Same status/res mixup.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This is indeed a bug: balance and volume must be used to set the left and right
channel volume. Fixed.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Removed the unused Xtal_Int variable. That made it also possible to remove a
related function. However, the code of that function has been preserved in a
comment describing an equation. Without that function that comment would
have been hard to understand.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

'off' was unused and 'ret' really had to be used to return -EFAULT.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The fix is to check for ret and return -EFAULT if non-zero.

I also noticed that write() didn't return the number of bytes written.
Fixed as well.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

refactor MFE code to allow for individual streaming configuration
for each frontend
Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com>
Reviewed-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Adds new driver, mxl111sf, to support the WinTV-Aero-M
Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com>
Reviewed-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Fix division by zero in drxd triggered by running "femon" before any DVB
tuning has been done (by "scandvb" or anything else).
Signed-off-by: NEdward Sheldrake <ejsheldrake@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add pr_fmt.
Convert usb style logging macros to pr_<level>.
Remove now unused old usb style logging macros.
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NAndreas Oberritter <obi@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add pr_fmt.
Convert usb style logging macros to pr_<level>.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add pr_fmt.
Convert usb style logging macros to pr_<level>.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add pr_fmt.
Convert usb style logging macros to pr_<level>.
Coalesce formats.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add pr_fmt.
Convert usb style logging macros to pr_<level>.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add pr_fmt and convert usb style logging macro uses to pr_<level>.
Coalesce format strings.
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NErik Andrén <erik.andren@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add pr_fmt.
Convert err macro use to pr_err.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add pr_fmt and convert printks to pr_<level>
Remove explicit prefixes from logging messages.
One of the prefixes was defective, a copy/paste error.
Use ##__VA_ARGS__ for variadic macros.
Whitespace neatening.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This converts some messages that were emitted at
KERN_INFO to KERN_DEBUG.  All of these messages
were guarded by bttv_debug tests.

Add pr_fmt.
Convert printks to pr_<level>
Convert printks without KERN_<level> to appropriate pr_<level>.
Removed embedded prefixes when pr_fmt was added.
Whitespace cleanups when around other conversions.
Macros coded with if statements should be do { if... } while (0)
so the macros can be used in other if tests.
Use ##__VA_ARGS__ for variadic macro as well.
Coalesce format strings.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add pr_fmt, convert printks to pr_<level>.
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add pr_fmt.
Convert ene_warn and ene_notice to pr_<level>.
Use pr_debug in __dbg macro and a little neatening.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Macros coded with if statements should be do { if... } while (0)
so the macros can be used in other if tests.

Use ##__VA_ARGS__ for variadic macro as well.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Standardize the mechanisms to emit logging messages.

A few other modules used an #include from saa7146,
convert those at the same time.

Add pr_fmt.
Convert printks to pr_<level>
Convert printks without KERN_<level> to appropriate pr_<level>.
Convert logging macros requiring multiple parentheses to normal style.
Removed embedded prefixes when pr_fmt was added.
Whitespace cleanups when around other conversions.
Use printf extension %pM to print mac address.
Coalesce format strings.
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NMichael Hunold <michael@mihu.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The DVB framework will try to power-down an adapter that no-one is using
any more, but this assumes that the adapter is still connected to the
machine. That's not always true for a USB adapter, so disable the sleep
operations when the adapter has been physically unplugged.

This prevents I2C write failures with error -19 from appearing
occasionally in the dmesg log.
Signed-off-by: NChris Rankin <rankincj@yahoo.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

There's no reason to still be holding the device list mutex for either of these
printk statements.
Signed-off-by: NChris Rankin <rankincj@yahoo.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch ensures that the em28xx_init_dev() function cleans up after itself,
in the event that it fails. This isimportant because the struct em28xx will be
deallocated if em28xx_init_dev() returns an error.

[mchehab@redhat.com: Fix merge conflicts and simplify the goto labels]
Signed-off-by: NChris Rankin <rankincj@yahoo.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Use atomic bit operations for the em28xx_devused mask, to prevent an
unlikely race condition should two adapters be plugged in
simultaneously. The operations also clearer than explicit bit
manipulation anyway.
Signed-off-by: NChris Rankin <rankincj@yahoo.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

snprintf()'s size parameter includes space for the terminating '\0' character.
Signed-off-by: NChris Rankin <rankincj@yahoo.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NAndreas Oberritter <obi@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

  dtv_property_cache_init().
  dtv_property_process_get().
  overwritten with invalid values, leading to partially incorrect
  results when calling FE_GET_PROPERTY.
Signed-off-by: NAndreas Oberritter <obi@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Usage of these flags has been deprecated for nearly 4 years by:

    commit f77bf014
    Author: Sam Ravnborg <sam@neptun.(none)>
    Date:   Mon Oct 15 22:25:06 2007 +0200

        kbuild: introduce ccflags-y, asflags-y and ldflags-y

Moreover, these flags (at least EXTRA_CFLAGS) have been documented for command
line use. By default, gmake(1) do not override command line setting, so this is
likely to result in build failure or unexpected behavior.

Replace their usage by Kbuild's `{as,cc,ld}flags-y'.

Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: linux-media@vger.kernel.org
Signed-off-by: NArnaud Lacombe <lacombar@gmail.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Hi,

The following patch adds the IR code for the missing "OK" key to the Pinnacle
PCTV HD map. This map is now used by the PCTV 290e DVB-T2 device, whose remote
control has 26 buttons.
Signed-off-by: NChris Rankin <rankincj@yahoo.com>
Reviewed-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

It seems just as necessary to free cam->vdev and cam in this error case as
in the next one.
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Both driver has been merged to v3.1-rc1, so add its authors as maintainers.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NTomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>