- 29 11月, 2006 2 次提交
-
-
由 Chris Wright 提交于
Make sure to properly clamp maxnum to avoid overflow Signed-off-by: NChris Wright <chrisw@sous-sol.org> Acked-by: NEugene Teo <eteo@redhat.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ingo Molnar 提交于
Commit 2c8c0e6b ("[PATCH] Convert x86-64 to early param") broke the earlyprintk=...,keep feature. This restores that functionality. Tested on x86_64. Must-have for v2.6.19, no risk. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 27 11月, 2006 4 次提交
-
-
由 Linus Torvalds 提交于
You wouldn't think that doing an ALIGN() macro that aligns something up to a power-of-two boundary would be likely to have bugs, would you? But hey, in the wonderful world of mixing integer types, you have to be careful. This just makes sure that the alignment is interpreted in the same type as the thing to be aligned. Thanks to Roland Dreier, who noticed that the amso1100 driver got broken by the previous fix (that just extended the mask to "unsigned long", but was still broken in "unsigned long long" - it just happened to be the same on 64-bit architectures). See commit 4c8bd7ee for the history of bugs here... Acked-by: NRoland Dreier <rdreier@cisco.com> Cc: Andrew Morton <akpm@osdl.org> Cc: David Miller <davem@davemloft.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kyle McMartin 提交于
I still think using BUILD_BUG_ON() is unacceptable, especially given how vague the error message was. Signed-off-by: NKyle McMartin <kyle@parisc-linux.org> [ And I already removed gthe BUILD_BUG_ON() in the previous commit ] Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
This reverts commit ee3ce191, since it broke on at least ARM, MIPS and PA-RISC due to complicated header file dependencies. Conflicts in include/linux/spinlock.h (due to the "nested" variety fixes) fixed up by hand. Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Kyle McMartin <kyle@parisc-linux.org> Cc: Russell King <rmk+lkml@arm.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [XFRM] STATE: Fix to respond error to get operation if no matching entry exists. [NET]: Re-fix of doc-comment in sock.h [6PACK]: Masking bug in 6pack driver. [NET]: Fix kfifo_alloc() error check. [UDP]: Make udp_encap_rcv use pskb_may_pull [NETFILTER]: H.323 conntrack: fix crash with CONFIG_IP_NF_CT_ACCT
-
- 26 11月, 2006 33 次提交
-
-
由 Andrew de Quincey 提交于
The tda10086 causes an oops (divide by zero) if a zero symbol rate is used; this prevents this. Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hans Verkuil 提交于
The old code would accept any device on the same i2c address as the saa711x chips as an saa711x. However, this fails with saa717x chips, which use that same address and so are misdetected as a saa7111. Now check whether the chip is really a saa711x model. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Luca Risolia 提交于
The patch fix bug 5748. Signed-off-by: NLuca Risolia <luca.risolia@studio.unibo.it> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Ira Snyder 提交于
Sparse noticed a lock imbalance in read_from_buf(). Further inspection shows that the lock should not be held when the function exits. This adds a spin_unlock_irqrestore(), so that every exit path of the read_from_buf() function is consistent. The unlock was missing on an error path. Signed-off-by: NIra W. Snyder <devel@irasnyder.com> Signed-off-by: NHans J. Koch <koch@hjk-az.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Andrew de Quincey 提交于
Spotted by coverity/Adrian Bunk. Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Oliver Endriss 提交于
New module parameter diseqc_method for cards with subsystem-id 13c2:1003. - 0: unreliable method, can be used by all board revisions (default) - 1: reliable method, works for newer board layouts only The parameter has no effect for cards with other subsystem-ids. Signed-off-by: NOliver Endriss <o.endriss@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Andrew de Quincey 提交于
Fixes to DISEQC on these cards inadvertently broke normal tone/voltage signalling. This restores the necessary function. Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Masahide NAKAMURA 提交于
When application uses XFRM_MSG_GETSA to get state entry through netlink socket and kernel has no matching one, the application expects reply message with error status by kernel. Kernel doesn't send the message back in the case of Mobile IPv6 route optimization protocols (i.e. routing header or destination options header). This is caused by incorrect return code "0" from net/xfrm/xfrm_user.c(xfrm_user_state_lookup) and it makes kernel skip to acknowledge at net/netlink/af_netlink.c(netlink_rcv_skb). This patch fix to reply ESRCH to application. Signed-off-by: NMasahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: NTAKAMIYA Noriaki <takamiya@po.ntts.co.jp> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Bonser 提交于
Restoring old, correct comment for sk_filter_release, moving it to where it should actually be, and changing new comment into proper comment for sk_filter_rcu_free, where it actually makes sense. The original fix submitted for this on Oct 23 mistakenly documented the wrong function. Signed-off-by: NPaul Bonser <misterpib@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jean Delvare 提交于
Looks like a broken masking to me, binary not is used where bitwise not was intended. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Akinobu Mita 提交于
The return value of kfifo_alloc() should be checked by IS_ERR(). Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Olaf Kirch 提交于
Make udp_encap_rcv use pskb_may_pull IPsec with NAT-T breaks on some notebooks using the latest e1000 chipset, when header split is enabled. When receiving sufficiently large packets, the driver puts everything up to and including the UDP header into the header portion of the skb, and the rest goes into the paged part. udp_encap_rcv forgets to use pskb_may_pull, and fails to decapsulate it. Instead, it passes it up it to the IKE daemon. Signed-off-by: NOlaf Kirch <okir@suse.de> Signed-off-by: NJean Delvare <jdelvare@suse.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Faidon Liambotis 提交于
H.323 connection tracking code calls ip_ct_refresh_acct() when processing RCFs and URQs but passes NULL as the skb. When CONFIG_IP_NF_CT_ACCT is enabled, the connection tracking core tries to derefence the skb, which results in an obvious panic. A similar fix was applied on the SIP connection tracking code some time ago. Signed-off-by: NFaidon Liambotis <paravoid@debian.org> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Reimplement execvp for our purposes - after we call fork() it is fundamentally unsafe to use the kernel allocator - current is not valid there. So we simply pass to our modified execvp() a preallocated buffer. This fixes a real bug and works very well in testing (I've seen indirectly warning messages from the forked thread - they went on the pipe connected to its stdout and where read as a number by UML, when calling read_output(). I verified the obtained number corresponded to "BUG:"). The added use of __cant_sleep() is not a new bug since __cant_sleep() is already used in the same function - passing an atomicity parameter would be better but it would require huge change, stating that this function must not be called in atomic context and can sleep is a better idea (will make sure of this gradually). Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Acked-by: NJeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mariusz Kozlowski 提交于
This is a bug. When checking for ati_remote->outbuf we free freeing ati_remote->inbuf so we end up freeing ati_remote->inbuf twice. Also the checks for 'ati_remote->inbuf != NULL' and 'ati_remote->outbuf != NULL' are redundant as usb_buffer_free() does this. Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Acked-by: NGreg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Arjan van de Ven 提交于
Introduce spin_lock_irqsave_nested(); implementation from: http://lkml.org/lkml/2006/6/1/122 Patch from: http://lkml.org/lkml/2006/9/13/258 [akpm@osdl.org: two compile fixes] Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NJiri Kosina <jikos@jikos.cz> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alexey Dobriyan 提交于
Make it break or warn if you pass to spin_lock_irqsave() and friends something different from "unsigned long flags;". Suprisingly large amount of these was caught by recent commit c53421b1 and others. Idea is largely from FRV typechecking. Suggestions from Andrew Morton. All stupid typos in first version fixed. Passes allmodconfig on i386, x86_64, alpha, arm as well as my usual config. Note #1: checking with sparse is still needed, because a driver can save and pass around flags or something. So far patch is very intrusive. Note #2: techically, we should break only if sizeof(flags) < sizeof(unsigned long), however, the more pain for getting suspicious code into kernel, the better. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Akinobu Mita 提交于
The return value of platform_device_register_simple() should be checked by IS_ERR(). This patch also fix misc_register() error case. Because misc_register() returns error code. Cc: Sebastien Bouchard <sebastien.bouchard@ca.kontron.com> Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Akinobu Mita 提交于
The return value of copy_process() should be checked by IS_ERR(). Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeremy Higdon 提交于
This patch removes a module_exit function that sgiioc4 should not have had. It seems that the IDE layer doesn't support submodule unloading. sgiioc4 was the only driver in drivers/ide/pci that had an exit function. After an unload, the devices would stay around and the next attempt to reference would crash... Signed-off-by: NJeremy Higdon <jeremy@sgi.com> Acked-by: N"Bartlomiej Zolnierkiewicz" <bzolnier@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Roman Zippel 提交于
On Mon, 13 Nov 2006, Phil Oester wrote: > In commit 350b5b76, the default menuconfig > color scheme was changed to bluetitle. This breaks the highlighting > of the selected item for me with TERM=vt100. The only way I can see > which item is selected is via: > > make MENUCONFIG_COLOR=mono menuconfig > > Which restores the pre-2.6.19 white on black highlighting. Fix. Cc: Phil Oester <kernel@linuxace.com> Signed-off-by: NRoman Zippel <zippel@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Roman Zippel 提交于
Fixes a segfault reported by Randy. Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NRoman Zippel <zippel@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Catalin Marinas 提交于
dev->devt_attr is allocated in device_add() but it is never freed in device_del() in the drivers/base/core.c file (reported by kmemleak). Signed-off-by: NCatalin Marinas <catalin.marinas@gmail.com> Acked-by: NGreg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alexey Dobriyan 提交于
One reiserfs_warning() call uses %lu, but doesn't supply what to print. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
The correct order is: NULL check before dereference This was a guaranteed NULL dereference with debugging enabled since rs5c372_sysfs_show_osc() does actually pass NULL... Spotted by the Coverity checker. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Acked-by: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Brownell 提交于
I got a lockdep warning when running "rtctest" so I though it'd be good to see what was up. - The warning was for rtc->irq_task_lock, gotten from rtc_update_irq() by irq handlerss ... but in a handful of other cases, grabbed without blocking IRQs. - Some callers to rtc_update_irq() were not ensuring IRQs were blocked, yet the routine expects that; make sure all callers block IRQs. It would appear that RTC API tests haven't been part of anyone's kernel regression test suite recently, at least not with lockdep running. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Acked-by: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Brownell 提交于
The RTC framework has an irq_set_freq() method that should be used to manage the periodic IRQ frequency, but the current ioctl logic doesn't know how to do that. This patch teaches it how. This means that drivers implementing irq_set_freq() will automatically support RTC_IRQP_{READ,SET} ioctls; that logic doesn't need duplication within the driver. [akpm@osdl.org: export rtc_irq_set_freq] Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Acked-by: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Brownell 提交于
This updates the RTC documentation to summarize the two APIs now available: the old PC/AT one, and the new RTC class drivers. It also updates the included "rtctest.c" file to better meet Linux style guidelines, and to work with the new RTC drivers. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Acked-by: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
debugfs needs include/linux/kobject.h for <kernel_subsys>. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Vasily Tarasov 提交于
OpenVZ developers team has encountered the following problem in 2.6.19-rc6 kernel. After some seconds of running script while [[ 1 ]] do find /proc -name mountstats | xargs cat done this Oops appears: BUG: unable to handle kernel NULL pointer dereference at virtual address 00000010 printing eip: c01a6b70 *pde = 00000000 Oops: 0000 [#1] SMP Modules linked in: xt_length ipt_ttl xt_tcpmss ipt_TCPMSS iptable_mangle iptable_filter xt_multiport xt_limit ipt_tos ipt_REJECT ip_tables x_tables parport_pc lp parport sunrpc af_packet thermal processor fan button battery asus_acpi ac ohci_hcd ehci_hcd usbcore i2c_nforce2 i2c_core tg3 floppy pata_amd ide_cd cdrom sata_nv libata CPU: 1 EIP: 0060:[<c01a6b70>] Not tainted VLI EFLAGS: 00010246 (2.6.19-rc6 #2) EIP is at mountstats_open+0x70/0xf0 eax: 00000000 ebx: e6247030 ecx: e62470f8 edx: 00000000 esi: 00000000 edi: c01a6b00 ebp: c33b83c0 esp: f4105eb4 ds: 007b es: 007b ss: 0068 Process cat (pid: 6044, ti=f4105000 task=f4104a70 task.ti=f4105000) Stack: c33b83c0 c04ee940 f46a4a80 c33b83c0 e4df31b4 c01a6b00 f4105000 c0169231 e4df31b4 c33b83c0 c33b83c0 f4105f20 00000003 f4105000 c0169445 f2503cf0 f7f8c4c0 00008000 c33b83c0 00000000 00008000 c0169350 f4105f20 00008000 Call Trace: [<c01a6b00>] mountstats_open+0x0/0xf0 [<c0169231>] __dentry_open+0x181/0x250 [<c0169445>] nameidata_to_filp+0x35/0x50 [<c0169350>] do_filp_open+0x50/0x60 [<c01873d6>] seq_read+0xc6/0x300 [<c0169511>] get_unused_fd+0x31/0xc0 [<c01696d3>] do_sys_open+0x63/0x110 [<c01697a7>] sys_open+0x27/0x30 [<c01030bd>] sysenter_past_esp+0x56/0x79 ======================= Code: 45 74 8b 54 24 20 89 44 24 08 8b 42 f0 31 d2 e8 47 cb f8 ff 85 c0 89 c3 74 51 8d 80 a0 04 00 00 e8 46 06 2c 00 8b 83 48 04 00 00 <8b> 78 10 85 ff 74 03 f0 ff 07 b0 01 86 83 a0 04 00 00 f0 ff 4b EIP: [<c01a6b70>] mountstats_open+0x70/0xf0 SS:ESP 0068:f4105eb4 The problem is that task->nsproxy can be equal NULL for some time during task exit. This patch fixes the BUG. Signed-off-by: NVasily Tarasov <vtaras@openvz.org> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: "Serge E. Hallyn" <serue@us.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
Fix bug in certain error paths of lookup routines. The request object was reused for sending FORGET, which is illegal. This bug could cause an Oops in 2.6.18. In earlier versions it might silently corrupt memory, but this is very unlikely. These error paths are never triggered by libfuse, so this wasn't noticed even with the 2.6.18 kernel, only with a filesystem using the raw kernel interface. Thanks to Russ Cox for the bug report and test filesystem. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Thomas Chou 提交于
Fix bug 7401. Handle more than one source dir or file list to the initramfs gen scripts. The Kconfig help for INITRAMFS_SOURCE claims that you can specify multiple space-separated sources in order to allow unprivileged users to build an image. There are two bugs in the current implementation that prevent this from working. First, we pass "file1 dir2" to the gen_initramfs_list.sh script, which it obviously can't open. Second, gen_initramfs_list.sh -l outputs multiple definitions for deps_initramfs -- one for each argument. Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: NMatthew Wilcox <matthew@wil.cx> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Daniel Ritz 提交于
Add required locking to dfbc9e9dSigned-off-by: NDaniel Ritz <daniel.ritz@gmx.ch> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Pavol Gono <Palo.Gono@gmail.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 24 11月, 2006 1 次提交
-
-
由 Mel Gorman 提交于
find_min_pfn_for_node() and find_min_pfn_with_active_regions() both depend on a sorted early_node_map[]. However, sort_node_map() is being called after fin_min_pfn_with_active_regions() in free_area_init_nodes(). In most cases, this is ok, but on at least one x86_64, the SRAT table caused the E820 ranges to be registered out of order. This gave the wrong values for the min PFN range resulting in some pages not being initialised. This patch sorts the early_node_map in find_min_pfn_for_node(). It has been boot tested on x86, x86_64, ppc64 and ia64. Signed-off-by: NMel Gorman <mel@csn.ul.ie> Acked-by: NAndre Noll <maan@systemlinux.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-