits) drm/amdgpu: fix warning with powerplay disabled. drm/amd/powerplay: delete useless code as pptable changed in vbios. drm/amd/powerplay: fix bug visit array out of bounds drm/amdgpu: fix smu ucode memleak (v2) drm/amdgpu: add release firmware for cgs drm/amdgpu: fix tonga smu_fini mem leak drm/amdgpu: fix fiji smu fini mem leak drm/amdgpu: fix cik sdma ucode memleak drm/amdgpu: fix sdma24 ucode mem leak drm/amdgpu: fix sdma3 ucode mem leak drm/amdgpu: fix uvd fini mem leak drm/amdgpu: fix gfx 7 ucode mem leak drm/amdgpu: fix gfx8 ucode mem leak drm/amdgpu: fix missing free wb for cond_exec drm/amdgpu: fix memleak in pptable_init drm/amdgpu: fix mem leak in atombios drm/amdgpu: fix mem leak in pplib/hwmgr drm/amdgpu: fix mem leak in smumgr drm/amdgpu: add pipeline sync while vmid switch in same ctx drm/amdgpu: vBIOS post only call when mem_size zero ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull ACPI fix from Rafael Wysocki: "A recently introduced boot regression related to the ACPI EC initialization is addressed by restoring the previous behavior (Lv Zheng)" * tag 'acpi-4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / EC: Fix a boot EC regresion by restoring boot EC support for the DSDT EC
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management fixes from Rafael Wysocki: "Stable-candidate fixes for the intel_pstate driver and the cpuidle core. Specifics: - Fix two intel_pstate initialization issues, one of which was introduced during the 4.4 cycle (Srinivas Pandruvada) - Fix kernel build with CONFIG_UBSAN set and CONFIG_CPU_IDLE unset (Catalin Marinas)" * tag 'pm-4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: Fix ->set_policy() interface for no_turbo cpufreq: intel_pstate: Fix code ordering in intel_pstate_set_policy() cpuidle: Do not access cpuidle_devices when !CONFIG_CPU_IDLE
-
由 Linus Torvalds 提交于
Merge misc fixes from Andrew Morton: "7 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm/fadvise.c: do not discard partial pages with POSIX_FADV_DONTNEED mm: introduce dedicated WQ_MEM_RECLAIM workqueue to do lru_add_drain_all kernel/relay.c: fix potential memory leak mm: thp: broken page count after commit aa88b68c revert "mm: memcontrol: fix possible css ref leak on oom" kasan: change memory hot-add error messages to info messages mm/hugetlb: fix huge page reserve accounting for private mappings
-
由 Shrikrishna Khare 提交于
The device emulation may send segCnt of 1 for LRO packets. Signed-off-by: NShrikrishna Khare <skhare@vmware.com> Signed-off-by: NJin Heo <heoj@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bhaktipriya Shridhar 提交于
alloc_workqueue replaces deprecated create_workqueue(). A dedicated workqueue has been used since the workqueue mlxsw_wq is used for FDB notif. processing with workitems that are involved in normal device operation && because it's a network device which can be depended upon during memory reclaim. Workitems &trans->timeout_dw and &mlxsw_sp->fdb_notify.dw, map to mlxsw_sp_fdb_notify_work (processes FDB notifications from the underlying device and resolves the netdev to which the entry points to and notifies the bridge using the switchdev notifier) and mlxsw_emad_trans_timeout_work (provides async EMAD register access) respectively. They require forward progress under memory pressure and hence, WQ_MEM_RECLAIM has been set. Since there are only a fixed number of work items, explicit concurrency limit is unnecessary here. Signed-off-by: NBhaktipriya Shridhar <bhaktipriya96@gmail.com> Tested-by: NIdo Schimmel <idosch@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bhaktipriya Shridhar 提交于
alloc_workqueue replaces deprecated create_workqueue(). A dedicated workqueue has been used since the workitem viz (&lio->txq_status_wq.wk.work which maps to octnet_poll_check_txq_status) is involved in a brief poll routine for checking transmit queue status and is an intergral part of normal device operation. WQ_MEM_RECLAIM has been set to guarantee forward progress under memory pressure, which is a requirement here. Since there are only a fixed number of work items, explicit concurrency limit is unnecessary. flush_workqueue is unnecessary since destroy_workqueue() itself calls drain_workqueue() which flushes repeatedly till the workqueue becomes empty. Signed-off-by: NBhaktipriya Shridhar <bhaktipriya96@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Willem de Bruijn 提交于
Socket option PACKET_FANOUT_DATA takes a struct sock_fprog as argument if PACKET_FANOUT has mode PACKET_FANOUT_CBPF. This structure contains a pointer into user memory. If userland is 32-bit and kernel is 64-bit the two disagree about the layout of struct sock_fprog. Add compat setsockopt support to convert a 32-bit compat_sock_fprog to a 64-bit sock_fprog. This is analogous to compat_sock_fprog support for SO_REUSEPORT added in commit 19575988 ("soreuseport: add compat case for setsockopt SO_ATTACH_REUSEPORT_CBPF"). Reported-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NWillem de Bruijn <willemb@google.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
mlx4 RSS is limited to spread incoming packets to a power of two number of queues. An uniformly distibuted traffic would be split on queues 0 to N-1, N being a power of two, each queue having a 1/N weight. If number of RX queues is not a power of two, upper RX queues do not receive traffic. ethtool -x is lying, because it pretends some queues have higher weight. Before patch: lpaa24:~# ethtool -L eth1 rx 24 lpaa24:~# ethtool -x eth1 RX flow hash indirection table for eth1 with 24 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 10 11 12 13 14 15 16: 0 1 2 3 4 5 6 7 RSS hash key: e0:7c:3a:89:07:55:b6:58:69:cc:f4:e5:24:62:e3:25:88:6c:42:5b:d2:cb:9a:d2:e0:06:e1:dc:f9:09:a1:89:0f:a0:30:43:73:6f:0c:b6 If this information was correct, user space tools could expect queues 0 to 7 to receive twice more traffic than queues 8 to 15 After patch : lpaa24:~# ethtool -L eth1 rx 24 lpaa24:~# ethtool -x eth1 RX flow hash indirection table for eth1 with 24 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 10 11 12 13 14 15 RSS hash key: da:7b:09:60:f1:ac:67:b4:d0:72:d4:ec:a2:e5:80:0a:ad:50:22:1a:f8:f9:66:54:5f:22:45:c3:88:f4:57:82:c1:c1:90:ed:70:cb:40:ce lpaa24:~# ethtool -X eth1 equal 8 lpaa24:~# ethtool -x eth1 RX flow hash indirection table for eth1 with 24 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 0 1 2 3 4 5 6 7 RSS hash key: da:7b:09:60:f1:ac:67:b4:d0:72:d4:ec:a2:e5:80:0a:ad:50:22:1a:f8:f9:66:54:5f:22:45:c3:88:f4:57:82:c1:c1:90:ed:70:cb:40:ce Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NMaciej Żenczykowski <maze@google.com> Cc: Eugenia Emantayev <eugenia@mellanox.com> Cc: Wei Wang <weiwan@google.com> Cc: Willem de Bruijn <willemb@google.com> Reviewed-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Dooks 提交于
The dwmac4_set_umac_addr() takes a struct mac_device_info as the first parameter, but is being passed a ioaddr instead from dwmac4_set_filter(). Fix the warning/bug by changing the first parameter. drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:159:46: warning: incorrect type in argument 1 (different address spaces) drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:159:46: expected struct mac_device_info *hw drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:159:46: got void [noderef] <asn:2>*ioaddr Note, only compile tested this as do not have any hardware with it in. Signed-off-by: NBen Dooks <ben.dooks@codethink.co.uk> Acked-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
Replace netdev_alloc_skb_ip_align() with napi_alloc_skb() which can save several CPU cycles by avoiding having to disable and re-enable IRQs. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Florian Fainelli says: ==================== net: bgmac: Misc improvements This patch series add minor changes to the bgmac driver: - properly bind net_device with its backing device structure such that we can locate the device using common helper functions - add support for ethtool statistics reading the HW MIB counters which is useful for debugging - add netdev statistics throughout the TX/RX path to know what is going on ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
Add a few netdev statistics to report transmitted and received bytes and packets and a few obvious errors. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
Read the statistics from the BGMAC's builtin MAC and return them to user-space using the standard ethtool helpers. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
In preparation for allowing different helpers to be utilized against network devices created by the bgmac driver, make sure that we bind the net_device with core->dev. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Aaron Conole 提交于
A draft version of the MTU Advice feature bit was specified as 25. This bit is not within the allowed range for network device feature bits, and should be changed to be feature bit 3 to fully comply with the spec. Fixes 14de9d11 ('virtio-net: Add initial MTU advice feature') Signed-off-by: NAaron Conole <aconole@redhat.com> Suggested-by: N"Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Frank Kellermann reported a kernel crash with 4.5.0 when IPv6 is disabled at boot using the kernel option ipv6.disable=1. Using current net-next with the boot option: $ ip link add red type vrf table 1001 Generates: [12210.919584] BUG: unable to handle kernel NULL pointer dereference at 0000000000000748 [12210.921341] IP: [<ffffffff814b30e3>] fib6_get_table+0x2c/0x5a [12210.922537] PGD b79e3067 PUD bb32b067 PMD 0 [12210.923479] Oops: 0000 [#1] SMP [12210.924001] Modules linked in: ipvlan 8021q garp mrp stp llc [12210.925130] CPU: 3 PID: 1177 Comm: ip Not tainted 4.7.0-rc1+ #235 [12210.926168] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [12210.928065] task: ffff8800b9ac4640 ti: ffff8800bacac000 task.ti: ffff8800bacac000 [12210.929328] RIP: 0010:[<ffffffff814b30e3>] [<ffffffff814b30e3>] fib6_get_table+0x2c/0x5a [12210.930697] RSP: 0018:ffff8800bacaf888 EFLAGS: 00010202 [12210.931563] RAX: 0000000000000748 RBX: ffffffff81a9e280 RCX: ffff8800b9ac4e28 [12210.932688] RDX: 00000000000000e9 RSI: 0000000000000002 RDI: 0000000000000286 [12210.933820] RBP: ffff8800bacaf898 R08: ffff8800b9ac4df0 R09: 000000000052001b [12210.934941] R10: 00000000657c0000 R11: 000000000000c649 R12: 00000000000003e9 [12210.936032] R13: 00000000000003e9 R14: ffff8800bace7800 R15: ffff8800bb3ec000 [12210.937103] FS: 00007faa1766c700(0000) GS:ffff88013ac00000(0000) knlGS:0000000000000000 [12210.938321] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [12210.939166] CR2: 0000000000000748 CR3: 00000000b79d6000 CR4: 00000000000406e0 [12210.940278] Stack: [12210.940603] ffff8800bb3ec000 ffffffff81a9e280 ffff8800bacaf8c8 ffffffff814b3135 [12210.941818] ffff8800bb3ec000 ffffffff81a9e280 ffffffff81a9e280 ffff8800bace7800 [12210.943040] ffff8800bacaf8f0 ffffffff81397c88 ffff8800bb3ec000 ffffffff81a9e280 [12210.944288] Call Trace: [12210.944688] [<ffffffff814b3135>] fib6_new_table+0x24/0x8a [12210.945516] [<ffffffff81397c88>] vrf_dev_init+0xd4/0x162 [12210.946328] [<ffffffff814091e1>] register_netdevice+0x100/0x396 [12210.947209] [<ffffffff8139823d>] vrf_newlink+0x40/0xb3 [12210.948001] [<ffffffff814187f0>] rtnl_newlink+0x5d3/0x6d5 ... The problem above is due to the fact that the fib hash table is not allocated when IPv6 is disabled at boot. As for the VRF driver it should not do any IPv6 initializations if IPv6 is disabled, so it needs to know if IPv6 is disabled at boot. The disable parameter is private to the IPv6 module, so provide an accessor for modules to determine if IPv6 was disabled at boot time. Fixes: 35402e31 ("net: Add IPv6 support to VRF device") Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Howells 提交于
Simplify the RxRPC connect() implementation. It will just note the destination address it is given, and if a sendmsg() comes along with no address, this will be assigned as the address. No transport struct will be held internally, which will allow us to remove this later. Simplify sendmsg() also. Whilst a call is active, userspace refers to it by a private unique user ID specified in a control message. When sendmsg() sees a user ID that doesn't map to an extant call, it creates a new call for that user ID and attempts to add it. If, when we try to add it, the user ID is now registered, we now reject the message with -EEXIST. We should never see this situation unless two threads are racing, trying to create a call with the same ID - which would be an error. It also isn't required to provide sendmsg() with an address - provided the control message data holds a user ID that maps to a currently active call. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabien Siron 提交于
Signed-off-by: NFabien Siron <fabien.siron@epita.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
I am not sure mlx4_en_netpoll() is doing anything useful right now. mlx4 has different NAPI structures for RX and TX, and netpoll only wants to drain TX queues. Lets schedule NAPI polls on TX, not RX. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Maciej Żenczykowski <maze@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Acked-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Florian Fainelli says: ==================== net: dsa: Broadcom BCM53xx switches support This patch series adds support for the Broadcom BCM53xx series aka RoboSwitches. This driver is largely based on Jonas Gorski's b53 driver for OpenWrt which can be found here: https://dev.openwrt.org/browser/trunk/target/linux/generic/files/drivers/net/phy/b53 a few bug fixes and DSA-ifycation later, here is what we got. This has been successfully tested in the following configurations: - Broadcom BCM53011 using the SRAB bus layer with 4 ports LAN, 1 port WAN - A Broadcom BCM7445 device with an internal Starfighter 2 switch (bcm_sf2.c) and a Broadcom BCM53125 hanging off one of its ports connected via MDIO, creating two trees hanging off each other, and this works! - A Broadcom BCM53125 MDIO connected to a Lamobo/Bananapi R1 board using the STMMAC MDIO driver For now, we do not enable Broadcom tags, because there are different generations of switches being supported which have different tag formats, but the plan is to enable them later on. Support for different HW features will be added later: EEE, Compact Field Processor (TCAM) once this initial cut gets accepted. Testing and bug reports welcome! ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
Add support for configuration VLANs on B53 devices by implementing the port VLAN add/del/dump functions. We currently default to a behavior which is equivalent to having VLAN filtering turned on, where all VLANs not programmed into the VLAN port-based vector will be discarded on ingress. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
Add support for HW bridging by tying the ports together in the same port VLAN mask when they belong to the same bridge, and isolating them to be alone with the CPU port when they are not. Propagate STP states from the bridge layer to the switch's HW mapping when requested. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
Adds support for FDB add/delete/dump using the ARL read/write logic and the ARL search logic for faster dumps. The code is made flexible enough it could support devices with a different register layout like BCM5325 and BCM5365 which have fewer number of entries or pack values into a single 64 bits register. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
The Broadcom BCM7445 STB chip has an issued in its revision D0 which was previously worked around in drivers/net/dsa/bcm_sf2.c where we may end-up double programming the integrated BCM7445 switch (bcm_sf2) and an external Broadcom switch such as BCM53125, since these are mostly register compatible. Add a small quirk which just defers probing until we are sitting on the slave DSA MDIO bus, which will allow us to intercept reads/writes and funnel them through the SF2 internal MDIO master (which happens to disconnect its pseudo PHY). Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
This patch adds support for Broadcom's BCM53xx switch family, also known as RoboSwitch. Some of these switches are ubiquituous, found in home routers, Wi-Fi routers, DSL and cable modem gateways and other networking related products. This drivers adds the library driver (b53_common.c) as well as a few bus glue drivers for MDIO, SPI, Switch Register Access Block (SRAB) and memory-mapped I/O into a SoC's address space (Broadcom BCM63xx/33xx). Basic operations are supported to bring the Layer 1/2 up and running, but not much more at this point, subsequent patches add the remaining features. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Florian Fainelli says: ==================== net: dsa: bcm_sf2: add VLAN support This is long overdue, finally add support for VLANs in the Broadcom Starfigther 2 switch driver. There are a few things that make us differ from e.g; mv88e6xxx.c: - we keep a software cache of which VLANs are enabled and which are not to dramatically speed up the VLAN dump operation, we do not have any HW operation which would only return the list of valid VLAN entries, they would have to be all queried one by one, with 4K vlans, this takes a while - the default behavior is equivalent to setting VLAN filtering to 1, still working on implementing a proper port_vlan_filtering callback, but I figured the most conservative behavior is probably okay anyway - without enabling VLANs, the default behavior is to receive any 802.1q frames (per the DSA documentation), however, once we start enabling VLAN support, if an interface leaves the bridge, we still want it to receive all 802.1q frames so we utiliez the "Join all VLAN" feature of the switch to perform that ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
Add support for configuring VLANs on the Broadcom Starfigther2 switch. This is all done through the bridge vlan facility just like other DSA drivers. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
Add the definitions for the VLAN registers that we are going to manipulate in subsequent patches. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
Re-order the bcm_sf2_sw_setup() function so that it is at the far end of the driver to avoid any kind of forward declarations. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
Add a helper function to fast age something that is controlled by the caller: port, VLAN. We will use this to implement a VLAN fast age operation. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-