- 13 12月, 2016 1 次提交
-
-
由 Daniel Vetter 提交于
Not setting the fb modifiers flag is something different from setting the fb modifiers to 0 (which means explicitly linear). We kinda failed to document that properly. Spotted by Kristian. Cc: hoegsberg@google.com Reviewed-by: NKristian H. Kristensen <hoegsberg@google.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1478694996-4200-1-git-send-email-daniel.vetter@ffwll.ch
-
- 12 12月, 2016 2 次提交
-
-
由 Daniel Vetter 提交于
Looping twice when we can do it once is silly. Also use a consistent style. Note that there's a good race with the connector list walking, since that is no longer protected by mode_config.mutex. But that's for a later patch to fix. v2: Actually try to not blow up, somehow I lost the hunk that checks we don't copy too much. Noticed by Chris. v3: - squash all drm_mode_getresources cleanups into one - use consistent style for walking objects (Chris) v4: - Use u64_to_user_ptr (Chris) - Don't forget to copy the last connector (Chris) v5: Chris was right ... Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161211192019.29603-1-daniel.vetter@ffwll.ch
-
由 Chris Wilson 提交于
Joonas complained that writing ww_mutex_lock(&resv->lock, ctx) was too intrusive compared to reservation_object_lock(resv, ctx); Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161115154642.31850-1-chris@chris-wilson.co.uk
-
- 08 12月, 2016 4 次提交
-
-
由 Maarten Lankhorst 提交于
When DPMS was introduced to atomic, vblanks only worked when the crtc was enabled and active. wait_for_vblanks were not converted to check for crtc_state->active, which may cause an attempt for vblank_get to fail. This is probably harmless, but convert from enable to active anyway. Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1481204729-9058-2-git-send-email-maarten.lankhorst@linux.intel.com
-
由 Daniel Vetter 提交于
It's supported now! Spotted while reviewing Chris' patch to add a release hook. Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161208102847.3063-1-daniel.vetter@ffwll.ch
-
由 Chris Wilson 提交于
Currently the reference for the dmabuf->obj is incremented for the dmabuf in drm_gem_prime_handle_to_fd() (at the high level userspace interface), but is released in drm_gem_dmabuf_release() (the lowlevel handler). Improve the symmetry of the dmabuf->obj ownership by acquiring the reference in drm_gem_dmabuf_export(). This makes it easier to use the prime functions directly. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> [danvet: Update kerneldoc.] Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161207214527.22533-1-chris@chris-wilson.co.uk
-
由 Daniel Vetter 提交于
vgem (and our igt tests using vgem) need this. I suspect etnaviv will fare similarly. v2. Make it build. Oops. Fixes: d5264ed3 ("drm: Return -ENOTSUPP when called for KMS cap with a non-KMS driver") Cc: Michel Dänzer <michel.daenzer@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161207144939.22756-1-daniel.vetter@ffwll.ch
-
- 07 12月, 2016 3 次提交
-
-
由 Gustavo Padovan 提交于
Instead of dealing with crtc details inside drm_atomic.c we should just export a function that creates a new crtc fence for us and use that. Suggested-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1481046437-18778-1-git-send-email-gustavo@padovan.org
-
由 zain wang 提交于
We will ignored PSR setting if panel not support it. So, in this case, we should return from analogix_dp_enable/disable_psr() without any error code. Let's retrun 0 instead of -EINVAL when panel not support PSR in analogix_dp_enable/disable_psr(). Signed-off-by: Nzain wang <wzz@rock-chips.com> Signed-off-by: NArchit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1481072253-8917-1-git-send-email-wzz@rock-chips.com
-
由 Gustavo Padovan 提交于
We now support nonblocking commits on drm_atomic_helper_commit() so the comment is not valid anymore. Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1480946626-30917-1-git-send-email-gustavo@padovan.org
-
- 06 12月, 2016 13 次提交
-
-
由 Chris Wilson 提交于
If we cannot acquire the mode_config.mutex immediately, just back off and queue a new attempt after the poll interval. This is mostly to stop the hung task spam when the system is deadlocked, but it will also lessen the load (in such extreme cases). Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NEric Engestrom <eric.engestrom@imgtec.com> [danvet:s/lock/mutex/ per Eric's comment.] Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161206113715.30382-1-chris@chris-wilson.co.uk
-
由 Michel Dänzer 提交于
This is an attempt to make the previous fix a bit more robust going forward. v2: * Only allow DRM_CAP_TIMESTAMP_MONOTONIC with UMS drivers (Daniel Vetter, Alex Deucher) * Different logic to keep DRM_CAP_TIMESTAMP_MONOTONIC separate from the other caps (Daniel Vetter) Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161201073731.5716-1-michel@daenzer.net
-
由 Daniel Vetter 提交于
Backmerge v4.9-rc8 to get at commit e94bd173 Author: Michel Dänzer <michel.daenzer@amd.com> Date: Wed Nov 30 17:30:01 2016 +0900 drm: Don't call drm_for_each_crtc with a non-KMS driver so I can apply Michel's follow-up patch. Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
-
由 Nicolai Stange 提交于
Since commit 8a357d10 ("drm: Nerf DRM_CONTROL nodes"), a struct drm_device's ->control member is always NULL. In the case of CONFIG_DEBUG_FS=y, amdgpu_debugfs_add_files() accesses ->control->debugfs_root though. This results in a NULL pointer dereference. Fix this by omitting the drm_debugfs_create_files() call for the control minor debugfs directory which is now non-existent anyway. Fixes: 8a357d10 ("drm: Nerf DRM_CONTROL nodes") Signed-off-by: NNicolai Stange <nicstange@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98915Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Tested-by: NMike Lothian <mike@fireburn.co.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161205203022.11671-1-nicstange@gmail.com
-
由 Marta Lofstedt 提交于
The drm_atomic_helper_connector_dpms will set the connector back the old DPMS state before returning. This makes it impossible to change DPMS state of the connector. Fixes: 0853695c v2: edit of commit message Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Eric Engestrom <eric.engestrom@imgtec.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: dri-devel@lists.freedesktop.org Cc: <drm-intel-fixes@lists.freedesktop.org> Signed-off-by: NMarta Lofstedt <marta.lofstedt@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161205120408.13056-1-marta.lofstedt@intel.com
-
由 Dave Airlie 提交于
Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next Just refactoring HDMI driver by using infoframe helper function, fixing GSC Kconfig dependency issue and including trivial cleanups. * 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: Use VIDEO_SAMSUNG_EXYNOS_GSC=n as GSC Kconfig dependency drm/exynos: gsc: fix spelling mistakes exynos-drm: Fix error messages to print flags and size drm/exynos/hdmi: refactor infoframe code
-
git://people.freedesktop.org/~agd5f/linux由 Dave Airlie 提交于
- lots of code cleanup - lots of bug fixes - expose rpm based fan info via hwmon - lots of clock and powergating fixes - SI register header cleanup and conversion to common format used by newer asics * 'drm-next-4.10' of git://people.freedesktop.org/~agd5f/linux: (54 commits) drm/amdgpu: drop is_display_hung from display funcs drm/amdgpu/uvd: reduce IB parsing overhead on UVD5+ (v2) drm/amdgpu/uvd: consolidate code for fetching addr from ctx drm/amdgpu: Disable DPM in virtualization drm/amdgpu: use AMDGPU_GEM_CREATE_VRAM_CLEARED for VM PD/PTs (v2) drm/amdgpu: improve AMDGPU_GEM_CREATE_VRAM_CLEARED handling (v2) drm/amdgpu: fix error handling in amdgpu_bo_create_restricted drm/amdgpu: fix amdgpu_fill_buffer (v2) drm/amdgpu: remove amdgpu_irq_get_delayed amdgpu: Wrap dev_err() calls on vm faults with printk_ratelimit() amdgpu: Use dev_err() over vanilla printk() in vm_decode_fault() drm/amd/amdgpu: port of DCE v6 to new headers (v3) drm/amdgpu: cleanup unused iterator members for sdma v2.4 drm/amdgpu: cleanup unused iterator members for sdma v3 drm/amdgpu:impl vgt_flush for VI(V5) drm/amdgpu: enable uvd mgcg for Fiji. drm/amdgpu: refine cz uvd clock gate logic. drm/amdgpu: change log level to KERN_INFO in ci_dpm.c drm/amdgpu: always un-gate UVD REGS path. drm/amdgpu/sdma: fix typo in packet setup ...
-
git://git.pengutronix.de/lst/linux由 Dave Airlie 提交于
- fix dma-buf export path to return correct SG table - trivially implement direct dma-buf mapping - allow DRAW_INSTANCED commands in validator - make the driver work on i.MX6SX, yielding a working 2D/3D stack together with Mareks MXS DRM driver * 'drm-etnaviv-next' of git://git.pengutronix.de/lst/linux: MAINTAINERS: add etnaviv mailinglist drm/etnaviv: move linear window on MC1.0 parts if necessary drm/etnaviv: don't invoke OOM killer from dump code drm/etnaviv: fix gem_prime_get_sg_table to return new SG table drm/etnaviv: Allow DRAW_INSTANCED commands drm/etnaviv: implement dma-buf mmap
-
git://github.com/skeggsb/linux由 Dave Airlie 提交于
- BIT_PERF_PTRS uses 32-bit pointers to its subtables, we were parsing them as 16-bit, causing various issues on newer boards. - Support for MXM on GM20x and up. - More display-related fixes. * 'linux-4.10' of git://github.com/skeggsb/linux: drm/nouveau/mxm: warn more loudly on unsupported DCB version drm/nouveau/mxm: handle DCB 4.1 modification drm/nouveau/bios/mxm: handle digital connector table 1.1 drm/nouveau: Queue hpd_work on (runtime) resume drm/nouveau: Rename acpi_work to hpd_work drm/nouveau/kms/nv50: Fix atomic pageflip events. drm/nouveau/fb/ram/gp100-: fix memory detection where FBP_NUM != FBPA_NUM drm/nouveau/bios/volt: pointers are 32-bit drm/nouveau/bios/vmap: pointers are 32-bit drm/nouveau/bios/timing: pointers are 32-bit drm/nouveau/bios/therm: pointers are 32-bit drm/nouveau/bios/perf: pointers are 32-bit drm/nouveau/bios/iccsense: pointers are 32-bit drm/nouveau/bios/fan: pointers are 32-bit drm/nouveau/bios/cstep: pointers are 32-bit drm/nouveau/bios/boost: pointers are 32-bit
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Allows MXM DCB modification to be handled on GM20x and newer boards. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
I suspect the version bump is just to signify that the table now specifies pad macro/links instead of SOR/sublinks. For our usage of the table, just recognising the new version is enough. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Pan Bian 提交于
In function qxl_release_alloc(), when kmalloc() returns a NULL pointer, it returns value 0 and parameter *ret is uninitialized. 0 means no error to the callers of qxl_release_alloc(). The callers keep going and will try to reference the uninitialized variable. This patch fixes the bug, returning "-ENOMEM" when kmalloc() fails. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188911Signed-off-by: NPan Bian <bianpan2016@163.com> [seanpaul fixed up subject prefix] Signed-off-by: NSean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1480777902-7648-1-git-send-email-bianpan2016@163.com
-
- 05 12月, 2016 8 次提交
-
-
由 Javier Martinez Canillas 提交于
Commit aeefb368 ("drm/exynos: gsc: add device tree support and remove usage of static mappings") made the DRM_EXYNOS_GSC Kconfig symbol to only be selectable if the exynos-gsc V4L2 driver isn't enabled, since both use the same HW IP block. But added the dependency as depends on !VIDEO_SAMSUNG_EXYNOS_GSC which is not correct since Kconfig expressions are not boolean but tristate. So it will only evaluate to 'n' if VIDEO_SAMSUNG_EXYNOS_GSC=y but will evaluate to 'm' if VIDEO_SAMSUNG_EXYNOS_GSC=m. This means that both the V4L2 and DRM drivers can be enabled if the former is enabled as a module, which isn't what we want since otherwise 2 drivers could attempt to use the hardware at the same time. Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Colin Ian King 提交于
Trivial fixes to spelling mistakes "precalser" to "prescaler" in dev_err messages Signed-off-by: NColin Ian King <colin.king@canonical.com> Reviewed-by: NJavier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Shuah Khan 提交于
Fix exynos_drm_gem_create() error messages to include flags and size when flags and size are invalid. Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
Use core helpers to generate infoframes and generate vendor frame if necessary. Changelog: - changed 'ret >= 0' checks to '!ret' Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Daniel Vetter 提交于
They're gone since 8a357d10 ("drm: Nerf DRM_CONTROL nodes"). Spotted while doing a full audit when revieng a similar patch from Nicolai for radeon. v2: Drink coffee first aka don't forget the unregister side. Cc: Dave Airlie <airlied@redhat.com> Fixes: 8a357d10 ("drm: Nerf DRM_CONTROL nodes") Cc: Nicolai Stange <nicstange@gmail.com> Acked-by: NDave Airlie <airlied@redhat.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161205072926.12546-1-daniel.vetter@ffwll.ch
-
由 Nicolai Stange 提交于
Since commit 8a357d10 ("drm: Nerf DRM_CONTROL nodes"), a struct drm_device's ->control member is always NULL. In the case of CONFIG_DEBUG_FS=y, radeon_debugfs_add_files() accesses ->control->debugfs_root though. This results in the following Oops: BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: radeon_debugfs_add_files+0x90/0x100 [radeon] PGD 0 Oops: 0000 [#1] SMP [...] Call Trace: ? work_on_cpu+0xb0/0xb0 radeon_fence_driver_init+0x120/0x150 [radeon] si_init+0x122/0xd50 [radeon] ? _raw_spin_unlock_irq+0x2c/0x40 ? device_pm_check_callbacks+0xb3/0xc0 radeon_device_init+0x958/0xda0 [radeon] radeon_driver_load_kms+0x9a/0x210 [radeon] drm_dev_register+0xa9/0xd0 [drm] drm_get_pci_dev+0x9c/0x1e0 [drm] radeon_pci_probe+0xb8/0xe0 [radeon] [...] Fix this by omitting the drm_debugfs_create_files() call for the control minor debugfs directory which is now non-existent anyway. Fixes: 8a357d10 ("drm: Nerf DRM_CONTROL nodes") Signed-off-by: NNicolai Stange <nicstange@gmail.com> Acked-by: NDave Airlie <airlied@redhat.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161203144700.2307-1-nicstange@gmail.com
-
由 Dave Airlie 提交于
Linux 4.9-rc8 Daniel requested this so we could apply some follow on fixes cleanly to -next.
-
由 Linus Torvalds 提交于
-
- 04 12月, 2016 2 次提交
-
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "A pretty small pull request: a couple of AMD powerxpress regression fixes and a power management fix, a couple of i915 fixes and one hdlcd fix, along with one core don't oops because of incorrect API usage fix" * tag 'drm-fixes-for-v4.9-rc8' of git://people.freedesktop.org/~airlied/linux: drm/i915: drop the struct_mutex when wedged or trying to reset drm/i915: Don't touch NULL sg on i915_gem_object_get_pages_gtt() error drm: Don't call drm_for_each_crtc with a non-KMS driver drm/radeon: fix check for port PM availability drm/amdgpu: fix check for port PM availability drm/amd/powerplay: initialize the soft_regs offset in struct smu7_hwmgr drm: hdlcd: Fix cleanup order
-
由 Dave Airlie 提交于
Merge tag 'drm-intel-fixes-2016-12-01' of git://anongit.freedesktop.org/git/drm-intel into drm-fixes 2 intel fixes. * tag 'drm-intel-fixes-2016-12-01' of git://anongit.freedesktop.org/git/drm-intel: drm/i915: drop the struct_mutex when wedged or trying to reset drm/i915: Don't touch NULL sg on i915_gem_object_get_pages_gtt() error
-
- 03 12月, 2016 7 次提交
-
-
由 Linus Torvalds 提交于
Merge more fixes from Andrew Morton: "2 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm, vmscan: add cond_resched() into shrink_node_memcg() mm: workingset: fix NULL ptr in count_shadow_nodes
-
由 Michal Hocko 提交于
Boris Zhmurov has reported RCU stalls during the kswapd reclaim: INFO: rcu_sched detected stalls on CPUs/tasks: 23-...: (22 ticks this GP) idle=92f/140000000000000/0 softirq=2638404/2638404 fqs=23 (detected by 4, t=6389 jiffies, g=786259, c=786258, q=42115) Task dump for CPU 23: kswapd1 R running task 0 148 2 0x00000008 Call Trace: shrink_node+0xd2/0x2f0 kswapd+0x2cb/0x6a0 mem_cgroup_shrink_node+0x160/0x160 kthread+0xbd/0xe0 __switch_to+0x1fa/0x5c0 ret_from_fork+0x1f/0x40 kthread_create_on_node+0x180/0x180 a closer code inspection has shown that we might indeed miss all the scheduling points in the reclaim path if no pages can be isolated from the LRU list. This is a pathological case but other reports from Donald Buczek have shown that we might indeed hit such a path: clusterd-989 [009] .... 118023.654491: mm_vmscan_direct_reclaim_end: nr_reclaimed=193 kswapd1-86 [001] dN.. 118023.987475: mm_vmscan_lru_isolate: isolate_mode=0 classzone=0 order=0 nr_requested=32 nr_scanned=4239830 nr_taken=0 file=1 kswapd1-86 [001] dN.. 118024.320968: mm_vmscan_lru_isolate: isolate_mode=0 classzone=0 order=0 nr_requested=32 nr_scanned=4239844 nr_taken=0 file=1 kswapd1-86 [001] dN.. 118024.654375: mm_vmscan_lru_isolate: isolate_mode=0 classzone=0 order=0 nr_requested=32 nr_scanned=4239858 nr_taken=0 file=1 kswapd1-86 [001] dN.. 118024.987036: mm_vmscan_lru_isolate: isolate_mode=0 classzone=0 order=0 nr_requested=32 nr_scanned=4239872 nr_taken=0 file=1 kswapd1-86 [001] dN.. 118025.319651: mm_vmscan_lru_isolate: isolate_mode=0 classzone=0 order=0 nr_requested=32 nr_scanned=4239886 nr_taken=0 file=1 kswapd1-86 [001] dN.. 118025.652248: mm_vmscan_lru_isolate: isolate_mode=0 classzone=0 order=0 nr_requested=32 nr_scanned=4239900 nr_taken=0 file=1 kswapd1-86 [001] dN.. 118025.984870: mm_vmscan_lru_isolate: isolate_mode=0 classzone=0 order=0 nr_requested=32 nr_scanned=4239914 nr_taken=0 file=1 [...] kswapd1-86 [001] dN.. 118084.274403: mm_vmscan_lru_isolate: isolate_mode=0 classzone=0 order=0 nr_requested=32 nr_scanned=4241133 nr_taken=0 file=1 this is minute long snapshot which didn't take a single page from the LRU. It is not entirely clear why only 1303 pages have been scanned during that time (maybe there was a heavy IRQ activity interfering). In any case it looks like we can really hit long periods without scheduling on non preemptive kernels so an explicit cond_resched() in shrink_node_memcg which is independent on the reclaim operation is due. Link: http://lkml.kernel.org/r/20161202095841.16648-1-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com> Reported-by: NBoris Zhmurov <bb@kernelpanic.ru> Tested-by: NBoris Zhmurov <bb@kernelpanic.ru> Reported-by: NDonald Buczek <buczek@molgen.mpg.de> Reported-by: N"Christopher S. Aker" <caker@theshore.net> Reported-by: NPaul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Hocko 提交于
Commit 0a6b76dd ("mm: workingset: make shadow node shrinker memcg aware") has made the workingset shadow nodes shrinker memcg aware. The implementation is not correct though because memcg_kmem_enabled() might become true while we are doing a global reclaim when the sc->memcg might be NULL which is exactly what Marek has seen: BUG: unable to handle kernel NULL pointer dereference at 0000000000000400 IP: [<ffffffff8122d520>] mem_cgroup_node_nr_lru_pages+0x20/0x40 PGD 0 Oops: 0000 [#1] SMP CPU: 0 PID: 60 Comm: kswapd0 Tainted: G O 4.8.10-12.pvops.qubes.x86_64 #1 task: ffff880011863b00 task.stack: ffff880011868000 RIP: mem_cgroup_node_nr_lru_pages+0x20/0x40 RSP: e02b:ffff88001186bc70 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff88001186bd20 RCX: 0000000000000002 RDX: 000000000000000c RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88001186bc70 R08: 28f5c28f5c28f5c3 R09: 0000000000000000 R10: 0000000000006c34 R11: 0000000000000333 R12: 00000000000001f6 R13: ffffffff81c6f6a0 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff880013c00000(0000) knlGS:ffff880013d00000 CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000400 CR3: 00000000122f2000 CR4: 0000000000042660 Call Trace: count_shadow_nodes+0x9a/0xa0 shrink_slab.part.42+0x119/0x3e0 shrink_node+0x22c/0x320 kswapd+0x32c/0x700 kthread+0xd8/0xf0 ret_from_fork+0x1f/0x40 Code: 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 3b 35 dd eb b1 00 55 48 89 e5 73 2c 89 d2 31 c9 31 c0 4c 63 ce 48 0f a3 ca 73 13 <4a> 8b b4 cf 00 04 00 00 41 89 c8 4a 03 84 c6 80 00 00 00 83 c1 RIP mem_cgroup_node_nr_lru_pages+0x20/0x40 RSP <ffff88001186bc70> CR2: 0000000000000400 ---[ end trace 100494b9edbdfc4d ]--- This patch fixes the issue by checking sc->memcg rather than memcg_kmem_enabled() which is sufficient because shrink_slab makes sure that only memcg aware shrinkers will get non-NULL memcgs and only if memcg_kmem_enabled is true. Fixes: 0a6b76dd ("mm: workingset: make shadow node shrinker memcg aware") Link: http://lkml.kernel.org/r/20161201132156.21450-1-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com> Reported-by: NMarek Marczykowski-Górecki <marmarek@mimuw.edu.pl> Tested-by: NMarek Marczykowski-Górecki <marmarek@mimuw.edu.pl> Acked-by: NVladimir Davydov <vdavydov.dev@gmail.com> Acked-by: NJohannes Weiner <hannes@cmpxchg.org> Acked-by: NBalbir Singh <bsingharora@gmail.com> Cc: <stable@vger.kernel.org> [4.6+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nicolas Pitre 提交于
When building a specific target such as bzImage, modules aren't normally built. However if CONFIG_TRIM_UNUSED_KSYMS is enabled, no built modules means none of the exported symbols are used and therefore they will all be trimmed away from the final kernel. A subsequent "make modules" will fail because modpost cannot find the needed symbols for those modules in the kernel binary. Let's make sure modules are also built whenever CONFIG_TRIM_UNUSED_KSYMS is enabled and that the kernel binary is properly rebuilt accordingly. Signed-off-by: NNicolas Pitre <nico@linaro.org> Tested-by: NJarod Wilson <jarod@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Arnd Bergmann: "This should be the last set of bugfixes for arm-soc in v4.9. None of these are critical regressions, but it would be nice to still get them merged. - On the Juno platform, the idle latency was described wrong, leading to suboptimal cpuidle tuning. - Also on the same platform, PCI I/O space was set up incorrectly and could not work. - On the sti platform, a syntactically incorrect DT entry caused warnings. - The newly added 'gr8' platform has somewhat confusing file names, which we rename for consistency" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: dts: juno: fix cluster sleep state entry latency on all SoC versions arm64: dts: juno: Correct PCI IO window ARM: dts: STiH407-family: fix i2c nodes ARM: gr8: Rename the DTSI and relevant DTS
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Lots more phydev and probe error path leaks in various drivers by Johan Hovold. 2) Fix race in packet_set_ring(), from Philip Pettersson. 3) Use after free in dccp_invalid_packet(), from Eric Dumazet. 4) Signnedness overflow in SO_{SND,RCV}BUFFORCE, also from Eric Dumazet. 5) When tunneling between ipv4 and ipv6 we can be left with the wrong skb->protocol value as we enter the IPSEC engine and this causes all kinds of problems. Set it before the output path does any dst_output() calls, from Eli Cooper. 6) bcmgenet uses wrong device struct pointer in DMA API calls, fix from Florian Fainelli. 7) Various netfilter nat bug fixes from FLorian Westphal. 8) Fix memory leak in ipvlan_link_new(), from Gao Feng. 9) Locking fixes, particularly wrt. socket lookups, in l2tp from Guillaume Nault. 10) Avoid invoking rhash teardowns in atomic context by moving netlink cb->done() dump completion from a worker thread. Fix from Herbert Xu. 11) Buffer refcount problems in tun and macvtap on errors, from Jason Wang. 12) We don't set Kconfig symbol DEFAULT_TCP_CONG properly when the user selects BBR. Fix from Julian Wollrath. 13) Fix deadlock in transmit path on altera TSE driver, from Lino Sanfilippo. 14) Fix unbalanced reference counting in dsa_switch_tree, from Nikita Yushchenko. 15) tc_tunnel_key needs to be properly exported to userspace via uapi, fix from Roi Dayan. 16) rds_tcp_init_net() doesn't unregister notifier in error path, fix from Sowmini Varadhan. 17) Stale packet header pointer access after pskb_expand_head() in genenve driver, fix from Sabrina Dubroca. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (103 commits) net: avoid signed overflows for SO_{SND|RCV}BUFFORCE geneve: avoid use-after-free of skb->data tipc: check minimum bearer MTU net: renesas: ravb: unintialized return value sh_eth: remove unchecked interrupts for RZ/A1 net: bcmgenet: Utilize correct struct device for all DMA operations NET: usb: qmi_wwan: add support for Telit LE922A PID 0x1040 cdc_ether: Fix handling connection notification ip6_offload: check segs for NULL in ipv6_gso_segment. RDS: TCP: unregister_netdevice_notifier() in error path of rds_tcp_init_net Revert: "ip6_tunnel: Update skb->protocol to ETH_P_IPV6 in ip6_tnl_xmit()" ipv6: Set skb->protocol properly for local output ipv4: Set skb->protocol properly for local output packet: fix race condition in packet_set_ring net: ethernet: altera: TSE: do not use tx queue lock in tx completion handler net: ethernet: altera: TSE: Remove unneeded dma sync for tx buffers net: ethernet: stmmac: fix of-node and fixed-link-phydev leaks net: ethernet: stmmac: platform: fix outdated function header net: ethernet: stmmac: dwmac-meson8b: fix probe error path net: ethernet: stmmac: dwmac-generic: fix probe error path ...
-
由 Eric Dumazet 提交于
CAP_NET_ADMIN users should not be allowed to set negative sk_sndbuf or sk_rcvbuf values, as it can lead to various memory corruptions, crashes, OOM... Note that before commit 82981930 ("net: cleanups in sock_setsockopt()"), the bug was even more serious, since SO_SNDBUF and SO_RCVBUF were vulnerable. This needs to be backported to all known linux kernels. Again, many thanks to syzkaller team for discovering this gem. Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NAndrey Konovalov <andreyknvl@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-