- 12 7月, 2013 5 次提交
-
-
由 Dave Hansen 提交于
I completely botched understanding the calling conventions of do_div(). I assumed that do_div() returned the result instead of realizing that it modifies its argument and returns a remainder. The side-effect from this would be bogus numbers for the "msecs" value in the warning messages: INFO: NMI handler (perf_event_nmi_handler) took too long to run: 0.114 msecs Note, there was a second fix posted by Stephane Eranian for a separate patch which I also botched: http://lkml.kernel.org/r/20130704223010.GA30625@quadSigned-off-by: NDave Hansen <dave.hansen@linux.intel.com> Cc: Dave Hansen <dave@sr71.net> Link: http://lkml.kernel.org/r/20130708214404.B0B6EA66@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Peter Zijlstra 提交于
Jiri managed to trigger this warning: [] ====================================================== [] [ INFO: possible circular locking dependency detected ] [] 3.10.0+ #228 Tainted: G W [] ------------------------------------------------------- [] p/6613 is trying to acquire lock: [] (rcu_node_0){..-...}, at: [<ffffffff810ca797>] rcu_read_unlock_special+0xa7/0x250 [] [] but task is already holding lock: [] (&ctx->lock){-.-...}, at: [<ffffffff810f2879>] perf_lock_task_context+0xd9/0x2c0 [] [] which lock already depends on the new lock. [] [] the existing dependency chain (in reverse order) is: [] [] -> #4 (&ctx->lock){-.-...}: [] -> #3 (&rq->lock){-.-.-.}: [] -> #2 (&p->pi_lock){-.-.-.}: [] -> #1 (&rnp->nocb_gp_wq[1]){......}: [] -> #0 (rcu_node_0){..-...}: Paul was quick to explain that due to preemptible RCU we cannot call rcu_read_unlock() while holding scheduler (or nested) locks when part of the read side critical section was preemptible. Therefore solve it by making the entire RCU read side non-preemptible. Also pull out the retry from under the non-preempt to play nice with RT. Reported-by: NJiri Olsa <jolsa@redhat.com> Helped-out-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: <stable@kernel.org> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Jiri Olsa 提交于
The '!ctx->is_active' check has a valid scenario, so there's no need for the warning. The reason is that there's a time window between the 'ctx->is_active' check in the perf_event_enable() function and the __perf_event_enable() function having: - IRQs on - ctx->lock unlocked where the task could be killed and 'ctx' deactivated by perf_event_exit_task(), ending up with the warning below. So remove the WARN_ON_ONCE() check and add comments to explain it all. This addresses the following warning reported by Vince Weaver: [ 324.983534] ------------[ cut here ]------------ [ 324.984420] WARNING: at kernel/events/core.c:1953 __perf_event_enable+0x187/0x190() [ 324.984420] Modules linked in: [ 324.984420] CPU: 19 PID: 2715 Comm: nmi_bug_snb Not tainted 3.10.0+ #246 [ 324.984420] Hardware name: Supermicro X8DTN/X8DTN, BIOS 4.6.3 01/08/2010 [ 324.984420] 0000000000000009 ffff88043fce3ec8 ffffffff8160ea0b ffff88043fce3f00 [ 324.984420] ffffffff81080ff0 ffff8802314fdc00 ffff880231a8f800 ffff88043fcf7860 [ 324.984420] 0000000000000286 ffff880231a8f800 ffff88043fce3f10 ffffffff8108103a [ 324.984420] Call Trace: [ 324.984420] <IRQ> [<ffffffff8160ea0b>] dump_stack+0x19/0x1b [ 324.984420] [<ffffffff81080ff0>] warn_slowpath_common+0x70/0xa0 [ 324.984420] [<ffffffff8108103a>] warn_slowpath_null+0x1a/0x20 [ 324.984420] [<ffffffff81134437>] __perf_event_enable+0x187/0x190 [ 324.984420] [<ffffffff81130030>] remote_function+0x40/0x50 [ 324.984420] [<ffffffff810e51de>] generic_smp_call_function_single_interrupt+0xbe/0x130 [ 324.984420] [<ffffffff81066a47>] smp_call_function_single_interrupt+0x27/0x40 [ 324.984420] [<ffffffff8161fd2f>] call_function_single_interrupt+0x6f/0x80 [ 324.984420] <EOI> [<ffffffff816161a1>] ? _raw_spin_unlock_irqrestore+0x41/0x70 [ 324.984420] [<ffffffff8113799d>] perf_event_exit_task+0x14d/0x210 [ 324.984420] [<ffffffff810acd04>] ? switch_task_namespaces+0x24/0x60 [ 324.984420] [<ffffffff81086946>] do_exit+0x2b6/0xa40 [ 324.984420] [<ffffffff8161615c>] ? _raw_spin_unlock_irq+0x2c/0x30 [ 324.984420] [<ffffffff81087279>] do_group_exit+0x49/0xc0 [ 324.984420] [<ffffffff81096854>] get_signal_to_deliver+0x254/0x620 [ 324.984420] [<ffffffff81043057>] do_signal+0x57/0x5a0 [ 324.984420] [<ffffffff8161a164>] ? __do_page_fault+0x2a4/0x4e0 [ 324.984420] [<ffffffff8161665c>] ? retint_restore_args+0xe/0xe [ 324.984420] [<ffffffff816166cd>] ? retint_signal+0x11/0x84 [ 324.984420] [<ffffffff81043605>] do_notify_resume+0x65/0x80 [ 324.984420] [<ffffffff81616702>] retint_signal+0x46/0x84 [ 324.984420] ---[ end trace 442ec2f04db3771a ]--- Reported-by: NVince Weaver <vincent.weaver@maine.edu> Signed-off-by: NJiri Olsa <jolsa@redhat.com> Suggested-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: <stable@kernel.org> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1373384651-6109-2-git-send-email-jolsa@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Jiri Olsa 提交于
Currently when the child context for inherited events is created, it's based on the pmu object of the first event of the parent context. This is wrong for the following scenario: - HW context having HW and SW event - HW event got removed (closed) - SW event stays in HW context as the only event and its pmu is used to clone the child context The issue starts when the cpu context object is touched based on the pmu context object (__get_cpu_context). In this case the HW context will work with SW cpu context ending up with following WARN below. Fixing this by using parent context pmu object to clone from child context. Addresses the following warning reported by Vince Weaver: [ 2716.472065] ------------[ cut here ]------------ [ 2716.476035] WARNING: at kernel/events/core.c:2122 task_ctx_sched_out+0x3c/0x) [ 2716.476035] Modules linked in: nfsd auth_rpcgss oid_registry nfs_acl nfs locn [ 2716.476035] CPU: 0 PID: 3164 Comm: perf_fuzzer Not tainted 3.10.0-rc4 #2 [ 2716.476035] Hardware name: AOpen DE7000/nMCP7ALPx-DE R1.06 Oct.19.2012, BI2 [ 2716.476035] 0000000000000000 ffffffff8102e215 0000000000000000 ffff88011fc18 [ 2716.476035] ffff8801175557f0 0000000000000000 ffff880119fda88c ffffffff810ad [ 2716.476035] ffff880119fda880 ffffffff810af02a 0000000000000009 ffff880117550 [ 2716.476035] Call Trace: [ 2716.476035] [<ffffffff8102e215>] ? warn_slowpath_common+0x5b/0x70 [ 2716.476035] [<ffffffff810ab2bd>] ? task_ctx_sched_out+0x3c/0x5f [ 2716.476035] [<ffffffff810af02a>] ? perf_event_exit_task+0xbf/0x194 [ 2716.476035] [<ffffffff81032a37>] ? do_exit+0x3e7/0x90c [ 2716.476035] [<ffffffff810cd5ab>] ? __do_fault+0x359/0x394 [ 2716.476035] [<ffffffff81032fe6>] ? do_group_exit+0x66/0x98 [ 2716.476035] [<ffffffff8103dbcd>] ? get_signal_to_deliver+0x479/0x4ad [ 2716.476035] [<ffffffff810ac05c>] ? __perf_event_task_sched_out+0x230/0x2d1 [ 2716.476035] [<ffffffff8100205d>] ? do_signal+0x3c/0x432 [ 2716.476035] [<ffffffff810abbf9>] ? ctx_sched_in+0x43/0x141 [ 2716.476035] [<ffffffff810ac2ca>] ? perf_event_context_sched_in+0x7a/0x90 [ 2716.476035] [<ffffffff810ac311>] ? __perf_event_task_sched_in+0x31/0x118 [ 2716.476035] [<ffffffff81050dd9>] ? mmdrop+0xd/0x1c [ 2716.476035] [<ffffffff81051a39>] ? finish_task_switch+0x7d/0xa6 [ 2716.476035] [<ffffffff81002473>] ? do_notify_resume+0x20/0x5d [ 2716.476035] [<ffffffff813654f5>] ? retint_signal+0x3d/0x78 [ 2716.476035] ---[ end trace 827178d8a5966c3d ]--- Reported-by: NVince Weaver <vincent.weaver@maine.edu> Signed-off-by: NJiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: <stable@kernel.org> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1373384651-6109-1-git-send-email-jolsa@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ingo Molnar 提交于
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: * Fix some freeing bugs on the parsing error paths, from Adrian Hunter. * Update symbol_conf.nr_events when processing attribute events, fix from Adrian Hunter. * Fix missing increment in sample parsing when PERF_SAMPLE_STACK_USER is present, from Adrian Hunt. * Fix count parameter to read call in event_format__new, from David Ahern. * Remove -A/--append option, not working for a long time, from Jiri Olsa. * Remove -f/--force option, was a no-op for quite some time, from Jiri Olsa. * Fix -x/--exclude-other option for report command, from Jiri Olsa. * Cross build fixes, at least one for Android, from Joonsoo Kim. * Fix memory allocation fail check in mem{set,cpy} 'perf bench' workloads, from Kirill A. Shutemov. * Revert regression in configuration of Python support, from Michael Witten. * Fix -ldw/-lelf link test when static linking, from Mike Frysinger. * Fix issues with multiple children processing in perf_evlist__start_workload(), from Namhyung Kim. * Fix broken include in Context.xs ('perf script'), from Ramkumar Ramachandra. * Fixes for build problems, from Robert Richter. * Fix a typo of a Power7 event name, from Runzhen Wang. * Avoid sending SIGTERM to random processes in 'perf stat', fix from Stephane Eranian. * Fix per-socket output bug for uncore events in 'perf stat', from Stephane Eranian. * Fix vdso list searching, from Waiman Long. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 11 7月, 2013 2 次提交
-
-
由 Ramkumar Ramachandra 提交于
765532c8 (perf script: Finish the rename from trace to script, 2010-12-23) made a mistake during find-and-replace replacing "../../../util/trace-event.h" with "../../../util/script-event.h", a non-existent file. Fix this include. Signed-off-by: NRamkumar Ramachandra <artagnon@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1373364033-7918-3-git-send-email-artagnon@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Mike Frysinger 提交于
Since libelf sometimes uses libpthread, we have to list that after -lelf when someone tries to build statically. Else things go boom: Makefile:479: *** No libelf.h/libelf found, please install \ libelf-dev/elfutils-libelf-devel. Stop. Similarly, the -ldw test fails as it often uses -lz: Makefile:462: No libdw.h found or old libdw.h found or elfutils is older \ than 0.138, disables dwarf support. Please install new elfutils-devel/libdw-dev And if we add debugging to try-cc, we see: + echo '#include <dwarf.h> int main(void) { Dwarf *dbg = dwarf_begin(0, DWARF_C_READ); return (long)dbg; }' + i686-pc-linux-gnu-gcc -x c - -O2 -pipe -march=atom -mtune=atom -mfpmath=sse -g \ -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE \ -ldw -lelf -static -lpthread -lrt -lelf -lm -o .24368 /usr/lib/libdw.a(dwarf_begin_elf.o):function check_section.isra.1: error: undefined reference to 'inflateInit_' /usr/lib/libdw.a(dwarf_begin_elf.o):function check_section.isra.1: error: undefined reference to 'inflate' /usr/lib/libdw.a(dwarf_begin_elf.o):function check_section.isra.1: error: undefined reference to 'inflateReset' /usr/lib/libdw.a(dwarf_begin_elf.o):function check_section.isra.1: error: undefined reference to 'inflateEnd' + echo '#include <libelf.h> int main(void) { Elf *elf = elf_begin(0, ELF_C_READ, 0); return (long)elf; }' + i686-pc-linux-gnu-gcc -x c - -O2 -pipe -march=atom -mtune=atom -mfpmath=sse -g \ -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE \ -static -lpthread -lrt -lelf -lm -o .19216 /usr/lib/libelf.a(elf_begin.o):function file_read_elf: error: undefined reference to 'pthread_rwlock_init' /usr/lib/libelf.a(elf_begin.o):function __libelf_read_mmaped_file: error: undefined reference to 'pthread_rwlock_init' /usr/lib/libelf.a(elf_begin.o):function __libelf_read_mmaped_file: error: undefined reference to 'pthread_rwlock_init' /usr/lib/libelf.a(elf_begin.o):function read_file: error: undefined reference to 'pthread_rwlock_init' /usr/lib/libelf.a(elf_begin.o):function lock_dup_elf.8072: error: undefined reference to 'pthread_rwlock_unlock' /usr/lib/libelf.a(elf_begin.o):function lock_dup_elf.8072: error: undefined reference to 'pthread_rwlock_wrlock' /usr/lib/libelf.a(elf_begin.o):function elf_begin: error: undefined reference to 'pthread_rwlock_rdlock' /usr/lib/libelf.a(elf_begin.o):function elf_begin: error: undefined reference to 'pthread_rwlock_unlock' Signed-off-by: NMike Frysinger <vapier@gentoo.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1368073064-18276-1-git-send-email-vapier@gentoo.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 10 7月, 2013 1 次提交
-
-
由 Michael Witten 提交于
Among other things, the following: commit 31160d7f Date: Tue Jan 8 16:22:36 2013 -0500 perf tools: Fix GNU make v3.80 compatibility issue attempts to aid the user by tapping into an existing error message, as described in the commit message: ... Also fix an issue where _get_attempt was called with only one argument. This prevented the error message from printing the name of the variable that can be used to fix the problem. or more precisely: -$(if $($(1)),$(call _ge_attempt,$($(1)),$(1)),$(call _ge_attempt,$(2))) +$(if $($(1)),$(call _ge_attempt,$($(1)),$(1)),$(call _ge_attempt,$(2),$(1))) However, The "missing" argument was in fact missing on purpose; it's absence is a signal that the error message should be skipped, because the failure would be due to the default value, not any user-supplied value. This can be seen in how `_ge_attempt' uses `gea_err' (in the config/utilities.mak file): _ge_attempt = $(if $(get-executable),$(get-executable),$(_gea_warn)$(call _gea_err,$(2))) _gea_warn = $(warning The path '$(1)' is not executable.) _gea_err = $(if $(1),$(error Please set '$(1)' appropriately)) That is, because the argument is no longer missing, the value `$(1)' (associated with `_gea_err') always evaluates to true, thus always triggering the error condition that is meant to be reserved for only the case when a user explicitly supplies an invalid value. Concretely, the result is a regression in the Makefile's configuration of python support; rather than gracefully disable support when the relevant executables cannot be found according to default values, the build process halts in error as though the user explicitly supplied the values. This new commit simply reverts the offending one-line change. Reported-by: NPekka Enberg <penberg@kernel.org> Link: http://lkml.kernel.org/r/CAOJsxLHv17Ys3M7P5q25imkUxQW6LE_vABxh1N3Tt7Mv6Ho4iw@mail.gmail.comSigned-off-by: NMichael Witten <mfwitten@gmail.com>
-
- 09 7月, 2013 20 次提交
-
-
由 Robert Richter 提交于
The tag of the perf version is wrongly determined, always the latest tag is taken regardless of the HEAD commit: $ perf --version perf version 3.9.rc8.gd7f5d3 $ git describe d7f5d3 v3.9-rc7-154-gd7f5d33 $ head -n 4 Makefile VERSION = 3 PATCHLEVEL = 9 SUBLEVEL = 0 EXTRAVERSION = -rc7 In other cases no tag might be found. This patch fixes this. This new implementation handles also the case if there are no tags at all found in the git repo but there is a commit id. Signed-off-by: NRobert Richter <robert.richter@calxeda.com> Link: http://lkml.kernel.org/r/1368006214-12912-1-git-send-email-rric@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Stephane Eranian 提交于
This patch fixes a problem reported by Andi Kleen on perf stat when measuring uncore events: # perf stat --per-socket -e uncore_pcu/event=0x0/ -I1000 -a sleep 2 It would not report counts for the second socket. That was due to a cpu mapping bug in print_aggr(). This patch also fixes the socket numbering bug for <not counted> events. Reported-by: NAndi Kleen <ak@linux.intel.com> Signed-off-by: NStephane Eranian <eranian@google.com> Tested-by: NAndi Kleen <ak@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: zheng.z.yan@intel.com Link: http://lkml.kernel.org/r/20130705170645.GA32519@quadSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Waiman Long 提交于
When "perf record" was used on a large machine with a lot of CPUs, the perf post-processing time (the time after the workload was done until the perf command itself exited) could take a lot of minutes and even hours depending on how large the resulting perf.data file was. While running AIM7 1500-user high_systime workload on a 80-core x86-64 system with a 3.9 kernel (with only the -s -a options used), the workload itself took about 2 minutes to run and the perf.data file had a size of 1108.746 MB. However, the post-processing step took more than 10 minutes. With a gprof-profiled perf binary, the time spent by perf was as follows: % cumulative self self total time seconds seconds calls s/call s/call name 96.90 822.10 822.10 192156 0.00 0.00 dsos__find 0.81 828.96 6.86 172089958 0.00 0.00 rb_next 0.41 832.44 3.48 48539289 0.00 0.00 rb_erase So 97% (822 seconds) of the time was spent in a single dsos_find() function. After analyzing the call-graph data below: ----------------------------------------------- 0.00 822.12 192156/192156 map__new [6] [7] 96.9 0.00 822.12 192156 vdso__dso_findnew [7] 822.10 0.00 192156/192156 dsos__find [8] 0.01 0.00 192156/192156 dsos__add [62] 0.01 0.00 192156/192366 dso__new [61] 0.00 0.00 1/45282525 memdup [31] 0.00 0.00 192156/192230 dso__set_long_name [91] ----------------------------------------------- 822.10 0.00 192156/192156 vdso__dso_findnew [7] [8] 96.9 822.10 0.00 192156 dsos__find [8] ----------------------------------------------- It was found that the vdso__dso_findnew() function failed to locate VDSO__MAP_NAME ("[vdso]") in the dso list and have to insert a new entry at the end for 192156 times. This problem is due to the fact that there are 2 types of name in the dso entry - short name and long name. The initial dso__new() adds "[vdso]" to both the short and long names. After that, vdso__dso_findnew() modifies the long name to something like /tmp/perf-vdso.so-NoXkDj. The dsos__find() function only compares the long name. As a result, the same vdso entry is duplicated many time in the dso list. This bug increases memory consumption as well as slows the symbol processing time to a crawl. To resolve this problem, the dsos__find() function interface was modified to enable searching either the long name or the short name. The vdso__dso_findnew() will now search only the short name while the other call sites search for the long name as before. With this change, the cpu time of perf was reduced from 848.38s to 15.77s and dsos__find() only accounted for 0.06% of the total time. 0.06 15.73 0.01 192151 0.00 0.00 dsos__find Signed-off-by: NWaiman Long <Waiman.Long@hp.com> Acked-by: NIngo Molnar <mingo@kernel.org> Cc: "Chandramouleeswaran, Aswin" <aswin@hp.com> Cc: "Norton, Scott J" <scott.norton@hp.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1368110568-64714-1-git-send-email-Waiman.Long@hp.com [ replaced TRUE/FALSE with stdbool.h equivalents, fixing builds where those macros are not present (NO_LIBPYTHON=1 NO_LIBPERL=1), fix from Jiri Olsa ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
The final sample format bit used to be PERF_SAMPLE_STACK_USER which neglected to do a final increment of the array pointer. The result is that the following parsing might start at the wrong place. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1372944040-32690-16-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1372944040-32690-11-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
On the error path, newly allocated 'term' must be freed. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Acked-by: NJiri Olsa <jolsa@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1372944040-32690-6-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
On the error path, 'data.terms' may not have been initialised. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Acked-by: NJiri Olsa <jolsa@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1372944040-32690-5-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 David Ahern 提交于
per realloc above the length of the buffer is alloc_size, not BUFSIZ. Adjust length per size as done for buf start. Addresses some valgrind complaints: ==1870== Syscall param read(buf) points to unaddressable byte(s) ==1870== at 0x4E3F610: __read_nocancel (in /lib64/libpthread-2.14.90.so) ==1870== by 0x44AEE1: event_format__new (unistd.h:45) ==1870== by 0x44B025: perf_evsel__newtp (evsel.c:158) ==1870== by 0x451919: add_tracepoint_event (parse-events.c:395) ==1870== by 0x479815: parse_events_parse (parse-events.y:292) ==1870== by 0x45463A: parse_events_option (parse-events.c:861) ==1870== by 0x44FEE4: get_value (parse-options.c:113) ==1870== by 0x450767: parse_options_step (parse-options.c:192) ==1870== by 0x450C40: parse_options (parse-options.c:422) ==1870== by 0x42735F: cmd_record (builtin-record.c:918) ==1870== by 0x419D72: run_builtin (perf.c:319) ==1870== by 0x4195F2: main (perf.c:376) ==1870== Address 0xcffebf0 is 0 bytes after a block of size 8,192 alloc'd ==1870== at 0x4C2A62F: malloc (vg_replace_malloc.c:270) ==1870== by 0x4C2A7A3: realloc (vg_replace_malloc.c:662) ==1870== by 0x44AF07: event_format__new (evsel.c:121) ==1870== by 0x44B025: perf_evsel__newtp (evsel.c:158) ==1870== by 0x451919: add_tracepoint_event (parse-events.c:395) ==1870== by 0x479815: parse_events_parse (parse-events.y:292) ==1870== by 0x45463A: parse_events_option (parse-events.c:861) ==1870== by 0x44FEE4: get_value (parse-options.c:113) ==1870== by 0x450767: parse_options_step (parse-options.c:192) ==1870== by 0x450C40: parse_options (parse-options.c:422) ==1870== by 0x42735F: cmd_record (builtin-record.c:918) ==1870== by 0x419D72: run_builtin (perf.c:319) Signed-off-by: NDavid Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1372793245-4136-2-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Runzhen Wang 提交于
In the Power7 PMU guide: https://www.power.org/documentation/commonly-used-metrics-for-performance-analysis/ PM_BRU_MPRED is referred to as PM_BR_MPRED. It fixed the typo by changing the name of the event in kernel and documentation accordingly. This patch changes the ABI, there are some reasons I think it's ok: - It is relatively new interface, specific to the Power7 platform. - No tools that we know of actually use this interface at this point (none are listed near the interface). - Users of this interface (eg oprofile users migrating to perf) would be more used to the "PM_BR_MPRED" rather than "PM_BRU_MPRED". - These are in the ABI/testing at this point rather than ABI/stable, so hoping we have some wiggle room. Signed-off-by: NRunzhen Wang <runzhen@linux.vnet.ibm.com> Acked-by: NMichael Ellerman <michael@ellerman.id.au> Cc: icycoder@gmail.com Cc: linuxppc-dev@lists.ozlabs.org Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Runzhen Wang <runzhew@clemson.edu> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1372407297-6996-2-git-send-email-runzhen@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
Currently we have symbol_conf.exclude_other being set as true every time so the -x/--exclude-other has nothing to do. Also we have no way to see the data with symbol_conf.exclude_other being false which is useful sometimes. Fixing it by making symbol_conf.exclude_other false by default. 1) Example without -x option: $ perf report -i perf.data.delete -p perf_session__delete -s parent + 99.91% [other] + 0.08% perf_session__delete + 0.00% perf_session__delete_dead_threads + 0.00% perf_session__delete_threads 2) Example with -x option: $ ./perf report -i perf.data.delete -p perf_session__delete -s parent -x + 96.22% perf_session__delete + 1.89% perf_session__delete_dead_threads + 1.89% perf_session__delete_threads In Example 1) we get the sorted out data together with the rest "[other]". This could help us estimate how much time we spent in the sorted data. In Example 2) the total is just the sorted data. Signed-off-by: NJiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-sg8fvu0fyqohf9ur9l38lhkw@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Namhyung Kim 提交于
When perf tries to start a workload, it relies on a pipe which the workload was blocked for reading. After closing the pipe on the parent, the workload (child) can start the actual work via exec(). However, if another process was forked after creating a workload, this mechanism cannot work since the other process (child) also inherits the pipe, so that closing the pipe in parent cannot unblock the workload. Fix it by using explicit write call can then closing it. For similar reason, the pipe fd on parent should be marked as CLOEXEC so that it can be closed after another child exec'ed. Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1372230862-15861-13-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
It no longer have any affect on the processing and is marked as obsolete anyway. Signed-off-by: NJiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-tvwyspiqr4getzfib2lw06ty@git.kernel.org Link: http://lkml.kernel.org/r/1372307120-737-1-git-send-email-namhyung@kernel.org [ combined patch removing the -f usage in various sub-commands, such as 'perf sched', etc, by Namhyung Kim ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
It's no longer working and needed. Quite straightforward discussion/vote was in here: http://marc.info/?t=137028288300004&r=1&w=2Signed-off-by: NJiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-8fgdva12hl8w3xzzpsvvg7nx@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Stephane Eranian 提交于
This patch fixes a problem with perf stat whereby on termination it may send a SIGTERM signal to random processes on systems with high PID recycling. I got some actual bug reports on this. There is race between the SIGCHLD and sig_atexit() handlers. This patch addresses this problem by clearing child_pid in the SIGCHLD handler. Signed-off-by: NStephane Eranian <eranian@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20130604154426.GA2928@quadSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Joonsoo Kim 提交于
Currently, lib lk doesn't use CROSS_COMPILE environment variable, so cross build always fails. This is a quick fix for this problem. Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1371603750-15053-2-git-send-email-iamjoonsoo.kim@lge.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Joonsoo Kim 提交于
Building perf for android fails because it can't find the definition of struct winsize. This definition is in termios.h, so I add this header to util.h to solve the problem. It is missed by commit '2c803e52' which moves get_term_dimensions() from builtin-top.c to util.c, but missed to move termios.h header. Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: NDavid Ahern <dsahern@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1371603750-15053-3-git-send-email-iamjoonsoo.kim@lge.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Kirill A. Shutemov 提交于
Addresses of allocated memory areas saved to '*src' and '*dst', so we need to check them for NULL, not 'src' and 'dst'. Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: NHitoshi Mitake <mitake.hitoshi@lab.ntt.co.jp> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1370518503-4230-1-git-send-email-kirill.shutemov@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Robert Richter 提交于
Fixing build errors with O and DESTDIR make vars set: $ make prefix=/usr/local O=$builddir DESTDIR=$destdir -C tools/ perf ... make[1]: Entering directory `.../.source/perf/tools/perf' CC .../.build/perf/perf/util/parse-events.o util/parse-events.c:14:32: fatal error: parse-events-bison.h: No such file or directory compilation terminated. make[1]: *** [.../.build/perf/perf/util/parse-events.o] Error 1 ... and: LINK /.../.build/perf/perf/perf gcc: error: /.../.build/perf/perf//.../.source/perf/tools/lib/lk/liblk.a: No such file or directory Signed-off-by: NRobert Richter <robert.richter@linaro.org> Signed-off-by: NRobert Richter <rric@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Robert Richter <rric@kernel.org> Link: http://lkml.kernel.org/r/1370964158-4135-1-git-send-email-rric@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Robert Richter 提交于
The OUTPUT directory is wrongly determind leading to: make[3]: *** No rule to make target `.../.build/perf/PERF-VERSION-FILE'. Stop. Fixing this by using the generic approach in script/Makefile.include. Signed-off-by: NRobert Richter <robert.richter@calxeda.com> Link: http://lkml.kernel.org/r/1367865614-30876-1-git-send-email-rric@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Robert Richter 提交于
Fix having verbose build with V=0, e.g: make V=0 -C tools/ perf Signed-off-by: NRobert Richter <robert.richter@calxeda.com> Link: http://lkml.kernel.org/r/20130503134953.GU8356@rric.localhostSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 05 7月, 2013 2 次提交
-
-
由 Stephane Eranian 提交于
This patch fixes a serious bug in: 14c63f17 perf: Drop sample rate when sampling is too slow There was an misunderstanding on the API of the do_div() macro. It returns the remainder of the division and this was not what the function expected leading to disabling the interrupt latency watchdog. This patch also remove a duplicate assignment in perf_sample_event_took(). Signed-off-by: NStephane Eranian <eranian@google.com> Cc: peterz@infradead.org Cc: dave.hansen@linux.intel.com Cc: ak@linux.intel.com Cc: jolsa@redhat.com Link: http://lkml.kernel.org/r/20130704223010.GA30625@quadSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Peter Zijlstra 提交于
As Linus said its not an error to not have an AMD IOMMU; esp. when you're not even running on an AMD platform. Reported-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Acked-by: NSuravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Link: http://lkml.kernel.org/r/20130703075542.GF23916@twins.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 03 7月, 2013 10 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 UV update from Ingo Molnar: "There's a single commit in this tree, which adds support for a new SGI UV GRU (Global Reference Unit - fast NUMA messaging ASIC) hardware feature to scale up and beyond: an optional distributed mode that will allow per-node address mapping of local GRU space, as opposed to mapping all GRU hardware to the same contiguous high space" * 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/UV: Add GRU distributed mode mappings
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 tracing updates from Ingo Molnar: "This tree adds IRQ vector tracepoints that are named after the handler and which output the vector #, based on a zero-overhead approach that relies on changing the IDT entries, by Seiji Aguchi. The new tracepoints look like this: # perf list | grep -i irq_vector irq_vectors:local_timer_entry [Tracepoint event] irq_vectors:local_timer_exit [Tracepoint event] irq_vectors:reschedule_entry [Tracepoint event] irq_vectors:reschedule_exit [Tracepoint event] irq_vectors:spurious_apic_entry [Tracepoint event] irq_vectors:spurious_apic_exit [Tracepoint event] irq_vectors:error_apic_entry [Tracepoint event] irq_vectors:error_apic_exit [Tracepoint event] [...]" * 'x86-tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tracing: Add config option checking to the definitions of mce handlers trace,x86: Do not call local_irq_save() in load_current_idt() trace,x86: Move creation of irq tracepoints from apic.c to irq.c x86, trace: Add irq vector tracepoints x86: Rename variables for debugging x86, trace: Introduce entering/exiting_irq() tracing: Add DEFINE_EVENT_FN() macro
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 RAS update from Ingo Molnar: "The changes in this tree are: - ACPI APEI (ACPI Platform Error Interface) improvements, by Chen Gong - misc MCE fixes/cleanups" * 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Update MCE severity condition check mce: acpi/apei: Add comments to clarify usage of the various bitfields in the MCA subsystem ACPI/APEI: Update einj documentation for param1/param2 ACPI/APEI: Add parameter check before error injection ACPI, APEI, EINJ: Fix error return code in einj_init() x86, mce: Fix "braodcast" typo
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 platform updates from Ingo Molnar: "Two changes: - A Kconfig dependency fix/cleanup - Introduce the 'make kvmconfig' KVM configuration helper utility that turns the current .config into a KVM-bootable config. Useful for debugging specific native kernel configs that have no KVM config options enabled on VM setups." * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/platform: Make X86_GOLDFISH depend on X86_EXTENDED_PLATFORM x86/platform: Add kvmconfig to the phony targets x86, platform, kvm, kconfig: Turn existing .config's into KVM-capable configs
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 mm changes from Ingo Molnar: "Misc improvements: - Fix /proc/mtrr reporting - Fix ioremap printout - Remove the unused pvclock fixmap entry on 32-bit - misc cleanups" * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ioremap: Correct function name output x86: Fix /proc/mtrr with base/size more than 44bits ix86: Don't waste fixmap entries x86/mm: Drop unneeded include <asm/*pgtable, page*_types.h> x86_64: Correct phys_addr in cleanup_highmap comment
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 microcode loading update from Ingo Molnar: "Two main changes that improve microcode loading on AMD CPUs: - Add support for all-in-one binary microcode files that concatenate the microcode images of multiple processor families, by Jacob Shin - Add early microcode loading (embedded in the initrd) support, also by Jacob Shin" * 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, microcode, amd: Another early loading fixup x86, microcode, amd: Allow multiple families' bin files appended together x86, microcode, amd: Make find_ucode_in_initrd() __init x86, microcode, amd: Fix warnings and errors on with CONFIG_MICROCODE=m x86, microcode, amd: Early microcode patch loading support for AMD x86, microcode, amd: Refactor functions to prepare for early loading x86, microcode: Vendor abstract out save_microcode_in_initrd() x86, microcode, intel: Correct typo in printk
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 FPU changes from Ingo Molnar: "There are two bigger changes in this tree: - Add an [early-use-]safe static_cpu_has() variant and other robustness improvements, including the new X86_DEBUG_STATIC_CPU_HAS configurable debugging facility, motivated by recent obscure FPU code bugs, by Borislav Petkov - Reimplement FPU detection code in C and drop the old asm code, by Peter Anvin." * 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, fpu: Use static_cpu_has_safe before alternatives x86: Add a static_cpu_has_safe variant x86: Sanity-check static_cpu_has usage x86, cpu: Add a synthetic, always true, cpu feature x86: Get rid of ->hard_math and all the FPU asm fu
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 EFI changes from Ingo Molnar: "Two fixes that should in principle increase robustness of our interaction with the EFI firmware, and a cleanup" * 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, efi: retry ExitBootServices() on failure efi: Convert runtime services function ptrs UEFI: Don't pass boot services regions to SetVirtualAddressMap()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 debug update from Ingo Molnar: "Misc debuggability improvements: - Optimize the x86 CPU register printout a bit - Expose the tboot TXT log via debugfs - Small do_debug() cleanup" * 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tboot: Provide debugfs interfaces to access TXT log x86: Remove weird PTR_ERR() in do_debug x86/debug: Only print out DR registers if they are not power-on defaults
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 cpu updates from Ingo Molnar: "Two changes: - Extend 32-bit double fault debugging aid to 64-bit - Fix a build warning" * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/intel/cacheinfo: Shut up last long-standing warning x86: Extend #DF debugging aid to 64-bit
-