Currently when user updates the "schemata" with new MBA percentage
values, kernel writes the corresponding bandwidth percentage values to
the IA32_MBA_THRTL_MSR.

When MBA is expressed in MBps, the schemata format is changed to have the
per package memory bandwidth in MBps instead of being specified in
percentage. Do not write the IA32_MBA_THRTL_MSRs when the schemata is
updated as that is handled separately.
Signed-off-by: NVikas Shivappa <vikas.shivappa@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: vikas.shivappa@intel.com
Cc: ak@linux.intel.com
Cc: hpa@zytor.com
Link: https://lkml.kernel.org/r/1524263781-14267-5-git-send-email-vikas.shivappa@linux.intel.com

When MBA software controller is enabled, a per domain storage is required
for user specified bandwidth in "MBps" and the "percentage" values which
are programmed into the IA32_MBA_THRTL_MSR. Add support for these data
structures and initialization.

The MBA percentage values have a default max value of 100 but however the
max value in MBps is not available from the hardware so it's set to
U32_MAX.

This simply says that the control group can use all bandwidth by default
but does not say what is the actual max bandwidth available. The actual
bandwidth that is available may depend on lot of factors like QPI link,
number of memory channels, memory channel frequency, its width and memory
speed, how many channels are configured and also if memory interleaving is
enabled. So there is no way to determine the maximum at runtime reliably.
Signed-off-by: NVikas Shivappa <vikas.shivappa@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: vikas.shivappa@intel.com
Cc: ak@linux.intel.com
Cc: hpa@zytor.com
Link: https://lkml.kernel.org/r/1524263781-14267-4-git-send-email-vikas.shivappa@linux.intel.com

Currently user does memory bandwidth allocation(MBA) by specifying the
bandwidth in percentage via the resctrl schemata file:
	"/sys/fs/resctrl/schemata"

Add a new mount option "mba_MBps" to enable the user to specify MBA
in MBps:

$mount -t resctrl resctrl [-o cdp[,cdpl2][mba_MBps]] /sys/fs/resctrl
Signed-off-by: NVikas Shivappa <vikas.shivappa@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: vikas.shivappa@intel.com
Cc: ak@linux.intel.com
Cc: hpa@zytor.com
Link: https://lkml.kernel.org/r/1524263781-14267-3-git-send-email-vikas.shivappa@linux.intel.com

x86_mask is a confusing name which is hard to associate with the
processor's stepping.

Additionally, correct an indent issue in lib/cpu.c.
Signed-off-by: NJia Zhang <qianyue.zj@alibaba-inc.com>
[ Updated it to more recent kernels. ]
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@alien8.de
Cc: tony.luck@intel.com
Link: http://lkml.kernel.org/r/1514771530-70829-1-git-send-email-qianyue.zj@alibaba-inc.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

L2 CDP can be controlled by kernel parameter "rdt=".
If "rdt=l2cdp", L2 CDP is turned on.
If "rdt=!l2cdp", L2 CDP is turned off.
Signed-off-by: NFenghua Yu <fenghua.yu@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: "Ravi V Shankar" <ravi.v.shankar@intel.com>
Cc: "Tony Luck" <tony.luck@intel.com>
Cc: Vikas" <vikas.shivappa@intel.com>
Cc: Sai Praneeth" <sai.praneeth.prakhya@intel.com>
Cc: Reinette" <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/1513810644-78015-7-git-send-email-fenghua.yu@intel.com

L2 data and L2 code are added as new resources in rdt_resources_all[]
and data in the resources are configured.

When L2 CDP is enabled, the schemata will have the two resources in
this format:
L2DATA:l2id0=xxxx;l2id1=xxxx;....
L2CODE:l2id0=xxxx;l2id1=xxxx;....

xxxx represent CBM (Cache Bit Mask) values in the schemata, similar to all
others (L2 CAT/L3 CAT/L3 CDP).
Signed-off-by: NFenghua Yu <fenghua.yu@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: "Ravi V Shankar" <ravi.v.shankar@intel.com>
Cc: "Tony Luck" <tony.luck@intel.com>
Cc: Vikas" <vikas.shivappa@intel.com>
Cc: Sai Praneeth" <sai.praneeth.prakhya@intel.com>
Cc: Reinette" <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/1513810644-78015-5-git-send-email-fenghua.yu@intel.com

intel_rdt_iffline_cpu() -> domain_remove_cpu() frees memory first and then
proceeds accessing it.

 BUG: KASAN: use-after-free in find_first_bit+0x1f/0x80
 Read of size 8 at addr ffff883ff7c1e780 by task cpuhp/31/195
 find_first_bit+0x1f/0x80
 has_busy_rmid+0x47/0x70
 intel_rdt_offline_cpu+0x4b4/0x510

 Freed by task 195:
 kfree+0x94/0x1a0
 intel_rdt_offline_cpu+0x17d/0x510

Do the teardown first and then free memory.

Fixes: 24247aee ("x86/intel_rdt/cqm: Improve limbo list processing")
Reported-by: NJoseph Salisbury <joseph.salisbury@canonical.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Ravi Shankar <ravi.v.shankar@intel.com>
Cc: Peter Zilstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: "Roderick W. Smith" <rod.smith@canonical.com>
Cc: 1733662@bugs.launchpad.net
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801161957510.2366@nanos

The platform informs via CPUID.(EAX=0x10, ECX=res#):EBX[31:0] (valid res#
are only 1 for L3 and 2 for L2) which unit of the allocation may be used by
other entities in the platform. This information is valid whether CDP (Code
and Data Prioritization) is enabled or not.

Ensure that the bitmask of shareable resource is initialized when CDP is
enabled.

Fixes: 0dd2d749 ("x86/intel_rdt: Show bitmask of shareable resource with other executing units"
Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NFenghua Yu <fenghua.yu@intel.com>
Acked-by: NVikas Shivappa <vikas.shivappa@linux.intel.com>
Acked-by: NTony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/815747bddc820ca221a8924edaf4d1a7324547e4.1508490116.git.reinette.chatre@intel.com

Errata list is included in this document:
https://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/6th-gen-x-series-spec-update.pdf
with more details in:
https://www.intel.com/content/www/us/en/processors/xeon/scalable/xeon-scalable-spec-update.html

But the tl;dr summary (using tags from first of the documents) is:
SKZ4  MBM does not accurately track write bandwidth
SKZ17 CMT counters may not count accurately
SKZ18 CAT may not restrict cacheline allocation under certain conditions
SKZ19 MBM counters may undercount

Disable all these features on Skylake models. Users who understand the
errata may re-enable using boot command line options.
Signed-off-by: NTony Luck <tony.luck@intel.com>
Cc: Fenghua" <fenghua.yu@intel.com>
Cc: Ravi V" <ravi.v.shankar@intel.com>
Cc: "Peter Zijlstra" <peterz@infradead.org>
Cc: "Stephane Eranian" <eranian@google.com>
Cc: "Andi Kleen" <ak@linux.intel.com>
Cc: "David Carrillo-Cisneros" <davidcc@google.com>
Cc: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Link: http://lkml.kernel.org/r/3aea0a3bae219062c812668bd9b7b8f1a25003ba.1503512900.git.tony.luck@intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Command line options allow us to ignore features that we don't want.
Also we can re-enable options that have been disabled on a platform
(so long as the underlying h/w actually supports the option).

[ tglx: Marked the option array __initdata and the helper function __init ]
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Fenghua" <fenghua.yu@intel.com>
Cc: Ravi V" <ravi.v.shankar@intel.com>
Cc: "Peter Zijlstra" <peterz@infradead.org>
Cc: "Stephane Eranian" <eranian@google.com>
Cc: "Andi Kleen" <ak@linux.intel.com>
Cc: "David Carrillo-Cisneros" <davidcc@google.com>
Cc: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Link: http://lkml.kernel.org/r/0c37b0d4dbc30977a3c1cee08b66420f83662694.1503512900.git.tony.luck@intel.com

No functional change, but lay the ground work for other per-model
quirks.
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Fenghua" <fenghua.yu@intel.com>
Cc: Ravi V" <ravi.v.shankar@intel.com>
Cc: "Peter Zijlstra" <peterz@infradead.org>
Cc: "Stephane Eranian" <eranian@google.com>
Cc: "Andi Kleen" <ak@linux.intel.com>
Cc: "David Carrillo-Cisneros" <davidcc@google.com>
Cc: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Link: http://lkml.kernel.org/r/f195a83751b5f8b1d8a78bd3c1914300c8fa3142.1503512900.git.tony.luck@intel.com

During a mkdir, the entire limbo list is synchronously checked on each
package for free RMIDs by sending IPIs. With a large number of RMIDs (SKL
has 192) this creates a intolerable amount of work in IPIs.

Replace the IPI based checking of the limbo list with asynchronous worker
threads on each package which periodically scan the limbo list and move the
RMIDs that have:

	llc_occupancy < threshold_occupancy

on all packages to the free list.

mkdir now returns -ENOSPC if the free list and the limbo list ere empty or
returns -EBUSY if there are RMIDs on the limbo list and the free list is
empty.

Getting rid of the IPIs also simplifies the data structures and the
serialization required for handling the lists.

[ tglx: Rewrote changelog ... ]
Signed-off-by: NVikas Shivappa <vikas.shivappa@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: peterz@infradead.org
Cc: eranian@google.com
Cc: vikas.shivappa@intel.com
Cc: ak@linux.intel.com
Cc: davidcc@google.com
Link: http://lkml.kernel.org/r/1502845243-20454-3-git-send-email-vikas.shivappa@linux.intel.com

When a CPU is dying, the overflow worker is canceled and rescheduled on a
different CPU in the same domain. But if the timer is already about to
expire this essentially doubles the interval which might result in a non
detected overflow.

Cancel the overflow worker and reschedule it immediately on a different CPU
in same domain. The work could be flushed as well, but that would
reschedule it on the same CPU.

[ tglx: Rewrote changelog once again ]
Reported-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NVikas Shivappa <vikas.shivappa@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: peterz@infradead.org
Cc: eranian@google.com
Cc: vikas.shivappa@intel.com
Cc: ak@linux.intel.com
Cc: davidcc@google.com
Link: http://lkml.kernel.org/r/1502845243-20454-2-git-send-email-vikas.shivappa@linux.intel.com

Currently we have pqr_state and rdt_default_state which store the cached
CLOSID/RMIDs and the user configured cpu default values respectively. We
touch both of these during context switch. Put all of them in one
structure so that we can spare a cache line.
Reported-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NVikas Shivappa <vikas.shivappa@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: peterz@infradead.org
Cc: eranian@google.com
Cc: sai.praneeth.prakhya@intel.com
Cc: ak@linux.intel.com
Cc: davidcc@google.com
Link: http://lkml.kernel.org/r/1502304395-7166-3-git-send-email-vikas.shivappa@linux.intel.com

The user configured per cpu default RMID is not cleared during cpu
hotplug. This may lead to incorrect RMID values after a cpu goes offline
and again comes back online. Clear the per cpu default RMID during cpu
offline and online handling.
Reported-by: NPrakyha Sai Praneeth <sai.praneeth.prakhya@intel.com>
Signed-off-by: NVikas Shivappa <vikas.shivappa@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: peterz@infradead.org
Cc: eranian@google.com
Cc: ak@linux.intel.com
Cc: davidcc@google.com
Link: http://lkml.kernel.org/r/1502304395-7166-2-git-send-email-vikas.shivappa@linux.intel.com

CPUID.(EAX=0x10, ECX=res#):EBX[31:0] reports a bit mask for a resource.
Each set bit within the length of the CBM indicates the corresponding
unit of the resource allocation may be used by other entities in the
platform (e.g. an integrated graphics engine or hardware units outside
the processor core and have direct access to the resource). Each
cleared bit within the length of the CBM indicates the corresponding
allocation unit can be configured to implement a priority-based
allocation scheme without interference with other hardware agents in
the system. Bits outside the length of the CBM are reserved.

More details on the bit mask are described in x86 Software Developer's
Manual.

The bitmask is shown in "info" directory for each resource. It's
up to user to decide how to use the bitmask within a CBM in a partition
to share or isolate a resource with other executing units.
Suggested-by: NReinette Chatre <reinette.chatre@intel.com>
Signed-off-by: NFenghua Yu <fenghua.yu@intel.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: peterz@infradead.org
Cc: eranian@google.com
Cc: ak@linux.intel.com
Cc: davidcc@google.com
Cc: vikas.shivappa@linux.intel.com
Link: http://lkml.kernel.org/r/20170725223904.12996-1-tony.luck@intel.com

Set up a delayed work queue for each domain that will read all
the MBM counters of active RMIDs once per second to make sure
that they don't wrap around between reads from users.

[Tony: Added the initializations for the work structure and completed
the patch]
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NVikas Shivappa <vikas.shivappa@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: fenghua.yu@intel.com
Cc: peterz@infradead.org
Cc: eranian@google.com
Cc: vikas.shivappa@intel.com
Cc: ak@linux.intel.com
Cc: davidcc@google.com
Cc: reinette.chatre@intel.com
Link: http://lkml.kernel.org/r/1501017287-28083-29-git-send-email-vikas.shivappa@linux.intel.com

Check CPUID bits for whether each of the MBM events is supported.
Allocate space for each RMID for each counter in each domain to save
previous MSR counter value and running total of data.
Create files in each of the monitor directories.
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NVikas Shivappa <vikas.shivappa@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: fenghua.yu@intel.com
Cc: peterz@infradead.org
Cc: eranian@google.com
Cc: vikas.shivappa@intel.com
Cc: ak@linux.intel.com
Cc: davidcc@google.com
Cc: reinette.chatre@intel.com
Link: http://lkml.kernel.org/r/1501017287-28083-27-git-send-email-vikas.shivappa@linux.intel.com

Resource groups have a per domain directory under "mon_data". Add or
remove these directories as and when domains come online and go offline.
Also update the per cpu rmids and cache upon onlining and offlining
cpus.
Signed-off-by: NVikas Shivappa <vikas.shivappa@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: peterz@infradead.org
Cc: eranian@google.com
Cc: vikas.shivappa@intel.com
Cc: ak@linux.intel.com
Cc: davidcc@google.com
Cc: reinette.chatre@intel.com
Link: http://lkml.kernel.org/r/1501017287-28083-26-git-send-email-vikas.shivappa@linux.intel.com

Add a mon_data directory for the root rdtgroup and all other rdtgroups.
The directory holds all of the monitored data for all domains and events
of all resources being monitored.

The mon_data itself has a list of directories in the format
mon_<domain_name>_<domain_id>. Each of these subdirectories contain one
file per event in the mode "0444". Reading the file displays a snapshot
of the monitored data for the event the file represents.

For ex, on a 2 socket Broadwell with llc_occupancy being
monitored the mon_data contents look as below:

$ ls /sys/fs/resctrl/p1/mon_data/
mon_L3_00
mon_L3_01

Each domain directory has one file per event:
$ ls /sys/fs/resctrl/p1/mon_data/mon_L3_00/
llc_occupancy

To read current llc_occupancy of ctrl_mon group p1
$ cat /sys/fs/resctrl/p1/mon_data/mon_L3_00/llc_occupancy
33789096

[This patch idea is based on Tony's sample patches to organise data in a
per domain directory and have one file per event (and use the fp->priv to
store mon data bits)]
Signed-off-by: NVikas Shivappa <vikas.shivappa@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: peterz@infradead.org
Cc: eranian@google.com
Cc: vikas.shivappa@intel.com
Cc: ak@linux.intel.com
Cc: davidcc@google.com
Cc: reinette.chatre@intel.com
Link: http://lkml.kernel.org/r/1501017287-28083-20-git-send-email-vikas.shivappa@linux.intel.com

Separate the ctrl cpus file handling from the generic cpus file handling
and convert the per cpu closid from u32 to a struct which will be used
later to add rmid to the same struct. Also cleanup some name space.
Signed-off-by: NVikas Shivappa <vikas.shivappa@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: peterz@infradead.org
Cc: eranian@google.com
Cc: vikas.shivappa@intel.com
Cc: ak@linux.intel.com
Cc: davidcc@google.com
Cc: reinette.chatre@intel.com
Link: http://lkml.kernel.org/r/1501017287-28083-17-git-send-email-vikas.shivappa@linux.intel.com

The info directory files and base files need to be different for each
resource like cache and Memory bandwidth. With in each resource, the
files would be further different for monitoring and ctrl. This leads to
a lot of different static array declarations given that we are adding
resctrl monitoring.

Simplify this to one common list of files and then declare a set of
flags to choose the files based on the resource, whether it is info or
base and if it is control type file. This is as a preparation to include
monitoring based info and base files.

No functional change.

[Vikas: Extended the flags to have few bits per category like resource,
	info/base etc]
Signed-off-by: NTony luck <tony.luck@intel.com>
Signed-off-by: NVikas Shivappa <vikas.shivappa@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: fenghua.yu@intel.com
Cc: peterz@infradead.org
Cc: eranian@google.com
Cc: vikas.shivappa@intel.com
Cc: ak@linux.intel.com
Cc: davidcc@google.com
Cc: reinette.chatre@intel.com
Link: http://lkml.kernel.org/r/1501017287-28083-11-git-send-email-vikas.shivappa@linux.intel.com

Hardware uses RMID(Resource monitoring ID) to keep track of each of the
RDT events associated with tasks. The number of RMIDs is dependent on
the SKU and is enumerated via CPUID. We add support to manage the RMIDs
which include managing the RMID allocation and reading LLC occupancy
for an RMID.

RMID allocation is managed by keeping a free list which is initialized
to all available RMIDs except for RMID 0 which is always reserved for
root group. RMIDs goto a limbo list once they are
freed since the RMIDs are still tagged to cache lines of the tasks which
were using them - thereby still having some occupancy. They continue to
be in limbo list until the occupancy < threshold_occupancy. The
threshold_occupancy is a user configurable value.
OS uses IA32_QM_CTR MSR to read the occupancy associated with an RMID
after programming the IA32_EVENTSEL MSR with the RMID.

[Tony: Improved limbo search]
Signed-off-by: NVikas Shivappa <vikas.shivappa@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: peterz@infradead.org
Cc: eranian@google.com
Cc: vikas.shivappa@intel.com
Cc: ak@linux.intel.com
Cc: davidcc@google.com
Cc: reinette.chatre@intel.com
Link: http://lkml.kernel.org/r/1501017287-28083-10-git-send-email-vikas.shivappa@linux.intel.com

Add common data structures for RDT resource monitoring and perform RDT
monitoring related data structure initializations which include setting
up the RMID(Resource monitoring ID) lists and event list which the
resource supports.

[ tony: some cleanup to make adding MBM easier later, remove "cqm" from
  	some names, make some data structure local to intel_rdt_monitor.c
  	static. Add copyright header]

[ tglx: Made it readable ]
Signed-off-by: NVikas Shivappa <vikas.shivappa@linux.intel.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: fenghua.yu@intel.com
Cc: peterz@infradead.org
Cc: eranian@google.com
Cc: vikas.shivappa@intel.com
Cc: ak@linux.intel.com
Cc: davidcc@google.com
Cc: reinette.chatre@intel.com
Link: http://lkml.kernel.org/r/1501017287-28083-9-git-send-email-vikas.shivappa@linux.intel.com

Change the format of the global rdt_resources_all. This holds all the
RDT resource structure initialization values. Make this more readable by
using the format:

rdt_resources_all[] = {
	[<resource_index>] =
            {...
	    }
	...
}
Signed-off-by: NVikas Shivappa <vikas.shivappa@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: peterz@infradead.org
Cc: eranian@google.com
Cc: vikas.shivappa@intel.com
Cc: ak@linux.intel.com
Cc: davidcc@google.com
Cc: reinette.chatre@intel.com
Link: http://lkml.kernel.org/r/1501017287-28083-8-git-send-email-vikas.shivappa@linux.intel.com

Few of the data-structures have generic names although they are RDT
allocation specific. Rename them to be allocation specific to
accommodate RDT monitoring. E.g. s/enabled/alloc_enabled/

No functional change.
Signed-off-by: NVikas Shivappa <vikas.shivappa@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: peterz@infradead.org
Cc: eranian@google.com
Cc: vikas.shivappa@intel.com
Cc: ak@linux.intel.com
Cc: davidcc@google.com
Cc: reinette.chatre@intel.com
Link: http://lkml.kernel.org/r/1501017287-28083-7-git-send-email-vikas.shivappa@linux.intel.com

Because the "perf cqm" and resctrl code were separately added and
indivdually configurable, there seem to be separate context switch code
and also things on global .h which are not really needed.

Move only the scheduling specific code and definitions to
<asm/intel_rdt_sched.h> and the put all the other declarations to a
local intel_rdt.h.

h/t to Reinette Chatre for pointing out that we should separate the
public interfaces used by other parts of the kernel from private
objects shared between the various files comprising RDT.

No functional change.
Signed-off-by: NVikas Shivappa <vikas.shivappa@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: peterz@infradead.org
Cc: eranian@google.com
Cc: vikas.shivappa@intel.com
Cc: ak@linux.intel.com
Cc: davidcc@google.com
Cc: reinette.chatre@intel.com
Link: http://lkml.kernel.org/r/1501017287-28083-5-git-send-email-vikas.shivappa@linux.intel.com

'perf cqm' never worked due to the incompatibility between perf
infrastructure and cqm hardware support.  The hardware uses RMIDs to
track the llc occupancy of tasks and these RMIDs are per package. This
makes monitoring a hierarchy like cgroup along with monitoring of tasks
separately difficult and several patches sent to lkml to fix them were
NACKed. Further more, the following issues in the current perf cqm make
it almost unusable:

    1. No support to monitor the same group of tasks for which we do
    allocation using resctrl.

    2. It gives random and inaccurate data (mostly 0s) once we run out
    of RMIDs due to issues in Recycling.

    3. Recycling results in inaccuracy of data because we cannot
    guarantee that the RMID was stolen from a task when it was not
    pulling data into cache or even when it pulled the least data. Also
    for monitoring llc_occupancy, if we stop using an RMID_x and then
    start using an RMID_y after we reclaim an RMID from an other event,
    we miss accounting all the occupancy that was tagged to RMID_x at a
    later perf_count.

    2. Recycling code makes the monitoring code complex including
    scheduling because the event can lose RMID any time. Since MBM
    counters count bandwidth for a period of time by taking snap shot of
    total bytes at two different times, recycling complicates the way we
    count MBM in a hierarchy. Also we need a spin lock while we do the
    processing to account for MBM counter overflow. We also currently
    use a spin lock in scheduling to prevent the RMID from being taken
    away.

    4. Lack of support when we run different kind of event like task,
    system-wide and cgroup events together. Data mostly prints 0s. This
    is also because we can have only one RMID tied to a cpu as defined
    by the cqm hardware but a perf can at the same time tie multiple
    events during one sched_in.

    5. No support of monitoring a group of tasks. There is partial support
    for cgroup but it does not work once there is a hierarchy of cgroups
    or if we want to monitor a task in a cgroup and the cgroup itself.

    6. No support for monitoring tasks for the lifetime without perf
    overhead.

    7. It reported the aggregate cache occupancy or memory bandwidth over
    all sockets. But most cloud and VMM based use cases want to know the
    individual per-socket usage.
Signed-off-by: NVikas Shivappa <vikas.shivappa@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: peterz@infradead.org
Cc: eranian@google.com
Cc: vikas.shivappa@intel.com
Cc: ak@linux.intel.com
Cc: davidcc@google.com
Cc: reinette.chatre@intel.com
Link: http://lkml.kernel.org/r/1501017287-28083-2-git-send-email-vikas.shivappa@linux.intel.com

Currently max width of 'resource name' and 'resource data' is being
initialized based on 'enabled resources' during boot. But the mount can
enable different capable resources at a later time which upsets the
tabular format of schemata. Fix this to be based on 'all capable'
resources.
Signed-off-by: NVikas Shivappa <vikas.shivappa@linux.intel.com>
Tested-by: NPrakhya, Sai Praneeth <sai.praneeth.prakhya@intel.com>
Cc: fenghua.yu@intel.com
Cc: tony.luck@intel.com
Cc: ravi.v.shankar@intel.com
Cc: vikas.shivappa@intel.com
Link: http://lkml.kernel.org/r/1492645804-17465-2-git-send-email-vikas.shivappa@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Add support to update the MBA bandwidth values for the domains via the
schemata file.

 - Verify that the bandwidth value is valid

 - Round to the next control step depending on the bandwidth granularity of
   the hardware

 - Convert the bandwidth to delay values and write the delay values to
   the corresponding domain PQOS_MSRs.

[ tglx: Massaged changelog ]
Signed-off-by: NVikas Shivappa <vikas.shivappa@linux.intel.com>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: vikas.shivappa@intel.com
Link: http://lkml.kernel.org/r/1491611637-20417-9-git-send-email-vikas.shivappa@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

The schemata files are the user space interface to update resource
controls. The parser is hardwired to support only cache resources, which do
not fit the requirements of memory resources.

Add a function pointer for a parser to the struct rdt_resource and switch
the cache parsing over.

[ tglx: Massaged changelog ]
Signed-off-by: NVikas Shivappa <vikas.shivappa@linux.intel.com>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: vikas.shivappa@intel.com
Link: http://lkml.kernel.org/r/1491611637-20417-8-git-send-email-vikas.shivappa@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

The files in the info directory for MBA are as follows:

 num_closids
 	The maximum number of CLOSids available for MBA

 min_bandwidth
 	The minimum memory bandwidth percentage value

 bandwidth_gran
 	The granularity of the bandwidth control in percent for the
	particular CPU SKU. Intermediate values entered are rounded off
	to the previous control step available. Available bandwidth
	control steps are minimum_bandwidth + N * bandwidth_gran.

 delay_linear
 	When set, the OS writes a linear percentage based value to the
	control MSRs ranging from minimum_bandwidth to 100 percent.

	This value is informational and has no influence on the values
	written to the schemata files. The values written to the
	schemata are always bandwidth percentage that is requested.
Signed-off-by: NVikas Shivappa <vikas.shivappa@linux.intel.com>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: vikas.shivappa@intel.com
Link: http://lkml.kernel.org/r/1491611637-20417-7-git-send-email-vikas.shivappa@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Cache allocation and memory bandwidth allocation require different
information files in the resctrl/info directory, but the current
implementation does not allow to have files per resource.

Add the necessary fields to the resource struct and assign the files
dynamically depending on the resource type.
Signed-off-by: NVikas Shivappa <vikas.shivappa@linux.intel.com>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: vikas.shivappa@intel.com
Link: http://lkml.kernel.org/r/1491611637-20417-6-git-send-email-vikas.shivappa@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

The MBA feature details like minimum bandwidth supported, bandwidth
granularity etc are obtained via executing CPUID with EAX=10H ,ECX=3.

Setup and initialize the MBA specific extensions to data structures like
global list of RDT resources, RDT resource structure and RDT domain
structure.

[ tglx: Split out the seperate structure and the CBM related parts ]
Signed-off-by: NVikas Shivappa <vikas.shivappa@linux.intel.com>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: vikas.shivappa@intel.com
Link: http://lkml.kernel.org/r/1491611637-20417-5-git-send-email-vikas.shivappa@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Detect MBA feature if CPUID.(EAX=10H, ECX=0):EBX.L2[bit 3] = 1.
Add supporting data structures to detect feature details which is done
in later patch using CPUID with EAX=10H, ECX= 3.
Signed-off-by: NVikas Shivappa <vikas.shivappa@linux.intel.com>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: vikas.shivappa@intel.com
Link: http://lkml.kernel.org/r/1491611637-20417-4-git-send-email-vikas.shivappa@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Updating of Cache and Memory bandwidth QOS MSRs is different.

Add a function pointer to struct rdt_resource and convert the cache part
over.

Based on Vikas all in one patch^Wmess.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: vikas.shivappa@intel.com

Memory bandwidth allocation requires different information than cache
allocation.

To avoid a lump of data in struct rdt_resource, move all cache related
information into a seperate structure and add that to struct rdt_resource.

Sanitize the data types while at it.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: vikas.shivappa@intel.com

Lot of data structures and functions are named after cache specific
resources(named after cbm, cache etc). In many cases other non cache
resources may need to share the same data structures/functions.

Generalize such naming to prepare to add more resources like memory
bandwidth.
Signed-off-by: NVikas Shivappa <vikas.shivappa@linux.intel.com>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: vikas.shivappa@intel.com
Link: http://lkml.kernel.org/r/1491611637-20417-3-git-send-email-vikas.shivappa@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Having init functions at random places in the middle of the code is
unintuitive.

Move them close to the init routine and mark them __init.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: vikas.shivappa@intel.com

If no device exists it's pointless to calculate the padding data for the
schemata files.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: vikas.shivappa@intel.com