These files are non modular, but need to export symbols using
the macros now living in export.h -- call out the include so
that things won't break when we remove the implicit presence
of module.h from everywhere.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

These files were getting access to these two via the implicit
presence of module.h everywhere.  They aren't modules, so they
don't need the full module.h inclusion though.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

With calls to modular infrastructure, these files really
needs the full module.h header.  Call it out so some of the
cleanups of implicit and unrequired includes elsewhere can be
cleaned up.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

These files were getting <linux/module.h> via an implicit non-obvious
path, but we want to crush those out of existence since they cost
time during compiles of processing thousands of lines of headers
for no reason.  Give them the lightweight header that just contains
the EXPORT_SYMBOL infrastructure.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

The file rcutiny.c does not need moduleparam.h header, as
there are no modparams in this file.

However rcutiny_plugin.h does define a module_init() and
a module_exit() and it uses the various MODULE_ macros, so
it really does need module.h included.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Through various other implicit include paths, some files were
getting the full module.h file, and hence living the illusion
that they really only needed moduleparam.h -- but the reality
is that once you remove the module.h presence, these show up:

kernel/params.c:583: warning: ‘struct module_kobject’ declared inside parameter list

Such files really require module.h so simply make it so.  As the
file module.h grabs moduleparam.h on the fly, all will be well.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

With the module.h usage cleanup, we'll get this:

kernel/ksysfs.c:161: error: ‘S_IRUGO’ undeclared here (not in a function)
make[2]: *** [kernel/ksysfs.o] Error 1
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Up until now, this file was getting percpu.h because nearly every
file was implicitly getting module.h (and all its sub-includes).
But we want to clean that up, so call out percpu.h explicitly.
Otherwise we'll get things like this on an ARM build:

kernel/irq_work.c:48: error: expected declaration specifiers or '...' before 'irq_work_list'
kernel/irq_work.c:48: warning: type defaults to 'int' in declaration of 'DEFINE_PER_CPU'

The same thing was happening for builds on ARM for asm/processor.h

kernel/irq_work.c: In function 'irq_work_sync':
kernel/irq_work.c:166: error: implicit declaration of function 'cpu_relax'
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

These files were implicitly relying on <linux/kmod.h> coming in via
module.h, as without it we get things like:

kernel/power/suspend.c:100: error: implicit declaration of function ‘usermodehelper_disable’
kernel/power/suspend.c:109: error: implicit declaration of function ‘usermodehelper_enable’
kernel/power/user.c:254: error: implicit declaration of function ‘usermodehelper_disable’
kernel/power/user.c:261: error: implicit declaration of function ‘usermodehelper_enable’

kernel/sys.c:317: error: implicit declaration of function ‘usermodehelper_disable’
kernel/sys.c:1816: error: implicit declaration of function ‘call_usermodehelper_setup’
kernel/sys.c:1822: error: implicit declaration of function ‘call_usermodehelper_setfns’
kernel/sys.c:1824: error: implicit declaration of function ‘call_usermodehelper_exec’
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

These files are doing things like module_put and try_module_get
so they need to call out the module.h for explicit inclusion,
rather than getting it via <linux/device.h> which we ideally want
to remove the module.h inclusion from.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

The changed files were only including linux/module.h for the
EXPORT_SYMBOL infrastructure, and nothing else.  Revector them
onto the isolated export header for faster compile times.

Nothing to see here but a whole lot of instances of:

  -#include <linux/module.h>
  +#include <linux/export.h>

This commit is only changing the kernel dir; next targets
will probably be mm, fs, the arch dirs, etc.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

The removal of the implicitly everywhere module.h and its child includes
will reveal this implicit stat.h usage:

mm/dmapool.c:108: error: ‘S_IRUGO’ undeclared here (not in a function)
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

The files changed within are only using the EXPORT_SYMBOL
macro variants.  They are not using core modular infrastructure
and hence don't need module.h but only the export.h header.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

These files were getting <linux/module.h> via an implicit include
path, but we want to crush those out of existence since they cost
time during compiles of processing thousands of lines of headers
for no reason.  Give them the lightweight header that just contains
the EXPORT_SYMBOL infrastructure.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

There is nothing modular in these files, and no reason to drag
in all the 357 headers that module.h brings with it, since
it just slows down compiles.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

This file isn't doing anything with modules and so it should
not be including <linux/module.h> just to get basic stuff
like printk() and min/max.  Revector it to <linux/kernel.h>.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

There are files which use module_param and MODULE_PARM_DESC
back to back.  They only include moduleparam.h which makes sense,
but the implicit presence of module.h everywhere hid the fact
that MODULE_PARM_DESC wasn't in moduleparam.h at all.  Relocate
the macro to moduleparam.h so that the moduleparam infrastructure
can be used independently of module.h
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

A lot of files pull in module.h when all they are really
looking for is the basic EXPORT_SYMBOL functionality. The
recent data from Ingo[1] shows that this is one of several
instances that has a significant impact on compile times,
and it should be targeted for factoring out (as done here).

Note that several commonly used header files in include/*
directly include <linux/module.h> themselves (some 34 of them!)
The most commonly used ones of these will have to be made
independent of module.h before the full benefit of this change
can be realized.

We also transition THIS_MODULE from module.h to export.h,
since there are lots of files with subsystem structs that
in turn will have a struct module *owner and only be doing:

	.owner = THIS_MODULE;

and absolutely nothing else modular. So, we also want to have
the THIS_MODULE definition present in the lightweight header.

[1] https://lkml.org/lkml/2011/5/23/76Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c: Functions for byte-swapped smbus_write/read_word_data
  i2c-algo-pca: Return standard fault codes
  i2c-algo-bit: Return standard fault codes
  i2c-algo-bit: Be verbose on bus testing failure
  i2c-algo-bit: Let user test buses without failing
  i2c/scx200_acb: Fix section mismatch warning in scx200_pci_drv
  i2c: I2C_ELEKTOR should depend on HAS_IOPORT

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (33 commits)
  iommu/core: Remove global iommu_ops and register_iommu
  iommu/msm: Use bus_set_iommu instead of register_iommu
  iommu/omap: Use bus_set_iommu instead of register_iommu
  iommu/vt-d: Use bus_set_iommu instead of register_iommu
  iommu/amd: Use bus_set_iommu instead of register_iommu
  iommu/core: Use bus->iommu_ops in the iommu-api
  iommu/core: Convert iommu_found to iommu_present
  iommu/core: Add bus_type parameter to iommu_domain_alloc
  Driver core: Add iommu_ops to bus_type
  iommu/core: Define iommu_ops and register_iommu only with CONFIG_IOMMU_API
  iommu/amd: Fix wrong shift direction
  iommu/omap: always provide iommu debug code
  iommu/core: let drivers know if an iommu fault handler isn't installed
  iommu/core: export iommu_set_fault_handler()
  iommu/omap: Fix build error with !IOMMU_SUPPORT
  iommu/omap: Migrate to the generic fault report mechanism
  iommu/core: Add fault reporting mechanism
  iommu/core: Use PAGE_SIZE instead of hard-coded value
  iommu/core: use the existing IS_ALIGNED macro
  iommu/msm: ->unmap() should return order of unmapped page
  ...

Fixup trivial conflicts in drivers/iommu/Makefile: "move omap iommu to
dedicated iommu folder" vs "Rename the DMAR and INTR_REMAP config
options" just happened to touch lines next to each other.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  amd64_edac: Cleanup return type of amd64_determine_edac_cap()
  amd64_edac: Add a fix for Erratum 505
  EDAC, MCE, AMD: Simplify NB MCE decoder interface
  EDAC, MCE, AMD: Drop local coreid reporting
  EDAC, MCE, AMD: Print valid addr when reporting an error
  EDAC, MCE, AMD: Print CPU number when reporting the error

* 'kvm-updates/3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: (75 commits)
  KVM: SVM: Keep intercepting task switching with NPT enabled
  KVM: s390: implement sigp external call
  KVM: s390: fix register setting
  KVM: s390: fix return value of kvm_arch_init_vm
  KVM: s390: check cpu_id prior to using it
  KVM: emulate lapic tsc deadline timer for guest
  x86: TSC deadline definitions
  KVM: Fix simultaneous NMIs
  KVM: x86 emulator: convert push %sreg/pop %sreg to direct decode
  KVM: x86 emulator: switch lds/les/lss/lfs/lgs to direct decode
  KVM: x86 emulator: streamline decode of segment registers
  KVM: x86 emulator: simplify OpMem64 decode
  KVM: x86 emulator: switch src decode to decode_operand()
  KVM: x86 emulator: qualify OpReg inhibit_byte_regs hack
  KVM: x86 emulator: switch OpImmUByte decode to decode_imm()
  KVM: x86 emulator: free up some flag bits near src, dst
  KVM: x86 emulator: switch src2 to generic decode_operand()
  KVM: x86 emulator: expand decode flags to 64 bits
  KVM: x86 emulator: split dst decode to a generic decode_operand()
  KVM: x86 emulator: move memop, memopp into emulation context
  ...

* 'fbdev-next' of git://github.com/schandinat/linux-2.6: (270 commits)
  video: platinumfb: Add __devexit_p at necessary place
  drivers/video: fsl-diu-fb: merge diu_pool into fsl_diu_data
  drivers/video: fsl-diu-fb: merge diu_hw into fsl_diu_data
  drivers/video: fsl-diu-fb: only DIU modes 0 and 1 are supported
  drivers/video: fsl-diu-fb: remove unused panel operating mode support
  drivers/video: fsl-diu-fb: use an enum for the AOI index
  drivers/video: fsl-diu-fb: add several new video modes
  drivers/video: fsl-diu-fb: remove broken screen blanking support
  drivers/video: fsl-diu-fb: move some definitions out of the header file
  drivers/video: fsl-diu-fb: fix some ioctls
  video: da8xx-fb: Increased resolution configuration of revised LCDC IP
  OMAPDSS: picodlp: add missing #include <linux/module.h>
  fb: fix au1100fb bitrot.
  mx3fb: fix NULL pointer dereference in screen blanking.
  video: irq: Remove IRQF_DISABLED
  smscufx: change edid data to u8 instead of char
  OMAPDSS: DISPC: zorder support for DSS overlays
  OMAPDSS: DISPC: VIDEO3 pipeline support
  OMAPDSS/OMAP_VOUT: Fix incorrect OMAP3-alpha compatibility setting
  video/omap: fix build dependencies
  ...

Fix up conflicts in:
 - drivers/staging/xgifb/XGI_main_26.c
	Changes to XGIfb_pan_var()
 - drivers/video/omap/{lcd_apollon.c,lcd_ldp.c,lcd_overo.c}
	Removed (or in the case of apollon.c, merged into the generic
	DSS panel in drivers/video/omap2/displays/panel-generic-dpi.c)

Reimplemented at least 17 times discounting error mangling cases
where it could be used.
Signed-off-by: NJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Adjust i2c-algo-pca to return fault codes compliant with
Documentation/i2c/fault-codes, rather than the undocumented and
vague -EREMOTEIO.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Wolfram Sang <w.sang@pengutronix.de>

Adjust i2c-algo-bit to return fault codes compliant with
Documentation/i2c/fault-codes, rather than the undocumented and
vague -EREMOTEIO.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

If bus testing fails due to the bus being seen as busy, it might be
helpful for developers to know which line is unexpectedly low.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Reviewed-by: NAlex Deucher <alexdeucher@gmail.com>

Always failing to register I2C buses when the line testing fails is a
little harsh. While such a failure is definitely a bug in the driver
that exposes the affected I2C bus, things may still work fine if the
missing initialization steps are done later, before the I2C bus is
used. So it seems a better debugging tool to just report the test
failure by default. I introduce bit_test=2 if anyone really misses the
original behavior of bit_test=1.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Reviewed-by: NAlex Deucher <alexdeucher@gmail.com>

WARNING: drivers/i2c/busses/built-in.o(.data+0x47c8): Section mismatch in reference from the variable scx200_pci_drv to the function .devinit.text:scx200_probe()
The variable scx200_pci_drv references
the function __devinit scx200_probe()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console
Signed-off-by: NHarvey Yang <harvey.huawei.yang@gmail.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

On m68k, I get:

drivers/i2c/busses/i2c-elektor.c: In function ‘pcf_isa_init’:
drivers/i2c/busses/i2c-elektor.c:153: error: implicit declaration of function ‘ioport_map’
drivers/i2c/busses/i2c-elektor.c:153: warning: assignment makes pointer from integer without a cast
drivers/i2c/busses/i2c-elektor.c: In function ‘elektor_probe’:
drivers/i2c/busses/i2c-elektor.c:287: error: implicit declaration of function ‘ioport_unmap’

Since commit 82ed223c ("iomap: make IOPORT/PCI
mapping functions conditional"), ioport_map() is only available on platforms
that set HAS_IOPORT.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

AMD processors apparently have a bug in the hardware task switching
support when NPT is enabled. If the task switch triggers a NPF, we can
get wrong EXITINTINFO along with that fault. On resume, spurious
exceptions may then be injected into the guest.

We were able to reproduce this bug when our guest triggered #SS and the
handler were supposed to run over a separate task with not yet touched
stack pages.

Work around the issue by continuing to emulate task switches even in
NPT mode.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Implement sigp external call, which might be required for guests that
issue an external call instead of an emergency signal for IPI.

This fixes an issue with "KVM: unknown SIGP: 0x02" when booting
such an SMP guest.
Signed-off-by: NChristian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

KVM common code does vcpu_load prior to calling our arch ioctls and
vcpu_put after we're done here. Via the kvm_arch_vcpu_load/put
callbacks we do load the fpu and access register state into the
processor, which saves us moving the state on every SIE exit the
kernel handles. However this breaks register setting from userspace,
because of the following sequence:
1a. vcpu load stores userspace register content
1b. vcpu load loads guest register content
2.  kvm_arch_vcpu_ioctl_set_fpu/sregs updates saved guest register content
3a. vcpu put stores the guest registers and overwrites the new content
3b. vcpu put loads the userspace register set again

This patch loads the new guest register state into the cpu, so that the correct
(new) set of guest registers will be stored in step 3a.
Signed-off-by: NCarsten Otte <cotte@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This patch fixes the return value of kvm_arch_init_vm in case a memory
allocation goes wrong.
Signed-off-by: NCarsten Otte <cotte@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

We use the cpu id provided by userspace as array index here. Thus we
clearly need to check it first. Ooops.

CC: <stable@vger.kernel.org>
Signed-off-by: NCarsten Otte <cotte@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

* git://github.com/rustyrussell/linux:
  lguest: move process freezing before pending signals check
  lguest: don't allow KVM-detection cpuid.
  lguest: Allow running under paravirt-enabled KVM.

* 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6:
  ARM: mark empty gpio.h files empty
  gpio: Fix ARM versatile-express build failure
  of: include errno.h

* 'spi/next' of git://git.secretlab.ca/git/linux-2.6:
  drivercore: Add helper macro for platform_driver boilerplate
  spi: irq: Remove IRQF_DISABLED
  OMAP: SPI: Fix the trying to free nonexistent resource error
  spi/spi-ep93xx: add module.h include
  spi/tegra: fix compilation error in spi-tegra.c
  spi: spi-dw: fix all sparse warnings
  spi/spi-pl022: Call pl022_dma_remove(pl022) only if enable_dma is true
  spi/spi-pl022: calculate_effective_freq() must set rate <= requested rate
  spi/spi-pl022: Don't allocate more sg than required.
  spi/spi-pl022: Use GFP_ATOMIC for allocation from tasklet
  spi/spi-pl022: Resolve formatting issues

* 'gpio/next' of git://git.secretlab.ca/git/linux-2.6:
  h8300: Move gpio.h to gpio-internal.h
  gpio: pl061: add DT binding support
  gpio: fix build error in include/asm-generic/gpio.h
  gpiolib: Ensure struct gpio is always defined
  irq: Add EXPORT_SYMBOL_GPL to function of irq generic-chip
  gpio-ml-ioh: Use NUMA_NO_NODE not GFP_KERNEL
  gpio-pch: Use NUMA_NO_NODE not GFP_KERNEL
  gpio: langwell: ensure alternate function is cleared
  gpio-pch: Support interrupt function
  gpio-pch: Save register value in suspend()
  gpio-pch: modify gpio_nums and mask
  gpio-pch: support ML7223 IOH n-Bus
  gpio-pch: add spinlock in suspend/resume processing
  gpio-pch: Delete invalid "restore" code in suspend()
  gpio-ml-ioh: Fix suspend/resume issue
  gpio-ml-ioh: Support interrupt function
  gpio-ml-ioh: Delete unnecessary code
  gpio/mxc: add chained_irq_enter/exit() to mx3_gpio_irq_handler()
  gpio/nomadik: use genirq core to track enablement
  gpio/nomadik: disable clocks when unused

It is generally a better idea to make intentionally empty files
contain the human-readable /* empty */ comment, also it makes
the files play nice with "make distclean".
Reported-by: NJeff Garzik <jeff@garzik.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NJeff Garzik <jeff@garzik.org>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>