Provide a function which returns whether a transaction with given tid
will send a flush to the filesystem device.  The function will be used
by ext4 to detect whether fsync needs to send a separate flush or not.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

In data=ordered mode, it's theoretically possible (however rare) that
an inode is filed to transaction's t_inode_list and a flusher thread
writes all the data and inode is reclaimed before the transaction
starts to commit.  In such a case, we could erroneously omit sending a
flush to file system device when it is different from the journal
device (because data can still be in disk cache only).

Fix the problem by setting a flag in a transaction when some inode is added
to it and then send disk flush in the commit code when the flag is set.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

In do_get_write_access() we wait on BH_Unshadow bit for buffer to get
from shadow state. The waking code in journal_commit_transaction() has
a bug because it does not issue a memory barrier after the buffer is
moved from the shadow state and before wake_up_bit() is called. Thus a
waitqueue check can happen before the buffer is actually moved from
the shadow state and waiting process may never be woken. Fix the
problem by issuing proper barrier.
Reported-by: NTao Ma <boyu.mt@taobao.com>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

There is potential memory leak of journal head in function
jbd2_journal_commit_transaction. The problem is that JBD2 will not
reclaim the journal head of commit record if error occurs or journal
is abotred.

I use the following script to reproduce this issue, on a RHEL6
system. I found it very easy to reproduce with async commit enabled.

mount /dev/sdb /mnt -o journal_checksum,journal_async_commit
touch /mnt/xxx
echo offline > /sys/block/sdb/device/state
sync
umount /mnt
rmmod ext4
rmmod jbd2

Removal of the jbd2 module will make slab complaining that
"cache `jbd2_journal_head': can't free all objects".
Signed-off-by: NZhang Huan <zhhuan@gmail.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>

'write_op' was still used, even though it was always WRITE_SYNC now.
Add plugging around the cases where it submits IO, and flush them
before we end up waiting for that IO.
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

With the plugging now being explicitly controlled by the
submitter, callers need not pass down unplugging hints
to the block layer. If they want to unplug, it's because they
manually plugged on their own - in which case, they should just
unplug at will.
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

This fixes a hang seen in jbd2_journal_release_jbd_inode
on a lot of Power 6 systems running with ext4. When we get
in the hung state, all I/O to the disk in question gets blocked
where we stay indefinitely. Looking at the task list, I can see
we are stuck in jbd2_journal_release_jbd_inode waiting on a
wake up. I added some debug code to detect this scenario and
dump additional data if we were stuck in jbd2_journal_release_jbd_inode
for longer than 30 minutes. When it hit, I was able to see that
i_flags was 0, suggesting we missed the wake up.

This patch changes i_flags to be an unsigned long, uses bit operators
to access it, and adds barriers around the accesses. Prior to applying
this patch, we were regularly hitting this hang on numerous systems
in our test environment. After applying the patch, the hangs no longer
occur.
Signed-off-by: NBrian King <brking@linux.vnet.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Fsync performance for small files achieved by cfq on high-end disks is
lower than what deadline can achieve, due to idling introduced between
the sync write happening in process context and the journal commit.

Moreover, when competing with a sequential reader, a process writing
small files and fsync-ing them is starved.

This patch fixes the two problems by:
- marking journal commits as WRITE_SYNC, so that they get the REQ_NOIDLE
  flag set,
- force all queues that have REQ_NOIDLE requests to be put in the noidle
  tree.

Having the queue associated to the fsync-ing process and the one associated
 to journal commits in the noidle tree allows:
- switching between them without idling,
- fairness vs. competing idling queues, since they will be serviced only
  after the noidle tree expires its slice.
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Reviewed-by: NJeff Moyer <jmoyer@redhat.com>
Tested-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NCorrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

All the blkdev_issue_* helpers can only sanely be used for synchronous
caller.  To issue cache flushes or barriers asynchronously the caller needs
to set up a bio by itself with a completion callback to move the asynchronous
state machine ahead.  So drop the BLKDEV_IFL_WAIT flag that is always
specified when calling blkdev_issue_* and also remove the now unused flags
argument to blkdev_issue_flush and blkdev_issue_zeroout.  For
blkdev_issue_discard we need to keep it for the secure discard flag, which
gains a more descriptive name and loses the bitops vs flag confusion.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Switch to the WRITE_FLUSH_FUA flag for journal commits and remove the
EOPNOTSUPP detection for barriers.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Currently JBD2 relies blkdev_issue_flush() draining the queue when ASYNC_COMMIT
feature is set. This property is going away so make JBD2 wait for buffers it
needs on its own before submitting the cache flush.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Instead of abusing a buffer_head flag just add a variant of
sync_dirty_buffer which allows passing the exact type of write
flag required.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This should remove the last exclusive lock from start_this_handle(),
so that we should now be able to start multiple transactions at the
same time on large SMP systems.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Lockstat reports have shown that j_state_lock is a major source of
lock contention, especially on systems with more than 4 CPU cores.  So
change it to be a read/write spinlock.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

By using an atomic_t for t_updates and t_outstanding credits, this
should allow us to not need to take transaction t_handle_lock in
jbd2_journal_stop().
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Saying things like "sync failed" when a device does
not support barriers makes users slightly more worried than
they need to be; rather than talking about sync failures,
let's just state the barrier-based facts.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

The patch just convert all blkdev_issue_xxx function to common
set of flags. Wait/allocation semantics preserved.
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

commit_transaction has the same value as journal->j_running_transaction,
so we can simplify the assert statement.
Signed-off-by: Ndingdinghua <dingdinghua@nrchpc.ac.cn>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Delay discarding buffers in journal_unmap_buffer until
we know that "add to orphan" operation has definitely been
committed, otherwise the log space of committing transation
may be freed and reused before truncate get committed, updates
may get lost if crash happens.
Signed-off-by: Ndingdinghua <dingdinghua@nrchpc.ac.cn>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This is a bit complicated because we are trying to optimize when we
send barriers to the fs data disk.  We could just throw in an extra
barrier to the data disk whenever we send a barrier to the journal
disk, but that's not always strictly necessary.

We only need to send a barrier during a commit when there are data
blocks which are must be written out due to an inode written in
ordered mode, or if fsync() depends on the commit to force data blocks
to disk.  Finally, before we drop transactions from the beginning of
the journal during a checkpoint operation, we need to guarantee that
any blocks that were flushed out to the data disk are firmly on the
rust platter before we drop the transaction from the journal.

Thanks to Oleg Drokin for pointing out this flaw in ext3/ext4.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

All callers really want the more logical filemap_fdatawait_range interface,
so convert them to use it and merge wait_on_page_writeback_range into
filemap_fdatawait_range.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>

OOM happens.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

The /proc/fs/jbd2/<dev>/history was maintained manually; by using
tracepoints, we can get all of the existing functionality of the /proc
file plus extra capabilities thanks to the ftrace infrastructure.  We
save memory as a bonus.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

It's only set, it's never checked. Kill it.
Acked-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Previously the journal_async_commit mount option was equivalent to
using barrier=0 (and just as unsafe).  This patch fixes it so that we
eliminate the barrier before the commit block (by not using ordered
mode), and explicitly issuing an empty barrier bio after writing the
commit block.  Because of the journal checksum, it is safe to do this;
if the journal blocks are not all written before a power failure, the
checksum in the commit block will prevent the last transaction from
being replayed.

Using the fs_mark benchmark, using journal_async_commit shows a 50%
improvement:

FSUse%        Count         Size    Files/sec     App Overhead
     8         1000        10240         30.5            28242

vs.

FSUse%        Count         Size    Files/sec     App Overhead
     8         1000        10240         45.8            28620
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

The revoke records must be written using the same way as the rest of
the blocks during the commit process; that is, either marked as
synchronous writes or as asynchornous writes.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

When you are going to be submitting several sync writes, we want to
give the IO scheduler a chance to merge some of them. Instead of
using the implicitly unplugging WRITE_SYNC variant, use WRITE_SYNC_PLUG
and rely on sync_buffer() doing the unplug when someone does a
wait_on_buffer()/lock_buffer().
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If a commit is triggered by fsync(), set a flag indicating the journal
blocks associated with the transaction should be flushed out using
WRITE_SYNC.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Filesystems often to do compute intensive operation on some
metadata.  If this operation is repeated many times, it can be very
expensive.  It would be much nicer if the operation could be performed
once before a buffer goes to disk.

This adds triggers to jbd2 buffer heads.  Just before writing a metadata
buffer to the journal, jbd2 will optionally call a commit trigger associated
with the buffer.  If the journal is aborted, an abort trigger will be
called on any dirty buffers as they are dropped from pending
transactions.

ocfs2 will use this feature.

Initially I tried to come up with a more generic trigger that could be
used for non-buffer-related events like transaction completion.  It
doesn't tie nicely, because the information a buffer trigger needs
(specific to a journal_head) isn't the same as what a transaction
trigger needs (specific to a tranaction_t or perhaps journal_t).  So I
implemented a buffer set, with the understanding that
journal/transaction wide triggers should be implemented separately.

There is only one trigger set allowed per buffer.  I can't think of any
reason to attach more than one set.  Contrast this with a journal or
transaction in which multiple places may want to watch the entire
transaction separately.

The trigger sets are considered static allocation from the jbd2
perspective.  ocfs2 will just have one trigger set per block type,
setting the same set on every bh of the same type.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

Since we will be waiting the write of the commit record to the journal
to complete in journal_submit_commit_record(), submit it using
WRITE_SYNC.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Avoid freeing the transaction in __jbd2_journal_drop_transaction() so
the journal commit callback can run without holding j_list_lock, to
avoid lock contention on this spinlock.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This patch removes the static sleep time in favor of a more self
optimizing approach where we measure the average amount of time it
takes to commit a transaction to disk and the ammount of time a
transaction has been running.  If somebody does a sync write or an
fsync() traditionally we would sleep for 1 jiffies, which depending on
the value of HZ could be a significant amount of time compared to how
long it takes to commit a transaction to the underlying storage.  With
this patch instead of sleeping for a jiffie, we check to see if the
amount of time this transaction has been running is less than the
average commit time, and if it is we sleep for the delta using
schedule_hrtimeout to give us a higher precision sleep time.  This
greatly benefits high end storage where you could end up sleeping for
longer than it takes to commit the transaction and therefore sitting
idle instead of allowing the transaction to be committed by keeping
the sleep time to a minimum so you are sure to always be doing
something.
Signed-off-by: NJosef Bacik <jbacik@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Xen doesn't report that barriers are not supported until buffer I/O is
reported as completed, instead of when the buffer I/O is submitted.
Add a check and a fallback codepath to journal_wait_on_commit_record()
to detect this case, so that attempts to mount ext4 filesystems on
LVM/devicemapper devices on Xen guests don't blow up with an "Aborting
journal on device XXX"; "Remounting filesystem read-only" error.

Thanks to Andreas Sundstrom for reporting this issue.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org

The transaction can potentially get dropped if there are no buffers
that need to be written.  Make sure we call the commit callback before
potentially deciding to drop the transaction.  Also avoid
dereferencing the commit_transaction pointer in the marker for the
same reason.

This patch fixes the bug reported by Eric Paris at:
http://bugzilla.kernel.org/show_bug.cgi?id=11838Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Acked-by: NEric Sandeen <sandeen@redhat.com>
Tested-by: NEric Paris <eparis@redhat.com>

The multiblock allocator needs to be able to release blocks (and issue
a blkdev discard request) when the transaction which freed those
blocks is committed.  Previously this was done via a polling mechanism
when blocks are allocated or freed.  A much better way of doing things
is to create a jbd2 callback function and attaching the list of blocks
to be freed directly to the transaction structure.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

If the journal doesn't abort when it gets an IO error in file data
blocks, the file data corruption will spread silently.  Because
most of applications and commands do buffered writes without fsync(),
they don't notice the IO error.  It's scary for mission critical
systems.  On the other hand, if the journal aborts whenever it gets
an IO error in file data blocks, the system will easily become
inoperable.  So this patch introduces a filesystem option to
determine whether it aborts the journal or just call printk() when
it gets an IO error in file data.

If you mount an ext4 fs with data_err=abort option, it aborts on file
data write error.  If you mount it with data_err=ignore, it doesn't
abort, just call printk().  data_err=ignore is the default.

Here is the corresponding patch of the ext3 version:
http://kerneltrap.org/mailarchive/linux-kernel/2008/9/9/3239374Signed-off-by: NHidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Currently, original metadata buffers are dirtied when they are
unfiled whether the journal has aborted or not.  Eventually these
buffers will be written-back to the filesystem by pdflush.  This
means some metadata buffers are written to the filesystem without
journaling if the journal aborts.  So if both journal abort and
system crash happen at the same time, the filesystem would become
inconsistent state.  Additionally, replaying journaled metadata
can overwrite the latest metadata on the filesystem partly.
Because, if the journal gets aborted, journaled metadata are
preserved and replayed during the next mount not to lose
uncheckpointed metadata.  This would also break the consistency
of the filesystem.

This patch prevents original metadata buffers from being dirtied
on abort by clearing BH_JBDDirty flag from those buffers.  Thus,
no metadata buffers are written to the filesystem without journaling.
Signed-off-by: NHidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

If we failed to write metadata buffers to the journal space and
succeeded to write the commit record, stale data can be written
back to the filesystem as metadata in the recovery phase.

To avoid this, when we failed to write out metadata buffers,
abort the journal before writing the commit record.

We can also avoid this kind of corruption by using the journal
checksum feature because it can detect invalid metadata blocks in the
journal and avoid them from being replayed.  So we don't need to care
about asynchronous commit record writeout with a checksum.
Signed-off-by: NHidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>