dev->dvb is always not null, as it is an area at the dev
memory. So, checking if (dev->dvb) is always true.

Instead of this stupid check, what the code wants to do is
to know if the DVB was successully registered.

Fix it by checking, instead, for dvb->frontend. It should
also be sure that this var will be NULL if the device was
not properly initialized.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Suspend/resume conditions can be very tricky. Add some info
printk's to help tracking what's happening there.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Instead of using printk(KERN_foo, use pr_foo() macros.

No functional changes.

Note: we should do the same for dprintk(), but that would
require to remove the dprintk levels. So, for now, let's
not touch on it.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

No timers should be enabled during suspend. So,
stop them. At resume time, we should do the proper
initialization for it to keep working.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The STREAM_ON state is used by s_format callback,
but the driver never sets it.

Fix it. This will also be needed in order to handle
suspend/resume ops.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The scheduled work should be cancelled during suspend.

At resume time, we need to set the frontend again. So,
add such logic to the driver.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

At resume, we should restore the register contents. So,
reenable the bridge and GPIO settings.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Trying to make au0828 to suspend can do very bad things, as
the polling Kthread is not handled. We should disable it
during suspend, only re-enabling it at resume.

Still, analog and digital TV won't work, as we don't reinit
the settings at resume, but at least it won't hang.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Remove CONFIG_VIDEO_AU0828_RC scope around au0828_rc_register()
and au0828_rc_unregister() calls in au0828-core
Signed-off-by: NShuah Khan <shuah.kh@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Define au0828_rc_*() stubs to avoid compile errors when
VIDEO_AU0828_RC is disabled and avoid the need to enclose
au0828_rc_*() in ifdef CONFIG_VIDEO_AU0828_RC in .c files.
Signed-off-by: NShuah Khan <shuah.kh@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

It doesn't make sense to handle an IR code given before
suspending after the device resume. So, turn off IR
int while suspending.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

As the RC kthread can re-enable IR int, we should first
cancel the kthread and then disable IR int.

While here, remove a temporary debug printk.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

When the DVB code sets the frontend, it disables the IR
INT, probably due to some hardware bug, as there's no code
there at au8522 frontend that writes on register 0xe0.

Fixing it at au8522 code is hard, as it doesn't know if the
IR is enabled or disabled, and just restoring the value of
register 0xe0 could cause other nasty effects. So, better
to add a hack at au0828-input polling interval to enable int,
if disabled.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

HVR-850 also has a remote. Enable it.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The IR code increases the power consumption of the device.
Allow to disable it via modprobe parameter.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This sleep was doing some debouncing on the original driver.
This is not needed on Linux, because the RC core and the input
layer already takes care of it.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Remove the now unnecessary memset too.
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

HVR-950Q uses an I2C remote controller at address 0x47 (7-bits
notation). Add support for it.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Commits 21dc61d3 and 7a1dd50b reduced the board I2C
speed to 20 MHz by default, due to a I2C stretch issue:
while xc5000 uses i2c stretch when a command is sent to it,
au0828 doesn't support this feature.

However, this is needed only for Xceive tuners. The other
I2C devices can work at the max speed.

So, revert the workarounds at board level, handling it at
I2C level, only when talking with xc5000.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Fix the following warnings:
	drivers/media/usb/cx231xx/cx231xx-cards.c: In function 'read_eeprom':
	drivers/media/usb/cx231xx/cx231xx-cards.c:979:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add support for:
	[2013:025e] PCTV QuatroStick 522e

The hardware is identical to Hauppauge WinTV 930C-HD (model 1114xx)
Signed-off-by: NMatthias Schwarzott <zzam@gentoo.org>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add support for:
	[2013:0259] PCTV QuatroStick 521e

The hardware is identical to Hauppauge WinTV 930C-HD (model 1113xx)
Signed-off-by: NMatthias Schwarzott <zzam@gentoo.org>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add support for:
	[2040:b131] Hauppauge WinTV 930C-HD (model 1114xx)
Signed-off-by: NMatthias Schwarzott <zzam@gentoo.org>
Tested-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add support for:
	[2040:b130] Hauppauge WinTV 930C-HD (model 1113xx)

After loading the driver the first open to dvb device node fails.
Signed-off-by: NMatthias Schwarzott <zzam@gentoo.org>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This is needed to support PCTV QuatroStick 522e which uses a si2157.
The si2157 driver is written using i2c_client attachment.
Signed-off-by: NMatthias Schwarzott <zzam@gentoo.org>
Tested-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Instead of using some random value, return an error if the
PCB config is not available or doesn't match a know profile
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

That makes easier to understand the code. It would also help
to add support for having boards with just digital support
on some latter patch, as allowed by some PCB configs.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The initialization is already too complex. Use devm_ functions
to make the code simpler and easier to modify.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

On some newer boards, like HVR-930C HD, the information at
the PCB tables are sometimes higher than the ones actually
available on the device. That causes the probing code to
go past the interfaces array.

Add checks to the interface number before going past the
array.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The max number of interfaces was read from the wrong descriptor.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Fixes an old copy+paste bug that has survived all recent code
changes in this code area.
Signed-off-by: NFrank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Instead of counting the number of opened file handles, use function
v4l2_fh_is_singular_file() in em28xx_v4l2_open() and em28xx_v4l2_close() to
determine if the file handle is the first/last opened one.
Signed-off-by: NFrank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Instead of calling

...
struct v4l2_fh *fh = kzalloc(sizeof(*fh), GFP_KERNEL);
filp->private_data = fh;
v4l2_fh_init(fh, vdev);
v4l2_fh_add(fh);
...

simply use function v4l2_fh_open() which does all of these calls for us.
Signed-off-by: NFrank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

struct em28xx_fh isn't needed anymore because the only used field which is left is struct v4l2_fh fh.
Use struct v4l2_fh directly and remvove struct em28xx_fh.
Signed-off-by: NFrank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Pointer v4l2" can be used instead of "dev->v4l2, which saves some characters.
Signed-off-by: NFrank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Expression ((7bit i2c_addr << 1) & 0x01) can not be right
because it is always 0
Signed-off-by: NRaimonds Cicans <ray@apollo.lv>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

[media] drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c: remove unnecessary null test before usb_free_urb

Fix checkpatch warning:
WARNING: usb_free_urb(NULL) is safe this check is probably not required
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Tuner ID set into EEPROM is wrong, which causes driver to select
wrong tuner profile. That leads device non-working. Fix issue by
overriding known bad tuner IDs with suitable default value.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Change em28xx_dvb_fini() to set fe exit flag to DVB_FE_DEVICE_REMOVED
when device is disconnected. em28xx maintains device disconnect status
in em28xx device. fe drivers will be able to now check the fe exit
status to avoid accessing the device, from their release interfaces
when called from disconnect path. This change depends on dvb-core
change that exports fe exit flag by moving it from fepriv to fe.
Signed-off-by: NShuah Khan <shuah.kh@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>