Merge branch 'perf-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf_events: Make ABI definitions available to userspace
  perf tools: elf_sym__is_function() should accept "zero" sized functions
  tracing/syscalls: Use long for syscall ret format and field definitions
  perf trace: Update eval_flag() flags array to match interrupt.h
  perf trace: Remove unused code in builtin-trace.c
  perf: Propagate term signal to child

Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, timers: Check for pending timers after (device) interrupts
  NOHZ: update idle state also when NOHZ is inactive

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: ice1724: increase SPDIF and independent stereo buffer sizes
  ALSA: opl3: circular locking in the snd_opl3_note_on() and snd_opl3_note_off()
  ALSA: ICE1712/24 - Change the Multi Track Peak control (level meters) from MIXER to PCM type
  ALSA: hda - Fix yet another auto-mic bug in ALC268
  ASoC: WM8350 capture PGA mutes are inverted
  ASoC: Remove absent SYNC and TDM DAI format options from i.MX SSI
  sound: via82xx: move DXS volume controls to PCM interface
  ALSA: hda - Don't pick up invalid HP pins in alc_subsystem_id()
  ALSA: hda - Add a workaround for ASUS A7K
  ALSA: hda - Fix invalid initializations for ALC861 auto mode
  ASoC: wm8940: Fix check on error code form snd_soc_codec_set_cache_io
  ASoC: Fix SND_SOC_DAPM_LINE handling

* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (24 commits)
  drm/radeon/kms: fix vline register for second head.
  drm/r600: avoid assigning vb twice in blit code
  drm/radeon: use list_for_each_entry instead of list_for_each
  drm/radeon/kms: Fix AGP support for R600/RV770 family (v2)
  drm/radeon/kms: Fallback to non AGP when acceleration fails to initialize (v2)
  drm/radeon/kms: Fix RS600/RV515/R520/RS690 IRQ
  drm/radeon: Fix setting of bits
  drm/ttm: fix refcounting in ttm global code.
  drm/fb: add more correct 8/16/24/32 bpp fb support.
  drm/fb: add setcmap and fix 8-bit support.
  drm/radeon/kms: respect single crtc cards, only create one crtc. (v2)
  drm: Delete the DRM_DEBUG_KMS in drm_mode_cursor_ioctl
  drm/radeon/kms: add support for "Surround View"
  drm/radeon/kms: Fix irq handling on AVIVO hw
  drm/radeon/kms: R600/RV770 remove dead code and print message for wrong BIOS
  drm/radeon/kms: Fix R600/RV770 disable acceleration path
  drm/radeon/kms: Fix R600/RV770 startup path & reset
  drm/radeon/kms: Fix R600 write back buffer
  drm/radeon/kms: Remove old init path as no hw use it anymore
  drm/radeon/kms: Convert RS600 to new init path
  ...

Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  omapfb: Blizzard: constify register address tables
  omapfb: Blizzard: fix pointer to be const
  omapfb: Condition mutex acquisition
  omap: iovmm: Add missing mutex_unlock
  omap: iovmm: Fix incorrect spelling
  omap: SRAM: flush the right address after memcpy in omap_sram_push
  omap: Lock DPLL5 at boot
  omap: Fix incorrect 730 vs 850 detection
  OMAP3: PM: introduce a new powerdomain walk helper
  OMAP3: PM: Enable GPIO module-level wakeups
  OMAP3: PM: USBHOST: clear wakeup events on both hosts
  OMAP3: PM: PRCM interrupt: only handle selected PRCM interrupts
  OMAP3: PM: PRCM interrupt: check MPUGRPSEL register
  OMAP3: PM: Prevent hang in prcm_interrupt_handler

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  amd64_edac: beef up DRAM error injection
  amd64_edac: fix DRAM base and limit extraction
  amd64_edac: fix chip select handling
  amd64_edac: simple fix to allow reporting of CECC errors
  amd64_edac: fix K8 intlv_sel check
  amd64_edac: fix interleave enable tests
  amd64_edac: fix DRAM base and limit address extraction
  amd64_edac: fix driver instance lookup table allocation

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (40 commits)
  ethoc: limit the number of buffers to 128
  ethoc: use system memory as buffer
  ethoc: align received packet to make IP header at word boundary
  ethoc: fix buffer address mapping
  ethoc: fix typo to compute number of tx descriptors
  au1000_eth: Duplicate test of RX_OVERLEN bit in update_rx_stats()
  netxen: Fix Unlikely(x) > y
  pasemi_mac: ethtool get settings fix
  add maintainer for network drop monitor kernel service
  tg3: Fix phylib locking strategy
  rndis_host: support ETHTOOL_GPERMADDR
  ipv4: arp_notify address list bug
  gigaset: add kerneldoc comments
  gigaset: correct debugging output selection
  gigaset: improve error recovery
  gigaset: fix device ERROR response handling
  gigaset: announce if built with debugging
  gigaset: handle isoc frame errors more gracefully
  gigaset: linearize skb
  gigaset: fix reject/hangup handling
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6:
  Revert "Revert "ide: try to use PIO Mode 0 during probe if possible""
  sis5513: fix PIO setup for ATAPI devices

Now that range timers and deferred timers are common, I found a
problem with these using the "perf timechart" tool. Frans Pop also
reported high scheduler latencies via LatencyTop, when using
iwlagn.

It turns out that on x86, these two 'opportunistic' timers only get
checked when another "real" timer happens. These opportunistic
timers have the objective to save power by hitchhiking on other
wakeups, as to avoid CPU wakeups by themselves as much as possible.

The change in this patch runs this check not only at timer
interrupts, but at all (device) interrupts. The effect is that:

 1) the deferred timers/range timers get delayed less

 2) the range timers cause less wakeups by themselves because
    the percentage of hitchhiking on existing wakeup events goes up.

I've verified the working of the patch using "perf timechart", the
original exposed bug is gone with this patch. Frans also reported
success - the latencies are now down in the expected ~10 msec
range.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Tested-by: NFrans Pop <elendil@planet.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <20091008064041.67219b13@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6:
  agp: parisc-agp.c - use correct page_mask function
  parisc: Fix linker script breakage.
  parisc: convert to asm-generic/hardirq.h
  parisc: Make THREAD_SIZE available to assembly files and linker scripts.
  parisc: correct use of SHF_ALLOC
  parisc: rename parisc's vmalloc_start to parisc_vmalloc_start
  parisc: add me to Maintainers
  parisc: includecheck fix: signal.c
  parisc: HAVE_ARCH_TRACEHOOK
  parisc: add skeleton syscall.h
  parisc: stop using task->ptrace for {single,block}step flags
  parisc: split syscall_trace into two halves
  parisc: add missing TI_TASK macro in syscall.S
  parisc: tracehook_signal_handler
  parisc: tracehook_report_syscall

In module unload, lis3lv02d core driver sysfs clean up was not called.
Signed-off-by: NSamu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: NDaniel Mack <daniel@caiaq.de>
Cc: Éric Piel <eric.piel@tremplin-utc.net>
Cc: "Trisal, Kalhan" <kalhan.trisal@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The PC Card 8.0 specification (vol.  4, section 3.2.10) says the
TPLLV1_INFO field of the CISTPL_VERS_1 tuple must contain 4 strings.  Some
cards don't have all 4 so just parse as many as we can.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NDavid Vrabel <david.vrabel@csr.com>
Tested-by: NJonathan Cameron <jic23@cam.ac.uk>
Tested-by: NBing Zhao <bzhao@marvell.com>
Cc: Roel Kluin <roel.kluin@gmail.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

For hwpoison stress testing.  The debugfs mount point is assumed to be
/debug/.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Refactor the code to be more modular and easier to reuse.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This helps merge duplicate code (now and future) and outstand the main
logic.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It indicates to the system admin that processes mapping such pages may be
eating less physical memory than the reported numbers by legacy tools.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Izik Eidus <ieidus@redhat.com>
Acked-by: NChris Wright <chrisw@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This flag indicates a hardware detected memory corruption on the page.
Any future access of the page data may bring down the machine.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update documentation of cgroups tasks and procs files

Document the cgroup.procs file.

Clarify the semantics of the cgroup.procs and tasks files.  Although the
current cgroup.procs interface returns a sorted and uniqified list of
pids, potential future performance enhancements could result in those
properties being removed - explicitly document this aspect of the API.

There are no existing users of cgroup.procs, so compatibility isn't an
issue.  There are users of the "tasks" file, but none that would appear to
break in the event of the sorted property being broken.  The standard
"libcpuset" explicitly sorts the results of reading from the tasks file,
and "libcg" and other users don't appear to care about ordering.
Signed-off-by: NPaul Menage <menage@google.com>
Reviewed-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

fix the following 'make includecheck' warning:

  drivers/video/da8xx-fb.c: linux/device.h is included more than once.
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

fix the following 'make includecheck' warning:

  drivers/video/msm/mddi.c: linux/delay.h is included more than once.
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

fix the following 'make includecheck' warning:

  fs/proc/kcore.c: linux/mm.h is included more than once.
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

fix the following 'make includecheck' warning:

  mm/vmalloc.c: linux/highmem.h is included more than once.
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Adjust the max_kernel_pages default to a quarter of totalram_pages,
instead of nr_free_buffer_pages() / 4: the KSM pages themselves come from
highmem, and even on a 16GB PAE machine, 4GB of KSM pages would only be
pinning 32MB of lowmem with their rmap_items, so no need for the more
obscure calculation (nor for its own special init function).

There is no way for the user to switch KSM on if CONFIG_SYSFS is not
enabled, so in that case default run to KSM_RUN_MERGE.

Update KSM Documentation and Kconfig to reflect the new defaults.
Signed-off-by: NHugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Izik Eidus <ieidus@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Increase the default and maximum PCM buffer prellocation size for ice1724's
SPDIF and independent stereo pair outputs to 256K, which is the hardware's
maximum supported size. This allows a reduction in interrupt rate and
potentially power usage when an application is not latency-critical.
Signed-off-by: NRobert Hancock <hancockrwd@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix following circular locking in the opl3 driver.

=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.32-rc3 #87
-------------------------------------------------------
swapper/0 is trying to acquire lock:
 (&opl3->voice_lock){..-...}, at: [<cca748fe>] snd_opl3_note_off+0x1e/0xe0 [snd_opl3_synth]

but task is already holding lock:
 (&opl3->sys_timer_lock){..-...}, at: [<cca75169>] snd_opl3_timer_func+0x19/0xc0 [snd_opl3_synth]

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (&opl3->sys_timer_lock){..-...}:
       [<c02461d5>] validate_chain+0xa25/0x1040
       [<c0246aca>] __lock_acquire+0x2da/0xab0
       [<c024731a>] lock_acquire+0x7a/0xa0
       [<c044c300>] _spin_lock_irqsave+0x40/0x60
       [<cca75046>] snd_opl3_note_on+0x686/0x790 [snd_opl3_synth]
       [<cca68912>] snd_midi_process_event+0x322/0x590 [snd_seq_midi_emul]
       [<cca74245>] snd_opl3_synth_event_input+0x15/0x20 [snd_opl3_synth]
       [<cca4dcc0>] snd_seq_deliver_single_event+0x100/0x200 [snd_seq]
       [<cca4de07>] snd_seq_deliver_event+0x47/0x1f0 [snd_seq]
       [<cca4e50b>] snd_seq_dispatch_event+0x3b/0x140 [snd_seq]
       [<cca5008c>] snd_seq_check_queue+0x10c/0x120 [snd_seq]
       [<cca5037b>] snd_seq_enqueue_event+0x6b/0xe0 [snd_seq]
       [<cca4e0fd>] snd_seq_client_enqueue_event+0xdd/0x100 [snd_seq]
       [<cca4eb7a>] snd_seq_write+0xea/0x190 [snd_seq]
       [<c02827b6>] vfs_write+0x96/0x160
       [<c0282c9d>] sys_write+0x3d/0x70
       [<c0202c45>] syscall_call+0x7/0xb

-> #0 (&opl3->voice_lock){..-...}:
       [<c02467e6>] validate_chain+0x1036/0x1040
       [<c0246aca>] __lock_acquire+0x2da/0xab0
       [<c024731a>] lock_acquire+0x7a/0xa0
       [<c044c300>] _spin_lock_irqsave+0x40/0x60
       [<cca748fe>] snd_opl3_note_off+0x1e/0xe0 [snd_opl3_synth]
       [<cca751f0>] snd_opl3_timer_func+0xa0/0xc0 [snd_opl3_synth]
       [<c022ac46>] run_timer_softirq+0x166/0x1e0
       [<c02269e8>] __do_softirq+0x78/0x110
       [<c0226ac6>] do_softirq+0x46/0x50
       [<c0226e26>] irq_exit+0x36/0x40
       [<c0204bd2>] do_IRQ+0x42/0xb0
       [<c020328e>] common_interrupt+0x2e/0x40
       [<c021092f>] apm_cpu_idle+0x10f/0x290
       [<c0201b11>] cpu_idle+0x21/0x40
       [<c04443cd>] rest_init+0x4d/0x60
       [<c055c835>] start_kernel+0x235/0x280
       [<c055c066>] i386_start_kernel+0x66/0x70

other info that might help us debug this:

2 locks held by swapper/0:
 #0:  (&opl3->tlist){+.-...}, at: [<c022abd0>] run_timer_softirq+0xf0/0x1e0
 #1:  (&opl3->sys_timer_lock){..-...}, at: [<cca75169>] snd_opl3_timer_func+0x19/0xc0 [snd_opl3_synth]

stack backtrace:
Pid: 0, comm: swapper Not tainted 2.6.32-rc3 #87
Call Trace:
 [<c0245188>] print_circular_bug+0xc8/0xd0
 [<c02467e6>] validate_chain+0x1036/0x1040
 [<c0247f14>] ? check_usage_forwards+0x54/0xd0
 [<c0246aca>] __lock_acquire+0x2da/0xab0
 [<c024731a>] lock_acquire+0x7a/0xa0
 [<cca748fe>] ? snd_opl3_note_off+0x1e/0xe0 [snd_opl3_synth]
 [<c044c300>] _spin_lock_irqsave+0x40/0x60
 [<cca748fe>] ? snd_opl3_note_off+0x1e/0xe0 [snd_opl3_synth]
 [<cca748fe>] snd_opl3_note_off+0x1e/0xe0 [snd_opl3_synth]
 [<c044c307>] ? _spin_lock_irqsave+0x47/0x60
 [<cca751f0>] snd_opl3_timer_func+0xa0/0xc0 [snd_opl3_synth]
 [<c022ac46>] run_timer_softirq+0x166/0x1e0
 [<c022abd0>] ? run_timer_softirq+0xf0/0x1e0
 [<cca75150>] ? snd_opl3_timer_func+0x0/0xc0 [snd_opl3_synth]
 [<c02269e8>] __do_softirq+0x78/0x110
 [<c044c0fd>] ? _spin_unlock+0x1d/0x20
 [<c025915f>] ? handle_level_irq+0xaf/0xe0
 [<c0226ac6>] do_softirq+0x46/0x50
 [<c0226e26>] irq_exit+0x36/0x40
 [<c0204bd2>] do_IRQ+0x42/0xb0
 [<c024463c>] ? trace_hardirqs_on_caller+0x12c/0x180
 [<c020328e>] common_interrupt+0x2e/0x40
 [<c0208d88>] ? default_idle+0x38/0x50
 [<c021092f>] apm_cpu_idle+0x10f/0x290
 [<c0201b11>] cpu_idle+0x21/0x40
 [<c04443cd>] rest_init+0x4d/0x60
 [<c055c835>] start_kernel+0x235/0x280
 [<c055c210>] ? unknown_bootoption+0x0/0x210
 [<c055c066>] i386_start_kernel+0x66/0x70
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

* PLEASE NOTE - this change requires the corresponding update of
  envy24control for ice1712 - kind of an ABI change.
* The "Multi Track Peak" control is read-only level meters indicator.
* The control is VERY confusing to most users since it is currently displayed
  in regular mixers. E.g. alsamixer ignores its read-only status
  and allows changing the levels with keys which makes no sense.
Signed-off-by: NPavel Hofman <pavel.hofman@ivitera.com>
Acked-by: NJaroslav Kysela <perex@perex.cz>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

conflict in radeon since new init path merged with vga arb code.

Conflicts:
	drivers/gpu/drm/radeon/radeon.h
	drivers/gpu/drm/radeon/radeon_asic.h
	drivers/gpu/drm/radeon/radeon_device.c

Both r100/r600 had this wrong, use the macro to extract the register
to relocate.
Signed-off-by: NDave Airlie <airlied@redhat.com>

There is no need to assign vb before you know that space is available.

[agd5f: adapted for kernel tree.]
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This is just a cleanup of the list macro usage.
Signed-off-by: NDave Airlie <airlied@redhat.com>

For AGP to work unmapped access must cover VRAM & AGP as
AGP is treated like VRAM by the GPU (ie physical address).
This patch properly setup the virtual memory system aperture
to cover AGP if AGP is enabled. It seems that there is memory
corruption after resume when using AGP (RV770 seems unaffected
thought). Version 2 just fix merge issue with updated AGP
fallback patch.
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

When GPU acceleration is not working with AGP try to fallback to non
AGP GART (either PCI or PCIE GART). This should make KMS failure on
AGP less painfull. We still need to find out what is wrong when AGP
fails but at least user have a lot of more chances to get a working
configuration with acceleration. This patch also cleanup R600/RV770
fallback path so they use same code as others asics. Version 2
factorize agp disabling logic to avoid code duplication and bugs.
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Bad generated header file leaded to use wrong register
to check IRQ status and acknowledge them. Fix the header
and use proper registers.
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

When injecting DRAM ECC errors (F3xBC_x8), EccVector[15:0] is a bitmask
of which bits should be error injected when written to and holds the
payload of 16-bit DRAM word when read, respectively.

Add /sysfs members to show the DRAM ECC section/word/vector.

Fail wrong injection values entered over /sysfs instead of truncating
them.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

On Fam10h and above, F1x[1, 0][7C:40] are DRAM Base/Limit registers
which specify the destination node of a DRAM address. Those address
boundaries are being extracted into ->dram_base[] and ->dram_limit[].
Correct the extraction masks to match the respective address bits.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>