The vunmap() function performs also input parameter validation.
Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/a5a79711-10a3-e304-a897-892ebdf2ff9f@users.sourceforge.net

of_node_put needs to be called when the device node which is got
from of_parse_phandle has finished using.

Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NPeter Chen <peter.chen@nxp.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>

This patch adds support for ARM 64bit architecture with IOMMU-DMA glue
code, so Exynos DRM can be now used on Exynos 5433 with IOMMU enabled.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch moves all ARM 32bit DMA-mapping/IOMMU dependant code from
exynos_drm_iommu.c to .h, to let it compile conditionally and prepare
for adding support for other architectures/IOMMU glue code (like ARM
64bit with IOMMU-DMA glue). Later, when ARM 32bit and 64bit will be
unified, this code can be removed.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch removes unused entries from exynos_drm_private strcuture.
da_start/da_space_size were only used in drm_create_iommu_mapping()
function and never set to other value than the defaults. Instead use
default values directly in arm_iommu_create_mapping() call.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch adds a check if all devices belonging to Exynos DRM have the
same dma_map_ops set. This is required to enable operation with IOMMU
enabled.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Move code for managing DMA max segment size parameter to separate
functions. This patch also replaces devm_kzalloc() with kzalloc() and
adds proper kfree call. devm_kzalloc() cannot be used for dma_params
structure, because it will be freed on driver remove not on device
release. This means in case of Exynos DRM being compiled as module and
loaded 2 times, a user-after-free issue will happen.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Currently enabling Exynos DRM support automatically pulls in
lots of fbdev dependencies. However these deps are
unnecessary since DRM core already enables them when
needed.
Signed-off-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466769168-31602-1-git-send-email-tjakobi@math.uni-bielefeld.de

It's better to pass the connector to platform driver in .get_modes()
callback, just like what the .get_modes() helper function designed.
Signed-off-by: NYakir Yang <ykk@rock-chips.com>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Reviewed-by: NTomasz Figa <tomasz.figa@chromium.com>

We already have a fallback in place to fill out the unique from
dev->unique, which is set to something reasonable in drm_dev_alloc.

Which means we only need to have a special set_busid for pci devices,
to be able to care the backwards compat code for drm 1.1 around, which
libdrm still needs.

While developing and testing this patch things blew up in really
interesting ways, and the code is rather confusing in naming things
between the kernel code, ioctl #defines and libdrm. For the next brave
dragon slayer, document all this madness properly in the userspace
interface section of gpu.tmpl.

v2: Make drm_dev_set_unique static and update kerneldoc.

v3: Entire rewrite, plus document what's going on for posterity in the
gpu docbook uapi section.

v4: Drop accidental amdgpu hunk (Emil).

v5: Drop accidental omapdrm vblank counter change (Emil).

v6: Rebase on top of the sphinx conversion.

Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> (virt_gpu)
Reviewed-by: NEmil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

The current bitwise AND should result in the same assembler
but this is what the code is actually supposed to do.
Signed-off-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Neither of these files issue any fbdev related calls.
Signed-off-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This makes the defines consistent with the rest.
Signed-off-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Commit a6f75aa1 ("drm/exynos: fimd: add HW trigger support") added
hardware trigger support to the FIMD controller driver. But this broke
the display in at least the Exynos5800 Peach Pi Chromebook.

So until the issue is fixed, avoid using HW trigger for the Exynos5420
based boards and use SW trigger as it was before the mentioned commit.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The field value is only checked in fimd_setup_trigger() if .trg_type is
I80_HW_TRG so there's no point in setting this field for the s3c6400 if
is never going to be used since .trg_type is not set.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Commit 3424e3a4 ("drm: bridge: analogix/dp: split exynos dp driver to
bridge directory") split the Exynos DP core driver into a core driver and
a bridge driver for the Analogix chip since that is also used by Rockchip.

But the change introduced a regression causing a NULL pointer dereference
when trying to access an uninitialized connector in the driver .get_modes:

Fix this by instead of having a connector struct for both the Exynos and
Analogix drivers, just use the connector initialized in the bridge driver.

Fixes: 3424e3a4 ("drm: bridge: analogix/dp: split exynos dp driver to bridge directory")
Reported-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NYakir Yang <ykk@rock-chips.com>
Tested-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

We have 1:1 relationship between connectors and encoders and the driver
is relying on the atomic helpers: we can drop the custom ->best_encoder()
implementations and let the core call drm_atomic_helper_best_encoder()
for us.
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-5-git-send-email-boris.brezillon@free-electrons.com

- dev is redundant, we have state->atomic
- add stall parameter, which must be set when swapping needs to stall
  for preceeding commits to stop looking at ->state pointers. Currently
  all drivers need this to be, just prep work for a glorious future.

v2: Rebased on top of

commit e7cf0963
Author: Gerd Hoffmann <kraxel@redhat.com>
Date:   Tue May 31 08:50:47 2016 +0200

    virtio-gpu: add atomic_commit function

Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465509992-19284-1-git-send-email-daniel.vetter@ffwll.ch
Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-2-git-send-email-daniel.vetter@ffwll.ch

The current bitwise AND should result in the same assembler
but this is what the code is actually supposed to do.
Signed-off-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: NEric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1464179407-9004-1-git-send-email-tjakobi@math.uni-bielefeld.de

We want to hide drm_atomic_state internals better.

v2: Use drm_crtc_mask (Maarten).

Cc: Inki Dae <inki.dae@samsung.com>
Acked-by: NInki Dae <inki.dae@samsung.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1464818821-5736-8-git-send-email-daniel.vetter@ffwll.ch

This was added in

commit 0a3e67a4
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date:   Tue Sep 30 12:14:26 2008 -0700

    drm: Rework vblank-wait handling to allow interrupt reduction.

to stay backwards-compatible with old UMS code that didn't even tell
the kernel when it did a modeset, so that the kernel could
save/restore vblank counters. At worst this means vblanks will be
somewhat funky on a setup that very likely no one still runs.

So let's just nuke it.

Plan B would be to set it unconditionally in drm_vblank_init for kms
drivers, instead of in each driver separately. So if this patch breaks
anything please only restore the hunks in drmP.h and drm_irq.c, plus
add a check for DRIVER_MODESET in drm_vblank_init.

Stumbled over this in a discussion on irc with Chris.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NLiviu Dudau <Liviu.Dudau@arm.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Smatch warns that the if statement isn't indented.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160512195457.GA19095@mwanda

It's unused, and really this helper should only look at the state
structure and nothing else.

v2: Fix commit message (Laurent).

v3: Rebase onto mtk driver merge.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Mark Yao <mark.yao@rock-chips.com>
Acked-by: NThierry Reding <thierry.reding@gmail.com>
Acked-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1462804451-15318-2-git-send-email-daniel.vetter@ffwll.ch

drm_gem_object_lookup() has never required the drm_device for its file
local translation of the user handle to the GEM object. Let's remove the
unused parameter and save some space.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: dri-devel@lists.freedesktop.org
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
[danvet: Fixup kerneldoc too.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It seems trigger cannot be configured too early, otherwise it does not work in
case of panel. The patch fixes also trigger flag logic, previously HW-TRIGGER
flag was cleared in case of panel - as a result panel used always software
trigger.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This allows to remove the local of_graph_get_port_by_reg(),
of_graph_get_endpoint_by_reg(), and of_get_child_by_name_reg()
functions.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Reviewed-by: NInki Dae <inki.dae@samsung.com>

This allows to remove the local of_graph_get_port_by_reg(),
of_graph_get_endpoint_by_reg(), of_get_child_by_name_reg(),
and of_graph_get_remote_port_parent() functions.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

It's an optional hook. Might be needed for frontbuffer rendering on
manual upload displays, but a simple TODO doesn't explain at all what
needs to be done or why.

Cc: Inki Dae <inki.dae@samsung.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

There is no reason to be wapper functions to use DMA mapping APIs. Use
directly DMA mapping APIs and remove the wapper functions.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The regulators may not be available just because their driver's probe
function was just not executed and so the regulators not registered.

So, in this case the Exynos HDMI driver should not print logs since
a -EPROBE_DEFER is not really an error and that will just pollute
the kernel log and confuse users.

This patch prevents the following misleading messages to be printed:

[    1.443638] [drm:hdmi_probe] *ERROR* failed to get regulators
[    1.449326] [drm:hdmi_probe] *ERROR* hdmi_resources_init failed
Reported-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The imported dma-buf should be mapped by sub-system exporting it.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This allows exported dma-bufs to be mapped using gem_prime_mmap.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Don't use the vrefresh field of the DRM mode since this
one is supposed to only be used for debug purpose.
Instead use the clock field which should also provide
much more precise information.

Also sanitize the case in which the clock value
should be zero. We then just default to the maximum
clock divisor.
Signed-off-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Driver code did not remove event from the list of pending events before destroy.
As a result drm core later tried to inspect invalid memory location.
The patch replaces removal code with call to core helper.

The bug was detected using KASAN:

[   10.107249] ==================================================================
[   10.107518] BUG: KASAN: use-after-free in drm_release+0xe9c/0x1000 at addr ffffffc089154a18
[   10.107784] Read of size 8 by task modetest/103
[   10.107931] =============================================================================
[   10.113191] BUG kmalloc-128 (Not tainted): kasan: bad access detected
[   10.119608] -----------------------------------------------------------------------------
[   10.119608]
[   10.129243] Disabling lock debugging due to kernel taint
[   10.134551] INFO: Allocated in drm_mode_page_flip_ioctl+0x500/0xa98 age=4 cpu=0 pid=103
[   10.142532] 	alloc_debug_processing+0x18c/0x198
[   10.147043] 	___slab_alloc.constprop.28+0x360/0x380
[   10.151906] 	__slab_alloc.isra.25.constprop.27+0x54/0xa0
[   10.157197] 	kmem_cache_alloc_trace+0x370/0x3b0
[   10.161709] 	drm_mode_page_flip_ioctl+0x500/0xa98
[   10.166400] 	drm_ioctl+0x4c4/0xb68
[   10.169787] 	do_vfs_ioctl+0x16c/0xeb8
[   10.173429] 	SyS_ioctl+0x8c/0xa0
[   10.176642] 	el0_svc_naked+0x24/0x28
[   10.180204] INFO: Freed in exynos_drm_crtc_cancel_page_flip+0xe0/0x160 age=0 cpu=0 pid=103
[   10.188447] 	free_debug_processing+0x174/0x388
[   10.192871] 	__slab_free+0x2e8/0x438
[   10.196431] 	kfree+0x350/0x360
[   10.199469] 	exynos_drm_crtc_cancel_page_flip+0xe0/0x160
[   10.204762] 	exynos_drm_preclose+0x58/0xa0
[   10.208844] 	drm_release+0x1f0/0x1000
[   10.212491] 	__fput+0x1c4/0x5b8
[   10.215613] 	____fput+0xc/0x18
[   10.218654] 	task_work_run+0x130/0x198
[   10.222385] 	do_exit+0x700/0x2278
[   10.225681] 	do_group_exit+0xe4/0x2c8
[   10.229327] 	SyS_exit_group+0x1c/0x20
[   10.232973] 	el0_svc_naked+0x24/0x28
[   10.236532] INFO: Slab 0xffffffbdc2a45500 objects=32 used=10 fp=0xffffffc089154a00 flags=0x4080
[   10.245210] INFO: Object 0xffffffc089154a00 @offset=2560 fp=0xffffffc089157600
[   10.245210]
...
[   10.384532] CPU: 0 PID: 103 Comm: modetest Tainted: G    B           4.5.0-rc3-00748-gd5e2881 #271
[   10.398325] Call trace:
[   10.400764] [<ffffffc000091428>] dump_backtrace+0x0/0x328
[   10.406141] [<ffffffc000091764>] show_stack+0x14/0x20
[   10.411176] [<ffffffc00089c550>] dump_stack+0xb0/0xe8
[   10.416210] [<ffffffc000395778>] print_trailer+0xf8/0x160
[   10.421592] [<ffffffc00039b5cc>] object_err+0x3c/0x50
[   10.426626] [<ffffffc00039d630>] kasan_report_error+0x248/0x550
[   10.432527] [<ffffffc00039da50>] __asan_report_load8_noabort+0x40/0x48
[   10.439039] [<ffffffc000b5b724>] drm_release+0xe9c/0x1000
[   10.444419] [<ffffffc0003d340c>] __fput+0x1c4/0x5b8
[   10.449280] [<ffffffc0003d3884>] ____fput+0xc/0x18
[   10.454055] [<ffffffc000101aa8>] task_work_run+0x130/0x198
[   10.459522] [<ffffffc0000bc058>] do_exit+0x700/0x2278
[   10.464557] [<ffffffc0000bdcfc>] do_group_exit+0xe4/0x2c8
[   10.469939] [<ffffffc0000bdefc>] SyS_exit_group+0x1c/0x20
[   10.475320] [<ffffffc000087530>] el0_svc_naked+0x24/0x28
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Software trigger should not be used if hardware trigger is configured.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

vblank should be signaled to userspace after reading framebuffers not before,
signaling it in TE interrupt looks wrong. TE triggers reading framebuffers
so it is the worst moment. Tearing is not observable because hardware prevents
it, but there are frequently skipped vblank events.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

HDMI-PHY clock should be accessible from other components in the pipeline.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

No dev->struct_mutex anywhere to be seen.

Cc: Inki Dae <inki.dae@samsung.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Acked-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461691808-12414-18-git-send-email-daniel.vetter@ffwll.ch

The async name is deprecated and should be changed to nonblocking.

Cc: Inki Dae <inki.dae@samsung.com>
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461679905-30177-5-git-send-email-maarten.lankhorst@linux.intel.com

This patch removes suffixes from I80 relevant register definitions,
which are misleading.

This is based on top of below patch set,
     http://www.spinics.net/lists/dri-devel/msg104057.htmlSigned-off-by: NInki Dae <inki.dae@samsung.com>