- 10 3月, 2017 1 次提交
-
-
由 Michael Chan 提交于
Set DCB_CAP_DCBX_HOST capability flag only if the firmware LLDP agent is not running. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 2月, 2017 2 次提交
-
-
由 Michael Chan 提交于
Print FEC (Forward Error Correction) autoneg and encoding settings during link up. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The new spec has NVRAM defragmentation support which will be used in the next patch to improve ethtool flash operation. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 2月, 2017 12 次提交
-
-
由 Michael Chan 提交于
Add dedicated transmit function and transmit completion handler for XDP. The XDP transmit logic and completion logic are different than regular TX ring. The TX buffer is recycled back to the RX ring when it completes. v3: Improved the buffer recyling scheme for XDP_TX. v2: Add trace_xdp_exception(). Add dma_sync. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Tested-by: NAndy Gospodarek <gospo@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add basic ndo_xdp support to setup and query program, configure the NIC to run in rx page mode, and support XDP_PASS, XDP_DROP, XDP_ABORTED actions only. v3: Pass modified offset and length to stack for XDP_PASS. Remove Kconfig option. v2: Added trace_xdp_exception() Added dma_syncs. Added XDP headroom support. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Tested-by: NAndy Gospodarek <gospo@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
XDP_TX requires a different function to handle completion. Add a function pointer to handle tx completion logic. Regular TX rings will be assigned the current bnxt_tx_int() for the ->tx_int() function pointer. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add logic for an extra set of TX rings for XDP. If enabled, this set of TX rings equals the number of RX rings and shares the same IRQ as the RX ring set. A new field bp->tx_nr_rings_xdp is added to keep track of these TX XDP rings. Adjust all other relevant functions to handle bp->tx_nr_rings_xdp. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
To support XDP_TX, we need to add a set of dedicated TX rings, each associated with the NAPI of an RX ring. To assign XDP rings and regular rings in a flexible way, we add a bp->tx_ring_map[] array to do the remapping. The netdev txq index is stored in the new field txq_index so that we can retrieve the netdev txq when handling TX completions. In this patch, before we introduce XDP_TX, the mapping is 1:1. v2: Fixed a bug in bnxt_tx_int(). Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Currently, bnxt_setup_tc() and bnxt_set_channels() have similar and duplicated code to check and reserve rx and tx rings. Add a new function bnxt_reserve_rings() to centralize the logic. This will make it easier to add XDP_TX support which requires allocating a new set of TX rings. Also, the tx ring checking logic in bnxt_setup_msix() can be removed. The rings have been reserved before hand. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
In the current code, we have separate rx_event and agg_event parameters to keep track of rx and aggregation events. Combine these events into an u8 event mask with different bits defined for different events. This way, it is easier to expand the logic to include XDP tx events. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
This mode is to support XDP. In this mode, each rx ring is configured with page sized buffers for linear placement of each packet. MTU will be restricted to what the page sized buffers can support. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Convert the global constants BNXT_RX_OFFSET and BNXT_RX_DMA_OFFSET to device parameters. This will make it easier to support XDP with headroom support which requires different RX buffer offsets. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
When driver is running in XDP mode, rx buffers are DMA mapped as DMA_BIDIRECTIONAL. Add a field so the code will map/unmap rx buffers according to this field. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
To support XDP_TX, we need the RX buffer's DMA address to transmit the packet. Convert the DMA address field to a permanent field in bnxt_sw_rx_bd. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Minor refactoring of bnxt_rx_skb() so that it can easily be replaced by a new function that handles packets in a single page. Also, use a function pointer bp->rx_skb_func() to switch to a new function when we add the new mode in the next patch. Add a new field data_ptr that points to the packet data in the bnxt_sw_rx_bd structure. The original data field is changed to void pointer so that it can either hold the kmalloc'ed data or a page pointer. The last parameter of bnxt_rx_skb() which was the length parameter is changed to include the payload offset of the packet in the upper 16 bit. The offset is needed to support the rx page mode and is not used in this existing function. v3: Added a new data_ptr parameter to bp->rx_skb_func(). The caller has the option to modify the starting address of the packet. This will be needed when XDP with headroom support is added. v2: Changed the name of the last parameter to offset_and_len to make the code more clear. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 1月, 2017 1 次提交
-
-
由 Michael Chan 提交于
Add LED blinking code to support ethtool -p on the PF. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 12月, 2016 6 次提交
-
-
由 Michael Chan 提交于
The current code assumes that we will always have at least 2 rx rings, 1 will be used as an aggregation ring for TPA and jumbo page placements. However, it is possible, especially on a VF, that there is only 1 rx ring available. In this scenario, the current code will fail to initialize. To handle it, we need to properly set up only 1 ring without aggregation. Set a new flag BNXT_FLAG_NO_AGG_RINGS for this condition and add logic to set up the chip to place RX data linearly into a single buffer per packet. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
In order to properly support TX rate limiting in SRIOV VF functions or NPAR functions, firmware needs better control over tx ring allocations. The new scheme requires the driver to reserve the number of tx rings and to query to see if the requested number of tx rings is reserved. The driver will use the new scheme when the firmware interface spec is 1.6.1 or newer. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The existing hardware RFS mode uses one hardware RSS context block per ring just to calculate the RSS hash. This is very wasteful and prevents VF functions from using it. The new hardware mode shares the same hardware RSS context for RSS placement and RFS steering. This allows VFs to enable RFS. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The new vnic RSS capability will enhance NTUPLE support, to be added in subsequent patches. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The advertising field is closely related to the auto_link_speeds field. The former is the user setting while the latter is the firmware setting. Both should be u16. We should use the advertising field in bnxt_get_link_ksettings because the auto_link_speeds field may not be updated with the latest from the firmware yet. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Use native NAPI polling instead. The next patch will complete the work by switching to use napi_complete_done() Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 12月, 2016 7 次提交
-
-
由 Michael Chan 提交于
Since the network driver and RDMA driver operate on the same PCI function, we need to create an interface to allow the RDMA driver to share resources with the network driver. 1. Create a new bnxt_en_dev struct which will be returned by bnxt_ulp_probe() upon success. After that, all calls from the RDMA driver to bnxt_en will pass a pointer to this struct. 2. This struct contains additional function pointers to register, request msix, send fw messages, register for async events. 3. If the RDMA driver wants to enable RDMA on the function, it needs to call the function pointer bnxt_register_device(). A ulp_ops structure is passed for RCU protected upcalls from bnxt_en to the RDMA driver. 4. The RDMA driver can call firmware APIs using the bnxt_send_fw_msg() function pointer. 5. 1 stats context is reserved when the RDMA driver registers. MSIX and completion rings are reserved when the RDMA driver calls bnxt_request_msix() function pointer. 6. When the RDMA driver calls bnxt_unregister_device(), all RDMA resources will be cleaned up. v2: Fixed 2 uninitialized variable warnings. Signed-off-by: NSomnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The driver register function with firmware consists of passing version information and registering for async events. To support the RDMA driver, the async events that we need to register may change. Separate the driver register function into 2 parts so that we can just update the async events for the RDMA driver. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
If the device supports RDMA, we'll setup network default rings so that there are enough minimum resources for RDMA, if possible. However, the user can still increase network rings to the max if he wants. The actual RDMA resources won't be reserved until the RDMA driver registers. v2: Fix compile warning when BNXT_CONFIG_SRIOV is not set. Signed-off-by: NSomnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
All available remaining completion rings not used by the PF should be made available for the VFs so that there are enough rings in the VF to support RDMA. The earlier workaround code of capping the rings by the statistics context is removed. When SRIOV is disabled, call a new function bnxt_restore_pf_fw_resources() to restore FW resources. Later on we need to add some logic to account for RDMA resources. Signed-off-by: NSomnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Now that MSIX is enabled in bnxt_init_one(), resources may be allocated by the RDMA driver before the network device is opened. So we cannot do function reset in bnxt_open() which will clear all the resources. The proper place to do function reset now is in bnxt_init_one(). If we get AER, we'll do function reset as well. Signed-off-by: NSomnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
To better support the new RDMA driver, we need to move pci_enable_msix() from bnxt_open() to bnxt_init_one(). This way, MSIX vectors are available to the RDMA driver whether the network device is up or down. Part of the existing bnxt_setup_int_mode() function is now refactored into a new bnxt_init_int_mode(). bnxt_init_int_mode() is called during bnxt_init_one() to enable MSIX. The remaining logic in bnxt_setup_int_mode() to map the IRQs to the completion rings is called during bnxt_open(). v2: Fixed compile warning when CONFIG_BNXT_SRIOV is not set. Signed-off-by: NSomnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
By refactoring existing code into this new function. The new function will be used in subsequent patches. v2: Fixed compile warning when CONFIG_BNXT_SRIOV is not set. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 12月, 2016 4 次提交
-
-
由 Michael Chan 提交于
Report PFC statistics to ethtool -S and DCBNL. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Support only IEEE DCBX initially. Add IEEE DCBNL ops and functions to get and set the hardware DCBX parameters. The DCB code is conditional on Kconfig CONFIG_BNXT_DCB. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Latest interface has the latest DCB command structs. Get and store the max number of lossless TCs the hardware can support. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add a new function bnxt_setup_mq_tc() to handle MQPRIO. This new function will be called during ETS setup when we add DCBNL in the next patch. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 11月, 2016 2 次提交
-
-
由 Michael Chan 提交于
The newer chips have proper support for 4-tuple UDP RSS. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
On some dual port NICs, the speed setting on one port can affect the available speed on the other port. Add logic to detect these changes and adjust the advertised speed settings when necessary. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 9月, 2016 4 次提交
-
-
由 Michael Chan 提交于
The hardware has a limitation that it won't pass host to BMC loopback packets below 52-bytes. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rob Swindell 提交于
Using Ethtool flashdev command, entire NVM package (*.pkg) files may now be staged into the "update" area of the NVM and subsequently verified and installed by the firmware using the newly introduced command: NVM_INSTALL_UPDATE. We also introduce use of the new firmware command FW_SET_TIME so that the NVM-resident package installation log contains valid time-stamps. Signed-off-by: NRob Swindell <Rob.Swindell@broadcom.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
And remove redundant definitions of the same flags. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 7月, 2016 1 次提交
-
-
由 Michael Chan 提交于
Include the destination MAC address in the ntuple filter structure. The current code assumes that the destination MAC address is always the MAC address of the NIC. This may not be true if there are macvlans, for example. Add destination MAC address checking and configure the filter correctly using the correct index for the destination MAC address. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-