It adds the core definitions and low-level debug uart support
for imx6q.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Now that the DEBUG_LL UART can be selected by a Kconfig choice,
simplify the #ifdefery in debug-macro.S and add entries to the
top-level Kconfig.debug instead.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

Signed-off-by: NRichard Zhu <richard.zhu@linaro.org>
Tested-by: NHector Oron Martinez <hector.oron@gmail.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

This patch adds an ioremap hook imx_ioremap to be called in
__imx_ioremap().  Any soc that needs a customized ioremap other
than __arm_ioremap() can set up this hook in soc specific call.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

This patch adds an idle hook imx_idle to be called in arch_idle().
Any soc that needs a customized idle implementation other than
cpu_do_idle() can set up this hook in soc specific call.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Some platforms (like OMAP not to name it) are doing rather complicated
hacks just to determine the base UART address to use.  Let's give their
addruart macro some slack by providing an extra work register which will
allow for much needed cleanups.

This is basically a no-op as this commit is only adding the extra argument
to the macro but no one is using it yet.
Signed-off-by: Nnicolas Pitre <nicolas.pitre@linaro.org>
Reviewed-by: NKevin Hilman <khilman@ti.com>

Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

This fix the mx25 building issue of no IIM base definition
Signed-off-by: NJason Liu <jason.hui@linaro.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

This patch add poweroff support on mx31moboard platform.
A watchdog timeout is generated while enabling the watchdog
reset IO to trigger a PMIC poweroff.
Signed-off-by: NPhilippe Rétornaz <philippe.retornaz@epfl.ch>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Use a static mapping for TZIC to get rid of the duplicated code for
ioremap and the corresponding error handling. This is already done on
i.MX50.

This patch also removes TZIC mapping for i.mx51 TO1 since
there is no support for TO1 now since the following commit:
9ab4650f (ARM: imx: Get the silicon version from the IIM module)
Signed-off-by: NJason Liu <jason.hui@linaro.org>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

MX51_DEBUG related mapping is dead code, no-one uses it
Signed-off-by: NJason Liu <jason.hui@linaro.org>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

update to use generic function for displaying silicon revision
Signed-off-by: NJason Liu <jason.hui@linaro.org>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Update to use generic function for displaying silicon revision

Tested on mx31pdk board as print the following information:
CPU identified as i.MX31, silicon rev 2.0
Signed-off-by: NJason Liu <jason.hui@linaro.org>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Silicon revision is useful information to have during kernel boot.
Print the MX25 silicon revision.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NJason Liu <jason.hui@linaro.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Currently each i.MX processor has its own function for displaying the silicon
revision.

Introduce a generic function for this purpose, so that all i.MX processors can
reuse it.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NJason Liu <jason.hui@linaro.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

MX27/31/35/53 also have PATA block.

Add PATA resources for them.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

For this we need CONFIG_AUTO_ZRELADDR and CONFIG_ARM_PATCH_PHYS_VIRT.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

For this we need CONFIG_AUTO_ZRELADDR and CONFIG_ARM_PATCH_PHYS_VIRT.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Declare the pata device found on mx51
Signed-off-by: NArnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

All in-tree MX boards using video use memblock_* functions to get their
coherent dma space for the camera. So there is no need to increase
CONSISTENT_DMA_SIZE beyond the default 2MB and we can simply remove the
defines which do this.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Acked-by: NSascha Hauer <s.hauer@pengutronix.de>

Delete about 1,000 symbols used only once

I used the following script to clean up the file.

cp iomux-mx53.h iomux-mx53.h.cpy

sed -n iomux-mx53.h.cpy \
-e 's/#define[ \x09]\+\(_MX5[0-9a-zA-Z_]*\)[ \x09]\+\(.\+\)/s@\1@\2@g/p' >t.tmp

sed iomux-mx53.h.cpy \
-e '/define[ \x09]\+_MX5/d' \
-f t.tmp \
-e 's/,[ \x09]*\([^,]\+\)/, \1/g' \
-e 's/, 0)[ \x09]*|[ \x09]*MUX_PAD_CTRL(/, /' \
-e 's/(IOMUX_PAD(\(.*\)))/IOMUX_PAD(\1)/' \
-e 's/0x\([0-9a-fA-F]\{2\}\)[ \x09]*,/0x0\1,/' \
-e 's/NON_PAD_I/__NA_/' \
-e 's/0x0,/__NA_,/' \
-e 's/#define[ \x09]\+\(MX5[0-9a-zA-Z_]*\)[ \x09]\+\(IOMUX_PAD.\+\)/#define \1\x09\2/' \
-e 's/\(#define MX5[^\x09]\{5,12\}\)\x09\(IOMUX_PAD.\+\)/\1\x09\x09\x09\x09\x09\2/' \
-e 's/\(#define MX5[^\x09]\{13,20\}\)\x09\(IOMUX_PAD.\+\)/\1\x09\x09\x09\x09\2/' \
-e 's/\(#define MX5[^\x09]\{21,28\}\)\x09\(IOMUX_PAD.\+\)/\1\x09\x09\x09\2/' \
-e 's/\(#define MX5[^\x09]\{29,36\}\)\x09\(IOMUX_PAD.\+\)/\1\x09\x09\2/' \
-e 's/\(#define MX5[^\x09]\{45,\}\)\x09\(IOMUX_PAD.\+\)/\1\x09\\\n\x09\x09\x09\x09\x09\x09\x09\2/' \
-e 's/, IOMUX_CONFIG_SION,/, 0 | IOMUX_CONFIG_SION,/' >iomux-mx53.h
Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Delete about 700 used only once symbols.

I used the following script to clean up the file,
iomux-mx51.h.

cp iomux-mx51.h iomux-mx51.h.cpy

sed -n iomux-mx51.h.cpy \
-e 's/#define[ \x09]\+\(_MX5[0-9a-zA-Z_]*\)[ \x09]\+\(.\+\)/s@\1@\2@g/p' >t.tmp

sed iomux-mx51.h.cpy \
-e '/define[ \x09]\+_MX5/d' \
-f t.tmp \
-e 's/,[ \x09]*\([^,]\+\)/, \1/g' \
-e 's/, 0)[ \x09]*|[ \x09]*MUX_PAD_CTRL(/, /' \
-e 's/(IOMUX_PAD(\(.*\)))/IOMUX_PAD(\1)/' \
-e 's/0x\([0-9a-fA-F]\{2\}\)[ \x09]*,/0x0\1,/' \
-e 's/0x0\([0-9a-fA-F]\{3\}\)[ \x09]*,/0x\1,/' \
-e '/#include <mach\/iomux-v3.h/ a#define __NA_\x090x000\n' \
-e 's/0x[0]\{1,3\},/__NA_,/' \
-e 's/#define[ \x09]\+\(MX5[0-9a-zA-Z_]*\)[ \x09]\+\(IOMUX_PAD.\+\)/#define \1\x09\2/' \
-e 's/\(#define MX5[^\x09]\{5,12\}\)\x09\(IOMUX_PAD.\+\)/\1\x09\x09\x09\x09\2/' \
-e 's/\(#define MX5[^\x09]\{13,20\}\)\x09\(IOMUX_PAD.\+\)/\1\x09\x09\x09\2/' \
-e 's/\(#define MX5[^\x09]\{21,28\}\)\x09\(IOMUX_PAD.\+\)/\1\x09\x09\2/' \
-e 's/\(#define MX5[^\x09]\{29,36\}\)\x09\(IOMUX_PAD.\+\)/\1\x09\2/' \
-e 's/\(#define MX5[^\x09]\{45,\}\)\x09\(IOMUX_PAD.\+\)/\1\x09\\\n\x09\x09\x09\x09\x09\x09\2/' \
-e 's/, IOMUX_CONFIG_SION,/, 0 | IOMUX_CONFIG_SION,/' \
-e 's/\((0x[0-9a-fA-F]*, 0x[0-9a-fA-F]*, \)0x0\([0-9a-fA-F]\{2\},\)/\10x\2/' >iomux-mx51.h
Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Use new macro NEW_PAD_CTRL to remove _MX51_PAD_xxx references.
A later patch will remove the _MX51_PAD_xxx symbols.
Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

The patch moves IMX_GPIO_NR into mach/hardware.h, so that we only
use standard gpiolib helpers in mach/gpio.h.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

As irq_to_gpio() is only being used by gpio-mxc driver, it should be
moved from mach/gpio.h into gpio-mxc.c.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

As all the users of gpio_to_irq() in static initializers have been
migrated to IMX_GPIO_TO_IRQ, we can start using the standard gpiolib
helper for gpio_to_irq().
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

The patch defines IMX_GPIO_TO_IRQ() in mach/hardware.h and replaces
all the uses of gpio_to_irq() in static initializers with
IMX_GPIO_TO_IRQ().
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Commit fad10708 fixed the wrong test for MX51
as the MX51 addresses are wrong for MX50 and MX53 but now it's MX51 only,
UART_PADDR is not defined anymore when building for MX50/MX53.
Signed-off-by: NArnaud Patard <arnaud.patard@rtp-net.org>
Tested-by: NSteev Klimaszewski <steev@genesi-usa.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Additionally make the usb related defines consistent with the other imx
SoCs.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

It might be not good to use software defined version to identify sdma
device type, when hardware does not define such version.  Instead,
soc name is stable enough to define the device type.

The patch uses platform_device_id rather than version number passed
by platform data to identify sdma device type/version.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NVinod Koul <vinod.koul@intel.com>

The patch removes all the uses of cpu_is_mx().  Instead, it utilizes
platform_device_id to distinguish the esdhc differences among SoCs.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Cc: Chris Ball <cjb@laptop.org>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NChris Ball <cjb@laptop.org>

The patch extends card_detect and write_protect support to get mx5
family and more scenarios supported.  The changes include:

 * Turn platform_data from optional to mandatory
 * Add cd_types and wp_types into platform_data to cover more use
   cases
 * Remove the use of flag ESDHC_FLAG_GPIO_FOR_CD
 * Adjust some machine codes to adopt the platform_data changes
 * Work around the issue that software reset will get card detection
   circuit stop working

With this patch, card_detect and write_protect gets supported on
mx5 based platforms.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Cc: Chris Ball <cjb@laptop.org>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>
Tested-by: NArnaud Patard <arnaud.patard@rtp-net.org>
Acked-by: NChris Ball <cjb@laptop.org>

On the recent i.mx (mx25/50/53), there is a gasket inside fec
controller which needs to be enabled no matter phy works in MII
or RMII mode.

The current code enables the gasket only when phy interface is RMII.
It's broken when the driver works with a MII phy.  The patch uses
platform_device_id to distinguish the SoCs that have the gasket and
enables it on these SoCs for both MII and RMII mode.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Reported-by: NTroy Kisky <troy.kisky@boundarydevices.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: NDavid S. Miller <davem@davemloft.net>

I2C signals SDA/SCL are a bit different, they need to be pull-up and
open-drain (so to support multiple I2C devices).
Signed-off-by: NRichard Zhao <richard.zhao@linaro.org>
Signed-off-by: NEric Miao <eric.miao@linaro.org>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Now most of ARM machines has the alsmot same __clk_get/put() macro

So place it at the arch/arm/include/asm/clkdev.h and remove the reduntant header files

But some machines don't have the same form as above. It can use the machince specific clkdev file by HAVE_MACH_CLKDEV config

Now there are only 3 caese.

1) define the clk structure with clkdev macro => Need to move clk structure to proper header file

arch/arm/mach-versatile/include/mach/clkdev.h
arch/arm/mach-realview/include/mach/clkdev.h
arch/arm/mach-vexpress/include/mach/clkdev.h
arch/arm/mach-integrator/include/mach/clkdev.h

2) export the __clk_get/put function at clock.c

arch/arm/mach-shmobile/include/mach/clkdev.h

3) demuxing the clk source
arch/arm/mach-u300/include/mach/clkdev.h
Acked-by: NViresh Kumar <viresh.kumar@st.com>
Acked-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>