The edp-24m clock has two possible sources: the 24MHz oscillator as well
as an external 27MHz input. The power-on-default is the 27MHz clock which
is not supplied on all Rockchip boards. While on all current boards and
also all Veyron Chromebooks the bootloader seems to adapt the muxing to
the internal source, this doesn't seem to be the case on headless veyron
devices like brain and mickey making the edp-24m clock an orphan.
On the hardware side the 27m input also is not connected at all.

With the upcoming deferral of orphan-clocks this results in the power-
domain code deferring, as it cannot request the needed clock and if the
synchronous reset is sucessfullat all in this case is also unknown.

So fix that by making sure, the edp-24m clock is muxed to the internal
24MHz oscillator at all times.
Signed-off-by: NHeiko Stuebner <heiko.stuebner@collabora.com>

According to a commit on the ChromeOS kernel, the temperature of the Speedy
surface is over skin temperature spec. So adjust the thermal settings
to mimic the ChromeOS tree to stay within these spec limits.
Signed-off-by: NHeiko Stuebner <heiko.stuebner@collabora.com>
Reviewed-by: NCaesar Wang <wxt@rock-chips.com>

In some cases the machine radiating is very poor,sometime the temperature
is rising very quickly on heavy loading.So we need have more frequent
polling and better granularity.
Signed-off-by: NCaesar Wang <wxt@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko.stuebner@collabora.com>

Add Crypto node for rk3288 including crypto controller and dma clk.
Signed-off-by: NZain Wang <zain.wang@rock-chips.com>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

Initial release for rk3036 sdk board.
Signed-off-by: NXing Zheng <zhengxing@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

Initial release for rk3036 shared dtsi.
Signed-off-by: NXing Zheng <zhengxing@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

Add support for the IR receiver as present on the Radxa Rock 2 Square
board.
Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

add playback and capture properties to compatible various chips.
Signed-off-by: NSugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

The act8846 on rock2 boards controls the system power, so add the
appropriate property to allow turning off the board.
Signed-off-by: NJohn Keeping <john@metanate.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

Add an ethernet0 alias for the RK3066/RK3188 mac interface so
that u-boot can find the device-node and fill in the mac address on
boards that support a wired network interface.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

Add an ethernet0 alias for the RK3288 mac interface so
that u-boot can find the device-node and fill in the mac address on
boards that support a wired network interface.
Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

cpu_relax() on ARC has been barrier only for SMP (and no-op for UP). Per
recent discussions, it is safer to make it a compiler barrier
unconditionally.

Link: http://lkml.kernel.org/r/53A7D3AA.9020100@synopsys.comAcked-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

ARCompact and ARCv2 only have ASL, while binutils used to support LSL as
a alias mnemonic.

Newer binutils (upstream) don't want to do that so replace it.
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Bus errors from userspace on ARCompact based cores are handled by core
as a high priority L2 interrupt but current code treated it as interrupt
Handling an interrupt like exception is certainly not going to go unnoticed.
(and it worked so far as we never saw a Bus error from userspace until
IPPK guys tested a DDR controller with ECC error detection etc hence
needed to explicitly trigger/handle such errors)

 - So move mem_service exception handler from common code into ARCv2 code.
 - In ARCompact code, define  mem_service as L2 interrupt handler which
   just drops down to pure kernel mode and goes of to enqueue SIGBUS
Reported-by: NNelson Pereira <npereira@synopsys.com>
Tested-by: NAna Martins <amartins@synopsys.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

hw_breakpoint_restore is only used within suspend.c, so it can be
declared static.
Signed-off-by: NJisheng Zhang <jszhang@marvell.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

split_pud and fixup_executable are only called from within mmu.c, so
they can be declared static.
Signed-off-by: NJisheng Zhang <jszhang@marvell.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

of_parse_and_init_cpus is only called from within smp.c, so it can be
declared static.
Signed-off-by: NJisheng Zhang <jszhang@marvell.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

We should always use linux/types.h instead of asm/types.h for
consistency, and Kbuild actually warns about it:

./usr/include/asm/kvm.h:35: include of <linux/types.h> is preferred over <asm/types.h>

This patch does as Kbuild asks us.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

On a cross-toolchain without glibc support, libgcov may not be
available, and attempting to build an arm64 kernel with GCOV
enabled then results in a build error:

/home/arnd/cross-gcc/lib/gcc/aarch64-linux/5.2.1/../../../../aarch64-linux/bin/ld: cannot find -lgcov

We don't really want to link libgcov into the vdso anyway, so
this patch just disables GCOV in the vdso directory, just as
we do for most other architectures.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

cpus_have_hwcap() is defined as a 'static' function an only used in
one place that is inside of an #ifdef, so we get a warning when
the only user is disabled:

arch/arm64/kernel/cpufeature.c:699:13: warning: 'cpus_have_hwcap' defined but not used [-Wunused-function]

This marks the function as __maybe_unused, so the compiler knows that
it can drop the function definition without warning about it.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Fixes: 37b01d53 ("arm64/HWCAP: Use system wide safe values")
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

While the 5KE processors have never been taped out, they exists though
a CP0.PRId and experimental RTLs or QEMU implementations. Add a case
entry in the idle code, as they can use the standard idle loop like the
5K processors.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11099/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Use appended DTB when available.
Signed-off-by: NAaro Koskinen <aaro.koskinen@nokia.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11115/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

For bootloaders that support booting only ELF kernels and load only ELF
segments to memory there is no easy way to supply DTB without kernel
recompilation. For that purpose, create a section called .appended_dtb
that can be later updated with board-specific DTB using binutils e.g. at
kernel installation time.
Signed-off-by: NAaro Koskinen <aaro.koskinen@nokia.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11114/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

While mips can't use the generic compat_siginfo_t directly because
its si_code and si_errno are inverted, we can still make it as
close to the generic version as possible. This makes it easier
to update when new members are added to siginfo_t.

The main changes are adding a missing _sigsys union member and
eliminating the unused _irix_sigchld one.
Signed-off-by: NAmanieu d'Antras <amanieu@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11455/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Make PAGE_MASK an unsigned long, like it is on x86, to avoid:

In file included from arch/mips/kernel/asm-offsets.c:14:0:
include/linux/mm.h: In function '__pfn_to_pfn_t':
include/linux/mm.h:1050:2: warning: left shift count >= width of type
  pfn_t pfn_t = { .val = pfn | (flags & PFN_FLAGS_MASK), };

...where PFN_FLAGS_MASK is:

#define PFN_FLAGS_MASK (~PAGE_MASK << (BITS_PER_LONG - PAGE_SHIFT))
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Cc: ross.zwisler@linux.intel.com
Cc: hch@lst.de
Cc: linux-mips@linux-mips.org
Cc: linux-nvdimm@lists.01.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mm@kvack.org
Patchwork: https://patchwork.linux-mips.org/patch/11280/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NHuang Rui <ray.huang@amd.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Li <tony.li@amd.com>
Link: http://lkml.kernel.org/r/1446630233-3166-1-git-send-email-ray.huang@amd.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp>

Update bmips_be_defconfig and bmips_stb_defconfig to have GZIP ramdisk
support enabled by default as well was timed printks.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NKevin Cernekee <cernekee@gmail.com>
Reviewed-by: NDragan Stancevic <dragan.stancevic@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: blogic@openwrt.org
Cc: jogo@openwrt.org
Patchwork: https://patchwork.linux-mips.org/patch/11307/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Add defconfig for MIPSfpga
Signed-off-by: NZubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: robh+dt@kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11363/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The xilfpga platform will be DT only.

Add required platform code.
DT files have already been added separately.
Signed-off-by: NZubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: robh+dt@kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11364/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Add device tree files for the MIPSfpga platform.

See Documentation/devicetree/bindings/mips/img/xilfpga.txt
for details about MIPSfpga
Signed-off-by: NZubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: robh+dt@kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11362/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Seval of-enabled machines (bmips, lantiq, xlp, pistachio, ralink) copied
the arguments from dtb to arcs_command_line to prevent the kernel from
overwriting them.

Since there is now an option to keep the dtb arguments, default to the
new option remove the "backup" to arcs_command_line in case of USE_OF is
enabled, except for those platforms that still take the bootloader
arguments or do not use any at all.
Signed-off-by: NJonas Gorski <jogo@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: John Crispin <blogic@openwrt.org>
Cc: Ganesan Ramalingam <ganesanr@broadcom.com>
Cc: Jayachandran C <jchandra@broadcom.com>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: James Hartley <james.hartley@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/11285/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Similar to how arm allows using selecting between bootloader arguments,
dtb arguments and both, allow to select them on mips. But since we have
less control over the place of the dtb do not modify it but instead use
the boot_command_line for merging them.

The default is "use bootloader arguments" to keep the current behaviour
as default.
Signed-off-by: NJonas Gorski <jogo@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: John Crispin <blogic@openwrt.org>
Cc: Ganesan Ramalingam <ganesanr@broadcom.com>
Cc: Jayachandran C <jchandra@broadcom.com>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: James Hartley <james.hartley@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/11284/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Since OF is now a user selectable symbol, the choice for appended dtb
support should only be visible when USE_OF is selected, as this
indicates actual machine support for device tree in MIPS.
Signed-off-by: NJonas Gorski <jogo@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: John Crispin <blogic@openwrt.org>
Cc: Ganesan Ramalingam <ganesanr@broadcom.com>
Cc: Jayachandran C <jchandra@broadcom.com>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: James Hartley <james.hartley@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/11283/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NGregory Fong <gregory.0xf0@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jonas Gorski <jogo@openwrt.org>
Cc: Joe Perches <joe@perches.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Nicolas Schichan <nschichan@freebox.fr>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11300/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Now LOONGSON_CHIPCFG register definition doesn't depend on CPUFREQ any
more, so CPU_SUPPORTS_CPUFREQ is no longer needed for suspend/resume.
Remove CONFIG_LOONGSON_SUSPEND and use CONFIG_SUSPEND instead.
Signed-off-by: NHuacai Chen <chenhc@lemote.com>
Cc: John Crispin <john@phrozen.org>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11274/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11458/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11450/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

There is a DWC2 USB core in these SoCs. To make USB work we need to first
reset and power the state machine. These are SoC specific registers and
not part of the actual USB core.
Signed-off-by: NAntti Seppälä <a.seppala@gmail.com>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11449/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>