With CONFIG_SMP=n:

*** Warning: "cpu_online_map" [drivers/firmware/dcdbas.ko] undefined!

due to set_cpus_allowed().
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The mpic interrupt controller driver (used on G5 and early pSeries among
others) has a bug where it doesn't get the right virtual address for the
timer registers.  It causes the driver to poke at the MMIO space of
whatever has been mapped just next to it (ouch !) when initializing and
causes boot failures on some IBM machines.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The NUMA counters in struct per_cpu_pageset (linux/mmzone.h) are never
cleared today.  This works ok for CPU 0 on NUMA machines because
boot_pageset[] is already zero, but for other CPU:s this results in
uninitialized counters.
Signed-off-by: NMagnus Damm <magnus@valinux.co.jp>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There are still a couple of cases where md threads (the resync/recovery
thread) is not interruptible since the change to use kthreads.  All places
there it tests "signal_pending", it should also test kthread_should_stop,
as with this patch.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When reserving an PCI quirk, note that in the kernel bootup messages.

Also, parse the strange PIIX4 device resources - they should get their
own PCI resource quirks, but for now just print out what it finds to
verify that the code does the right thing.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NJochen Friedrich <jochen@scram.de>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>

Signed-off-by: NJochen Friedrich <jochen@scram.de>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>

Signed-off-by: NYan Zheng <yanzheng@21cn.com>
Acked-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>

If qla2x00_probe_one()'s call to qla2x00_iospace_config() fails, we call
qla2x00_free_device() to clean up.  But because ha->dpc_pid hasn't been set
yet, qla2x00_free_device() tries to stop a kernel thread which hasn't started
yet.  It does wait_for_completion() against an uninitialised completion struct
and the kernel hangs up.

Fix it by initialising ha->dpc_pid a bit earlier.

Cc: Andrew Vasquez <andrew.vasquez@qlogic.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

My alpha build is exploding because asm/atomic.h now needs smb_mb(), which is
over in the (not included) system.h.

I fear what will happen if I include system.h into atomic.h, so let's put the
barriers into their own header file.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This small patch returns the stride/line length of the framebuffer via
sysfs.
Signed-off-by: NJames Simmons <jsimmons@infradead.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The patch fixes Oops from sound drivers using generic platform device
but have no suspend/resume callbacks.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Without this patch, uml compile fails with:

  LD      .tmp_vmlinux1
arch/um/kernel/built-in.o: In function `config_gdb_cb':
arch/um/kernel/tt/gdb.c:129: undefined reference to `TASK_EXTERN_PID'

Tested on i386, but fix needed on x86_64 too AFAICS.
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This might be harmless, but looks like a race from code inspection (I
was unable to trigger it).  I must admit, I don't understand why we
can't return TIMER_RETRY after 'spin_unlock(&p->sighand->siglock)'
without doing bump_cpu_timer(), but this is what original code does.

posix_cpu_timer_set:

	read_lock(&tasklist_lock);

	spin_lock(&p->sighand->siglock);
	list_del_init(&timer->it.cpu.entry);
	spin_unlock(&p->sighand->siglock);

We are probaly deleting the timer from run_posix_cpu_timers's 'firing'
local list_head while run_posix_cpu_timers() does list_for_each_safe.

Various bad things can happen, for example we can just delete this timer
so that list_for_each() will not notice it and run_posix_cpu_timers()
will not reset '->firing' flag. In that case,

	....

	if (timer->it.cpu.firing) {
		read_unlock(&tasklist_lock);
		timer->it.cpu.firing = -1;
		return TIMER_RETRY;
	}

sys_timer_settime() goes to 'retry:', calls posix_cpu_timer_set() again,
it returns TIMER_RETRY ...
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

No need to rebalance when task exited
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

do_exit() clears ->it_##clock##_expires, but nothing prevents
another cpu to attach the timer to exiting process after that.

After exit_notify() does 'write_unlock_irq(&tasklist_lock)' and
before do_exit() calls 'schedule() local timer interrupt can find
tsk->exit_state != 0. If that state was EXIT_DEAD (or another cpu
does sys_wait4) interrupted task has ->signal == NULL.

At this moment exiting task has no pending cpu timers, they were cleaned
up in __exit_signal()->posix_cpu_timers_exit{,_group}(), so we can just
return from irq.
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

1. cleanup_timers() sets timer->task = NULL under tasklist + ->sighand locks.
   That means that this code in posix_cpu_timer_del() and posix_cpu_timer_set()

   		lock_timer(timer);
		if (timer->task == NULL)
			return;
		read_lock(tasklist);
		put_task_struct(timer->task)

   is racy. With this patch timer->task modified and accounted only under
   timer->it_lock. Sadly, this means that dead task_struct won't be freed
   until timer deleted or armed.

2. run_posix_cpu_timers() collects expired timers into local list under
   tasklist + ->sighand again. That means that posix_cpu_timer_del()
   should check timer->it.cpu.firing under these locks too.
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We should always re-arm an event queue's interrupt in
mthca_tavor_interrupt() if the corresponding bit is set in the event cause
register (ECR), even if we didn't find any entries in the EQ.  If we don't,
then there's a window where we miss an EQ entry and then get stuck because
we don't get another EQ event.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix a bug which was reported and diagnosed by
Stefan Jones <stefan.jones@churchillrandoms.co.uk>

IDR trees include a cache of idr_layer objects.  There's no way to destroy
this cache, so when we discard an overall idr tree we end up leaking some
memory.

Add and use idr_destroy() for this.  v9fs and infiniband also need to use
idr_destroy() to avoid leaks.

Or, we make the cache global, like radix_tree_preload().  Which is probably
better.  Later.

Cc: Eric Van Hensbergen <ericvh@ericvh.myip.org>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Robert Love <rml@novell.com>
Cc: John McCutchan <ttb@tentacle.dhs.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

On 2005-05-01, Gerd Knorr sent in a patch to add cx22702 to cx88-dvb:

 [PATCH] dvb: cx22702 frontend driver update
http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=9990d744bea7d28e83c420e2c9d524c7a8a2d136

...but as we can see, the Kconfig portion of his patch was incorrectly
applied to saa7134-dvb instead of cx88-dvb.

On 2005-06-24, Adrian bunk fixed cx88-dvb:

 [PATCH] VIDEO_CX88_DVB must select DVB_CX22702
http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=d6988588e13616587aa879c2e0bd7cd811705e5d

...but we never removed the original patch from Gerd.

This patch sets things straight:

saa7134-dvb should not select cx22702
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch fixes error handling in sel_make_bools(), where currently we'd
get a memory leak via security_get_bools() and try to kfree() the wrong
pointer if called again.
Signed-off-by: NJames Morris <jmorris@namei.org>
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch fixes a possible NULL dereference in policydb_destroy, where
p->type_attr_map can be NULL if policydb_destroy is called to clean up a
partially loaded policy upon an error during policy load.  Please apply.
Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov>
Acked-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Another case of missing call to security_file_permission: aio functions
(namely, io_submit) does not check credentials with security modules.

Below is the simple patch to the problem.  It seems that it is enough to
check for rights at the request submission time.
Signed-off-by: NKostik Belousov <kostikbel@gmail.com>
Signed-off-by: NChris Wright <chrisw@osdl.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix typos & trailing whitespace.
Add blank lines in a few places.
Remove "AM53C974=" option:  driver does not exist.
Restrict to < 80 columns in most places (but don't split formatted
  command-line arguments).
Add a few option arguments for completeness.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

That's what we've always historically done, and bigger windows seem to
confuse some cardbus bridges. Or something.

Alan reports that this makes the ThinkPad 600x series work properly
again: the 4kB IO window for some reason made IDE DMA not work, which
makes IDE painfully slow even if it works after DMA timeouts.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Bursty timers aren't good for anybody, very much including latency for
other programs when we trigger lots of timers in interrupt context.  So
set a random limit, after which we'll handle the rest on the next timer
tick.

Noted by Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

neigh_changeaddr attempts to delete neighbour timers without setting
nud_state.  This doesn't work because the timer may have already fired
when we acquire the write lock in neigh_changeaddr.  The result is that
the timer may keep firing for quite a while until the entry reaches
NEIGH_FAILED.

It should be setting the nud_state straight away so that if the timer
has already fired it can simply exit once we relinquish the lock.

In fact, this whole function is simply duplicating the logic in
neigh_ifdown which in turn is already doing the right thing when
it comes to deleting timers and setting nud_state.

So all we have to do is take that code out and put it into a common
function and make both neigh_changeaddr and neigh_ifdown call it.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

neigh_add_timer cannot use add_timer unconditionally.  The reason is that
by the time it has obtained the write lock someone else (e.g., neigh_update)
could have already added a new timer.

So it should only use mod_timer and deal with its return value accordingly.

This bug would have led to rare neighbour cache entry leaks.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Stack traces are very helpful in determining the exact nature of a bug.
So let's print a stack trace when the timer is added twice.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

As stated in Documentation/atomic_ops.txt, atomic functions
returning values must have the memory barriers both before and after
the operation.

Thanks to DaveM for pointing that out.
Signed-off-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

On architectures where the char type defaults to unsigned some of the
arithmetic in the AX.25 stack to fail, resulting in some packets being dropped
on receive.

Credits for tracking this down and the original patch to
Bob Brose N0QBJ <linuxhams@n0qbj-11.ampr.org>.
Signed-off-by: NRalf Baechle DL5RB <ralf@linux-mips.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>

IPVS used flag NFC_IPVS_PROPERTY in nfcache but as now nfcache was removed the
new flag 'ipvs_property' still needs to be copied. This patch should be
included in 2.6.14.

Further comments from Harald Welte:

Sorry, seems like the bug was introduced by me.
Signed-off-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NHarald Welte <laforge@netfilter.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>

Not sure how it slipped by, but here's a trivial typo fix for powernow.
Signed-off-by: NChris Wright <chrisw@osdl.org>
[ It's "nurter" backwards.. Maybe we have a hillbilly The Shining fan? ]
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When I originally moved exit_itimers into __exit_signal, that was the only
place where we could reliably know it was the last thread in the group
dying, without races.  Since then we've gotten the signal_struct.live
counter, and do_exit can reliably do group-wide cleanup work.

This patch moves the call to do_exit, where it's made without locks.  This
avoids the deadlock issues that the old __exit_signal code's comment talks
about, and the one that Oleg found recently with process CPU timers.

[ This replaces e03d13e9, which is why
  it was just reverted. ]
Signed-off-by: NRoland McGrath <roland@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Revert commit e03d13e9, to be replaced
by a much nicer fix from Roland.

AMD recently discovered that on some hardware, there is a race condition
possible when a C-state change request goes onto the bus at the same
time as a P-state change request.

Both requests happen, but the southbridge hardware only acknowledges the
C-state change.  The PowerNow! driver is then stuck in a loop, waiting
for the P-state change acknowledgement.  The driver eventually times
out, but can no longer perform P-state changes.

It turns out the solution is to resend the P-state change, which the
southbridge will acknowledge normally.

Thanks to Johannes Winkelmann for reporting this and testing the fix.
Signed-off-by: NMark Langsdorf <mark.langsdorf@amd.com>
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This fixes a stupid typo bug in the iSeries hash table code.

When we place a hash PTE in the secondary bucket, instead of setting the
SECONDARY flag bit, as we should, we (redundantly) set the VALID flag.

This was introduced with the patch abolishing bitfields from the hash
table code.  Mea culpa, oops.  It hasn't been noticed until now because
in practice we don't hit the secondary bucket terribly often.
Signed-off-by: NDavid Gibson <dwg@au1.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>