The ixgbe driver was untested with device ID 8086:10c8 but still advertises
support.  Currently if this device is present in the system when the driver
is loaded, the system will panic.
Remove this device ID until full support can be tested with available
hardware.  This patch is necessary for 2.6.24, 2.6.25 and 2.6.26
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

The OQO model 2 has an RTL8139 from Atheros that doesn't like MMIO.
It fails on modprobe, with a 'PCI Bus error' message.

Force it to always use polled IO.
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This is needed to support devices that only work with PIO without
penalising devices that work fine with MMIO in distro kernels.
It also allows us to eventually use PIO as a fallback when setting
up MMIO fails.
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

MII_M1111_HWCFG_FIBER_COPPER_RES is a bit of MII_M1111_PHY_EXT_SR, not
MII_M1111_PHY_EXT_CR.
Signed-off-by: NWang Jian <lark@linux.net.cn>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

The 27.15 bit (MII_M1111_HWCFG_FIBER_COPPER_AUTO) is disable bit. When
set to 1, copper/fiber auto selection is disabled. The current code
to enable but actually disable auto selection.
Signed-off-by: NWang Jian <lark@linux.net.cn>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

drivers/net/igb/igb_main.c:388:20: warning: Using plain integer as NULL pointer
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Remove magic numbers for items that we already have
defined in the register header file.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NPeter Tiedemann <ptiedem@de.ibm.com>
Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Cc: Martin Schwidefsky <schwidefska@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndy Richter <richtera@us.ibm.com>
Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Change driver version to 4.0.0. Netxen firmwares as old as
v3.4.216 are supported.
Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Enable tso6 and ipv6 checksum, interrupt coalescing for NX3031.
Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

NX3031 supports cut-through operation where ingress packets are
directly dma'ed into host buffers to reduce latency.

This requires larger dma buffers (2kb) and different alignemnt.

The buffer posting logic is changed a bit. The free rx buffers
are maintained in linked list, since the received reference
handles can be out of order. However rx descriptors are still
posted sequentially, indexed by producer.
Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

MAC addr, multicast filters, mtu are set through firmware commands
in firmware v4.0.0+ because of virtualization of physical ports.
Link status is also read from registers allocated by firmware for
each virtual port.
Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Contains rx and tx ring context management and certain
firmware commands for netxen firmware v4.0.0+.

This patch gathers all HW context management code into
netxen_nic_ctx.c.
Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

It had only couple of functions which are moved to main.c
Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Add initialization code in pci probe for new chip and retain
compatibility with old revisions.
Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

New revision of netxen chip has 2MB PCI memory. Older chips
had 128MB addressable PCI memory. To retain compatibility,
this patch adds function pointers based on pci bar0 size.
Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Add macros for new chip revision and board configurations.
Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Enable multicast address filtering capabilities in the hardware.
Upto 16 multicast addresses can be programmed for each physical
port. Support "allmulti" mode, if enabled.
Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

o Reduce access to global arrays in data path.
o Remove duplicate/unused variables, unecessary alignment constraints.
o Use correct pci_dev instead of fallback device for consistent
  allocations.
o Disable ethtool set_eeprom functionality for now, it was only used
  for flashing firmware.
Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

various drivers were using the wrong APIs:

 drivers/built-in.o: In function `hp_probe1':
 hp.c:(.init.text+0xa280): undefined reference to `NS8390_init'

fixed via:

cd drivers/net/; sed -i 's/NS8390_/NS8390p_/g' \
  $(grep -l NS8390_ $(grep 8390p.o Makefile | cut -d' ' -f3 | \
      sed 's/.o$/.c/g'))
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Switch to ioremap_wc(). We keep the MTRR code since ioremap_wc()
will use UC_MINUS when falling back to uncachable, and thus let
the MTRR WC take precedence.

Also rename the error path better.
Signed-off-by: NBrice Goglin <brice@myri.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Remove the wcfifo since it never gave any performance improvement.
Signed-off-by: NBrice Goglin <brice@myri.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

IFF_PROMISC flag shouldn't be set or cleared by drivers, because
whether device be promisc mode is decided by how many upper layer
callers being referenced to it.
And the promisc changing feature of de4x5 ioctl is developer debug
feature, we can remove it now.
Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com>
Acked-by: NGrant Grundler <grundler@parisc-linux.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Adrian Bunk reports this build error:

CC      drivers/s390/net/qeth_l3_main.o
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/s390/net/qeth_l3_main.c:
In function 'qeth_l3_hard_start_xmit':
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/s390/net/qeth_l3_main.c:
2654: error: implicit declaration of function 'VLAN_TX_SKB_CB'
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/s390/net/qeth_l3_main.c:
2654: error: invalid type argument of '->' (have 'int')
make[3]: *** [drivers/s390/net/qeth_l3_main.o] Error 1

The intention of the driver appears to be to invalidate the VLAN tag.
Change it to set skb->vlan_tci to zero, which has the same effect.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

The mdio_port, mdio_bit, mdc_port and mdc_bit fields in the
fs_mii_bb_platform_info structure are left-overs from the move to the Phy
Abstraction Layer subsystem. They are not used anymore and can be safely
removed.
Signed-off-by: NLaurent Pinchart <laurentp@cse-semaphore.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Merge branch 'r8169-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/romieu/netdev-2.6 into upstream-fixes

As reported by Alexey Dobriyan:

	  CHECK   net/ipv4/tcp_output.c
	net/ipv4/tcp_output.c:475:7: warning: dubious: !x & y

And sparse is damn right!

	if (unlikely(!OPTION_TS & opts->options))
		    ^^^
		size += TCPOLEN_SACKPERM_ALIGNED;

OPTION_TS is (1 << 1), so condition will never trigger.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Based upon a report by Olaf Hering.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch clamps the cscov setsockopt values to a maximum of 0xFFFF.

Setsockopt values greater than 0xffff can cause an unwanted
wrap-around.  Further, IPv6 jumbograms are not supported (RFC 3838,
3.5), so that values greater than 0xffff are not even useful.

Further changes: fixed a typo in the documentation.
Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As suggested by Dave:

This patch adds a function to get the driver name from a struct net_device,
and consequently uses this in the watchdog timeout handler to print as 
part of the message. 
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Minor nit, use size_t for allocation size and kcalloc to allocate
an array. Probably makes no actual code difference.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This fixes the bridge reference count problem and cleanups ipv6 FIB
timer management.  Don't use expires field, because it is not a proper
way to test, instead use timer_pending().
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I was looking at this out of interest, but I'm in no way familiar with
the code.

Looks to me that the error handling code in mac80211_hwsim is awkward.
Which leads to it calling ieee80211_unregister_hw even when
ieee80211_register_hw failed.

The function has a for loop where it generates all simulated radios.
when something fails, the error handling will call mac80211_hwsim_free
which frees all simulated radios who's pointer isn't zero. However the
information stored is insufficient to determine whether or not the call
to ieee80211_register_hw succeeded or not for a specific radio. The
included patch makes init_mac80211_hwsim clean up the current simulated
radio, and then calls into mac80211_hwsim_free to clean up all the
radios that did succeed.

This however doesn't explain why the rate control registration failed..
build tested this, but had some problems reproducing the original
problem.
Signed-off-by: NIan Schram <ischram@telenet.be>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduced by a258860e (netfilter: ctnetlink: add full support for SCTP to ctnetlink):

net/netfilter/nf_conntrack_proto_sctp.c:483:2: warning: cast from restricted type
net/netfilter/nf_conntrack_proto_sctp.c:483:2: warning: incorrect type in argument 1 (different base types)
net/netfilter/nf_conntrack_proto_sctp.c:483:2:    expected unsigned int [unsigned] [usertype] x
net/netfilter/nf_conntrack_proto_sctp.c:483:2:    got restricted unsigned int const <noident>
net/netfilter/nf_conntrack_proto_sctp.c:483:2: warning: cast from restricted type
net/netfilter/nf_conntrack_proto_sctp.c:483:2: warning: cast from restricted type
net/netfilter/nf_conntrack_proto_sctp.c:483:2: warning: cast from restricted type
net/netfilter/nf_conntrack_proto_sctp.c:483:2: warning: cast from restricted type
net/netfilter/nf_conntrack_proto_sctp.c:487:2: warning: cast from restricted type
net/netfilter/nf_conntrack_proto_sctp.c:487:2: warning: incorrect type in argument 1 (different base types)
net/netfilter/nf_conntrack_proto_sctp.c:487:2:    expected unsigned int [unsigned] [usertype] x
net/netfilter/nf_conntrack_proto_sctp.c:487:2:    got restricted unsigned int const <noident>
net/netfilter/nf_conntrack_proto_sctp.c:487:2: warning: cast from restricted type
net/netfilter/nf_conntrack_proto_sctp.c:487:2: warning: cast from restricted type
net/netfilter/nf_conntrack_proto_sctp.c:487:2: warning: cast from restricted type
net/netfilter/nf_conntrack_proto_sctp.c:487:2: warning: cast from restricted type
net/netfilter/nf_conntrack_proto_sctp.c:532:42: warning: incorrect type in assignment (different base types)
net/netfilter/nf_conntrack_proto_sctp.c:532:42:    expected restricted unsigned int <noident>
net/netfilter/nf_conntrack_proto_sctp.c:532:42:    got unsigned int
net/netfilter/nf_conntrack_proto_sctp.c:534:39: warning: incorrect type in assignment (different base types)
net/netfilter/nf_conntrack_proto_sctp.c:534:39:    expected restricted unsigned int <noident>
net/netfilter/nf_conntrack_proto_sctp.c:534:39:    got unsigned int
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

According to RFC2327, the connection information is optional
in the session description since it can be specified in the
media description instead.

My provider does exactly that and does not provide any connection
information in the session description.  As a result the new
kernel drops all invite responses.

This patch makes it optional as documented.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJan Engelhardt <jengelh@medozas.de>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>