c4iw_uld_add() must return ERR_PTR() values instead of NULL on failure.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Concurrent ingress CLOSE and ULP ABORT operations causes a crash due
to a race condition where the close path releases the EP lock and then
tries to move the QP state to CLOSED.  This must be done inside the EP
lock to avoid the race.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

- Show whether the SQ is in onchip memory or not.
- Dump both SQ and RQ QIDs.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

This at least kicks the user mode applications that are watching for
device events.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Set the ULP mode for initial RDMA connection setup to the proper DDP
mode.  This avoids wasting some HW resources while in streaming mode.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

This avoids the CIDX_INC overflow issue with T4A2 when running
kernel RDMA applications.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Unloading iw_cxgb4 can crash due to the unload code trying to use
db_drop_task, which is uninitialized.  So remove this dead code.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Set the default to on.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The idea here is this minimizes the number of places one has to edit
in order to make changes to how flows are defined and used.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Instead of on the stack.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This boolean state is now available in the flow flags.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since that is what the current vague "flags" argument means.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The PF passed to FW was 0, causing PCI failures in an SR-IOV environment.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Cc: <stable@kernel.org>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

MAXBURST cannot exceed 256B for on-chip queues.  With a 512B MAXBURST,
we can lock up the chip.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Cc: <stable@kernel.org>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Re-initializing the wait object in rdma_init()/rdma_fini() causes a
timing window which can lead to a deadlock during close.  Once this
deadlock hits, all RDMA activity over the T4 device will be stuck.

There's no need to re-init the wait object, so remove it.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Cc: <stable@kernel.org>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

This removes unused code found by running 'make namespacecheck';
compile tested only.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Acked-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Only include the header linux/mutex.h once inside
drivers/infiniband/hw/cxgb4/iw_cxgb4.h
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Signed-off-by: Nmatt mooney <mfm@muteddisk.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Remove the local service t4_pktgl_to_skb() and use cxgb4_pktgl_to_skb()
exported by cxgb4.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

The patch below updates broken web addresses in the kernel
Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Finn Thain <fthain@telegraphics.com.au>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Dimitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Mike Frysinger <vapier.adi@gmail.com>
Acked-by: NBen Pfaff <blp@cs.stanford.edu>
Acked-by: NHans J. Koch <hjk@linutronix.de>
Reviewed-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

We can replace our equivalent open-coded version.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Incorporate BKL removal changes.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

- Remove dsgl support - doesn't work in T4.
- Wrap the immediate PBL as needed when building it in the wr.
- Adjust max pbl depth allowed based on ulptx alignment requirements.
- Bump the slots per SQ to 5 to allow up to 128MB fast registers.
- Advertise fastreg support by default.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

This helps with large IO throughput.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Move the connection setup/teardown paths to the workq thread removing
spin lock/irq disable requirements for these paths.  This allows calls
down to the LLD for EP and QP state transition actions to be atomic
with respect to processing CPL messages coming up from the HW.
Namely, calls to rdma_init() and rdma_fini() can now be called with
the mutex held avoiding many race conditions with the abort path.

The QP spinlock is still used but only to manipulate the qp state.  This
allows the fastpaths, poll, post_send, and pos_recv, to run in the
irq context.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

T4 support on-chip SQs to reduce latency.  This patch adds support for
this in iw_cxgb4:

 - Manage ocqp memory like other adapter mem resources.
 - Allocate user mode SQs from ocqp mem if available.
 - Map ocqp mem to user process using write combining.
 - Map PCIE_MA_SYNC reg to user process.

Bump uverbs ABI.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Add "stags" debugfs file.  This is useful for examining the TPTE and
PBL entries in adapter memory.  It allows scripts to dump just the
active entries.

Also clean up the "qps" file handlers and shared common code.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

This helps debug cases where HW resources are depleted.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

T4 FW sends up CPL_RDMA_TERMINATE to indicate a peer TERM.  This
triggers the QP moving to TERMINATE state.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

T4 incorrectly inserts TERM CQEs into the CQ.  Silently ignore them.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

The cxgb4_*_send() functions return NET_XMIT_ values, which are
positive integers or negative errno values.  So don't treat positive
return values as an error.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

The HW design requires zeroing any pad in SGLs.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

In c4iw_modify_qp() error path, only use qhp->ep if ep is not already set.
Otherwise qhp->ep can be NULL and we crash.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Fix:

  drivers/infiniband/hw/cxgb4/qp.c: In function ‘create_qp’:
  drivers/infiniband/hw/cxgb4/qp.c:147: warning: cast from pointer to integer of different size
  drivers/infiniband/hw/cxgb4/qp.c: In function ‘rdma_fini’:
  drivers/infiniband/hw/cxgb4/qp.c:988: warning: cast from pointer to integer of different size
  drivers/infiniband/hw/cxgb4/qp.c: In function ‘rdma_init’:
  drivers/infiniband/hw/cxgb4/qp.c:1063: warning: cast from pointer to integer of different size
  drivers/infiniband/hw/cxgb4/mem.c: In function ‘write_adapter_mem’:
  drivers/infiniband/hw/cxgb4/mem.c:74: warning: cast from pointer to integer of different size
  drivers/infiniband/hw/cxgb4/cq.c: In function ‘destroy_cq’:
  drivers/infiniband/hw/cxgb4/cq.c:58: warning: cast from pointer to integer of different size
  drivers/infiniband/hw/cxgb4/cq.c: In function ‘create_cq’:
  drivers/infiniband/hw/cxgb4/cq.c:135: warning: cast from pointer to integer of different size
  drivers/infiniband/hw/cxgb4/cm.c: In function ‘fw6_msg’:
  drivers/infiniband/hw/cxgb4/cm.c:2326: warning: cast to pointer from integer of different size

by casting pointers to unsigned long instead of u64.
Reported-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>