commit b6bf9171ef5c37b66d446378ba63af5339a56a97 upstream.

Ext4 does not always reduce the reserved cluster count by the number
of clusters allocated when mapping a delayed extent.  It sometimes
adds back one or more clusters after allocation if delalloc blocks
adjacent to the range allocated by ext4_ext_map_blocks() share the
clusters newly allocated for that range.  However, this overcounts
the number of clusters needed to satisfy future mapping requests
(holding one or more reservations for clusters that have already been
allocated) and premature ENOSPC and quota failures, etc., result.

Ext4 also does not reduce the reserved cluster count when allocating
clusters for non-delayed allocated writes that have previously been
reserved for delayed writes.  This also results in overcounts.

To make it possible to handle reserved cluster accounting for
fallocated regions in the same manner as used for other non-delayed
writes, do the reserved cluster accounting for them at the time of
allocation.  In the current code, this is only done later when a
delayed extent sharing the fallocated region is finally mapped.

Address comment correcting handling of unsigned long long constant
from Jan Kara's review of RFC version of this patch.
Signed-off-by: NEric Whitney <enwlinux@gmail.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>

commit 0b02f4c0d6d9e2c611dfbdd4317193e9dca740e6 upstream.

The code in ext4_da_map_blocks sometimes reserves space for more
delayed allocated clusters than it should, resulting in premature
ENOSPC, exceeded quota, and inaccurate free space reporting.

Fix this by checking for written and unwritten blocks shared in the
same cluster with the newly delayed allocated block.  A cluster
reservation should not be made for a cluster for which physical space
has already been allocated.
Signed-off-by: NEric Whitney <enwlinux@gmail.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>

commit 1dc0aa46e74a3366e12f426b7caaca477853e9c3 upstream.

Add new pending reservation mechanism to help manage reserved cluster
accounting.  Its primary function is to avoid the need to read extents
from the disk when invalidating pages as a result of a truncate, punch
hole, or collapse range operation.
Signed-off-by: NEric Whitney <enwlinux@gmail.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>

commit ad431025aecda85d3ebef5e4a3aca5c1c681d0c7 upstream.

Ext4 contains a few functions that are used to search for delayed
extents or blocks in the extents status tree.  Rather than duplicate
code to add new functions to search for extents with different status
values, such as written or a combination of delayed and unwritten,
generalize the existing code to search for caller-specified extents
status values.  Also, move this code into extents_status.c where it
is better associated with the data structures it operates upon, and
where it can be more readily used to implement new extents status tree
functions that might want a broader scope for i_es_lock.

Three missing static specifiers in RFC version of patch reported and
fixed by Fengguang Wu <fengguang.wu@intel.com>.
Signed-off-by: NEric Whitney <enwlinux@gmail.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>

[ Upstream commit 27da0d2ef998e222a876c0cec72aa7829a626266 ]

A bugfix just broke compilation of appletalk when CONFIG_SYSCTL
is disabled:

In file included from net/appletalk/ddp.c:65:
net/appletalk/ddp.c: In function 'atalk_init':
include/linux/atalk.h:164:34: error: expected expression before 'do'
 #define atalk_register_sysctl()  do { } while(0)
                                  ^~
net/appletalk/ddp.c:1934:7: note: in expansion of macro 'atalk_register_sysctl'
  rc = atalk_register_sysctl();

This is easier to avoid by using conventional inline functions
as stubs rather than macros. The header already has inline
functions for other purposes, so I'm changing over all the
macros for consistency.

Fixes: 6377f787aeb9 ("appletalk: Fix use-after-free in atalk_proc_exit")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

In upstream branch this fixed by commit b29940c1abd7 ("mm: rename and
change semantics of nr_indirectly_reclaimable_bytes").

This fixes /sys/devices/system/node/node*/vmstat format:

...
nr_dirtied 6613155
nr_written 5796802
 11089216
...

Cc: <stable@vger.kernel.org> # 4.19.y
Fixes: 7aaf7727 ("mm: don't show nr_indirectly_reclaimable in /proc/vmstat")
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Roman Gushchin <guro@fb.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[fixed differently upstream, this is a work-around to resolve it for 4.19.y]

Yongqin reported that /proc/zoneinfo format is broken in 4.14
due to commit 7aaf7727 ("mm: don't show nr_indirectly_reclaimable
in /proc/vmstat")

Node 0, zone      DMA
  per-node stats
      nr_inactive_anon 403
      nr_active_anon 89123
      nr_inactive_file 128887
      nr_active_file 47377
      nr_unevictable 2053
      nr_slab_reclaimable 7510
      nr_slab_unreclaimable 10775
      nr_isolated_anon 0
      nr_isolated_file 0
      <...>
      nr_vmscan_write 0
      nr_vmscan_immediate_reclaim 0
      nr_dirtied   6022
      nr_written   5985
                   74240
      ^^^^^^^^^^
  pages free     131656

The problem is caused by the nr_indirectly_reclaimable counter,
which is hidden from the /proc/vmstat, but not from the
/proc/zoneinfo. Let's fix this inconsistency and hide the
counter from /proc/zoneinfo exactly as from /proc/vmstat.

BTW, in 4.19+ the counter has been renamed and exported by
the commit b29940c1abd7 ("mm: rename and change semantics of
nr_indirectly_reclaimable_bytes"), so there is no such a problem
anymore.

Cc: <stable@vger.kernel.org> # 4.14.x-4.18.x
Fixes: 7aaf7727 ("mm: don't show nr_indirectly_reclaimable in /proc/vmstat")
Reported-by: NYongqin Liu <yongqin.liu@linaro.org>
Signed-off-by: NRoman Gushchin <guro@fb.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 662d66466637862ef955f7f6e78a286d8cf0ebef upstream.

When a QP is put into error state, all pending requests in the send work
queue should be drained. The following sequence of events could lead to a
failure, causing a request to hang:

(1) The QP builds a packet and tries to send through SDMA engine.
    However, PIO engine is still busy. Consequently, this packet is put on
    the QP's tx list and the QP is put on the PIO waiting list. The field
    qp->s_flags is set with HFI1_S_WAIT_PIO_DRAIN;

(2) The QP is put into error state by the user application and
    notify_error_qp() is called, which removes the QP from the PIO waiting
    list and the packet from the QP's tx list. In addition, qp->s_flags is
    cleared of RVT_S_ANY_WAIT_IO bits, which does not include
    HFI1_S_WAIT_PIO_DRAIN bit;

(3) The hfi1_schdule_send() function is called to drain the QP's send
    queue. Subsequently, hfi1_do_send() is called. Since the flag bit
    HFI1_S_WAIT_PIO_DRAIN is set in qp->s_flags, hfi1_send_ok() fails.  As
    a result, hfi1_do_send() bails out without draining any request from
    the send queue;

(4) The PIO engine completes the sending and tries to wake up any QP on
    its waiting list. But the QP has been removed from the PIO waiting
    list and therefore is kept in sleep forever.

The fix is to clear qp->s_flags of HFI1_S_ANY_WAIT_IO bits in step (2).
HFI1_S_ANY_WAIT_IO includes RVT_S_ANY_WAIT_IO and HFI1_S_WAIT_PIO_DRAIN.

Fixes: 2e2ba09e ("IB/rdmavt, IB/hfi1: Create device dependent s_flags")
Cc: <stable@vger.kernel.org> # 4.19.x+
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: NAlex Estrin <alex.estrin@intel.com>
Signed-off-by: NKaike Wan <kaike.wan@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 1da6c4d9140cb7c13e87667dc4e1488d6c8fc10f ]

syzkaller was able to generate the following UAF in bpf:

  BUG: KASAN: use-after-free in lookup_last fs/namei.c:2269 [inline]
  BUG: KASAN: use-after-free in path_lookupat.isra.43+0x9f8/0xc00 fs/namei.c:2318
  Read of size 1 at addr ffff8801c4865c47 by task syz-executor2/9423

  CPU: 0 PID: 9423 Comm: syz-executor2 Not tainted 4.20.0-rc1-next-20181109+
  #110
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
  Google 01/01/2011
  Call Trace:
    __dump_stack lib/dump_stack.c:77 [inline]
    dump_stack+0x244/0x39d lib/dump_stack.c:113
    print_address_description.cold.7+0x9/0x1ff mm/kasan/report.c:256
    kasan_report_error mm/kasan/report.c:354 [inline]
    kasan_report.cold.8+0x242/0x309 mm/kasan/report.c:412
    __asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:430
    lookup_last fs/namei.c:2269 [inline]
    path_lookupat.isra.43+0x9f8/0xc00 fs/namei.c:2318
    filename_lookup+0x26a/0x520 fs/namei.c:2348
    user_path_at_empty+0x40/0x50 fs/namei.c:2608
    user_path include/linux/namei.h:62 [inline]
    do_mount+0x180/0x1ff0 fs/namespace.c:2980
    ksys_mount+0x12d/0x140 fs/namespace.c:3258
    __do_sys_mount fs/namespace.c:3272 [inline]
    __se_sys_mount fs/namespace.c:3269 [inline]
    __x64_sys_mount+0xbe/0x150 fs/namespace.c:3269
    do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
    entry_SYSCALL_64_after_hwframe+0x49/0xbe
  RIP: 0033:0x457569
  Code: fd b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7
  48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
  ff 0f 83 cb b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00
  RSP: 002b:00007fde6ed96c78 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
  RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 0000000000457569
  RDX: 0000000020000040 RSI: 0000000020000000 RDI: 0000000000000000
  RBP: 000000000072bf00 R08: 0000000020000340 R09: 0000000000000000
  R10: 0000000000200000 R11: 0000000000000246 R12: 00007fde6ed976d4
  R13: 00000000004c2c24 R14: 00000000004d4990 R15: 00000000ffffffff

  Allocated by task 9424:
    save_stack+0x43/0xd0 mm/kasan/kasan.c:448
    set_track mm/kasan/kasan.c:460 [inline]
    kasan_kmalloc+0xc7/0xe0 mm/kasan/kasan.c:553
    __do_kmalloc mm/slab.c:3722 [inline]
    __kmalloc_track_caller+0x157/0x760 mm/slab.c:3737
    kstrdup+0x39/0x70 mm/util.c:49
    bpf_symlink+0x26/0x140 kernel/bpf/inode.c:356
    vfs_symlink+0x37a/0x5d0 fs/namei.c:4127
    do_symlinkat+0x242/0x2d0 fs/namei.c:4154
    __do_sys_symlink fs/namei.c:4173 [inline]
    __se_sys_symlink fs/namei.c:4171 [inline]
    __x64_sys_symlink+0x59/0x80 fs/namei.c:4171
    do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
    entry_SYSCALL_64_after_hwframe+0x49/0xbe

  Freed by task 9425:
    save_stack+0x43/0xd0 mm/kasan/kasan.c:448
    set_track mm/kasan/kasan.c:460 [inline]
    __kasan_slab_free+0x102/0x150 mm/kasan/kasan.c:521
    kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
    __cache_free mm/slab.c:3498 [inline]
    kfree+0xcf/0x230 mm/slab.c:3817
    bpf_evict_inode+0x11f/0x150 kernel/bpf/inode.c:565
    evict+0x4b9/0x980 fs/inode.c:558
    iput_final fs/inode.c:1550 [inline]
    iput+0x674/0xa90 fs/inode.c:1576
    do_unlinkat+0x733/0xa30 fs/namei.c:4069
    __do_sys_unlink fs/namei.c:4110 [inline]
    __se_sys_unlink fs/namei.c:4108 [inline]
    __x64_sys_unlink+0x42/0x50 fs/namei.c:4108
    do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
    entry_SYSCALL_64_after_hwframe+0x49/0xbe

In this scenario path lookup under RCU is racing with the final
unlink in case of symlinks. As Linus puts it in his analysis:

  [...] We actually RCU-delay the inode freeing itself, but
  when we do the final iput(), the "evict()" function is called
  synchronously. Now, the simple fix would seem to just RCU-delay
  the kfree() of the symlink data in bpf_evict_inode(). Maybe
  that's the right thing to do. [...]

Al suggested to piggy-back on the ->destroy_inode() callback in
order to implement RCU deferral there which can then kfree() the
inode->i_link eventually right before putting inode back into
inode cache. By reusing free_inode_nonrcu() from there we can
avoid the need for our own inode cache and just reuse generic
one as we currently do.

And in-fact on top of all this we should just get rid of the
bpf_evict_inode() entirely. This means truncate_inode_pages_final()
and clear_inode() will then simply be called by the fs core via
evict(). Dropping the reference should really only be done when
inode is unhashed and nothing reachable anymore, so it's better
also moved into the final ->destroy_inode() callback.

Fixes: 0f98621b ("bpf, inode: add support for symlinks and fix mtime/ctime")
Reported-by: syzbot+fb731ca573367b7f6564@syzkaller.appspotmail.com
Reported-by: syzbot+a13e5ead792d6df37818@syzkaller.appspotmail.com
Reported-by: syzbot+7a8ba368b47fdefca61e@syzkaller.appspotmail.com
Suggested-by: NAl Viro <viro@zeniv.linux.org.uk>
Analyzed-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Acked-by: NAl Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/lkml/0000000000006946d2057bbd0eef@google.com/T/Signed-off-by: NSasha Levin (Microsoft) <sashal@kernel.org>

[ Upstream commit a4046c06be50a4f01d435aa7fe57514818e6cc82 ]

Use offsetof() to calculate offset of a field to take advantage of
compiler built-in version when possible, and avoid UBSAN warning when
compiling with Clang:

  UBSAN: Undefined behaviour in mm/swapfile.c:3010:38
  member access within null pointer of type 'union swap_header'
  CPU: 6 PID: 1833 Comm: swapon Tainted: G S                4.19.23 #43
  Call trace:
   dump_backtrace+0x0/0x194
   show_stack+0x20/0x2c
   __dump_stack+0x20/0x28
   dump_stack+0x70/0x94
   ubsan_epilogue+0x14/0x44
   ubsan_type_mismatch_common+0xf4/0xfc
   __ubsan_handle_type_mismatch_v1+0x34/0x54
   __se_sys_swapon+0x654/0x1084
   __arm64_sys_swapon+0x1c/0x24
   el0_svc_common+0xa8/0x150
   el0_svc_compat_handler+0x2c/0x38
   el0_svc_compat+0x8/0x18

Link: http://lkml.kernel.org/r/20190312081902.223764-1-pihsun@chromium.orgSigned-off-by: NPi-Hsun Shih <pihsun@chromium.org>
Acked-by: NMichal Hocko <mhocko@suse.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit ca597bddedd94906cd761d8be6a3ad21292725de ]

As Seulbae Kim reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=202637

We didn't recover permission field correctly after sudden power-cut,
the reason is in setattr we didn't add inode into global dirty list
once i_mode is changed, so latter checkpoint triggered by fsync will
not flush last i_mode into disk, result in this problem, fix it.
Reported-by: NSeulbae Kim <seulbae@gatech.edu>
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 930c9f9125c85b5134b3e711bc252ecc094708e3 ]

rxrpc_disconnect_client_call() reads the call's connection ID protocol
value (call->cid) as part of that function's variable declarations.  This
is bad because it's not inside the locked section and so may race with
someone granting use of the channel to the call.

This manifests as an assertion failure (see below) where the call in the
presumed channel (0 because call->cid wasn't set when we read it) doesn't
match the call attached to the channel we were actually granted (if 1, 2 or
3).

Fix this by moving the read and dependent calculations inside of the
channel_lock section.  Also, only set the channel number and pointer
variables if cid is not zero (ie. unset).

This problem can be induced by injecting an occasional error in
rxrpc_wait_for_channel() before the call to schedule().

Make two further changes also:

 (1) Add a trace for wait failure in rxrpc_connect_call().

 (2) Drop channel_lock before BUG'ing in the case of the assertion failure.

The failure causes a trace akin to the following:

rxrpc: Assertion failed - 18446612685268945920(0xffff8880beab8c00) == 18446612685268621312(0xffff8880bea69800) is false
------------[ cut here ]------------
kernel BUG at net/rxrpc/conn_client.c:824!
...
RIP: 0010:rxrpc_disconnect_client_call+0x2bf/0x99d
...
Call Trace:
 rxrpc_connect_call+0x902/0x9b3
 ? wake_up_q+0x54/0x54
 rxrpc_new_client_call+0x3a0/0x751
 ? rxrpc_kernel_begin_call+0x141/0x1bc
 ? afs_alloc_call+0x1b5/0x1b5
 rxrpc_kernel_begin_call+0x141/0x1bc
 afs_make_call+0x20c/0x525
 ? afs_alloc_call+0x1b5/0x1b5
 ? __lock_is_held+0x40/0x71
 ? lockdep_init_map+0xaf/0x193
 ? lockdep_init_map+0xaf/0x193
 ? __lock_is_held+0x40/0x71
 ? yfs_fs_fetch_data+0x33b/0x34a
 yfs_fs_fetch_data+0x33b/0x34a
 afs_fetch_data+0xdc/0x3b7
 afs_read_dir+0x52d/0x97f
 afs_dir_iterate+0xa0/0x661
 ? iterate_dir+0x63/0x141
 iterate_dir+0xa2/0x141
 ksys_getdents64+0x9f/0x11b
 ? filldir+0x111/0x111
 ? do_syscall_64+0x3e/0x1a0
 __x64_sys_getdents64+0x16/0x19
 do_syscall_64+0x7d/0x1a0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 45025bce ("rxrpc: Improve management and caching of client connection objects")
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Reviewed-by: NMarc Dionne <marc.dionne@auristor.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit cdc94a37493135e355dfc0b0e086d84e3eadb50d ]

fls counts bits starting from 1 to 32 (returns 0 for zero argument).  If
we add 1 we shift right one bit more and loose precision from divisor,
what cause function incorect results with some numbers.

Corrected code was tested in user-space, see bugzilla:
   https://bugzilla.kernel.org/show_bug.cgi?id=202391

Link: http://lkml.kernel.org/r/1548686944-11891-1-git-send-email-sgruszka@redhat.com
Fixes: 658716d1 ("div64_u64(): improve precision on 32bit platforms")
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Reported-by: NSiarhei Volkau <lis8215@gmail.com>
Tested-by: NSiarhei Volkau <lis8215@gmail.com>
Acked-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 6377f787aeb945cae7abbb6474798de129e1f3ac ]

KASAN report this:

BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71
Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806

CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xfa/0x1ce lib/dump_stack.c:113
 print_address_description+0x65/0x270 mm/kasan/report.c:187
 kasan_report+0x149/0x18d mm/kasan/report.c:317
 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71
 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667
 atalk_proc_exit+0x18/0x820 [appletalk]
 atalk_exit+0xf/0x5a [appletalk]
 __do_sys_delete_module kernel/module.c:1018 [inline]
 __se_sys_delete_module kernel/module.c:961 [inline]
 __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961
 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0
RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc
R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff

Allocated by task 2806:
 set_track mm/kasan/common.c:85 [inline]
 __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496
 slab_post_alloc_hook mm/slab.h:444 [inline]
 slab_alloc_node mm/slub.c:2739 [inline]
 slab_alloc mm/slub.c:2747 [inline]
 kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752
 kmem_cache_zalloc include/linux/slab.h:730 [inline]
 __proc_create+0x30f/0xa20 fs/proc/generic.c:408
 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469
 0xffffffffc10c01bb
 0xffffffffc10c0166
 do_one_initcall+0xfa/0x5ca init/main.c:887
 do_init_module+0x204/0x5f6 kernel/module.c:3460
 load_module+0x66b2/0x8570 kernel/module.c:3808
 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 2806:
 set_track mm/kasan/common.c:85 [inline]
 __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458
 slab_free_hook mm/slub.c:1409 [inline]
 slab_free_freelist_hook mm/slub.c:1436 [inline]
 slab_free mm/slub.c:2986 [inline]
 kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002
 pde_put+0x6e/0x80 fs/proc/generic.c:647
 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684
 0xffffffffc10c031c
 0xffffffffc10c0166
 do_one_initcall+0xfa/0x5ca init/main.c:887
 do_init_module+0x204/0x5f6 kernel/module.c:3460
 load_module+0x66b2/0x8570 kernel/module.c:3808
 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8881f41fe500
 which belongs to the cache proc_dir_entry of size 256
The buggy address is located 176 bytes inside of
 256-byte region [ffff8881f41fe500, ffff8881f41fe600)
The buggy address belongs to the page:
page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0
flags: 0x2fffc0000000200(slab)
raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00
raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
 ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                     ^
 ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
 ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

It should check the return value of atalk_proc_init fails,
otherwise atalk_exit will trgger use-after-free in pde_subdir_find
while unload the module.This patch fix error cleanup path of atalk_init
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit cac734c2dbd2514f14c8c6a17caba1990d83bf1d ]

if use the legacy method to allocate object, when mqd_hiq need to run
uninit code, it will be cause WARNING call trace.

eg: (s3 suspend test)
[   34.918944] Call Trace:
[   34.918948]  [<ffffffff92961dc1>] dump_stack+0x19/0x1b
[   34.918950]  [<ffffffff92297648>] __warn+0xd8/0x100
[   34.918951]  [<ffffffff9229778d>] warn_slowpath_null+0x1d/0x20
[   34.918991]  [<ffffffffc03ce1fe>] uninit_mqd_hiq_sdma+0x4e/0x50 [amdgpu]
[   34.919028]  [<ffffffffc03d0ef7>] uninitialize+0x37/0xe0 [amdgpu]
[   34.919064]  [<ffffffffc03d15a6>] kernel_queue_uninit+0x16/0x30 [amdgpu]
[   34.919086]  [<ffffffffc03d26c2>] pm_uninit+0x12/0x20 [amdgpu]
[   34.919107]  [<ffffffffc03d4915>] stop_nocpsch+0x15/0x20 [amdgpu]
[   34.919129]  [<ffffffffc03c1dce>] kgd2kfd_suspend.part.4+0x2e/0x50 [amdgpu]
[   34.919150]  [<ffffffffc03c2667>] kgd2kfd_suspend+0x17/0x20 [amdgpu]
[   34.919171]  [<ffffffffc03c103a>] amdgpu_amdkfd_suspend+0x1a/0x20 [amdgpu]
[   34.919187]  [<ffffffffc02ec428>] amdgpu_device_suspend+0x88/0x3a0 [amdgpu]
[   34.919189]  [<ffffffff922e22cf>] ? enqueue_entity+0x2ef/0xbe0
[   34.919205]  [<ffffffffc02e8220>] amdgpu_pmops_suspend+0x20/0x30 [amdgpu]
[   34.919207]  [<ffffffff925c56ff>] pci_pm_suspend+0x6f/0x150
[   34.919208]  [<ffffffff925c5690>] ? pci_pm_freeze+0xf0/0xf0
[   34.919210]  [<ffffffff926b45c6>] dpm_run_callback+0x46/0x90
[   34.919212]  [<ffffffff926b49db>] __device_suspend+0xfb/0x2a0
[   34.919213]  [<ffffffff926b4b9f>] async_suspend+0x1f/0xa0
[   34.919214]  [<ffffffff922c918f>] async_run_entry_fn+0x3f/0x130
[   34.919216]  [<ffffffff922b9d4f>] process_one_work+0x17f/0x440
[   34.919217]  [<ffffffff922bade6>] worker_thread+0x126/0x3c0
[   34.919218]  [<ffffffff922bacc0>] ? manage_workers.isra.25+0x2a0/0x2a0
[   34.919220]  [<ffffffff922c1c31>] kthread+0xd1/0xe0
[   34.919221]  [<ffffffff922c1b60>] ? insert_kthread_work+0x40/0x40
[   34.919222]  [<ffffffff92974c1d>] ret_from_fork_nospec_begin+0x7/0x21
[   34.919224]  [<ffffffff922c1b60>] ? insert_kthread_work+0x40/0x40
[   34.919224] ---[ end trace 38cd9f65c963adad ]---
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NOak Zeng <Oak.Zeng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 143c2a89e0e5fda6c6fd08d7bc1126438c19ae90 ]

When running kprobe on -rt kernel, the below bug is caught:

|BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:931
|in_atomic(): 1, irqs_disabled(): 128, pid: 14, name: migration/0
|Preemption disabled at:[<802f2b98>] cpu_stopper_thread+0xc0/0x140
|CPU: 0 PID: 14 Comm: migration/0 Tainted: G O 4.8.3-rt2 #1
|Hardware name: Freescale LS1021A
|[<8025a43c>] (___might_sleep)
|[<80b5b324>] (rt_spin_lock)
|[<80b5c31c>] (__patch_text_real)
|[<80b5c3ac>] (patch_text_stop_machine)
|[<802f2920>] (multi_cpu_stop)

Since patch_text_stop_machine() is called in stop_machine() which
disables IRQ, sleepable lock should be not used in this atomic context,
 so replace patch_lock to raw lock.
Signed-off-by: NYang Shi <yang.shi@linaro.org>
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit fc782242749fa4235592854fafe1a1297583c1fb ]

GF117 appears to use the same register as GK104 (but still with the
general Fermi readout mechanism).

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108980Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 85b0cae89d5266e6a7abb2e83c6f716326fc494c ]

Gigabyte X299 DESIGNARE EX motherboard has one PCIe root port that is
connected to an Alpine Ridge Thunderbolt controller.  This port has slot
implemented bit set in the config space but other than that it is not
hotplug capable in the sense we are expecting in Linux (it has
dev->is_hotplug_bridge set to 0):

  00:1c.4 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #5
    Bus: primary=00, secondary=05, subordinate=46, sec-latency=0
    Memory behind bridge: 78000000-8fffffff [size=384M]
    Prefetchable memory behind bridge: 00003800f8000000-00003800ffffffff [size=128M]
    ...
    Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
    ...
      SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
	      Slot #8, PowerLimit 25.000W; Interlock- NoCompl+
      SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
	      Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
      SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
	      Changed: MRL- PresDet+ LinkState+

This system is using ACPI based hotplug to notify the OS that it needs to
rescan the PCI bus (ACPI hotplug).

If there is nothing connected in any of the Thunderbolt ports the root port
will not have any runtime PM active children and is thus automatically
runtime suspended pretty soon after boot by PCI PM core.  Now, when a
device is connected the BIOS SMI handler responsible for enumerating newly
added devices is not able to find anything because the port is in D3.

Prevent this from happening by blacklisting PCI power management of this
particular Gigabyte system.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=202031Reported-by: NKedar A Dongre <kedar.a.dongre@intel.com>
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a0f890aba2be33377f4eb24e13633c4a76a68f38 ]

This patch is to add the AMBA device ID for CA73 CPU, so that CPU debug
module can be initialized successfully when a SoC contain CA73 CPUs.

This patch has been verified on 96boards Hikey960.
Signed-off-by: NLeo Yan <leo.yan@linaro.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit b6a3e1475b0220378ad32bdf4d8692f058b1fc03 ]

On some Samsung hardware, it is necessary to clear events accumulated by
the EC during sleep. These ECs stop reporting GPEs until they are manually
polled, if too many events are accumulated.
Thus the CLEAR_ON_RESUME quirk is introduced to send EC query commands
unconditionally after resume to clear all the EC query events on those
platforms.

Later, commit 4c237371 ("ACPI / EC: Remove old CLEAR_ON_RESUME quirk")
removes the CLEAR_ON_RESUME quirk because we thought the new EC IRQ
polling logic should handle this case.

Now it has been proved that the EC IRQ Polling logic does not fix the
issue actually because we got regression report on these Samsung
platforms after removing the quirk.

Thus revert commit 4c237371 ("ACPI / EC: Remove old CLEAR_ON_RESUME
quirk") to introduce back the Samsung quirk in this patch.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=44161Tested-by: NOrtwin Glück <odi@odi.ch>
Tested-by: NFrancisco Cribari <cribari@gmail.com>
Tested-by: NBalazs Varga <balazs4web@gmail.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c34a83820f59bb275e5f2d55cd5ea99c64f6ef23 ]

Clients may submit a new requests from the completion callback
context. The driver was not prepared to receive a request in this
state because it already held the request queue lock and a recursive
lock error is triggered.

Now all completions are queued up until we are ready to drop the queue
lock and then delivered.

The fault was triggered by TCP over an IPsec connection in the LTP
test suite:
  LTP: starting tcp4_ipsec02 (tcp_ipsec.sh -p ah -m transport -s "100 1000 65535")
  BUG: spinlock recursion on CPU#1, genload/943
   lock: 0xbf3c3094, .magic: dead4ead, .owner: genload/943, .owner_cpu: 1
  CPU: 1 PID: 943 Comm: genload Tainted: G           O    4.9.62-axis5-devel #6
  Hardware name: Axis ARTPEC-6 Platform
   (unwind_backtrace) from [<8010d134>] (show_stack+0x18/0x1c)
   (show_stack) from [<803a289c>] (dump_stack+0x84/0x98)
   (dump_stack) from [<8016e164>] (do_raw_spin_lock+0x124/0x128)
   (do_raw_spin_lock) from [<804de1a4>] (artpec6_crypto_submit+0x2c/0xa0)
   (artpec6_crypto_submit) from [<804def38>] (artpec6_crypto_prepare_submit_hash+0xd0/0x54c)
   (artpec6_crypto_prepare_submit_hash) from [<7f3165f0>] (ah_output+0x2a4/0x3dc [ah4])
   (ah_output [ah4]) from [<805df9bc>] (xfrm_output_resume+0x178/0x4a4)
   (xfrm_output_resume) from [<805d283c>] (xfrm4_output+0xac/0xbc)
   (xfrm4_output) from [<80587928>] (ip_queue_xmit+0x140/0x3b4)
   (ip_queue_xmit) from [<805a13b4>] (tcp_transmit_skb+0x4c4/0x95c)
   (tcp_transmit_skb) from [<8059f218>] (tcp_rcv_state_process+0xdf4/0xdfc)
   (tcp_rcv_state_process) from [<805a7530>] (tcp_v4_do_rcv+0x64/0x1ac)
   (tcp_v4_do_rcv) from [<805a9724>] (tcp_v4_rcv+0xa34/0xb74)
   (tcp_v4_rcv) from [<80581d34>] (ip_local_deliver_finish+0x78/0x2b0)
   (ip_local_deliver_finish) from [<8058259c>] (ip_local_deliver+0xe4/0x104)
   (ip_local_deliver) from [<805d23ec>] (xfrm4_transport_finish+0xf4/0x144)
   (xfrm4_transport_finish) from [<805df564>] (xfrm_input+0x4f4/0x74c)
   (xfrm_input) from [<804de420>] (artpec6_crypto_task+0x208/0x38c)
   (artpec6_crypto_task) from [<801271b0>] (tasklet_action+0x60/0xec)
   (tasklet_action) from [<801266d4>] (__do_softirq+0xcc/0x3a4)
   (__do_softirq) from [<80126d20>] (irq_exit+0xf4/0x15c)
   (irq_exit) from [<801741e8>] (__handle_domain_irq+0x68/0xbc)
   (__handle_domain_irq) from [<801014f0>] (gic_handle_irq+0x50/0x94)
   (gic_handle_irq) from [<80657370>] (__irq_usr+0x50/0x80)
Signed-off-by: NLars Persson <larper@axis.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 46f3ceaffa81e846677bca8668e0ad40e643cffd ]

Move mipi_dsi_dcs_set_display_off() from innolux_panel_disable()
to innolux_panel_unprepare(), so they are consistent with
innolux_panel_enable() and innolux_panel_prepare().

This also fixes some mode check and irq timeout issue in MTK dsi code.

Since some dsi code (e.g. mtk_dsi) have following call trace:
1. drm_panel_disable(), which calls innolux_panel_disable()
2. switch to cmd mode
3. drm_panel_unprepare(), which calls innolux_panel_unprepare()

However, mtk_dsi needs to be in cmd mode to be able to send commands
(e.g. mipi_dsi_dcs_set_display_off() and mipi_dsi_dcs_enter_sleep_mode()),
so we need these functions to be called after the switch to cmd mode happens,
i.e. in innolux_panel_unprepare.
Signed-off-by: NHsin-Yi, Wang <hsinyi@chromium.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190109065922.231753-1-hsinyi@chromium.orgSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 59a12205d3c32aee4c13ca36889fdf7cfed31126 ]

Introduce lkdtm tests for NULL pointer dereference: check access or exec
at NULL address, since these errors tend to be reported differently from
the general fault error text. For example from x86:

    pr_alert("BUG: unable to handle kernel %s at %px\n",
        address < PAGE_SIZE ? "NULL pointer dereference" : "paging request",
        (void *)address);
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 4c411157a42f122051ae3469bee0b5cabe89e139 ]

Today, when doing a lkdtm test before the readiness of the
random generator, (ptrval) is printed instead of the address
at which it perform the fault:

[ 1597.337030] lkdtm: Performing direct entry EXEC_USERSPACE
[ 1597.337142] lkdtm: attempting ok execution at (ptrval)
[ 1597.337398] lkdtm: attempting bad execution at (ptrval)
[ 1597.337460] kernel tried to execute user page (77858000) -exploit attempt? (uid: 0)
[ 1597.344769] Unable to handle kernel paging request for instruction fetch
[ 1597.351392] Faulting instruction address: 0x77858000
[ 1597.356312] Oops: Kernel access of bad area, sig: 11 [#1]

If the lkdtm test is done later on, it prints an hashed address.

In both cases this is pointless. The purpose of the test is to
ensure the kernel generates an Oops at the expected address,
so real addresses needs to be printed. This patch fixes that.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit b6e1fd17a38bd1d97c11d69fd3207b3ef9bfa4b3 ]

This fixes splats like the one below if CONFIG_DEBUG_ATOMIC_SLEEP=y
and machine (Tegra30) booted with SMP=n or all secondary CPU's are put
offline. Locking isn't needed because it protects atomic operation.

BUG: sleeping function called from invalid context at kernel/locking/mutex.c:254
in_atomic(): 1, irqs_disabled(): 128, pid: 0, name: swapper/0
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G         C        4.18.0-next-20180821-00180-gc3ebb6544e44-dirty #823
Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
[<c01134f4>] (unwind_backtrace) from [<c010db2c>] (show_stack+0x20/0x24)
[<c010db2c>] (show_stack) from [<c0bd0f3c>] (dump_stack+0x94/0xa8)
[<c0bd0f3c>] (dump_stack) from [<c0151df8>] (___might_sleep+0x13c/0x174)
[<c0151df8>] (___might_sleep) from [<c0151ea0>] (__might_sleep+0x70/0xa8)
[<c0151ea0>] (__might_sleep) from [<c0bec2b8>] (mutex_lock+0x2c/0x70)
[<c0bec2b8>] (mutex_lock) from [<c0589844>] (tegra_powergate_is_powered+0x44/0xa8)
[<c0589844>] (tegra_powergate_is_powered) from [<c0581a60>] (tegra30_cpu_rail_off_ready+0x30/0x74)
[<c0581a60>] (tegra30_cpu_rail_off_ready) from [<c0122244>] (tegra30_idle_lp2+0xa0/0x108)
[<c0122244>] (tegra30_idle_lp2) from [<c0853438>] (cpuidle_enter_state+0x140/0x540)
[<c0853438>] (cpuidle_enter_state) from [<c08538a4>] (cpuidle_enter+0x40/0x4c)
[<c08538a4>] (cpuidle_enter) from [<c01595e0>] (call_cpuidle+0x30/0x48)
[<c01595e0>] (call_cpuidle) from [<c01599f8>] (do_idle+0x238/0x28c)
[<c01599f8>] (do_idle) from [<c0159d28>] (cpu_startup_entry+0x28/0x2c)
[<c0159d28>] (cpu_startup_entry) from [<c0be76c8>] (rest_init+0xd8/0xdc)
[<c0be76c8>] (rest_init) from [<c1200f50>] (start_kernel+0x41c/0x430)
Signed-off-by: NDmitry Osipenko <digetx@gmail.com>
Acked-by: NJon Hunter <jonathanh@nvidia.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 388b4e6a00bb3097278ed1648ac5a1cb48c894e6 ]

scsi_device_quiesce() and scsi_device_resume() are called during
system-wide suspend and resume. scsi_device_quiesce() only succeeds for
SCSI devices that are in one of the RUNNING, OFFLINE or TRANSPORT_OFFLINE
states (see also scsi_set_device_state()).  This patch avoids that the
following warning is triggered when resuming a system for which quiescing a
SCSI device failed:

WARNING: CPU: 2 PID: 11303 at drivers/scsi/scsi_lib.c:2600 scsi_device_resume+0x4f/0x58
CPU: 2 PID: 11303 Comm: kworker/u8:70 Not tainted 5.0.0-rc1+ #50
Hardware name: LENOVO 80E3/Lancer 5B2, BIOS A2CN45WW(V2.13) 08/04/2016
Workqueue: events_unbound async_run_entry_fn
Call Trace:
 scsi_dev_type_resume+0x2e/0x60
 async_run_entry_fn+0x32/0xd8
 process_one_work+0x1f4/0x420
 worker_thread+0x28/0x3c0
 kthread+0x118/0x130
 ret_from_fork+0x22/0x40

Cc: Przemek Socha <soprwa@gmail.com>
Reported-by: NPrzemek Socha <soprwa@gmail.com>
Fixes: 3a0a5299 ("block, scsi: Make SCSI quiesce and resume work reliably") # v4.15
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit cffaaf0c816238c45cd2d06913476c83eb50f682 ]

Commit 57384592 ("iommu/vt-d: Store bus information in RMRR PCI
device path") changed the type of the path data, however, the change in
path type was not reflected in size calculations.  Update to use the
correct type and prevent a buffer overflow.

This bug manifests in systems with deep PCI hierarchies, and can lead to
an overflow of the static allocated buffer (dmar_pci_notify_info_buf),
or can lead to overflow of slab-allocated data.

   BUG: KASAN: global-out-of-bounds in dmar_alloc_pci_notify_info+0x1d5/0x2e0
   Write of size 1 at addr ffffffff90445d80 by task swapper/0/1
   CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W       4.14.87-rt49-02406-gd0a0e96 #1
   Call Trace:
    ? dump_stack+0x46/0x59
    ? print_address_description+0x1df/0x290
    ? dmar_alloc_pci_notify_info+0x1d5/0x2e0
    ? kasan_report+0x256/0x340
    ? dmar_alloc_pci_notify_info+0x1d5/0x2e0
    ? e820__memblock_setup+0xb0/0xb0
    ? dmar_dev_scope_init+0x424/0x48f
    ? __down_write_common+0x1ec/0x230
    ? dmar_dev_scope_init+0x48f/0x48f
    ? dmar_free_unused_resources+0x109/0x109
    ? cpumask_next+0x16/0x20
    ? __kmem_cache_create+0x392/0x430
    ? kmem_cache_create+0x135/0x2f0
    ? e820__memblock_setup+0xb0/0xb0
    ? intel_iommu_init+0x170/0x1848
    ? _raw_spin_unlock_irqrestore+0x32/0x60
    ? migrate_enable+0x27a/0x5b0
    ? sched_setattr+0x20/0x20
    ? migrate_disable+0x1fc/0x380
    ? task_rq_lock+0x170/0x170
    ? try_to_run_init_process+0x40/0x40
    ? locks_remove_file+0x85/0x2f0
    ? dev_prepare_static_identity_mapping+0x78/0x78
    ? rt_spin_unlock+0x39/0x50
    ? lockref_put_or_lock+0x2a/0x40
    ? dput+0x128/0x2f0
    ? __rcu_read_unlock+0x66/0x80
    ? __fput+0x250/0x300
    ? __rcu_read_lock+0x1b/0x30
    ? mntput_no_expire+0x38/0x290
    ? e820__memblock_setup+0xb0/0xb0
    ? pci_iommu_init+0x25/0x63
    ? pci_iommu_init+0x25/0x63
    ? do_one_initcall+0x7e/0x1c0
    ? initcall_blacklisted+0x120/0x120
    ? kernel_init_freeable+0x27b/0x307
    ? rest_init+0xd0/0xd0
    ? kernel_init+0xf/0x120
    ? rest_init+0xd0/0xd0
    ? ret_from_fork+0x1f/0x40
   The buggy address belongs to the variable:
    dmar_pci_notify_info_buf+0x40/0x60

Fixes: 57384592 ("iommu/vt-d: Store bus information in RMRR PCI device path")
Signed-off-by: NJulia Cartwright <julia@ni.com>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit efcc9bcaf77c07df01371a7c34e50424c291f3ac ]

Fix a possible NULL pointer dereference in ip6erspan_set_version checking
nlattr data pointer

kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 7549 Comm: syz-executor432 Not tainted 5.0.0-rc6-next-20190218
#37
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:ip6erspan_set_version+0x5c/0x350 net/ipv6/ip6_gre.c:1726
Code: 07 38 d0 7f 08 84 c0 0f 85 9f 02 00 00 49 8d bc 24 b0 00 00 00 c6 43
54 01 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f
85 9a 02 00 00 4d 8b ac 24 b0 00 00 00 4d 85 ed 0f
RSP: 0018:ffff888089ed7168 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff8880869d6e58 RCX: 0000000000000000
RDX: 0000000000000016 RSI: ffffffff862736b4 RDI: 00000000000000b0
RBP: ffff888089ed7180 R08: 1ffff11010d3adcb R09: ffff8880869d6e58
R10: ffffed1010d3add5 R11: ffff8880869d6eaf R12: 0000000000000000
R13: ffffffff8931f8c0 R14: ffffffff862825d0 R15: ffff8880869d6e58
FS:  0000000000b3d880(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000184 CR3: 0000000092cc5000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
  ip6erspan_newlink+0x66/0x7b0 net/ipv6/ip6_gre.c:2210
  __rtnl_newlink+0x107b/0x16c0 net/core/rtnetlink.c:3176
  rtnl_newlink+0x69/0xa0 net/core/rtnetlink.c:3234
  rtnetlink_rcv_msg+0x465/0xb00 net/core/rtnetlink.c:5192
  netlink_rcv_skb+0x17a/0x460 net/netlink/af_netlink.c:2485
  rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5210
  netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
  netlink_unicast+0x536/0x720 net/netlink/af_netlink.c:1336
  netlink_sendmsg+0x8ae/0xd70 net/netlink/af_netlink.c:1925
  sock_sendmsg_nosec net/socket.c:621 [inline]
  sock_sendmsg+0xdd/0x130 net/socket.c:631
  ___sys_sendmsg+0x806/0x930 net/socket.c:2136
  __sys_sendmsg+0x105/0x1d0 net/socket.c:2174
  __do_sys_sendmsg net/socket.c:2183 [inline]
  __se_sys_sendmsg net/socket.c:2181 [inline]
  __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2181
  do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x440159
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7
48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fffa69156e8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 0000000000440159
RDX: 0000000000000000 RSI: 0000000020001340 RDI: 0000000000000003
RBP: 00000000006ca018 R08: 0000000000000001 R09: 00000000004002c8
R10: 0000000000000011 R11: 0000000000000246 R12: 00000000004019e0
R13: 0000000000401a70 R14: 0000000000000000 R15: 0000000000000000
Modules linked in:
---[ end trace 09f8a7d13b4faaa1 ]---
RIP: 0010:ip6erspan_set_version+0x5c/0x350 net/ipv6/ip6_gre.c:1726
Code: 07 38 d0 7f 08 84 c0 0f 85 9f 02 00 00 49 8d bc 24 b0 00 00 00 c6 43
54 01 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f
85 9a 02 00 00 4d 8b ac 24 b0 00 00 00 4d 85 ed 0f
RSP: 0018:ffff888089ed7168 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff8880869d6e58 RCX: 0000000000000000
RDX: 0000000000000016 RSI: ffffffff862736b4 RDI: 00000000000000b0
RBP: ffff888089ed7180 R08: 1ffff11010d3adcb R09: ffff8880869d6e58
R10: ffffed1010d3add5 R11: ffff8880869d6eaf R12: 0000000000000000
R13: ffffffff8931f8c0 R14: ffffffff862825d0 R15: ffff8880869d6e58
FS:  0000000000b3d880(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000184 CR3: 0000000092cc5000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Fixes: 4974d5f678ab ("net: ip6_gre: initialize erspan_ver just for erspan tunnels")
Reported-and-tested-by: syzbot+30191cf1057abd3064af@syzkaller.appspotmail.com
Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com>
Reviewed-by: NGreg Rose <gvrose8192@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c64316502008064c158fa40cc250665e461b0f2a ]

The SHA512 code we adopted from the OpenSSL project uses a rather
peculiar way to take the address of the round constant table: it
takes the address of the sha256_block_data_order() routine, and
substracts a constant known quantity to arrive at the base of the
table, which is emitted by the same assembler code right before
the routine's entry point.

However, recent versions of binutils have helpfully changed the
behavior of references emitted via an ADR instruction when running
in Thumb2 mode: it now takes the Thumb execution mode bit into
account, which is bit 0 af the address. This means the produced
table address also has bit 0 set, and so we end up with an address
value pointing 1 byte past the start of the table, which results
in crashes such as

  Unable to handle kernel paging request at virtual address bf825000
  pgd = 42f44b11
  [bf825000] *pgd=80000040206003, *pmd=5f1bd003, *pte=00000000
  Internal error: Oops: 207 [#1] PREEMPT SMP THUMB2
  Modules linked in: sha256_arm(+) sha1_arm_ce sha1_arm ...
  CPU: 7 PID: 396 Comm: cryptomgr_test Not tainted 5.0.0-rc6+ #144
  Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
  PC is at sha256_block_data_order+0xaaa/0xb30 [sha256_arm]
  LR is at __this_module+0x17fd/0xffffe800 [sha256_arm]
  pc : [<bf820bca>]    lr : [<bf824ffd>]    psr: 800b0033
  sp : ebc8bbe8  ip : faaabe1c  fp : 2fdd3433
  r10: 4c5f1692  r9 : e43037df  r8 : b04b0a5a
  r7 : c369d722  r6 : 39c3693e  r5 : 7a013189  r4 : 1580d26b
  r3 : 8762a9b0  r2 : eea9c2cd  r1 : 3e9ab536  r0 : 1dea4ae7
  Flags: Nzcv  IRQs on  FIQs on  Mode SVC_32  ISA Thumb  Segment user
  Control: 70c5383d  Table: 6b8467c0  DAC: dbadc0de
  Process cryptomgr_test (pid: 396, stack limit = 0x69e1fe23)
  Stack: (0xebc8bbe8 to 0xebc8c000)
  ...
  unwind: Unknown symbol address bf820bca
  unwind: Index not found bf820bca
  Code: 441a ea80 40f9 440a (f85e) 3b04
  ---[ end trace e560cce92700ef8a ]---

Given that this affects older kernels as well, in case they are built
with a recent toolchain, apply a minimal backportable fix, which is
to emit another non-code label at the start of the routine, and
reference that instead. (This is similar to the current upstream state
of this file in OpenSSL)
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 69216a545cf81b2b32d01948f7039315abaf75a0 ]

The SHA256 code we adopted from the OpenSSL project uses a rather
peculiar way to take the address of the round constant table: it
takes the address of the sha256_block_data_order() routine, and
substracts a constant known quantity to arrive at the base of the
table, which is emitted by the same assembler code right before
the routine's entry point.

However, recent versions of binutils have helpfully changed the
behavior of references emitted via an ADR instruction when running
in Thumb2 mode: it now takes the Thumb execution mode bit into
account, which is bit 0 af the address. This means the produced
table address also has bit 0 set, and so we end up with an address
value pointing 1 byte past the start of the table, which results
in crashes such as

  Unable to handle kernel paging request at virtual address bf825000
  pgd = 42f44b11
  [bf825000] *pgd=80000040206003, *pmd=5f1bd003, *pte=00000000
  Internal error: Oops: 207 [#1] PREEMPT SMP THUMB2
  Modules linked in: sha256_arm(+) sha1_arm_ce sha1_arm ...
  CPU: 7 PID: 396 Comm: cryptomgr_test Not tainted 5.0.0-rc6+ #144
  Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
  PC is at sha256_block_data_order+0xaaa/0xb30 [sha256_arm]
  LR is at __this_module+0x17fd/0xffffe800 [sha256_arm]
  pc : [<bf820bca>]    lr : [<bf824ffd>]    psr: 800b0033
  sp : ebc8bbe8  ip : faaabe1c  fp : 2fdd3433
  r10: 4c5f1692  r9 : e43037df  r8 : b04b0a5a
  r7 : c369d722  r6 : 39c3693e  r5 : 7a013189  r4 : 1580d26b
  r3 : 8762a9b0  r2 : eea9c2cd  r1 : 3e9ab536  r0 : 1dea4ae7
  Flags: Nzcv  IRQs on  FIQs on  Mode SVC_32  ISA Thumb  Segment user
  Control: 70c5383d  Table: 6b8467c0  DAC: dbadc0de
  Process cryptomgr_test (pid: 396, stack limit = 0x69e1fe23)
  Stack: (0xebc8bbe8 to 0xebc8c000)
  ...
  unwind: Unknown symbol address bf820bca
  unwind: Index not found bf820bca
  Code: 441a ea80 40f9 440a (f85e) 3b04
  ---[ end trace e560cce92700ef8a ]---

Given that this affects older kernels as well, in case they are built
with a recent toolchain, apply a minimal backportable fix, which is
to emit another non-code label at the start of the routine, and
reference that instead. (This is similar to the current upstream state
of this file in OpenSSL)
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f75a2804da391571563c4b6b29e7797787332673 ]

xfrm_state_put() moves struct xfrm_state to the GC list
and schedules the GC work to clean it up. On net exit call
path, xfrm_state_flush() is called to clean up and
xfrm_flush_gc() is called to wait for the GC work to complete
before exit.

However, this doesn't work because one of the ->destructor(),
ipcomp_destroy(), schedules the same GC work again inside
the GC work. It is hard to wait for such a nested async
callback. This is also why syzbot still reports the following
warning:

 WARNING: CPU: 1 PID: 33 at net/ipv6/xfrm6_tunnel.c:351 xfrm6_tunnel_net_exit+0x2cb/0x500 net/ipv6/xfrm6_tunnel.c:351
 ...
  ops_exit_list.isra.0+0xb0/0x160 net/core/net_namespace.c:153
  cleanup_net+0x51d/0xb10 net/core/net_namespace.c:551
  process_one_work+0xd0c/0x1ce0 kernel/workqueue.c:2153
  worker_thread+0x143/0x14a0 kernel/workqueue.c:2296
  kthread+0x357/0x430 kernel/kthread.c:246
  ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352

In fact, it is perfectly fine to bypass GC and destroy xfrm_state
synchronously on net exit call path, because it is in process context
and doesn't need a work struct to do any blocking work.

This patch introduces xfrm_state_put_sync() which simply bypasses
GC, and lets its callers to decide whether to use this synchronous
version. On net exit path, xfrm_state_fini() and
xfrm6_tunnel_net_exit() use it. And, as ipcomp_destroy() itself is
blocking, it can use xfrm_state_put_sync() directly too.

Also rename xfrm_state_gc_destroy() to ___xfrm_state_destroy() to
reflect this change.

Fixes: b48c05ab ("xfrm: Fix warning in xfrm6_tunnel_net_exit.")
Reported-and-tested-by: syzbot+e9aebef558e3ed673934@syzkaller.appspotmail.com
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit ea010070d0a7497253d5a6f919f6dd107450b31a ]

redundant copy_from_user in rds_sendmsg system call expose rds
to issue where rds_rdma_extra_size walk the rds iovec and and
calculate the number pf pages (sgs) it need to add to the tail of
rds message and later rds_cmsg_rdma_args copy the rds iovec again
and re calculate the same number and get different result causing
WARN_ON in rds_message_alloc_sgs.

fix this by doing the copy_from_user only once per rds_sendmsg
system call.

When issue occur the below dump is seen:

WARNING: CPU: 0 PID: 19789 at net/rds/message.c:316 rds_message_alloc_sgs+0x10c/0x160 net/rds/message.c:316
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 19789 Comm: syz-executor827 Not tainted 4.19.0-next-20181030+ #101
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x244/0x39d lib/dump_stack.c:113
 panic+0x2ad/0x55c kernel/panic.c:188
 __warn.cold.8+0x20/0x45 kernel/panic.c:540
 report_bug+0x254/0x2d0 lib/bug.c:186
 fixup_bug arch/x86/kernel/traps.c:178 [inline]
 do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:271
 do_invalid_op+0x36/0x40 arch/x86/kernel/traps.c:290
 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:969
RIP: 0010:rds_message_alloc_sgs+0x10c/0x160 net/rds/message.c:316
Code: c0 74 04 3c 03 7e 6c 44 01 ab 78 01 00 00 e8 2b 9e 35 fa 4c 89 e0 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d c3 e8 14 9e 35 fa <0f> 0b 31 ff 44 89 ee e8 18 9f 35 fa 45 85 ed 75 1b e8 fe 9d 35 fa
RSP: 0018:ffff8801c51b7460 EFLAGS: 00010293
RAX: ffff8801bc412080 RBX: ffff8801d7bf4040 RCX: ffffffff8749c9e6
RDX: 0000000000000000 RSI: ffffffff8749ca5c RDI: 0000000000000004
RBP: ffff8801c51b7490 R08: ffff8801bc412080 R09: ffffed003b5c5b67
R10: ffffed003b5c5b67 R11: ffff8801dae2db3b R12: 0000000000000000
R13: 000000000007165c R14: 000000000007165c R15: 0000000000000005
 rds_cmsg_rdma_args+0x82d/0x1510 net/rds/rdma.c:623
 rds_cmsg_send net/rds/send.c:971 [inline]
 rds_sendmsg+0x19a2/0x3180 net/rds/send.c:1273
 sock_sendmsg_nosec net/socket.c:622 [inline]
 sock_sendmsg+0xd5/0x120 net/socket.c:632
 ___sys_sendmsg+0x7fd/0x930 net/socket.c:2117
 __sys_sendmsg+0x11d/0x280 net/socket.c:2155
 __do_sys_sendmsg net/socket.c:2164 [inline]
 __se_sys_sendmsg net/socket.c:2162 [inline]
 __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2162
 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x44a859
Code: e8 dc e6 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 6b cb fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f1d4710ada8 EFLAGS: 00000297 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000006dcc28 RCX: 000000000044a859
RDX: 0000000000000000 RSI: 0000000020001600 RDI: 0000000000000003
RBP: 00000000006dcc20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000297 R12: 00000000006dcc2c
R13: 646e732f7665642f R14: 00007f1d4710b9c0 R15: 00000000006dcd2c
Kernel Offset: disabled
Rebooting in 86400 seconds..

Reported-by: syzbot+26de17458aeda9d305d8@syzkaller.appspotmail.com
Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Nshamir rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f941d3e41da7f86bdb9dcc1977c2bcc6b89bfe47 ]

There are systems in which non-wakeup GPEs fire during the "noirq"
suspend stage of suspending devices and that effectively prevents the
system that tries to suspend to idle from entering any low-power
state at all.  If the offending GPE fires regularly and often enough,
the system appears to be suspended, but in fact it is in a tight loop
over "noirq" suspend and "noirq" resume of devices all the time.

To prevent that from happening, disable all non-wakeup GPEs except
for the EC GPE for suspend-to-idle (the EC GPE is special, because
on some systems it has to be enabled for power button wakeup events
to be generated as expected).

Fixes: 147a7d9d (ACPI / PM: Do not reconfigure GPEs for suspend-to-idle)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=201987Reported-by: NZhang Rui <rui.zhang@intel.com>
Tested-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 8ac51bbc4cfec4ef08b03bef24b31e2d50ef8b37 ]

This patch solves bug 200501 'Only 2 of 4 speakers playing sound.'
It enables the front speakers on Huawei Matebook X Pro laptops.
These laptops come with Dolby Atmos sound system and these pins
configuration enables the front speakers.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200501Reviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NAyman Bagabas <ayman.bagabas@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 30f33126feca0fe16df9e9302ffc28a953e2eb37 ]

ttm_bo_glob and ttm_mem_glob are defined as structure instance, while
not allocated by kzalloc, so kfree should not be invoked to release
them anymore. Otherwise, it will cause the following kernel BUG when
unloading amdgpu module

[   48.419294] kernel BUG at /build/linux-5s7Xkn/linux-4.15.0/mm/slub.c:3894!
[   48.419352] invalid opcode: 0000 [#1] SMP PTI
[   48.419387] Modules linked in: amdgpu(OE-) amdchash(OE) amdttm(OE) amd_sched(OE) amdkcl(OE) amd_iommu_v2 drm_kms_helper drm i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi pcbc snd_seq snd_seq_device snd_timer aesni_intel snd soundcore joydev aes_x86_64 crypto_simd glue_helper cryptd input_leds mac_hid serio_raw binfmt_misc nfsd auth_rpcgss nfs_acl lockd grace sunrpc sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 8139too psmouse i2c_piix4 8139cp mii floppy pata_acpi
[   48.419782] CPU: 1 PID: 1281 Comm: modprobe Tainted: G           OE    4.15.0-20-generic #21-Ubuntu
[   48.419838] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[   48.419901] RIP: 0010:kfree+0x137/0x180
[   48.419934] RSP: 0018:ffffb02101273bf8 EFLAGS: 00010246
[   48.419974] RAX: ffffeee1418ad7e0 RBX: ffffffffc075f100 RCX: ffff8fed7fca7ed0
[   48.420025] RDX: 0000000000000000 RSI: 000000000003440e RDI: 0000000022400000
[   48.420073] RBP: ffffb02101273c10 R08: 0000000000000010 R09: ffff8fed7ffd3680
[   48.420121] R10: ffffeee1418ad7c0 R11: ffff8fed7ffd3000 R12: ffffffffc075e2c0
[   48.420169] R13: ffffffffc074ec10 R14: ffff8fed73063900 R15: ffff8fed737428e8
[   48.420216] FS:  00007fdc912ec540(0000) GS:ffff8fed7fc80000(0000) knlGS:0000000000000000
[   48.420267] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   48.420308] CR2: 000055fa40c30060 CR3: 000000023470a006 CR4: 00000000003606e0
[   48.420358] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   48.420405] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   48.420452] Call Trace:
[   48.420485]  ttm_bo_global_kobj_release+0x20/0x30 [amdttm]
[   48.420528]  kobject_release+0x6a/0x180
[   48.420562]  kobject_put+0x28/0x50
[   48.420595]  ttm_bo_global_release+0x36/0x50 [amdttm]
[   48.420636]  amdttm_bo_device_release+0x119/0x180 [amdttm]
[   48.420678]  ? amdttm_bo_clean_mm+0xa6/0xf0 [amdttm]
[   48.420760]  amdgpu_ttm_fini+0xc9/0x180 [amdgpu]
[   48.420821]  amdgpu_bo_fini+0x12/0x40 [amdgpu]
[   48.420889]  gmc_v9_0_sw_fini+0x40/0x50 [amdgpu]
[   48.420947]  amdgpu_device_fini+0x36f/0x4c0 [amdgpu]
[   48.421007]  amdgpu_driver_unload_kms+0xb4/0x150 [amdgpu]
[   48.421058]  drm_dev_unregister+0x46/0xf0 [drm]
[   48.421102]  drm_dev_unplug+0x12/0x70 [drm]
Signed-off-by: NTrigger Huang <Trigger.Huang@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 49ad712afa88c502831d37f7089d98eac441fb80 ]

The Image Signal Processor found on Cherry Trail devices is brought up in
D0 state on devices which have camera sensors attached to it. The ISP will
not enter D3 state again without some massaging of its registers beforehand
and the ISP not being in D3 state blocks the SoC from entering S0ix modes.

There was a driver for the ISP in drivers/staging but that got removed
again because it never worked. It does not seem likely that a real
driver for the ISP will be added to the mainline kernel anytime soon.

This commit adds a dummy driver which contains the necessary magic from
the staging driver to powerdown the ISP, so that Cherry Trail devices where
the ISP is used will properly use S0ix modes when suspended.

Together with other recent S0ix related fixes this allows S0ix modes to
be entered on e.g. a Chuwi Hi8 Pro and a HP x2 210.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=196915Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a1c6ca3c6de763459a6e93b644ec6518c890ba1c ]

It is possible to observe hung_task complaints when system goes to
suspend-to-idle state:

 # echo freeze > /sys/power/state

 PM: Syncing filesystems ... done.
 Freezing user space processes ... (elapsed 0.001 seconds) done.
 OOM killer disabled.
 Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
 sd 0:0:0:0: [sda] Synchronizing SCSI cache
 INFO: task bash:1569 blocked for more than 120 seconds.
       Not tainted 4.19.0-rc3_+ #687
 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
 bash            D    0  1569    604 0x00000000
 Call Trace:
  ? __schedule+0x1fe/0x7e0
  schedule+0x28/0x80
  suspend_devices_and_enter+0x4ac/0x750
  pm_suspend+0x2c0/0x310

Register a PM notifier to disable the detector on suspend and re-enable
back on wakeup.
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 3b7960caceafdfc2cdfe2850487f8d091eb41144 ]

In cases where queryinfo fails, we have cases in cifs (vers=1.0)
where with backupuid mounts we retry the query info with findfirst.
This doesn't work to some NetApp servers which don't support
WindowsXP (and later) infolevel 261 (SMB_FIND_FILE_ID_FULL_DIR_INFO)
so in this case use other info levels (in this case it will usually
be level 257, SMB_FIND_FILE_DIRECTORY_INFO).

(Also fixes some indentation)

See kernel bugzilla 201435
Signed-off-by: NSteve French <stfrench@microsoft.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 487e2e22ab7968f2c0c82f37b5ca5883efd1a354 ]

Ping with Jumbo packet does not reply and get a watchdog timeout

[   46.059616] ------------[ cut here ]------------
[   46.064268] NETDEV WATCHDOG: eth0 (socfpga-dwmac): transmit queue 0 timed out
[   46.071471] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:461 dev_watchdog+0x2cc/0x2d8
[   46.079708] Modules linked in:
[   46.082761] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.18.0-00115-gc262be665854-dirty #264
[   46.091082] Hardware name: SoCFPGA Stratix 10 SoCDK (DT)
[   46.096377] pstate: 20000005 (nzCv daif -PAN -UAO)
[   46.101152] pc : dev_watchdog+0x2cc/0x2d8
[   46.105149] lr : dev_watchdog+0x2cc/0x2d8
[   46.109144] sp : ffff00000800bd80
[   46.112447] x29: ffff00000800bd80 x28: ffff80007a9b4940
[   46.117744] x27: 00000000ffffffff x26: ffff80007aa183b0
[   46.123040] x25: 0000000000000001 x24: 0000000000000140
[   46.128336] x23: ffff80007aa1839c x22: ffff80007aa17fb0
[   46.133632] x21: ffff80007aa18000 x20: ffff0000091a7000
[   46.138927] x19: 0000000000000000 x18: ffffffffffffffff
[   46.144223] x17: 0000000000000000 x16: 0000000000000000
[   46.149519] x15: ffff0000091a96c8 x14: 07740775076f0720
[   46.154814] x13: 07640765076d0769 x12: 0774072007300720
[   46.160110] x11: 0765077507650775 x10: 0771072007740769
[   46.165406] x9 : 076d0773076e0761 x8 : 077207740720073a
[   46.170702] x7 : 072907630761076d x6 : ffff80007ff9a0c0
[   46.175997] x5 : ffff80007ff9a0c0 x4 : 0000000000000002
[   46.181293] x3 : 0000000000000000 x2 : ffff0000091ac180
[   46.186589] x1 : e6a742ebe628e800 x0 : 0000000000000000
[   46.191885] Call trace:
[   46.194326]  dev_watchdog+0x2cc/0x2d8
[   46.197980]  call_timer_fn+0x20/0x78
[   46.201544]  expire_timers+0xa4/0xb0
[   46.205108]  run_timer_softirq+0xe4/0x198
[   46.209107]  __do_softirq+0x114/0x210
[   46.212760]  irq_exit+0xd0/0xd8
[   46.215895]  __handle_domain_irq+0x60/0xb0
[   46.219977]  gic_handle_irq+0x58/0xa8
[   46.223628]  el1_irq+0xb0/0x128
[   46.226761]  arch_cpu_idle+0x10/0x18
[   46.230326]  do_idle+0x1d4/0x288
[   46.233544]  cpu_startup_entry+0x24/0x28
[   46.237457]  secondary_start_kernel+0x17c/0x1c0
[   46.241971] ---[ end trace 57048cd1372cd828 ]---

Inspection of queue showed Jumbo packets were not sent out.
The ring Jumbo packet function needs to set the OWN bit so
the packet is sent.
Signed-off-by: NThor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>