- 05 10月, 2009 1 次提交
-
-
由 Ben Hutchings 提交于
This string query operation was supposed to be replaced by the generic get_sset_count() starting in 2007. Convert qeth's implementation. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 8月, 2009 2 次提交
-
-
由 Klaus-Dieter Wacker 提交于
Clear separation of cast-type determination (send path) for layer-2 resp. layer-3. Allowing to have inline functions for qeth layer- discipline. Signed-off-by: NKlaus-Dieter Wacker <kdwacker@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Klaus-Dieter Wacker 提交于
Qeth HiperSockets support now retries sending of packets when the IBM System z signals a temporary resource shortage (e.g. target buffer full). The packet is enqueued into the device queue. After 3 times of unsuccessful send the packet is dropped. Signed-off-by: NKlaus-Dieter Wacker <kdwacker@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 3月, 2009 2 次提交
-
-
由 Frank Blaschka 提交于
Performance measurements showed EDDP does not lower CPU costs but increase them. So we dump out EDDP code from qeth driver. Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Frank Blaschka 提交于
Add statistics counter for software tx checksumming. Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 1月, 2009 1 次提交
-
-
由 Ursula Braun 提交于
OSA-devices operating in layer3 mode offer adding of the source MAC address to the QDIO header of inbound packets. The qeth driver can exploit this functionality to replace FAKELL-entries in the ethernet header of received packets. Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 12月, 2008 2 次提交
-
-
由 Frank Blaschka 提交于
Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Add a new proc interface /proc/service_levels that allows any code to report a relevant service level, e.g. the microcode level of devices, the service level of the hypervisor, etc. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 11 10月, 2008 1 次提交
-
-
由 Kay Sievers 提交于
bus_id -> dev_name() conversions in s390 code. [cornelia.huck@de.ibm.com: minor adaptions] Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 27 8月, 2008 1 次提交
-
-
由 Frank Blaschka 提交于
In case the netdev unicast list contains additional entries we have to register/deregister them. Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 01 8月, 2008 1 次提交
-
-
由 Frank Blaschka 提交于
For hiper socket devices this patch will economize the reallocation of the tx skb data segment by allocating separate memory for the qdio transport information (qeth header). Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 17 7月, 2008 1 次提交
-
-
由 Jan Glauber 提交于
List of major changes: - split qdio driver into several files - seperation of thin interrupt code - improved handling for multiple thin interrupt devices - inbound and outbound processing now always runs in tasklet context - significant less tasklet schedules per interrupt needed - merged qebsm with non-qebsm handling - cleanup qdio interface and added kerneldoc - coding style Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: NUtz Bacher <utz.bacher@de.ibm.com> Reviewed-by: NUrsula Braun <braunu@de.ibm.com> Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
- 29 4月, 2008 3 次提交
-
-
由 Frank Blaschka 提交于
Remove unnecessary traces. Remove unnecessary wrappers for skb functions. Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Frank Blaschka 提交于
Load balancing bonding queries the speed of the slave interfaces. To support a bond consisting of different slave speeds we have to report the speed by ethtool settings. Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Peter Tiedemann 提交于
Replace complex macro for s390dbf calls by equivalent function. This reduces module size about 10% without visible performance impact. Signed-off-by: NPeter Tiedemann <ptiedem@de.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 17 4月, 2008 1 次提交
-
-
由 Peter Tiedemann 提交于
Improving debug message handling, moving ipa into messages from kernel to dbf, some cleanups and typo fixes. Signed-off-by: NPeter Tiedemann <ptiedem@de.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 17 3月, 2008 1 次提交
-
-
由 Frank Blaschka 提交于
List of major changes and improvements: no manipulation of the global ARP constructor clean code split into core, layer 2 and layer 3 functionality better exploitation of the ethtool interface better representation of the various hardware capabilities fix packet socket support (tcpdump), no fake_ll required osasnmpd notification via udev events coding style and beautification Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 11 10月, 2007 1 次提交
-
-
由 Stephen Hemminger 提交于
Since hardware header operations are part of the protocol class not the device instance, make them into a separate object and save memory. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 8月, 2007 1 次提交
-
-
由 Heiko Carstens 提交于
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NUrsula Braun <braunu@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 17 7月, 2007 1 次提交
-
-
由 Frank Blaschka 提交于
For large incoming packets > PAGE_SIZE/2 qeth creates a fragmented skb by adding pointers to qdio pages to the fragment list of the skb. This avoids allocating big chunks of consecutive memory. Also copying data from the qdio buffer to the skb is economized. Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NUrsula Braun <braunu@de.ibm.com> Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 05 5月, 2007 1 次提交
-
-
由 Cornelia Huck 提交于
Instead of the deprecated read_conf_data(), implement a new function qeth_read_conf_data(). Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 15 3月, 2007 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 1月, 2007 1 次提交
-
-
由 Frank Blaschka 提交于
- qeth device functions were not callable in atomic context due to usage of wait_event_xxx operations in qeth. "schedule while atomic" message appeared and kernel dumped when removing slave from bond device. Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 04 12月, 2006 1 次提交
-
-
由 Ursula Braun 提交于
Add some prefixes to constands defined in drivers/s390/net/qdio.h and drivers/s390/lcs.h to make it possible to include the three header files drivers/s390/net/qeth.h, drivers/s390/net/qdio.h and drivers/net/s390/lcs.h in one C file. This is required for the patch that generates the kerntypes.o file for use by lcrash. Signed-off-by: NUrsula Braun <braunu@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 17 9月, 2006 4 次提交
-
-
由 Frank Pavlic 提交于
[PATCH 8/9] s390: qeth driver fixes [5/6] From: Frank Pavlic <fpavlic@de.ibm.com> fix kernel panic in qdio queue handling. qeth_qdio_clear_card() could be invoked by 2 CPUs simultaneously (for example reboot event and recovery). Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Frank Pavlic 提交于
[PATCH 7/9] s390: qeth driver fixes [4/6] From: Frank Pavlic <fpavlic@de.ibm.com> - fix kernel crash due to race, set card->state to SOFTSETUP after card and card->dev are initialized properly. - remove CONFIG_QETH_PERF_STATS, use sysfs attribute instead, as we want to have the ability to turn on/off the statistics at runtime. Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Frank Pavlic 提交于
[PATCH 6/9] s390: qeth driver fixes [3/6] From: Frank Pavlic <fpavlic@de.ibm.com> fixed kernel panic caused by qeth driver: Using a bonding device qeth driver will realloc headroom for every skb coming from the bond device. Once this happens qeth frees the original skb and set the skb pointer to the new realloced skb. Under heavy transmit workload (e.g.UDP streams) through bond network device the qdio output queue might get full. In this case we return with EBUSY from qeth_send_packet. Returning to qeth_hard_start_xmit routine the skb address on the stack still points to the old address, which has been freed before. Returning from qeth_hard_start_xmit with EBUSY results in requeuing the skb. In this case it corrupts the qdisc queue and results in kernel panic. Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Frank Pavlic 提交于
[PATCH 5/9] s390: qeth driver fixes [2/6] From: Frank Pavlic <fpavlic@de.ibm.com> - fixed error handling in create_device_attributes - fixed some minor bugs in IPv4 and IPv6 address checking Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 27 5月, 2006 2 次提交
-
-
由 Jeff Garzik 提交于
Previous fix patches added a bunch of trailing whitespace, which git-applymbox complained loudly about.
-
由 Ursula Braun 提交于
From: Frank Pavlic <fpavlic@de.ibm.com> - correct checking of sscanf-%n value in qeth_string_to_ipaddr(). - don't use netif_stop_queue outside the hard_start_xmit routine. Rather use netif_tx_disable. - don't call qeth_netdev_init on a recovery. Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 18 2月, 2006 1 次提交
-
-
由 Frank Pavlic 提交于
[patch 2/2] s390: some qeth driver fixes From: Frank Pavlic <fpavlic@de.ibm.com> - fixed kernel panic when using EDDP support in Layer 2 mode - NULL pointer exception in qeth_set_offline fixed. - setting EDDP in Layer 2 mode did not set NETIF_F_(SG/TSO) flags when device became online. - use sscanf for parsing and converting IPv4 addresses from string to __u8 values. - qeth_string_to_ipaddr6 fixed. in case of double colon the converted IPv6 address out from the string was not correct in previous implementation. Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com> diffstat: qeth.h | 112 +++++++++++++++++++++++++----------------------------------- qeth_eddp.c | 11 ++++- qeth_main.c | 17 +++------ 3 files changed, 63 insertions(+), 77 deletions(-) Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
- 02 2月, 2006 1 次提交
-
-
由 Heiko Carstens 提交于
- Remove all CVS generated information like e.g. revision IDs from drivers/s390 and include/asm-s390 (none present in arch/s390). - Add newline at end of arch/s390/lib/Makefile to avoid diff message. Acked-by: NAndreas Herrmann <aherrman@de.ibm.com> Acked-by: NFrank Pavlic <pavlic@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 11 11月, 2005 3 次提交
-
-
由 Frank Pavlic 提交于
[patch 6/7] s390: introduce guestLan sniffer support in qeth From: Peter Tiedemann <ptiedem@de.ibm.com> - introduce guestLan sniffer support in qeth feature allows a linux in a virtual machine guest to become a network LAN sniffer, monitoring and recording the networking traffic within an entire guestLan. Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com> diffstat: qeth.h | 2 + qeth_main.c | 93 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ qeth_mpc.h | 11 ++++--- 3 files changed, 102 insertions(+), 4 deletions(-) Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Frank Pavlic 提交于
[patch 5/7] s390: fix recovery failure of non-guestLAN devices From: Frank Pavlic <fpavlic@de.ibm.com> - Recovery of non-guestLAN Layer 2 device failed due to trying to register the real MAC address we got from the READ_MAC adapter parameters command. We have to keep the "old" MAC address when we process the reply of a READ_MAC. Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com> diffstat: qeth.h | 12 ++++++------ qeth_main.c | 27 ++++++++++++++++----------- 2 files changed, 22 insertions(+), 17 deletions(-) Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Frank Pavlic 提交于
[patch 1/7] s390: synthax checking for VIPA addresses fixed From: Peter Tiedemann <ptiedem@de.ibm.com> - synthax checking for VIPA addresses fixed Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com> diffstat: qeth.h | 65 ++++++++++++++++++++++++++++++++++++++++++++++++------------- qeth_sys.c | 6 ++--- 2 files changed, 55 insertions(+), 16 deletions(-) Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
- 04 10月, 2005 2 次提交
-
-
由 Ursula Braun 提交于
This patch introduces new feature in qeth: qeth enhancement provides the device driver support for the Communication Controller for Linux on System z9 and zSeries (CCL), which is software that enables running the Network Control Program (NCP) on a zSeries machine. The OSA CDLC support is based on a new IBM mainframe CHPID type called Open Systems Adaper for NCP (OSN). In case of OSN qeth communicates with the type-OSN OSA-card on one hand, and with the CCL-kernel-component Network Device Handler (NDH) on the other. Signed-off-by: NFrank Pavlic <pavlic@de.ibm.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Ursula Braun 提交于
From: Peter Tiedemann <ptiedem@de.ibm.com> From: Frank Pavlic <pavlic@de.ibm.com> minor qeth fixes: - free old skb in qeth_realloc_headroom after duplicating skb - disable IPV6 support for Hipersockets devices - call ccw_device_set_offline on every channel regardless of the return value of the prior ccw_device_set_offline calls - allocate qdio structures in DMA-area - schedule recovery of appropriate card when cable has been inserted again. - add missing initialization of card->lock - write sequence number in skb->cb for SNA protocol which requires strictly serialized packets. Signed-off-by: NFrank Pavlic <pavlic@de.ibm.com> diffstat: qeth.h | 2 ++ qeth_main.c | 37 +++++++++++++++++-------------------- 2 files changed, 19 insertions(+), 20 deletions(-) Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
- 15 9月, 2005 2 次提交
-
-
由 Frank Pavlic 提交于
[patch 4/4] s390: qeth driver fixes . From: Frank Pavlic <pavlic@de.ibm.com> - Clear read channel first prior to using ccw_device_set_offline. - use QETH_DBF_TEXT instead of QETH_DBF_SPRINTF - invoke qeth_halt_channel and qeth_clear_channel for all channels, even if halt/clear for one of the channel fails. - enable qeth_arp_query function for GuestLAN devices Signed-off-by: NFrank Pavlic <pavlic@de.ibm.com> diffstat: qeth.h | 2 - qeth_main.c | 106 +++++++++++++++++++++++++----------------------------------- qeth_sys.c | 11 +++--- 3 files changed, 53 insertions(+), 66 deletions(-) Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Frank Pavlic 提交于
Jeff, I'm sorry seems that they have not been sent out either ... ok here they come ... [patch 3/4] s390: TSO related fixes in qeth driver From: Frank Pavlic <pavlic@de.ibm.com> TSO related fixes : - changing value of large_send attribute while network traffic is running caused program check and thus device recovery. - Due to hardware restriction discard packet when it exceeds 60K otherwise qeth will cause program checks and thus traffic stall when trying to send such huge packets. Signed-off-by: NFrank Pavlic <pavlic@de.ibm.com> diffstat: qeth.h | 4 ++-- qeth_main.c | 33 +++++++++++++++++++++------------ qeth_sys.c | 10 +++------- 3 files changed, 26 insertions(+), 21 deletions(-) Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
- 28 7月, 2005 1 次提交
-
-
由 Jesper Juhl 提交于
`gcc -W' likes to complain if the static keyword is not at the beginning of the declaration. This patch fixes all remaining occurrences of "inline static" up with "static inline" in the entire kernel tree (140 occurrences in 47 files). While making this change I came across a few lines with trailing whitespace that I also fixed up, I have also added or removed a blank line or two here and there, but there are no functional changes in the patch. Signed-off-by: NJesper Juhl <juhl-lkml@dif.dk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-