- 09 5月, 2014 6 次提交
-
-
由 Catalin Marinas 提交于
The ARMv8 architecture allows execute-only user permissions by clearing the PTE_UXN and PTE_USER bits. The kernel, however, can still access such page, so execute-only page permission does not protect against read(2)/write(2) etc. accesses. Systems requiring such protection must implement/enable features like SECCOMP. This patch changes the arm64 __P100 and __S100 protection_map[] macros to the new __PAGE_EXECONLY attributes. A side effect is that pte_valid_user() no longer triggers for __PAGE_EXECONLY since PTE_USER isn't set. To work around this, the check is done on the PTE_NG bit via the pte_valid_ng() macro. VM_READ is also checked now for page faults. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Catalin Marinas 提交于
This information is useful for instruction emulators to detect read/write and access size without having to decode the faulting instruction. The current patch exports it via sigcontext (struct esr_context) and is only valid for SIGSEGV and SIGBUS. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Catalin Marinas 提交于
This patch removes the aux_context structure (and the containing file) to allow the placement of the _aarch64_ctx end magic based on the context stored on the signal stack. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Catalin Marinas 提交于
For AArch32, bit 11 (WnR) of the FSR/ESR register is set when the fault was caused by a write access and applications like Qemu rely on such information being provided in sigcontext. This patch introduces the ESR_EL1 tracking for the arm64 kernel faults and sets bit 11 accordingly in compat sigcontext. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Catalin Marinas 提交于
The synchronisation with the boot thread already happens in __cpu_up() via wait_for_completion_timeout(). In addition, __cpu_up() calls are protected by the cpu_add_remove_lock mutex and already serialised. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Catalin Marinas 提交于
The hardware provides the maximum cache line size in the system via the CTR_EL0.CWG bits. This patch implements the cache_line_size() function to read such information, together with a sanity check if the statically defined L1_CACHE_BYTES is smaller than the hardware value. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Acked-by: NWill Deacon <will.deacon@arm.com>
-
- 05 5月, 2014 4 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.samba.org/jlayton/linux由 Linus Torvalds 提交于
Pull file locking change from Jeff Layton: "Only an email address change to the MAINTAINERS file" * tag 'locks-v3.15-3' of git://git.samba.org/jlayton/linux: MAINTAINERS: email address change for Jeff Layton
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 fixes from Catalin Marinas: "These are mostly arm64 fixes with an additional arm(64) platform fix for the initialisation of vexpress clocks (the latter only affecting arm64; the arch/arm64 code is SoC agnostic and does not rely on early SoC-specific calls) - vexpress platform clocks initialisation moved earlier following the arm64 move of of_clk_init() call in a previous commit - Default DMA ops changed to non-coherent to preserve compatibility with 32-bit ARM DT files. The "dma-coherent" property can be used to explicitly mark a device coherent. The Applied Micro DT file has been updated to avoid DMA cache maintenance for the X-Gene SATA controller (the only arm64 related driver with such assumption in -rc mainline) - Fixmap correction for earlyprintk - kern_addr_valid() fix for huge pages" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: vexpress: Initialise the sysregs before setting up the clocks arm64: Mark the Applied Micro X-Gene SATA controller as DMA coherent arm64: Use bus notifiers to set per-device coherent DMA ops arm64: Make default dma_ops to be noncoherent arm64: fixmap: fix missing sub-page offset for earlyprintk arm64: Fix for the arm64 kern_addr_valid() function
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "This is two patches both fixing bugs in drivers (virtio-scsi and mpt2sas) causing an oops in certain circumstances" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] virtio-scsi: Skip setting affinity on uninitialized vq [SCSI] mpt2sas: Don't disable device twice at suspend.
-
- 04 5月, 2014 6 次提交
-
-
由 Catalin Marinas 提交于
Following arm64 commit bc3ee18a (arm64: init: Move of_clk_init to time_init()), vexpress_osc_of_setup() is called via of_clk_init() long before initcalls are issued. Initialising the vexpress oscillators requires the vespress sysregs to be already initialised, so this patch adds an explicit call to vexpress_sysreg_of_early_init() in vexpress oscillator setup function. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Tested-by: NWill Deacon <will.deacon@arm.com> Acked-by: NWill Deacon <will.deacon@arm.com> Tested-by: NPawel Moll <pawel.moll@arm.com> Acked-by: NPawel Moll <pawel.moll@arm.com> Cc: Mike Turquette <mturquette@linaro.org>
-
由 Catalin Marinas 提交于
Since the default DMA ops for arm64 are non-coherent, mark the X-Gene controller explicitly as dma-coherent to avoid additional cache maintenance. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Cc: Loc Ho <lho@apm.com>
-
由 Catalin Marinas 提交于
Recently, the default DMA ops have been changed to non-coherent for alignment with 32-bit ARM platforms (and DT files). This patch adds bus notifiers to be able to set the coherent DMA ops (with no cache maintenance) for devices explicitly marked as coherent via the "dma-coherent" DT property. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Ritesh Harjani 提交于
Currently arm64 dma_ops is by default made coherent which makes it opposite in default policy from arm. Make default dma_ops to be noncoherent (same as arm), as currently there aren't any dma-capable drivers which assumes coherent ops Signed-off-by: NRitesh Harjani <ritesh.harjani@gmail.com> Acked-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Marc Zyngier 提交于
Commit d57c33c5 (add generic fixmap.h) added (among other similar things) set_fixmap_io to deal with early ioremap of devices. More recently, commit bf4b558e (arm64: add early_ioremap support) converted the arm64 earlyprintk to use set_fixmap_io. A side effect of this conversion is that my virtual machines have stopped booting when I pass "earlyprintk=uart8250-8bit,0x3f8" to the guest kernel. Turns out that the new earlyprintk code doesn't care at all about sub-page offsets, and just assumes that the earlyprintk device will be page-aligned. Obviously, that doesn't play well with the above example. Further investigation shows that set_fixmap_io uses __set_fixmap instead of __set_fixmap_offset. A fix is to introduce a set_fixmap_offset_io that uses the latter, and to remove the superflous call to fix_to_virt (which only returns the value that set_fixmap_io has already given us). With this applied, my VMs are back in business. Tested on a Cortex-A57 platform with kvmtool as platform emulation. Cc: Will Deacon <will.deacon@arm.com> Acked-by: NMark Salter <msalter@redhat.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Dave Anderson 提交于
Fix for the arm64 kern_addr_valid() function to recognize virtual addresses in the kernel logical memory map. The function fails as written because it does not check whether the addresses in that region are mapped at the pmd level to 2MB or 512MB pages, continues the page table walk to the pte level, and issues a garbage value to pfn_valid(). Tested on 4K-page and 64K-page kernels. Signed-off-by: NDave Anderson <anderson@redhat.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 03 5月, 2014 13 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq fixes from Thomas Gleixner: "This udpate delivers: - A fix for dynamic interrupt allocation on x86 which is required to exclude the GSI interrupts from the dynamic allocatable range. This was detected with the newfangled tablet SoCs which have GPIOs and therefor allocate a range of interrupts. The MSI allocations already excluded the GSI range, so we never noticed before. - The last missing set_irq_affinity() repair, which was delayed due to testing issues - A few bug fixes for the armada SoC interrupt controller - A memory allocation fix for the TI crossbar interrupt controller - A trivial kernel-doc warning fix" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: irq-crossbar: Not allocating enough memory irqchip: armanda: Sanitize set_irq_affinity() genirq: x86: Ensure that dynamic irq allocation does not conflict linux/interrupt.h: fix new kernel-doc warnings irqchip: armada-370-xp: Fix releasing of MSIs irqchip: armada-370-xp: implement the ->check_device() msi_chip operation irqchip: armada-370-xp: fix invalid cast of signed value into unsigned variable
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer fixes from Thomas Gleixner: "This update brings along: - Two fixes for long standing bugs in the hrtimer code, one which prevents remote enqueuing and the other preventing arbitrary delays after a interrupt hang was detected - A fix in the timer wheel which prevents math overflow - A fix for a long standing issue with the architected ARM timer related to the C3STOP mechanism. - A trivial compile fix for nspire SoC clocksource" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timer: Prevent overflow in apply_slack hrtimer: Prevent remote enqueue of leftmost timers hrtimer: Prevent all reprogramming if hang detected clocksource: nspire: Fix compiler warning clocksource: arch_arm_timer: Fix age-old arch timer C3STOP detection issue
-
由 Linus Torvalds 提交于
Merge tag 'trace-fixes-v3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "This is a small fix where the trigger code used the wrong rcu_dereference(). It required rcu_dereference_sched() instead of the normal rcu_dereference(). It produces a nasty RCU lockdep splat due to the incorrect rcu notation" Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> * tag 'trace-fixes-v3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Use rcu_dereference_sched() for trace event triggers
-
由 Steven Rostedt (Red Hat) 提交于
As trace event triggers are now part of the mainline kernel, I added my trace event trigger tests to my test suite I run on all my kernels. Now these tests get run under different config options, and one of those options is CONFIG_PROVE_RCU, which checks under lockdep that the rcu locking primitives are being used correctly. This triggered the following splat: =============================== [ INFO: suspicious RCU usage. ] 3.15.0-rc2-test+ #11 Not tainted ------------------------------- kernel/trace/trace_events_trigger.c:80 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 4 locks held by swapper/1/0: #0: ((&(&j_cdbs->work)->timer)){..-...}, at: [<ffffffff8104d2cc>] call_timer_fn+0x5/0x1be #1: (&(&pool->lock)->rlock){-.-...}, at: [<ffffffff81059856>] __queue_work+0x140/0x283 #2: (&p->pi_lock){-.-.-.}, at: [<ffffffff8106e961>] try_to_wake_up+0x2e/0x1e8 #3: (&rq->lock){-.-.-.}, at: [<ffffffff8106ead3>] try_to_wake_up+0x1a0/0x1e8 stack backtrace: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.15.0-rc2-test+ #11 Hardware name: /DG965MQ, BIOS MQ96510J.86A.0372.2006.0605.1717 06/05/2006 0000000000000001 ffff88007e083b98 ffffffff819f53a5 0000000000000006 ffff88007b0942c0 ffff88007e083bc8 ffffffff81081307 ffff88007ad96d20 0000000000000000 ffff88007af2d840 ffff88007b2e701c ffff88007e083c18 Call Trace: <IRQ> [<ffffffff819f53a5>] dump_stack+0x4f/0x7c [<ffffffff81081307>] lockdep_rcu_suspicious+0x107/0x110 [<ffffffff810ee51c>] event_triggers_call+0x99/0x108 [<ffffffff810e8174>] ftrace_event_buffer_commit+0x42/0xa4 [<ffffffff8106aadc>] ftrace_raw_event_sched_wakeup_template+0x71/0x7c [<ffffffff8106bcbf>] ttwu_do_wakeup+0x7f/0xff [<ffffffff8106bd9b>] ttwu_do_activate.constprop.126+0x5c/0x61 [<ffffffff8106eadf>] try_to_wake_up+0x1ac/0x1e8 [<ffffffff8106eb77>] wake_up_process+0x36/0x3b [<ffffffff810575cc>] wake_up_worker+0x24/0x26 [<ffffffff810578bc>] insert_work+0x5c/0x65 [<ffffffff81059982>] __queue_work+0x26c/0x283 [<ffffffff81059999>] ? __queue_work+0x283/0x283 [<ffffffff810599b7>] delayed_work_timer_fn+0x1e/0x20 [<ffffffff8104d3a6>] call_timer_fn+0xdf/0x1be^M [<ffffffff8104d2cc>] ? call_timer_fn+0x5/0x1be [<ffffffff81059999>] ? __queue_work+0x283/0x283 [<ffffffff8104d823>] run_timer_softirq+0x1a4/0x22f^M [<ffffffff8104696d>] __do_softirq+0x17b/0x31b^M [<ffffffff81046d03>] irq_exit+0x42/0x97 [<ffffffff81a08db6>] smp_apic_timer_interrupt+0x37/0x44 [<ffffffff81a07a2f>] apic_timer_interrupt+0x6f/0x80 <EOI> [<ffffffff8100a5d8>] ? default_idle+0x21/0x32 [<ffffffff8100a5d6>] ? default_idle+0x1f/0x32 [<ffffffff8100ac10>] arch_cpu_idle+0xf/0x11 [<ffffffff8107b3a4>] cpu_startup_entry+0x1a3/0x213 [<ffffffff8102a23c>] start_secondary+0x212/0x219 The cause is that the triggers are protected by rcu_read_lock_sched() but the data is dereferenced with rcu_dereference() which expects it to be protected with rcu_read_lock(). The proper reference should be rcu_dereference_sched(). Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: stable@vger.kernel.org # 3.14+ Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull ACPI and power management fixes from Rafael Wysocki: "A bunch of regression fixes this time. They fix two regressions in the PNP subsystem, one in the ACPI processor driver and one in the ACPI EC driver, four cpufreq driver regressions and an unrelated bug in one of the drivers. The regressions are recent or introduced in 3.14. Specifics: - There are two bugs in the ACPI PNP core that cause errors to be returned if optional ACPI methods are not present. After an ACPI core change made in 3.14 one of those errors leads to serial port suspend failures on some systems. Fix from Rafael J Wysocki. - A recently added PNP quirk related to Intel chipsets intorduced a build error in unusual configurations (PNP without PCI). Fix from Bjorn Helgaas. - An ACPI EC workaround related to system suspend on Samsung machines added in 3.14 introduced a race causing some valid EC events to be discarded. Fix from Kieran Clancy. - The acpi-cpufreq driver fails to load on some systems after a 3.14 commit related to APIC ID parsing that overlooked one corner case. Fix from Lan Tianyu. - Fix for a recently introduced build problem in the ppc-corenet cpufreq driver from Tim Gardner. - A recent cpufreq core change to ensure serialization of frequency transitions for drivers with a ->target_index() callback overlooked the fact that some of those drivers had been doing operations introduced by it into the core already by themselves. That resulted in a mess in which the core and the drivers try to do the same thing and block each other which leads to deadlocks. Fixes for the powernow-k7, powernow-k6, and longhaul cpufreq drivers from Srivatsa S Bhat. - Fix for a computational error in the powernow-k6 cpufreq driver from Srivatsa S Bhat" * tag 'pm+acpi-3.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / processor: Fix failure of loading acpi-cpufreq driver PNP / ACPI: Do not return errors if _DIS or _SRS are not present PNP: Fix compile error in quirks.c ACPI / EC: Process rather than discard events in acpi_ec_clear cpufreq: ppc-corenet-cpufreq: Fix __udivdi3 modpost error cpufreq: powernow-k7: Fix double invocation of cpufreq_freq_transition_begin/end cpufreq: powernow-k6: Fix double invocation of cpufreq_freq_transition_begin/end cpufreq: powernow-k6: Fix incorrect comparison with max_multipler cpufreq: longhaul: Fix double invocation of cpufreq_freq_transition_begin/end
-
git://git.secretlab.ca/git/linux由 Linus Torvalds 提交于
Pull driver core deferred probe fix from Grant Likely: "Drivercore race condition fix (exposed by devicetree) This branch fixes a bug where a device can get stuck in the deferred list even though all its dependencies are met. The bug has existed for a long time, but new platform conversions to device tree have exposed it. This patch is needed to get those platforms working. This was the pending bug fix I mentioned in my previous pull request. Normally this would go through Greg's tree seeing that it is a drivercore change, but devicetree exposes the problem. I've discussed with Greg and he okayed me asking you to pull directly" * tag 'dt-for-linus' of git://git.secretlab.ca/git/linux: drivercore: deferral race condition fix
-
由 Rafael J. Wysocki 提交于
* acpi-ec: ACPI / EC: Process rather than discard events in acpi_ec_clear * acpi-processor: ACPI / processor: Fix failure of loading acpi-cpufreq driver
-
由 Rafael J. Wysocki 提交于
* pnp: PNP / ACPI: Do not return errors if _DIS or _SRS are not present PNP: Fix compile error in quirks.c
-
由 Rafael J. Wysocki 提交于
* pm-cpufreq: cpufreq: ppc-corenet-cpufreq: Fix __udivdi3 modpost error cpufreq: powernow-k7: Fix double invocation of cpufreq_freq_transition_begin/end cpufreq: powernow-k6: Fix double invocation of cpufreq_freq_transition_begin/end cpufreq: powernow-k6: Fix incorrect comparison with max_multipler cpufreq: longhaul: Fix double invocation of cpufreq_freq_transition_begin/end
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm由 Linus Torvalds 提交于
Pull device mapper fixes from Mike Snitzer: "A few dm-thinp fixes for changes merged in 3.15-rc1. A dm-verity fix for an immutable biovec regression that affects 3.14+. A dm-cache fix to properly quiesce when using writethrough mode (3.14+)" * tag 'dm-3.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm cache: fix writethrough mode quiescing in cache_map dm thin: use INIT_WORK_ONSTACK in noflush_work to avoid ODEBUG warning dm verity: fix biovecs hash calculation regression dm thin: fix rcu_read_lock being held in code that can sleep dm thin: irqsave must always be used with the pool->lock spinlock
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Peter Anvin: "Two very small changes: one fix for the vSMP Foundation platform, and one to help LLVM not choke on options it doesn't understand (although it probably should)" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/vsmp: Fix irq routing x86: LLVMLinux: Wrap -mno-80387 with cc-option
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM fixes from Paolo Bonzini: - Fix for a Haswell regression in nested virtualization, introduced during the merge window. - A fix from Oleg to async page faults. - A bunch of small ARM changes. - A trivial patch to use the new MSI-X API introduced during the merge window. * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: ARM: vgic: Fix the overlap check action about setting the GICD & GICC base address. KVM: arm/arm64: vgic: fix GICD_ICFGR register accesses KVM: async_pf: mm->mm_users can not pin apf->mm KVM: ARM: vgic: Fix sgi dispatch problem MAINTAINERS: co-maintainance of KVM/{arm,arm64} arm: KVM: fix possible misalignment of PGDs and bounce page KVM: x86: Check for host supported fields in shadow vmcs kvm: Use pci_enable_msix_exact() instead of pci_enable_msix() ARM: KVM: disable KVM in Kconfig on big-endian systems
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
Pull s390 fixes from Martin Schwidefsky: "Two bug fixes, one to fix a potential information leak in the BPF jit and common-io-layer fix for old firmware levels" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/bpf,jit: initialize A register if 1st insn is BPF_S_LDX_B_MSH s390/chsc: fix SEI usage on old FW levels
-
- 02 5月, 2014 9 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
Pull infiniband/rdma fixes from Roland Dreier: "cxgb4 hardware driver fixes" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/cxgb4: Update Kconfig to include Chelsio T5 adapter RDMA/cxgb4: Only allow kernel db ringing for T4 devs RDMA/cxgb4: Force T5 connections to use TAHOE congestion control RDMA/cxgb4: Fix endpoint mutex deadlocks
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux由 Linus Torvalds 提交于
Pull parisc fixes from Helge Deller: "Drop the architecture-specifc value for_STK_LIM_MAX to fix stack related problems with GNU make" * 'parisc-3.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Use generic uapi/asm/resource.h file parisc: remove _STK_LIM_MAX override
-
由 Mike Snitzer 提交于
Commit 2ee57d58 ("dm cache: add passthrough mode") inadvertently removed the deferred set reference that was taken in cache_map()'s writethrough mode support. Restore taking this reference. This issue was found with code inspection. Signed-off-by: NMike Snitzer <snitzer@redhat.com> Acked-by: NJoe Thornber <ejt@redhat.com> Cc: stable@vger.kernel.org # 3.13+
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl由 Linus Torvalds 提交于
Pull pin control fixes from Linus Walleij: "Here is a small set of pin control fixes for the v3.15 series. All are individual driver fixes and quite self-contained. One of them tagged for stable. - Signedness bug in the TB10x - GPIO inversion fix for the AS3722 - Clear pending pin interrups enabled in the bootloader in the pinctrl-single driver - Minor pin definition fixes for the PFC/Renesas driver" * tag 'pinctrl-v3.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: sh-pfc: r8a7791: Fix definition of MOD_SEL3 sh-pfc: r8a7790: Fix definition of IPSR5 pinctrl: single: Clear pin interrupts enabled by bootloader pinctrl: as3722: fix handling of GPIO invert bit pinctrl/TB10x: Fix signedness bug
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux由 Linus Torvalds 提交于
Pull module fixes from Rusty Russell: "Fixed one missing place for the new taint flag, and remove a warning giving only false positives (now we finally figured out why)" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: module: remove warning about waiting module removal. Fix: tracing: use 'E' instead of 'X' for unsigned module taint flag
-
由 Helge Deller 提交于
Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 John David Anglin 提交于
There are only a couple of architectures that override _STK_LIM_MAX to a non-infinity value. This changes the stack allocation semantics in subtle ways. For example, GNU make changes its stack allocation to the hard maximum defined by _STK_LIM_MAX. As a results, threads executed by processes running under make are allocated a stack size of _STK_LIM_MAX rather than a sensible default value. This causes various thread stress tests to fail when they can't muster more than about 50 threads. The attached change implements the default behavior used by the majority of architectures. Signed-off-by: NJohn David Anglin <dave.anglin@bell.net> Reviewed-by: NCarlos O'Donell <carlos@systemhalted.org> Cc: stable@vger.kernel.org # 3.14 Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Vineet Gupta 提交于
Commit 93ea02bb ("arch: Clean up asm/barrier.h implementations") wired generic barrier.h for hexagon, but failed to delete the existing file. Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: NVineet Gupta <vgupta@synopsys.com> Compile-tested-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar: "Mostly tooling fixes, plus an Intel RAPL PMU driver fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tests x86: Fix stack map lookup in dwarf unwind test perf x86: Fix perf to use non-executable stack, again perf tools: Remove extra '/' character in events file path perf machine: Search for modules in %s/lib/modules/%s perf tests: Add static build make test perf tools: Fix bfd dependency libraries detection perf tools: Use LDFLAGS instead of ALL_LDFLAGS perf/x86: Fix RAPL rdmsrl_safe() usage tools lib traceevent: Fix memory leak in pretty_print() tools lib traceevent: Fix backward compatibility macros for pevent filter enums perf tools: Disable libdw unwind for all but x86 arch perf tests x86: Fix memory leak in sample_ustack()
-
- 01 5月, 2014 2 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging由 Linus Torvalds 提交于
Pull hwmon fix from Guenter Roeck: "Fix Tjmax detection in coretemp driver" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: Revert "hwmon: (coretemp) Refine TjMax detection"
-
由 H. Peter Anvin 提交于
This is simpler and cleaner. Depending on architecture, a smart compiler may or may not generate the same code. Acked-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-