Signed-off-by: NKelly Daly <kelly@au.ibm.com>

Signed-off-by: NKelly Daly <kelly@au.ibm.com>

Signed-off-by: NKelly Daly <kelly@au.ibm.com>

Signed-off-by: NKelly Daly <kelly@au.ibm.com>

Convert most of the remaining "Using plain integer as NULL pointer" sparse
warnings to use NULL.  (Not duplicating patches that are already in -mm,
-bird, or -kj.)

Convert isdn driver struct initializer to use C99 syntax.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Typo fix: dots appearing after a newline in printk strings.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Removed some more references to check_region().

I checked these changes into the 'checkreg' branch of
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6.git

The only valid references remaining are in:
drivers/scsi/advansys.c
drivers/scsi/BusLogic.c
drivers/cdrom/sbpcd.c
sound/oss/pss.c

  Remove last vestiges of ide_check_region()
  drivers/char/specialix: trim trailing whitespace
  drivers/char/specialix: eliminate use of check_region()
  Remove outdated and unused references to check_region()
  [sound oss] remove check_region() usage from cs4232, wavfront
  [netdrvr eepro] trim trailing whitespace
  [netdrvr eepro] remove check_region() usage
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

smsc-ircc2 - avoid closing network device when suspending; just release
interrupt and disable DMA ourselves.  Also make sure to reset chip when
resuming.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
Cc: Jean Tourrilhes <jt@bougret.hpl.hp.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Update SMC91x driver for m32r.

- Remove needless NONCACHE_OFFSET adjustment.
  > [PATCH 2.6.14-rc4] m32r: NONCACHE_OFFSET in _port2addr
  > Change _port2addr() not to add NONCACHE_OFFSET.
  > Adding NONCACHE_OFFSET requires needless address adjusting by a driver
  > using ioremap() like a SMC91x driver.

- Fix lots of warnings as following:
/usr/src/ctest/git/kernel/drivers/net/smc91x.c: In function `smc_reset':
/usr/src/ctest/git/kernel/drivers/net/smc91x.c:324: warning: passing arg 2 of `_outw' makes integer from pointer without a cast
/usr/src/ctest/git/kernel/drivers/net/smc91x.c:325: warning: passing arg 2 of `_outw' makes integer from pointer without a cast
/usr/src/ctest/git/kernel/drivers/net/smc91x.c:341: warning: passing arg 2 of `_outw' makes integer from pointer without a cast
/usr/src/ctest/git/kernel/drivers/net/smc91x.c:342: warning: passing arg 2 of `_outw' makes integer from pointer without a cast
  :
/usr/src/ctest/git/kernel/drivers/net/smc91x.c:1915: warning: passing arg 1 of `_inw' makes integer from pointer without a cast
/usr/src/ctest/git/kernel/drivers/net/smc91x.c:1915: warning: passing arg 1 of `_inw' makes integer from pointer without a cast
Signed-off-by: NHayato Fujiwara <fujiwara@linux-m32r.org>
Signed-off-by: NHirokazu Takata <takata@linux-m32r.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Patch from Richard Purdie

Update the PXA irda driver to match the recent platform device
suspend/resume level changes.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch rewrites various occurences of &sg[0] where sg is an array
of length one to simply sg.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch uses sg_set_buf/sg_init_one in some places where it was
duplicated.
Signed-off-by: NDavid Hardeman <david@2gen.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Greg KH <greg@kroah.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The dev_kfree_skb in islpci_eth_transmit happens while irqs are still
disabled, so either dev_kfree_skb_irq needs to be used or the skb
needs to be freed after irqs have been enabled again. This patch
should fix it.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDaniel Drake <dsd@gentoo.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

This one from my DMA_{32,64}BIT_MASK series did not seem to make it
through to upstream.

Use the DMA_{32,64}BIT_MASK constants from dma-mapping.h when calling
pci_set_dma_mask() or pci_set_consistent_dma_mask()
This patch includes dma-mapping.h explicitly because it caused errors
on some architectures otherwise.
See http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for details
Signed-off-by: NTobias Klauser <tklauser@nuerscht.ch>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Added information message when using the SRAM in mv643xx_eth_probe()
Signed-off-by: NNicolas DET <det.nicolas@free.fr>
Signed-off-by: NSven Luther <sl@bplan-gmbh.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

mesh, mac53c94 and airport already have an entry.  Add the network drivers
for pmac.
Signed-off-by: NOlaf Hering <olh@suse.de>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

drivers/net/e1000/e1000_main.c:3645: warning: `e1000_suspend' defined
but not used
Signed-off-by: NAshutosh Naik <ashutosh_naik@adaptec.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

The latest kernel added a pretty ugly fix for the orinoco etherleak bug
which contains bogus skb->len checks already done by the caller and causes
copies of all odd sized frames (which are quite common)

While the skb->len check should be ripped out the other fix is harder to do
properly so I'm proposing for this the -mm tree only until next 2.6.x so
that it gets tested.

Instead of copying buffers around blindly this code implements a padding
aware version of the hermes buffer writing function which does padding as
the buffer is loaded and thus more cleanly and without bogus 1.5K copies.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Cc: Alan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Allocate node local tx and rx descriptors for the e1000 driver
Signed-off-by: NRavikiran Thirumalai <kiran@scalex86.org>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Fix suspend/resume on b44 by freeing/reacquiring irq.  Otherwise it hangs
on resume.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

num_params is unused (and unusable in this form).
Signed-off-by: NFlorin Malita <fmalita@gmail.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

e1000_suspend is only used under #ifdef CONFIG_PM.  Move the declaration of
it to be the same way, just like e1000_resume, otherwise gcc whines on
compile.  I offer as evidence:

	static struct pci_driver e1000_driver = {
 	       .name     = e1000_driver_name,
 	      .id_table = e1000_pci_tbl,
  	      .probe    = e1000_probe,
  	      .remove   = __devexit_p(e1000_remove),
 	      /* Power Managment Hooks */
	#ifdef CONFIG_PM
 	       .suspend  = e1000_suspend,
 	       .resume   = e1000_resume
	#endif
	};

Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

The ipw2200 driver code in current GIT contains a kmalloc() followed by
a memset() without handling a possible memory allocation failure.
Signed-off-by: NPanagiotis Issaris <panagiotis.issaris@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

pci_set_master is unnecessary.

Signed-off-by: komurojun-mbn@nifty.com
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

1) Forgotten counter incrementation in sis900_rx() in case
     it doesn't get memory for skb, that leads to whole interface failure.
     Problem is accompanied with messages:
    eth0: Memory squeeze,deferring packet.
    eth0: NULL pointer encountered in Rx ring, skipping

2) If counter cur_rx overflows and there'll be temporary memory problems
     buffer can't be recreated later, when memory IS available.

3) Limit the work in handler to prevent the endless packets processing
   if new packets are generated faster then handled.
Signed-off-by: NKonstantin Khorenko <khorenko@sw.ru>
Signed-off-by: NVasily Averin <vvs@sw.ru>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

removing executable bits.

This patch replaces current PowerPC 4xx EMAC driver with
new, re-written from the scratch version. This patch is quite big
(~234K) because there is virtualy 0% of common code between old and
new version.

New driver uses NAPI, it solves stability problems under heavy packet
load and low memory, corrects chip register access and fixes numerous
small bugs I don't even remember now.

This patch has been tested on all supported in 2.6 PPC 4xx boards.
It's been used in production for almost a year now on custom
4xx hardware. PPC32 specific parts are already upstream.

Patch was acked by the current EMAC driver maintainer (Matt Porter). I
will be maintaining this new version.
Signed-off-by: NEugene Surovegin <ebs@ebshome.net>
--

 Kconfig                   |   72
 ibm_emac/Makefile         |   13
 ibm_emac/ibm_emac.h       |  418 +++--
 ibm_emac/ibm_emac_core.c  | 3414 ++++++++++++++++++++++++----------------------
 ibm_emac/ibm_emac_core.h  |  313 ++--
 ibm_emac/ibm_emac_debug.c |  377 ++---
 ibm_emac/ibm_emac_debug.h |   63
 ibm_emac/ibm_emac_mal.c   |  674 +++++----
 ibm_emac/ibm_emac_mal.h   |  336 +++-
 ibm_emac/ibm_emac_phy.c   |  335 ++--
 ibm_emac/ibm_emac_phy.h   |  105 -
 ibm_emac/ibm_emac_rgmii.c |  201 ++
 ibm_emac/ibm_emac_rgmii.h |   68
 ibm_emac/ibm_emac_tah.c   |  111 +
 ibm_emac/ibm_emac_tah.h   |   96 -
 ibm_emac/ibm_emac_zmii.c  |  255 +++
 ibm_emac/ibm_emac_zmii.h  |  114 -
 17 files changed, 4114 insertions(+), 2851 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Under heavy PCI bus load, ports of the DFE-580TX 4-ethernet port board stop
working, with currently no other cure than a powercycle.  Here is a tested
fix.  By the way, I also fixed some references and attribution.
Signed-off-by: NPhilippe De Muyter <phdm@macqel.be>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

IXDP2x01 systems can be built without PCI network cards, so we should not
require NET_PCI to build CS89x0 on these systems.
Signed-off-by: NDeepak Saxena <dsaxena@plexity.net>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

If the interface is not used right away after being probed it wastes
power needlessly. Noted by Holger Schurig.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Here is a patch that changes the way the MAC filter is computed for the
multicast addresses. The computation is taken from the SiS GPL driver.

This patch is necessary to get IPv6 working.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Looks like someone used the MII constants instead of the ethtool constants.
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

The documentation about s2io is available at
Documentation/networking/s2io.txt.
Signed-off-by: NAkinobu Mita <mita@miraclelinux.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>