- 10 1月, 2006 40 次提交
-
-
由 Andrew Morton 提交于
- Replace del_timer with del_timer_sync Signed-off-by: NRicardo Cerqueira <v4l@cerqueira.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Christopher Pascoe 提交于
- Fixes sub-device release for BTTV. Without this, DVB modules can't be reloaded Signed-off-by: NRicardo Cerqueira <v4l@cerqueira.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Hans Verkuil 提交于
- Fix 64-bit compile warnings Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Michael H. Schimek 提交于
- V4L2_(G|S|TRY)_FMT returned incorrect VBI start lines for PAL-M, NTSC-JP, and PAL-60. They also returned an inaccurate VBI offset. - V4L2_(G|S)_FMT and V4L2_TRY_FMT disagreed about the start of VBI capturing in PAL and SECAM second field. Note the start line fixes may break applications using VIDIOCSVBIFMT because this ioctl fails when the driver does not support exactly the requested parameters. - V4L2_TRY_FMT did not clear the reserved field in struct v4l2_vbi_format. - V4L2_(S|TRY)_FMT did not expect very large or small VBI start or count values, returning wrong (but safe) counts due to an overflow. - VIDIOCGVBIFMT confused V4L and V4L2 VBI flags. However this had no effect because the flags have the same value and bttv never sets them. - In v4l_compat_translate_ioctl() the VIDIOC(G|S)VBIFMT code did not expect V4L2 drivers supporting VBI formats besides V4L2_PIX_FMT_GREY. Signed-off-by: NMichael H. Schimek <mschimek@gmx.at> Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Mauro Carvalho Chehab 提交于
- Debug message changed to be coherent with other modules - added ntsc parameter - parameters moved to the beginning at the file - tuner_status moved to a better position. Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Mauro Carvalho Chehab 提交于
- Now, default control values at cx88_cx8800_ctls are honored - default value for contrast/saturation were changed to be in line with available documentation for the chipset; - Removed some bad coding at set_control; - U/V Saturation now changes proportionally Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Michael Krufky 提交于
- "Philips 1236D ATSC/NTSC dual in" - fix typo. Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Ricardo Cerqueira 提交于
- Merged ir-kbd-gpio into bttv as bttv-input, for consistency with other input modules Signed-off-by: NRicardo Cerqueira <v4l@cerqueira.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Steven Toth 提交于
Updates to the tveeprom eeprom checking Signed-of-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Mauro Carvalho Chehab 提交于
- Replaces MAX()/MIN() by kernel.h max()/min() macros Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Alex Woods 提交于
- Collection of patches from Peter Beutner addressing: - add symbolrates to the DVB-S frontend description - fix capability flags in DVB-S frontend describtion - remove some void casts - disable zig-zag scanning as it makes no sense for DVB-T - set sensible min_delay value - return an error for requested filter types the driver can't handle Signed-off-by: NPeter Beutner <p.beutner@gmx.net> Signed-off-by: NAlex Woods <linux-dvb@giblets.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Deti Fliegl 提交于
- USB hot unplug Oops fix. Signed-off-by: NDeti Fliegl <deti@fliegl.de> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Jesper Juhl 提交于
- Here's a small patch to decrease the number of pointer derefs in drivers/media/dvb/b2c2/flexcop-fe-tuner.c Benefits of the patch: - Fewer pointer dereferences should make the code slightly faster. - Size of generated code is smaller - Improved readability Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com> Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Mauro Carvalho Chehab 提交于
- digitv_ctrl_msg() if (wo) test is reversed. fixed. - usb timeout is in Hz, not in jiffies. - NULL replaced by 0 to be coherent. - removed uneeded headers. Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Steven Toth 提交于
- Cleanup timeout handling in cx24123_pll_writereg(), and use a reasonable value for the timeout. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Stephen Williams 提交于
- Make FE_READ_UNCORRECTED_BLOCKS reset the count after each call, thus returning a momentary value like all other demods do, instead of an absolute, ever increasing count. Signed-off-by: NStephen Williams <stephen.williams@gmail.com> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Mauro Carvalho Chehab 提交于
- This patch makes kernel in sync with v4l subsystem tree. - some lines reordered to be sync. - some reduntant codes removed. Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Mauro Carvalho Chehab 提交于
- some uneeded #if were introduced by a previous patch. this patch removes these. Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Mauro Carvalho Chehab 提交于
- include reorder to be in sync with V4L tree Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 George Gazurkoff 提交于
- Enable remote control on AVERTV STUDIO 303 - This patch adapted from a patch found on a website posted by an anonymous user. Thanks to original anonymous author for creating this patch. Tested successfully by George Gazurkoff. Signed-off-by: NGeorge Gazurkoff <gazurkoff@gmail.com> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Hans Verkuil 提交于
- Fix incorrect matching of TV standards leading to incorrect IFPCoff values. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Hans Verkuil 提交于
- Set the tuner takeover point to 0x10 for NTSC/radio and 0x14 for PAL/SECAM. - Allow override through TDA9887_SET_CONFIG - PAL-N belongs with PAL-BG as does PAL-H. PAL-Nc belongs to PAL-M - Add SECAM-BGH - Set video freq to cVideoIF_38_90 for DK standards. - Add cTunerGainLow to radio, change deemphasis to 75 for mono. - Add ntsc module param for 'M' and 'J' (Japanese) standards. - Fix module handling for 2.4. - Now able to select all standards through pal/secam/ntsc module options Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Hans Verkuil 提交于
- Add missing VIDEO_ADV_DEBUG config option. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Steven Toth 提交于
- This patch adds eeprom awareness for the Roslyn. In effect, the blackbird will query the tuner V4L2_STD_xxxx definitions to determine whether it's connected to a NTSC or PAL tuner. Based on that, various default values will change for blackbird encoding. - Fixes back panel SVIDEO/COMPOSITE with audio, work properly. - Fixes a problem with lip sync issues, due to bad framerate vs audio rate assumptions. - Fixed a problem with the GPIO configuration in cx88-cards. - Removed the comments in cx88-cards that made no sense. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Otavio Salvador 提交于
This patch replace all calls to pci_module_init, that's deprecated and will be removed in future, with pci_register_driver that should be the used function now. Signed-off-by: NOtavio Salvador <otavio@debian.org> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Steven Toth 提交于
- Cleaned up the structure to use the V4L2_STD_xxx definitions rather than a one off set of hardcoded values - which could change in the future. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Hans Verkuil 提交于
- Remove AUDC_CONFIG_PINNACLE horror. This also fixes radio support for mt20xx tuners. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Mauro Carvalho Chehab 提交于
- Removes obsoleted stuff - Reorders some stuff to make it clearer to read - Clears some debug messages Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Hans Verkuil 提交于
- Mark tda9887.c status log values as hexadecimal (add 0x prefix). Add VIDIOC_LOG_STATUS support to tuner-core.c. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Hans Verkuil 提交于
- Fix compile error (missing '}') in em28xx-video.c. Remove dead code and volume scaling from msp3400.c. Volume scaling does not belong there, it should be done in the driver for the card that uses the msp3400 if needed, not in the msp3400.c source. The volume scaling code gave problems with the ivtv driver which does not need to do any scaling. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Mauro Carvalho Chehab 提交于
- Controls now come from video and audio decoder driver for msp3400 and tvp5150. - Added audio and sound controls as provided by msp3400 and tvp5150. Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Steven Toth 提交于
- Add support for another Nova-T-PCI PCI subdevice 0x9001 Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Michael Krufky 提交于
- Cleanup check for dvb. Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Steven Toth 提交于
- Add support for the Hauppauge HVR1100 and HVR1100-LP products. - Add i2c_gate_ctrl callback function to dvb_frontend_ops struct. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Michael Krufky 提交于
- vfree(NULL) is legal. Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Mauro Carvalho Chehab 提交于
- Added a new debug msg to help identifying tuner Problems Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Mauro Carvalho Chehab 提交于
- added offset parameter for adjusting tuner offset by hand Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Hans Verkuil 提交于
- Fix gcc-4.0.2 compile error in msp3400.c. - msp_attach moved to reduce a prototype. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Hans Verkuil 提交于
- Change function order to reduce usage of function prototypes. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Hans Verkuil 提交于
- Fix wrong tuner.h define for tuner 46 (it's a Panasonic, not a Microtune). Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-