Make AF_RXRPC accept MSG_WAITALL as a flag to sendmsg() to tell it to
ignore signals whilst loading up the message queue, provided progress is
being made in emptying the queue at the other side.

Progress is defined as the base of the transmit window having being
advanced within 2 RTT periods.  If the period is exceeded with no progress,
sendmsg() will return anyway, indicating how much data has been copied, if
any.

Once the supplied buffer is entirely decanted, the sendmsg() will return.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Provide a couple of functions to allow cleaner handling of signals in a
kernel service.  They are:

 (1) rxrpc_kernel_get_rtt()

     This allows the kernel service to find out the RTT time for a call, so
     as to better judge how large a timeout to employ.

     Note, though, that whilst this returns a value in nanoseconds, the
     timeouts can only actually be in jiffies.

 (2) rxrpc_kernel_check_life()

     This returns a number that is updated when ACKs are received from the
     peer (notably including PING RESPONSE ACKs which we can elicit by
     sending PING ACKs to see if the call still exists on the server).

     The caller should compare the numbers of two calls to see if the call
     is still alive.

These can be used to provide an extending timeout rather than returning
immediately in the case that a signal occurs that would otherwise abort an
RPC operation.  The timeout would be extended if the server is still
responsive and the call is still apparently alive on the server.

For most operations this isn't that necessary - but for FS.StoreData it is:
OpenAFS writes the data to storage as it comes in without making a backup,
so if we immediately abort it when partially complete on a CTRL+C, say, we
have no idea of the state of the file after the abort.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Provide support for a kernel service to make use of the service upgrade
facility.  This involves:

 (1) Pass an upgrade request flag to rxrpc_kernel_begin_call().

 (2) Make rxrpc_kernel_recv_data() return the call's current service ID so
     that the caller can detect service upgrade and see what the service
     was upgraded to.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

When an RxRPC service packet comes in, the target connection is looked up
by an rb-tree search under RCU and a read-locked seqlock; the seqlock retry
check is, however, currently skipped if we got a match, but probably
shouldn't be in case the connection we found gets replaced whilst we're
doing a search.

Make the lookup procedure always go through need_seqretry(), even if the
lookup was successful.  This makes sure we always pick up on a write-lock
event.

On the other hand, since we don't take a ref on the object, but rely on RCU
to prevent its destruction after dropping the seqlock, I'm not sure this is
necessary.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Allow a client call that failed on network error to be retried, provided
that the Tx queue still holds DATA packet 1.  This allows an operation to
be submitted to another server or another address for the same server
without having to repackage and re-encrypt the data so far processed.

Two new functions are provided:

 (1) rxrpc_kernel_check_call() - This is used to find out the completion
     state of a call to guess whether it can be retried and whether it
     should be retried.

 (2) rxrpc_kernel_retry_call() - Disconnect the call from its current
     connection, reset the state and submit it as a new client call to a
     new address.  The new address need not match the previous address.

A call may be retried even if all the data hasn't been loaded into it yet;
a partially constructed will be retained at the same point it was at when
an error condition was detected.  msg_data_left() can be used to find out
how much data was packaged before the error occurred.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Add a callback to rxrpc_kernel_send_data() so that a kernel service can get
a notification that the AF_RXRPC call has transitioned out the Tx phase and
is now waiting for a reply or a final ACK.

This is called from AF_RXRPC with the call state lock held so the
notification is guaranteed to come before any reply is passed back.

Further, modify the AFS filesystem to make use of this so that we don't have
to change the afs_call state before sending the last bit of data.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Remove indentation from some blank lines.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

call->error is stored as 0 or a negative error code.  Don't negate this
value (ie. make it positive) before returning it from a kernel function
(though it should still be negated before passing to userspace through a
control message).
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Fix IPv6 support in AF_RXRPC in the following ways:

 (1) When extracting the address from a received IPv4 packet, if the local
     transport socket is open for IPv6 then fill out the sockaddr_rxrpc
     struct for an IPv4-mapped-to-IPv6 AF_INET6 transport address instead
     of an AF_INET one.

 (2) When sending CHALLENGE or RESPONSE packets, the transport length needs
     to be set from the sockaddr_rxrpc::transport_len field rather than
     sizeof() on the IPv4 transport address.

 (3) When processing an IPv4 ICMP packet received by an IPv6 socket, set up
     the address correctly before searching for the affected peer.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

When an XDR-encoded Kerberos 5 ticket is added as an rxrpc-type key, the
expiry time should be drawn from the k5 part of the token union (which was
what was filled in), rather than the kad part of the union.
Reported-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Since the 'expiry' variable of 'struct key_preparsed_payload' has been
changed to 'time64_t' type, which is year 2038 safe on 32bits system.

In net/rxrpc subsystem, we need convert 'u32' type to 'time64_t' type
when copying ticket expires time to 'prep->expiry', then this patch
introduces two helper functions to help convert 'u32' to 'time64_t'
type.

This patch also uses ktime_get_real_seconds() to get current time instead
of get_seconds() which is not year 2038 safe on 32bits system.
Signed-off-by: NBaolin Wang <baolin.wang@linaro.org>
Signed-off-by: NDavid Howells <dhowells@redhat.com>

rxrpc_service_prealloc_one() doesn't set the socket pointer on any new call
it preallocates, but does add it to the rxrpc net namespace call list.
This, however, causes rxrpc_put_call() to oops when the call is discarded
when the socket is closed.  rxrpc_put_call() needs the socket to be able to
reach the namespace so that it can use a lock held therein.

Fix this by setting a call's socket pointer immediately before discarding
it.

This can be triggered by unloading the kafs module, resulting in an oops
like the following:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000030
IP: rxrpc_put_call+0x1e2/0x32d
PGD 0
P4D 0
Oops: 0000 [#1] SMP
Modules linked in: kafs(E-)
CPU: 3 PID: 3037 Comm: rmmod Tainted: G            E   4.12.0-fscache+ #213
Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
task: ffff8803fc92e2c0 task.stack: ffff8803fef74000
RIP: 0010:rxrpc_put_call+0x1e2/0x32d
RSP: 0018:ffff8803fef77e08 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff8803fab99ac0 RCX: 000000000000000f
RDX: ffffffff81c50a40 RSI: 000000000000000c RDI: ffff8803fc92ea88
RBP: ffff8803fef77e30 R08: ffff8803fc87b941 R09: ffffffff82946d20
R10: ffff8803fef77d10 R11: 00000000000076fc R12: 0000000000000005
R13: ffff8803fab99c20 R14: 0000000000000001 R15: ffffffff816c6aee
FS:  00007f915a059700(0000) GS:ffff88041fb80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000030 CR3: 00000003fef39000 CR4: 00000000001406e0
Call Trace:
 rxrpc_discard_prealloc+0x325/0x341
 rxrpc_listen+0xf9/0x146
 kernel_listen+0xb/0xd
 afs_close_socket+0x3e/0x173 [kafs]
 afs_exit+0x1f/0x57 [kafs]
 SyS_delete_module+0x10f/0x19a
 do_syscall_64+0x8a/0x149
 entry_SYSCALL64_slow_path+0x25/0x25

Fixes: 2baec2c3 ("rxrpc: Support network namespacing")
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move the protocol description header file into net/rxrpc/ and rename it to
protocol.h.  It's no longer necessary to expose it as packets are no longer
exposed to kernel services (such as AFS) that use the facility.

The abort codes are transferred to the UAPI header instead as we pass these
back to userspace and also to kernel services.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

This patch uses refcount_inc_not_zero() instead of
atomic_inc_not_zero_hint() due to absense of a _hint()
version of refcount API. If the hint() version must
be used, we might need to revisit API.
Signed-off-by: NElena Reshetova <elena.reshetova@intel.com>
Signed-off-by: NHans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NDavid Windsor <dwindsor@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: NElena Reshetova <elena.reshetova@intel.com>
Signed-off-by: NHans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NDavid Windsor <dwindsor@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: NElena Reshetova <elena.reshetova@intel.com>
Signed-off-by: NHans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NDavid Windsor <dwindsor@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There were many places that my previous spatch didn't find,
as pointed out by yuan linyu in various patches.

The following spatch found many more and also removes the
now unnecessary casts:

    @@
    identifier p, p2;
    expression len;
    expression skb;
    type t, t2;
    @@
    (
    -p = skb_put(skb, len);
    +p = skb_put_zero(skb, len);
    |
    -p = (t)skb_put(skb, len);
    +p = skb_put_zero(skb, len);
    )
    ... when != p
    (
    p2 = (t2)p;
    -memset(p2, 0, len);
    |
    -memset(p, 0, len);
    )

    @@
    type t, t2;
    identifier p, p2;
    expression skb;
    @@
    t *p;
    ...
    (
    -p = skb_put(skb, sizeof(t));
    +p = skb_put_zero(skb, sizeof(t));
    |
    -p = (t *)skb_put(skb, sizeof(t));
    +p = skb_put_zero(skb, sizeof(t));
    )
    ... when != p
    (
    p2 = (t2)p;
    -memset(p2, 0, sizeof(*p));
    |
    -memset(p, 0, sizeof(*p));
    )

    @@
    expression skb, len;
    @@
    -memset(skb_put(skb, len), 0, len);
    +skb_put_zero(skb, len);

Apply it to the tree (with one manual fixup to keep the
comment in vxlan.c, which spatch removed.)
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This fixes CVE-2017-7482.

When a kerberos 5 ticket is being decoded so that it can be loaded into an
rxrpc-type key, there are several places in which the length of a
variable-length field is checked to make sure that it's not going to
overrun the available data - but the data is padded to the nearest
four-byte boundary and the code doesn't check for this extra.  This could
lead to the size-remaining variable wrapping and the data pointer going
over the end of the buffer.

Fix this by making the various variable-length data checks use the padded
length.
Reported-by: N石磊 <shilei-c@360.cn>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Reviewed-by: NMarc Dionne <marc.c.dionne@auristor.com>
Reviewed-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Cache the congestion window setting that was determined during a call's
transmission phase when it finishes so that it can be used by the next call
to the same peer, thereby shortcutting the slow-start algorithm.

The value is stored in the rxrpc_peer struct and is accessed without
locking.  Each call takes the value that happens to be there when it starts
and just overwrites the value when it finishes.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Provide a control message that can be specified on the first sendmsg() of a
client call or the first sendmsg() of a service response to indicate the
total length of the data to be transmitted for that call.

Currently, because the length of the payload of an encrypted DATA packet is
encrypted in front of the data, the packet cannot be encrypted until we
know how much data it will hold.

By specifying the length at the beginning of the transmit phase, each DATA
packet length can be set before we start loading data from userspace (where
several sendmsg() calls may contribute to a particular packet).

An error will be returned if too little or too much data is presented in
the Tx phase.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Consolidate the sendmsg control message parameters into a struct rather
than passing them individually through the argument list of
rxrpc_sendmsg_cmsg().  This makes it easier to add more parameters.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Provide a getsockopt() call that can query what cmsg types are supported by
AF_RXRPC.

Make it possible for a client to use AuriStor's service upgrade facility.

The client does this by adding an RXRPC_UPGRADE_SERVICE control message to
the first sendmsg() of a call.  This takes no parameters.

When recvmsg() starts returning data from the call, the service ID field in
the returned msg_name will reflect the result of the upgrade attempt.  If
the upgrade was ignored, srx_service will match what was set in the
sendmsg(); if the upgrade happened the srx_service will be altered to
indicate the service the server upgraded to.

Note that:

 (1) The choice of upgrade service is up to the server

 (2) Further client calls to the same server that would share a connection
     are blocked if an upgrade probe is in progress.

 (3) This should only be used to probe the service.  Clients should then
     use the returned service ID in all subsequent communications with that
     server (and not set the upgrade).  Note that the kernel will not
     retain this information should the connection expire from its cache.

 (4) If a server that supports upgrading is replaced by one that doesn't,
     whilst a connection is live, and if the replacement is running, say,
     OpenAFS 1.6.4 or older or an older IBM AFS, then the replacement
     server will not respond to packets sent to the upgraded connection.

     At this point, calls will time out and the server must be reprobed.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Implement AuriStor's service upgrade facility.  There are three problems
that this is meant to deal with:

 (1) Various of the standard AFS RPC calls have IPv4 addresses in their
     requests and/or replies - but there's no room for including IPv6
     addresses.

 (2) Definition of IPv6-specific RPC operations in the standard operation
     sets has not yet been achieved.

 (3) One could envision the creation a new service on the same port that as
     the original service.  The new service could implement improved
     operations - and the client could try this first, falling back to the
     original service if it's not there.

     Unfortunately, certain servers ignore packets addressed to a service
     they don't implement and don't respond in any way - not even with an
     ABORT.  This means that the client must then wait for the call timeout
     to occur.

What service upgrade does is to see if the connection is marked as being
'upgradeable' and if so, change the service ID in the server and thus the
request and reply formats.  Note that the upgrade isn't mandatory - a
server that supports only the original call set will ignore the upgrade
request.

In the protocol, the procedure is then as follows:

 (1) To request an upgrade, the first DATA packet in a new connection must
     have the userStatus set to 1 (this is normally 0).  The userStatus
     value is normally ignored by the server.

 (2) If the server doesn't support upgrading, the reply packets will
     contain the same service ID as for the first request packet.

 (3) If the server does support upgrading, all future reply packets on that
     connection will contain the new service ID and the new service ID will
     be applied to *all* further calls on that connection as well.

 (4) The RPC op used to probe the upgrade must take the same request data
     as the shadow call in the upgrade set (but may return a different
     reply).  GetCapability RPC ops were added to all standard sets for
     just this purpose.  Ops where the request formats differ cannot be
     used for probing.

 (5) The client must wait for completion of the probe before sending any
     further RPC ops to the same destination.  It should then use the
     service ID that recvmsg() reported back in all future calls.

 (6) The shadow service must have call definitions for all the operation
     IDs defined by the original service.


To support service upgrading, a server should:

 (1) Call bind() twice on its AF_RXRPC socket before calling listen().
     Each bind() should supply a different service ID, but the transport
     addresses must be the same.  This allows the server to receive
     requests with either service ID.

 (2) Enable automatic upgrading by calling setsockopt(), specifying
     RXRPC_UPGRADEABLE_SERVICE and passing in a two-member array of
     unsigned shorts as the argument:

	unsigned short optval[2];

     This specifies a pair of service IDs.  They must be different and must
     match the service IDs bound to the socket.  Member 0 is the service ID
     to upgrade from and member 1 is the service ID to upgrade to.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Permit bind() to be called on an AF_RXRPC socket more than once (currently
maximum twice) to bind multiple listening services to it.  There are some
restrictions:

 (1) All bind() calls involved must have a non-zero service ID.

 (2) The service IDs must all be different.

 (3) The rest of the address (notably the transport part) must be the same
     in all (a single UDP socket is shared).

 (4) This must be done before listen() or sendmsg() is called.

This allows someone to connect to the service socket with different service
IDs and lays the foundation for service upgrading.

The service ID used by an incoming call can be extracted from the msg_name
returned by recvmsg().
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Keep the rxrpc_connection struct's idea of the service ID that is exposed
in the protocol separate from the service ID that's used as a lookup key.

This allows the protocol service ID on a client connection to get upgraded
without making the connection unfindable for other client calls that also
would like to use the upgraded connection.

The connection's actual service ID is then returned through recvmsg() by
way of msg_name.

Whilst we're at it, we get rid of the last_service_id field from each
channel.  The service ID is per-connection, not per-call and an entire
connection is upgraded in one go.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Acked-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The proc_remove call is dead code as it occurs after a return and
hence can never be called. Remove it.

Detected by CoverityScan, CID#1437743 ("Logically dead code")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Support network namespacing in AF_RXRPC with the following changes:

 (1) All the local endpoint, peer and call lists, locks, counters, etc. are
     moved into the per-namespace record.

 (2) All the connection tracking is moved into the per-namespace record
     with the exception of the client connection ID tree, which is kept
     global so that connection IDs are kept unique per-machine.

 (3) Each namespace gets its own epoch.  This allows each network namespace
     to pretend to be a separate client machine.

 (4) The /proc/net/rxrpc_xxx files are now called /proc/net/rxrpc/xxx and
     the contents reflect the namespace.

fs/afs/ should be okay with this patch as it explicitly requires the current
net namespace to be init_net to permit a mount to proceed at the moment.  It
will, however, need updating so that cells, IP addresses and DNS records are
per-namespace also.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a tracepoint (rxrpc_connect_call) to log the combination of rxrpc_call
pointer, afs_call pointer/user data and wire call parameters to make it
easier to match the tracebuffer contents to captured network packets.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Add a tracepoint (rxrpc_rx_rwind_change) to log changes in a call's receive
window size as imposed by the peer through an ACK packet.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Add a tracepoint (rxrpc_rx_abort) to record received aborts.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Add a tracepoint (rxrpc_rx_proto) to record protocol errors in received
packets.  The following changes are made:

 (1) Add a function, __rxrpc_abort_eproto(), to note a protocol error on a
     call and mark the call aborted.  This is wrapped by
     rxrpc_abort_eproto() that makes the why string usable in trace.

 (2) Add trace_rxrpc_rx_proto() or rxrpc_abort_eproto() to protocol error
     generation points, replacing rxrpc_abort_call() with the latter.

 (3) Only send an abort packet in rxkad_verify_packet*() if we actually
     managed to abort the call.

Note that a trace event is also emitted if a kernel user (e.g. afs) tries
to send data through a call when it's not in the transmission phase, though
it's not technically a receive event.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

In the rxkad security module, when we encounter a temporary error (such as
ENOMEM) from which we could conceivably recover, don't abort the
connection, but rather permit retransmission of the relevant packets to
induce a retry.

Note that I'm leaving some places that could be merged together to insert
tracing in the next patch.

Signed-off-by; David Howells <dhowells@redhat.com>

Make rxrpc_kernel_abort_call() return an indication as to whether it
actually aborted the operation or not so that kafs can trace the failure of
the operation.  Note that 'success' in this context means changing the
state of the call, not necessarily successfully transmitting an ABORT
packet.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Use negative error codes in struct rxrpc_call::error because that's what
the kernel normally deals with and to make the code consistent.  We only
turn them positive when transcribing into a cmsg for userspace recvmsg.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

If we receive a BUSY packet for a call we think we've just completed, the
packet is handed off to the connection processor to deal with - but the
connection processor doesn't expect a BUSY packet and so flags a protocol
error.

Fix this by simply ignoring the BUSY packet for the moment.

The symptom of this may appear as a system call failing with EPROTO.  This
may be triggered by pressing ctrl-C under some circumstances.

This comes about we abort calls due to interruption by a signal (which we
shouldn't do, but that's going to be a large fix and mostly in fs/afs/).
What happens is that we abort the call and may also abort follow up calls
too (this needs offloading somehoe).  So we see a transmission of something
like the following sequence of packets:

	DATA for call N
	ABORT call N
	DATA for call N+1
	ABORT call N+1

in very quick succession on the same channel.  However, the peer may have
deferred the processing of the ABORT from the call N to a background thread
and thus sees the DATA message from the call N+1 coming in before it has
cleared the channel.  Thus it sends a BUSY packet[*].

[*] Note that some implementations (OpenAFS, for example) mark the BUSY
    packet with one plus the callNumber of the call prior to call N.
    Ordinarily, this would be call N, but there's no requirement for the
    calls on a channel to be numbered strictly sequentially (the number is
    required to increase).

    This is wrong and means that the callNumber in the BUSY packet should
    be ignored (it really ought to be N+1 since that's what it's in
    response to).
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The RxRPC ACK packet may contain an extension that includes the peer's
current Rx window size for this call.  We adjust the local Tx window size
to match.  However, the transmitter can stall if the receive window is
reduced to 0 by the peer and then reopened.

This is because the normal way that the transmitter is re-energised is by
dropping something out of our Tx queue and thus making space.  When a
single gap is made, the transmitter is woken up.  However, because there's
nothing in the Tx queue at this point, this doesn't happen.

To fix this, perform a wake_up() any time we see the peer's Rx window size
increasing.

The observable symptom is that calls start failing on ETIMEDOUT and the
following:

	kAFS: SERVER DEAD state=-62

appears in dmesg.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If rxrpc_kernel_send_data() is asked to send data through a call that has
already failed (due to a remote abort, received protocol error or network
error), then return the associated error code saved in the call rather than
ESHUTDOWN.

This allows the caller to work out whether to ask for the abort code or not
based on this.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The call state may be changed at any time by the data-ready routine in
response to received packets, so if the call state is to be read and acted
upon several times in a function, READ_ONCE() must be used unless the call
state lock is held.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>