As script_spec__delete() frees given struct script_spec it should not be
called if we failed to allocate the struct. Also it's the only caller of
the function, we can get rid of the function itself.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1325000151-4463-4-git-send-email-namhyung@gmail.comSigned-off-by: NNamhyung Kim <namhyung@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The default input file for perf report is not handled the same way as
perf record does it for its output file. This leads to unexpected
behavior of perf report, etc. E.g.:

 # perf record -a -e cpu-cycles sleep 2 | perf report | cat
 failed to open perf.data: No such file or directory  (try 'perf record' first)

While perf record writes to a fifo, perf report expects perf.data to be
read. This patch changes this to accept fifos as input file.

Applies to the following commands:

 perf annotate
 perf buildid-list
 perf evlist
 perf kmem
 perf lock
 perf report
 perf sched
 perf script
 perf timechart

Also fixes char const* -> const char* type declaration for filename
strings.

v2:
* Prevent potential null pointer access to input_name in
  builtin-report.c. Needed due to removal of patch "perf report: Setup
  browser if stdout is a pipe"

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1323248577-11268-5-git-send-email-robert.richter@amd.comSigned-off-by: NRobert Richter <robert.richter@amd.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This allows the thread name to be dispalyed when dumping
events:
           myapp 25118 [000] 450385.538815: context-switches ...
    myapp:worker 25119 [000] 450385.538894: context-switches ...

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1324578603-12762-4-git-send-email-dsahern@gmail.comSigned-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The option is documented in man perf-script but was not yet implemented:

       -a
           Force system-wide collection. Scripts run without a
           <command> normally use -a by default, while scripts run
           with a <command> normally don't - this option allows the
           latter to be run in system-wide mode.

As with perf record you now can profile in system-wide mode for the
runtime of a given command, e.g.:

 # perf script -a syscall-counts sleep 2

Cc: Ingo Molnar <mingo@elte.hu>
Link: http://lkml.kernel.org/r/1322229925-10075-1-git-send-email-robert.richter@amd.comSigned-off-by: NRobert Richter <robert.richter@amd.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Fix mem leaks and missing NULL pointer checks after strdup().

And get_script_path() did not free __script_root in case of continue.

Introduce a helper function get_script_root().

Cc: Ingo Molnar <mingo@elte.hu>
Link: http://lkml.kernel.org/r/1322217520-3287-1-git-send-email-robert.richter@amd.comSigned-off-by: NRobert Richter <robert.richter@amd.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Allows collecting events system wide and then pulling out events for a
specific task name(s). e.g,

    perf script -c gnome-shell,gnome-terminal

Applies on top of:
    https://lkml.org/lkml/2011/11/13/74

v2->v3
- update Documentation

v1->v2
- use comm_list from symbol_conf

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1321894972-24246-1-git-send-email-dsahern@gmail.comSigned-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Currently the meaning of -C varies by perf command: for perf-top,
perf-stat, perf-record it means cpu list. For perf-report it means comm
list. Then perf-annotate, perf-report and perf-script use -c for cpu
list.

Fix annotate, report and script to use -C for cpu list to be consistent
with top, stat and record. This means report needs to use -c for comm
list which does introduce a backward compatibility change.

v1 -> v2
- update perf-script.txt too

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1321209008-7004-1-git-send-email-dsahern@gmail.comSigned-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

To better reflect that it became the base class for all tools, that must
be in each tool struct and where common stuff will be put.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-qgpc4msetqlwr8y2k7537cxe@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Reducing the exposure of perf_session further, so that we can use the
classes in cases where no perf.data file is created.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-stua66dcscsezzrcdugvbmvd@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

So that we don't need to have that many globals.

Next steps will remove the 'session' pointer, that in most cases is
not needed.

Then we can rename perf_event_ops to 'perf_tool' that better describes
this class hierarchy.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-wp4djox7x6w1i2bab1pt4xxp@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Since we have it in evsel->hists.callchain_cursor, remove it from
perf_session.

One more step in disentangling several places from requiring a
perf_session pointer.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-rxr5dj3di7ckyfmnz0naku1z@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The goal of this patch is to include more information about the host
environment into the perf.data so it is more self-descriptive. Overtime,
profiles are captured on various machines and it becomes hard to track
what was recorded, on what machine and when.

This patch provides a way to solve this by extending the perf.data file
with basic information about the host machine. To add those extensions,
we leverage the feature bits capabilities of the perf.data format.  The
change is backward compatible with existing perf.data files.

We define the following useful new extensions:
 - HEADER_HOSTNAME: the hostname
 - HEADER_OSRELEASE: the kernel release number
 - HEADER_ARCH: the hw architecture
 - HEADER_CPUDESC: generic CPU description
 - HEADER_NRCPUS: number of online/avail cpus
 - HEADER_CMDLINE: perf command line
 - HEADER_VERSION: perf version
 - HEADER_TOPOLOGY: cpu topology
 - HEADER_EVENT_DESC: full event description (attrs)
 - HEADER_CPUID: easy-to-parse low level CPU identication

The small granularity for the entries is to make it easier to extend
without breaking backward compatiblity. Many entries are provided as
ASCII strings.

Perf report/script have been modified to print the basic information as
easy-to-parse ASCII strings. Extended information about CPU and NUMA
topology may be requested with the -I option.

Thanks to David Ahern for reviewing and testing the many versions of
this patch.

 $ perf report --stdio
 # ========
 # captured on : Mon Sep 26 15:22:14 2011
 # hostname : quad
 # os release : 3.1.0-rc4-tip
 # perf version : 3.1.0-rc4
 # arch : x86_64
 # nrcpus online : 4
 # nrcpus avail : 4
 # cpudesc : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
 # cpuid : GenuineIntel,6,15,11
 # total memory : 8105360 kB
 # cmdline : /home/eranian/perfmon/official/tip/build/tools/perf/perf record date
 # event : name = cycles, type = 0, config = 0x0, config1 = 0x0, config2 = 0x0, excl_usr = 0, excl_kern = 0, id = { 29, 30, 31,
 # HEADER_CPU_TOPOLOGY info available, use -I to display
 # HEADER_NUMA_TOPOLOGY info available, use -I to display
 # ========
 #
 ...

 $ perf report --stdio -I
 # ========
 # captured on : Mon Sep 26 15:22:14 2011
 # hostname : quad
 # os release : 3.1.0-rc4-tip
 # perf version : 3.1.0-rc4
 # arch : x86_64
 # nrcpus online : 4
 # nrcpus avail : 4
 # cpudesc : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
 # cpuid : GenuineIntel,6,15,11
 # total memory : 8105360 kB
 # cmdline : /home/eranian/perfmon/official/tip/build/tools/perf/perf record date
 # event : name = cycles, type = 0, config = 0x0, config1 = 0x0, config2 = 0x0, excl_usr = 0, excl_kern = 0, id = { 29, 30, 31,
 # sibling cores   : 0-3
 # sibling threads : 0
 # sibling threads : 1
 # sibling threads : 2
 # sibling threads : 3
 # node0 meminfo  : total = 8320608 kB, free = 7571024 kB
 # node0 cpu list : 0-3
 # ========
 #
 ...
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Tested-by: NDavid Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/20110930134040.GA5575@quadSigned-off-by: NStephane Eranian <eranian@google.com>
[ committer notes: Use --show-info in the tools as was in the docs, rename
  perf_header_fprintf_info to perf_file_section__fprintf_info, fixup
  conflict with f69b64f7 "perf: Support setting the disassembler style" ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add an option to perf report/annotate/script to specify which
CPUs to operate on. This enables us to take a single system wide
profile and analyse each CPU (or group of CPUs) in isolation.

This was useful when profiling a multiprocess workload where the
bottleneck was on one CPU but this was hidden in the overall
profile. Per process and per thread breakdowns didn't help
because multiple processes were running on each CPU and no
single process consumed an entire CPU.

The patch converts the list of CPUs returned by cpu_map__new
into a bitmap for fast lookup. I wanted to use -C to be
consistent with perf top/record/stat, but unfortunately perf
report already uses -C <comms>.

 v2: Incorporate suggestions from David Ahern:
	- Added -c to perf script
	- Check that SAMPLE_CPU is set when -c is used
	- Update documentation

 v3: Create perf_session__cpu_bitmap()
Signed-off-by: NAnton Blanchard <anton@samba.org>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Link: http://lkml.kernel.org/r/20110704215750.11647eb9@krytenSigned-off-by: NIngo Molnar <mingo@elte.hu>

Resolve to a function or variable if possible and if the sym option is
enabled.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1306782503-22002-1-git-send-email-dsahern@gmail.comSigned-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The 'sym' option displays both the function name and the DSO it comes
from. Split the display of the dso into a separate option.  This allows
display of the ip address and symbol without the dso, thus shortening
line lengths - and decluttering the output a bit.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1306528124-25861-3-git-send-email-dsahern@gmail.comSigned-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Currently the "sym" output field is used to dump instruction pointers
and callchain stack. Sample addresses can also be converted to symbols,
so the meaning of "sym" needs to be fixed. This patch adds an "ip"
option and if it is selected the user can also opt to dump symbols for
them. If the user opts to dump IP without syms only the address is
shown.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1306528124-25861-2-git-send-email-dsahern@gmail.comSigned-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: trivial@kernel.org
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1105261011290.17400@swampdragon.chaosbits.netSigned-off-by: NIngo Molnar <mingo@elte.hu>

Check for required sample attributes using evsel rather than sample_type
in the session header. If the attribute for a default field is not
present for the event type (e.g., new command operating on file from
older kernel) the field is removed from the output list.

Expected event types must exist. For example, if a user specifies

  -f trace:time,trace -f sw:time,cpu,sym

the perf.data file must contain both tracepoints and software events
(ie., it is an error if either does not exist in the file).

Attribute checking is done once at the beginning of perf-script rather
than for each sample.

v1 -> v2:
- addressed comments from acme

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1302148460-570-1-git-send-email-daahern@cisco.comSigned-off-by: NDavid Ahern <daahern@cisco.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Useful for getting stack traces for hardware events not handled by
PERF_TYPE_HARDWARE.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: NArun Sharma <asharma@fb.com>
Link: http://lkml.kernel.org/n/tip-qimdcdpekjqxuyqovy4kjusx@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Allow:
  perf script -f <fields>

to be equivalent to:
  perf script -f trace:<fields> -f sw:<fields> -f hw:<fields>

i.e., the specified fields apply to all event types if the type string
is not given.

The field (-f) arguments are processed in the order received. A later
usage can reset a prior request. e.g.,

  -f trace: -f comm,tid,time,sym

The first -f suppresses trace events (field list is ""), but then the second
invocation sets the fields to comm,tid,time,sym. In this case a warning is
given to the user:

  "Overriding previous field request for all events."

Alternativey, consider the order:

  -f comm,tid,time,sym -f trace:

The first -f sets the fields for all events and the second -f suppresses trace
events. The user is given a warning message about the override, and the result
of the above is that only S/W and H/W events are displayed with the given
fields.

For the 'wildcard' option if a user selected field is invalid for an event
type, a message is displayed to the user that the option is ignored for that
type. For example:

  perf script -f comm,tid,trace 2>&1 | less
  'trace' not valid for hardware events. Ignoring.
  'trace' not valid for software events. Ignoring.

Alternatively, if the type is given an invalid field is specified it is an
error. For example:

    perf script -v -f sw:comm,tid,trace 2>&1 | less
    'trace' not valid for software events.

At this point usage is displayed, and perf-script exits.

Finally, a user may not set fields to none for all event types.
i.e., -f "" is not allowed.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
LPU-Reference: <1300377801-27246-1-git-send-email-daahern@cisco.com>
Signed-off-by: NDavid Ahern <daahern@cisco.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Resolving the sample->id to an evsel since the most advanced tools,
report and annotate, and the others will too when they evolve to
properly support multi-event perf.data files.

Good also because it does an extra validation, checking that the ID is
valid when present. When that is not the case, the overhead is just a
branch + function call (perf_evlist__id2evsel).

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Custom fields set for each type by prepending field argument with type.
For file with multiple event types (e.g., trace and S/W) display of an
event type suppressed by setting output fields to "".

e.g.,
perf record -ga -e sched:sched_switch -e cpu-clock -c 10000000 -R -- sleep 1
perf script

openssl 11496 [000]  9711.807107: cpu-clock-msecs:
        ffffffff810c22dc arch_local_irq_restore ([kernel.kallsyms])
        ffffffff810c518c __alloc_pages_nodemask ([kernel.kallsyms])
        ffffffff810297b2 pte_alloc_one ([kernel.kallsyms])
        ffffffff810d8b98 __pte_alloc ([kernel.kallsyms])
        ffffffff810daf07 handle_mm_fault ([kernel.kallsyms])
        ffffffff8138763a do_page_fault ([kernel.kallsyms])
        ffffffff81384a65 page_fault ([kernel.kallsyms])
            7f6130507d70 asn1_check_tlen (/lib64/libcrypto.so.1.0.0c)
                       0  ()

         openssl 11496 [000]  9711.808042: sched_switch: prev_comm=openssl ...
     kworker/0:0     4 [000]  9711.808067: sched_switch: prev_comm=kworker/...
         swapper     0 [001]  9711.808090: sched_switch: prev_comm=kworker/...
            sshd 11451 [001]  9711.808185: sched_switch: prev_comm=sshd pre...
swapper     0 [001]  9711.816155: cpu-clock-msecs:
        ffffffff81023609 native_safe_halt ([kernel.kallsyms])
        ffffffff8100132a cpu_idle ([kernel.kallsyms])
        ffffffff8137cf9b start_secondary ([kernel.kallsyms])

openssl 11496 [000]  9711.817104: cpu-clock-msecs:
            7f61304ad723 AES_cbc_encrypt (/lib64/libcrypto.so.1.0.0c)
            7fff3402f950  ()
        12f0debc9a785634  ()

swapper     0 [001]  9711.826155: cpu-clock-msecs:
        ffffffff81023609 native_safe_halt ([kernel.kallsyms])
        ffffffff8100132a cpu_idle ([kernel.kallsyms])
        ffffffff8137cf9b start_secondary ([kernel.kallsyms])

To suppress trace events within the file and use default output for S/W events:
perf script -f trace:

or to suppress S/W events and do default display for trace events:
perf script -f sw:

Custom field selections:
perf script -f sw:comm,tid,time -f trace:time,trace

         openssl 11496  9711.797162:
         swapper     0  9711.807071:
         openssl 11496  9711.807107:
 9711.808042: prev_comm=openssl prev_pid=11496 prev_prio=120 prev_state=R ...
 9711.808067: prev_comm=kworker/0:0 prev_pid=4 prev_prio=120 prev_state=S ...
 9711.808090: prev_comm=kworker/0:0 prev_pid=0 prev_prio=120 prev_state=R ...
 9711.808185: prev_comm=sshd prev_pid=11451 prev_prio=120 prev_state=S ==>...
         swapper     0  9711.816155:
         openssl 11496  9711.817104:
         swapper     0  9711.826155:
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-7-git-send-email-daahern@cisco.com>
Signed-off-by: NDavid Ahern <daahern@cisco.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add option to dump symbols found in events.

e.g., perf script -f comm,pid,tid,time,trace,sym

swapper     0/0       537.037184: prev_comm=swapper prev_pid=0 prev_prio=120...
        ffffffff81030350 perf_trace_sched_switch ([kernel.kallsyms])
        ffffffff81382ac5 schedule ([kernel.kallsyms])
        ffffffff8100134a cpu_idle ([kernel.kallsyms])
        ffffffff81370b39 rest_init ([kernel.kallsyms])
        ffffffff81696c23 start_kernel ([kernel.kallsyms].init.text)
        ffffffff816962af x86_64_start_reservations ([kernel.kallsyms].init.text)
        ffffffff816963b9 x86_64_start_kernel ([kernel.kallsyms].init.text)

sshd  1675/1675    537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120...
        ffffffff81030350 perf_trace_sched_switch ([kernel.kallsyms])
        ffffffff81382ac5 schedule ([kernel.kallsyms])
        ffffffff813837aa schedule_hrtimeout_range_clock ([kernel.kallsyms])
        ffffffff81383886 schedule_hrtimeout_range ([kernel.kallsyms])
        ffffffff8110c4f9 poll_schedule_timeout ([kernel.kallsyms])
        ffffffff8110cd20 do_select ([kernel.kallsyms])
        ffffffff8110ced8 core_sys_select ([kernel.kallsyms])
        ffffffff8110d00d sys_select ([kernel.kallsyms])
        ffffffff81002bc2 system_call ([kernel.kallsyms])
            7f1647e56e93 __GI_select (/lib64/libc-2.12.90.so)

netstat  1692/1692    537.038664: prev_comm=netstat prev_pid=1692 prev_prio=...
        ffffffff81030350 perf_trace_sched_switch ([kernel.kallsyms])
        ffffffff81382ac5 schedule ([kernel.kallsyms])
        ffffffff81002c3a sysret_careful ([kernel.kallsyms])
            7f7a6cd1b210 __GI___libc_read (/lib64/libc-2.12.90.so)
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-6-git-send-email-daahern@cisco.com>
Signed-off-by: NDavid Ahern <daahern@cisco.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Allow a user to select which fields to print to stdout for event data.
Options include comm (command name), tid (thread id), pid (process id),
time (perf timestamp), cpu, event (for event name), and trace (for
trace data).

Default is set to maintain compatibility with current output; this
feature does alter output format slightly -- no '-' between command
and pid/tid.

Thanks to Frederic Weisbecker for detailed suggestions on this approach.

Examples (output compressed)

1. trace, default format

perf record -ga -e sched:sched_switch
perf script

swapper    0 [000] 537.037184: sched_switch: prev_comm=swapper prev_pid=0...
   sshd 1675 [000] 537.037309: sched_switch: prev_comm=sshd prev_pid=1675...
netstat 1692 [001] 537.038664: sched_switch: prev_comm=netstat prev_pid=1692...

2. trace, custom format

perf record -ga -e sched:sched_switch
perf script -f comm,pid,time,trace     <--- omitting cpu and event name

swapper    0 537.037184: prev_comm=swapper prev_pid=0 prev_prio=120 ...
   sshd 1675 537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120 ...
netstat 1692 537.038664: prev_comm=netstat prev_pid=1692 prev_prio=120 ...
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-5-git-send-email-daahern@cisco.com>
Signed-off-by: NDavid Ahern <daahern@cisco.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This change does impact output: latency data is trace specific and is
now printed after the common data - comm, tid, cpu, time and event name.
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-4-git-send-email-daahern@cisco.com>
Signed-off-by: NDavid Ahern <daahern@cisco.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Prepare for handling of samples for any event type.
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-2-git-send-email-daahern@cisco.com>
Signed-off-by: NDavid Ahern <daahern@cisco.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

And move the event_t methods to the perf_event__ too.

No code changes, just namespace consistency.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Making the namespace more uniform.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Using %L[uxd] has issues in some architectures, like on ppc64.  Fix it
by making our 64 bit integers typedefs of stdint.h types and using
PRI[ux]64 like, for instance, git does.

Reported by Denis Kirjanov that provided a patch for one case, I went
and changed all cases.
Reported-by: NDenis Kirjanov <dkirjanov@kernel.org>
Tested-by: NDenis Kirjanov <dkirjanov@kernel.org>
LKML-Reference: <20110120093246.GA8031@hera.kernel.org>
Cc: Denis Kirjanov <dkirjanov@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pingtian Han <phan@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Not accessed outside builtin-script, so make them static.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

That already does what was being done here. The warning is now unconditionally
given by __perf_session__process_pipe_events, just like for non pipe processing.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

If we don't use .ordering_requires_timestamps we'll end up trying to order
events with no timestamps when running on older kernels.

Problem introduced in eac23d1c.

After the last three fixes, perf scripting is back working, tested with
new perf userspace on old and new (with sample_id_all) kernels.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Torok Edwin <edwintorok@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

If we are running the new perf on an old kernel without support for
sample_id_all, we should fall back to the old unordered processing of
events. If we didn't than we would *always* process events without
timestamps out of order, whether or not we hit a reordering race. In
other words, instead of there being a chance of not attributing samples
correctly, we would guarantee that samples would not be attributed.

While processing all events without timestamps before events with
timestamps may seem like an intuitive solution, it falls down as
PERF_RECORD_EXIT events would also be processed before any samples.
Even with a workaround for that case, samples before/after an exec would
not be attributed correctly.

This patch allows commands to indicate whether they need to fall back to
unordered processing, so that commands that do not care about timestamps
on every event will not be affected. If we do fallback, this will print
out a warning if report -D was invoked.

This patch adds the test in perf_session__new so that we only need to
test once per session. Commands that do not use an event_ops (such as
record and top) can simply pass NULL in it's place.
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1291951882-sup-6069@au1.ibm.com>
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Fix annoying compiler warning in the is_top_script() function.

The issue was that a const char * was cast into a char * to call
ends_with(). We fix the users of ends_with() instead. Some are passing a
char *, but it is okay to cast the return value of ends_with() to char *
(because we understand what ends_with() does).

Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@gmail.com>
LKML-Reference: <4cf92096.17edd80a.1540.5d60@mx.google.com>
Signed-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

At perf_session__process_event, so that we reduce the number of lines in eache
tool sample processing routine that now receives a sample_data pointer already
parsed.

This will also be useful in the next patch, where we'll allow sample the
identity fields in MMAP, FORK, EXIT, etc, when it will be possible to see (cpu,
timestamp) just after before every event.

Also validate callchains in perf_session__process_event, i.e. as early as
possible, and keep a counter of the number of events discarded due to invalid
callchains, warning the user about it if it happens.

There is an assumption that was kept that all events have the same sample_type,
that will be dealt with in the future, when this preexisting limitation will be
removed.
Tested-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NIan Munsie <imunsie@au1.ibm.com>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <1291318772-30880-4-git-send-email-acme@infradead.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Free the perf trace name space and rename the trace to 'script' which is a
better match for the scripting engine.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Update usage to reflect the different perf trace variants.
Signed-off-by: NTom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>

This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.

The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.

With this patch, the following live-mode trace now works as expected:

 $ perf trace rw-by-pid ls -al

The previous system-wide behavior for this command would still be
available by explicitly specifying -a:

 $ perf trace rw-by-pid -a ls -al

and if no <command> is specified, the output is also system-wide:

 $ perf trace rw-by-pid

Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.

For example:

 $ perf trace syscall-counts ls

Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.

If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:

 $ perf trace record syscall-counts
 $ perf trace report syscall-counts ls

So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:

- for commands with optional args and commands with no args, no args
  are sent to the report script, all are sent to the record step

- for 'top' commands i.e. that end with 'top', <commands> can't be
  used - all extra args are send to the report script as params

- for commands with required args, the n required args are taken to be
  the first n args after the script name and sent to the report
  script, and the rest are sent to the record step
Signed-off-by: NTom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>

Because the perf-trace shell scripts hard-coded the use of the
perf-record system-wide param, a perf trace record session was always
system wide, even if it was given a command.

If given a command, perf trace record now only records the events for
the command, as users expect.

If no command is given, or if the '-a' option is used, the recorded
events are system-wide, as before.

root@tropicana:~# perf trace record syscall-counts ls -al
root@tropicana:~# perf trace
              ls-23152 [000] 39984.890387: sys_enter: NR 12 (0, 0, 0, 0, 0, 0)
              ls-23152 [000] 39984.890404: sys_enter: NR 9 (0, 0, 0, 0, 0, 0)

root@tropicana:~# perf trace record syscall-counts -a ls -al
root@tropicana:~# perf trace
    npviewer.bin-22297 [000] 39831.102709: sys_enter: NR 168 (0, 0, 0, 0, 0, 0)
              ls-23111 [000] 39831.107679: sys_enter: NR 59 (0, 0, 0, 0, 0, 0)
Signed-off-by: NTom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>

Free the other two fields of script_desc which somehow got overlooked,
free malloc'ed args in case exec fails, and add missing checks for
failed mallocs.
Signed-off-by: NTom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>