commit c85be041065c0be8bc48eda4c45e0319caf1d0e5 upstream.

In case dmaengine_prep_dma_cyclic fails, the fix returns a proper
error code to avoid NULL pointer dereference.
Signed-off-by: NKangjie Lu <kjlu@umn.edu>
Fixes: 34df42f5 ("serial: at91: add rx dma support")
Acked-by: NRichard Genoud <richard.genoud@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6734330654dac550f12e932996b868c6d0dcb421 upstream.

In case ioremap fails, the fix returns -ENOMEM to avoid NULL
pointer dereferences.
Multiple places use port.membase.
Signed-off-by: NKangjie Lu <kjlu@umn.edu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e9abc611a941d4051cde1d94b2ab7473fdb50102 upstream.

NV12 framebuffers produced by the VPU shows distorted on RK3288
after win has been disabled when scaling is active.

This issue can be reproduced using a 1080p modeset by:
- Scale a 1280x720 NV12 framebuffer to 1920x1080 on win0
- Disable win0
- Display a 1920x1080 NV12 framebuffer without scaling on win0
- Output will now show the framebuffer distorted

And by:
- Scale a 1280x720 NV12 framebuffer to 1920x1080
- Change to a 720p modeset (win gets disabled and scaling reset to none)
- Output will now show the framebuffer distorted

Fix this by setting scale mode to none when win is disabled.

Fixes: 4c156c21 ("drm/rockchip: vop: support plane scale")
Cc: stable@vger.kernel.org
Signed-off-by: NJonas Karlman <jonas@kwiboo.se>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/AM3PR03MB0966DE3E19BACE07328CD637AC7D0@AM3PR03MB0966.eurprd03.prod.outlook.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 242ec1455151267fe35a0834aa9038e4c4670884 upstream.

Suppose more than one non-NPIV FCP device is active on the same channel.
Send I/O to storage and have some of the pending I/O run into a SCSI
command timeout, e.g. due to bit errors on the fibre. Now the error
situation stops. However, we saw FCP requests continue to timeout in the
channel. The abort will be successful, but the subsequent TUR fails.
Scsi_eh starts. The LUN reset fails. The target reset fails.  The host
reset only did an FCP device recovery. However, for non-NPIV FCP devices,
this does not close and reopen ports on the SAN-side if other non-NPIV FCP
device(s) share the same open ports.

In order to resolve the continuing FCP request timeouts, we need to
explicitly close and reopen ports on the SAN-side.

This was missing since the beginning of zfcp in v2.6.0 history commit
ea127f975424 ("[PATCH] s390 (7/7): zfcp host adapter.").

Note: The FSF requests for forced port reopen could run into FSF request
timeouts due to other reasons. This would trigger an internal FCP device
recovery. Pending forced port reopen recoveries would get dismissed. So
some ports might not get fully reopened during this host reset handler.
However, subsequent I/O would trigger the above described escalation and
eventually all ports would be forced reopen to resolve any continuing FCP
request timeouts due to earlier bit errors.
Signed-off-by: NSteffen Maier <maier@linux.ibm.com>
Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Cc: <stable@vger.kernel.org> #3.0+
Reviewed-by: NJens Remus <jremus@linux.ibm.com>
Reviewed-by: NBenjamin Block <bblock@linux.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit fe67888fc007a76b81e37da23ce5bd8fb95890b0 upstream.

An already deleted SCSI device can exist on the Scsi_Host and remain there
because something still holds a reference.  A new SCSI device with the same
H:C:T:L and FCP device, target port WWPN, and FCP LUN can be created.  When
we try to unblock an rport, we still find the deleted SCSI device and
return early because the zfcp_scsi_dev of that SCSI device is not
ZFCP_STATUS_COMMON_UNBLOCKED. Hence we miss to unblock the rport, even if
the new proper SCSI device would be in good state.

Therefore, skip deleted SCSI devices when iterating the sdevs of the shost.
[cf. __scsi_device_lookup{_by_target}() or scsi_device_get()]

The following abbreviated trace sequence can indicate such problem:

Area           : REC
Tag            : ersfs_3
LUN            : 0x4045400300000000
WWPN           : 0x50050763031bd327
LUN status     : 0x40000000     not ZFCP_STATUS_COMMON_UNBLOCKED
Ready count    : n		not incremented yet
Running count  : 0x00000000
ERP want       : 0x01
ERP need       : 0xc1		ZFCP_ERP_ACTION_NONE

Area           : REC
Tag            : ersfs_3
LUN            : 0x4045400300000000
WWPN           : 0x50050763031bd327
LUN status     : 0x41000000
Ready count    : n+1
Running count  : 0x00000000
ERP want       : 0x01
ERP need       : 0x01

...

Area           : REC
Level          : 4		only with increased trace level
Tag            : ertru_l
LUN            : 0x4045400300000000
WWPN           : 0x50050763031bd327
LUN status     : 0x40000000
Request ID     : 0x0000000000000000
ERP status     : 0x01800000
ERP step       : 0x1000
ERP action     : 0x01
ERP count      : 0x00

NOT followed by a trace record with tag "scpaddy"
for WWPN 0x50050763031bd327.
Signed-off-by: NSteffen Maier <maier@linux.ibm.com>
Fixes: 6f2ce1c6 ("scsi: zfcp: fix rport unblock race with LUN recovery")
Cc: <stable@vger.kernel.org> #2.6.32+
Reviewed-by: NJens Remus <jremus@linux.ibm.com>
Reviewed-by: NBenjamin Block <bblock@linux.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1d5de5bd311be7cd54f02f7cd164f0349a75c876 upstream.

Commit a83da8a4509d ("scsi: sd: Optimal I/O size should be a multiple
of physical block size") split one conditional into several separate
statements in an effort to provide more accurate warning messages when
a device reports a nonsensical value. However, this reorganization
accidentally dropped the precondition of the reported value being
larger than zero. This lead to a warning getting emitted on devices
that do not report an optimal I/O size at all.

Remain silent if a device does not report an optimal I/O size.

Fixes: a83da8a4509d ("scsi: sd: Optimal I/O size should be a multiple of physical block size")
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: <stable@vger.kernel.org>
Reported-by: NHussam Al-Tayeb <ht990332@gmx.com>
Tested-by: NHussam Al-Tayeb <ht990332@gmx.com>
Reviewed-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c14a57264399efd39514a2329c591a4b954246d8 upstream.

The scsi_end_request() function calls scsi_cmd_to_driver() indirectly and
hence needs the disk->private_data pointer. Avoid that that pointer is
cleared before all affected I/O requests have finished. This patch avoids
that the following crash occurs:

Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Call trace:
 scsi_mq_uninit_cmd+0x1c/0x30
 scsi_end_request+0x7c/0x1b8
 scsi_io_completion+0x464/0x668
 scsi_finish_command+0xbc/0x160
 scsi_eh_flush_done_q+0x10c/0x170
 sas_scsi_recover_host+0x84c/0xa98 [libsas]
 scsi_error_handler+0x140/0x5b0
 kthread+0x100/0x12c
 ret_from_fork+0x10/0x18

Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Jason Yan <yanaijie@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Reported-by: NJason Yan <yanaijie@huawei.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e6a9467ea14bae8691b0f72c500510c42ea8edb8 upstream.

ocfs2_reflink_inodes_lock() can swap the inode1/inode2 variables so that
we always grab cluster locks in order of increasing inode number.

Unfortunately, we forget to swap the inode record buffer head pointers
when we've done this, which leads to incorrect bookkeepping when we're
trying to make the two inodes have the same refcount tree.

This has the effect of causing filesystem shutdowns if you're trying to
reflink data from inode 100 into inode 97, where inode 100 already has a
refcount tree attached and inode 97 doesn't.  The reflink code decides
to copy the refcount tree pointer from 100 to 97, but uses inode 97's
inode record to open the tree root (which it doesn't have) and blows up.
This issue causes filesystem shutdowns and metadata corruption!

Link: http://lkml.kernel.org/r/20190312214910.GK20533@magnolia
Fixes: 29ac8e85 ("ocfs2: implement the VFS clone_range, copy_range, and dedupe_range features")
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NJoseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 73601ea5b7b18eb234219ae2adf77530f389da79 upstream.

syzbot is hitting lockdep warning [1] due to trying to open a fifo
during an execve() operation.  But we don't need to open non regular
files during an execve() operation, for all files which we will need are
the executable file itself and the interpreter programs like /bin/sh and
ld-linux.so.2 .

Since the manpage for execve(2) says that execve() returns EACCES when
the file or a script interpreter is not a regular file, and the manpage
for uselib(2) says that uselib() can return EACCES, and we use
FMODE_EXEC when opening for execve()/uselib(), we can bail out if a non
regular file is requested with FMODE_EXEC set.

Since this deadlock followed by khungtaskd warnings is trivially
reproducible by a local unprivileged user, and syzbot's frequent crash
due to this deadlock defers finding other bugs, let's workaround this
deadlock until we get a chance to find a better solution.

[1] https://syzkaller.appspot.com/bug?id=b5095bfec44ec84213bac54742a82483aad578ce

Link: http://lkml.kernel.org/r/1552044017-7890-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jpReported-by: Nsyzbot <syzbot+e93a80c1bb7c5c56e522461c149f8bf55eab1b2b@syzkaller.appspotmail.com>
Fixes: 8924feff ("splice: lift pipe_lock out of splice_to_pipe()")
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: NKees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>	[4.9+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 54a7151b1496cddbb7a83546b7998103e98edc88 upstream.

Fix commit 56067812 ("kbuild: modversions: add infrastructure for
emitting relative CRCs") where CRCs are interpreted in host byte order
rather than proper kernel byte order. The bug is conditional on
CONFIG_MODULE_REL_CRCS.

For example, when loading a BE module into a BE kernel compiled with a LE
system, the error "disagrees about version of symbol module_layout" is
produced. A message such as "Found checksum D7FA6856 vs module 5668FAD7"
will be given with debug enabled, which indicates an obvious endian
problem within __kcrctab within the kernel image.

The general solution is to use the macro TO_NATIVE, as is done in
similar cases throughout modpost.c. With this correction it has been
verified that a BE kernel compiled with a LE system accepts BE modules.

This change has also been verified with a LE kernel compiled with a LE
system, in which case TO_NATIVE returns its value unmodified since the
byte orders match. This is by far the common case.

Fixes: 56067812 ("kbuild: modversions: add infrastructure for emitting relative CRCs")
Signed-off-by: NFredrik Noring <noring@nocrew.org>
Cc: stable@vger.kernel.org
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e2a829b3da01b9b32c4d0291d042b8a6e2a98ca3 upstream.

On an Acer Predator Helios 500 (Ryzen version), the laptop's speakers
don't work out of the box.

The problem can be worked around with hdajackretask, remapping the
"Black Headphone, Right side" pin (0x21) to the Internal speaker.

This patch adds a quirk to change this mapping by default.

[ corrected ALC299_FIXUP_PREDATOR_SPK definition and adapted for the
  latest tree by tiwai ]
Signed-off-by: NBernhard Rosenkraenzer <bero@lindev.ch>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6ac371aa1a74240fb910c98aa3484d5ece8473d3 upstream.

The ASUS X430UN and X512DK with ALC256 cannot detect the headset MIC
until ALC256_FIXUP_ASUS_MIC_NO_PRESENCE quirk applied.
Signed-off-by: NJian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: NDaniel Drake <drake@endlessm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a806ef1cf3bbc0baadc6cdeb11f12b5dd27e91c2 upstream.

The ASUS laptop P5440FF with ALC256 can't detect the headset microphone
until ALC256_FIXUP_ASUS_MIC_NO_PRESENCE quirk applied.
Signed-off-by: NChris Chiu <chiu@endlessm.com>
Signed-off-by: NDaniel Drake <drake@endlessm.com>
Signed-off-by: NJian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e1037354a0a75acdea2b27043c0a371ed85cf262 upstream.

The ASUS laptop X441MB and X705FD with ALC256 cannot detect the headset
MIC until ALC256_FIXUP_ASUS_MIC_NO_PRESENCE quirk applied.
Signed-off-by: NChris Chiu <chiu@endlessm.com>
Signed-off-by: NDaniel Drake <drake@endlessm.com>
Signed-off-by: NJian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c7531e31c8a440b5fe6bd62664def5bcb6262f96 upstream.

The Acer laptop Aspire E5-523G and ES1-432 with ALC255 can't detect
the headset microphone until ALC255_FIXUP_ACER_MIC_NO_PRESENCE quirk
applied.
Signed-off-by: NChris Chiu <chiu@endlessm.com>
Signed-off-by: NDaniel Drake <drake@endlessm.com>
Signed-off-by: NJian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2733ccebf4a937a0858e7d05a4a003b89715033f upstream.

The Acer Aspire Z24-890 cannot detect the headset MIC until
ALC286_FIXUP_ACER_AIO_HEADSET_MIC quirk applied.
Signed-off-by: NJian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: NDaniel Drake <drake@endlessm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 667a8f73753908c4d0171e52b71774f9be5d6713 upstream.

Some Acer AIO desktops like Veriton Z6860G, Z4860G and Z4660G cannot
record sound from headset MIC.  This patch adds the
ALC286_FIXUP_ACER_AIO_HEADSET_MIC quirk to fix this issue.

Fixes: 9f8aefed9623 ("ALSA: hda/realtek: Fix mic issue on Acer AIO Veriton Z4660G")
Fixes: b72f936f6b32 ("ALSA: hda/realtek: Fix mic issue on Acer AIO Veriton Z4860G/Z6860G")
Signed-off-by: NJian-Hong Pan <jian-hong@endlessm.com>
Reviewed-by: NKailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit da484d00f020af3dd7cfcc6c4b69a7f856832883 upstream.

Enable headset mode support for new WYSE NB platform.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 136824efaab2c095fc911048f7c7ddeda258c965 upstream.

This patch will enable WYSE AIO for Headset mode.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 113ce08109f8e3b091399e7cc32486df1cff48e7 upstream.

Currently PCM core sets each opened stream forcibly to SUSPENDED state
via snd_pcm_suspend_all() call, and the user-space is responsible for
re-triggering the resume manually either via snd_pcm_resume() or
prepare call.  The scheme works fine usually, but there are corner
cases where the stream can't be resumed by that call: the streams
still in OPEN state before finishing hw_params.  When they are
suspended, user-space cannot perform resume or prepare because they
haven't been set up yet.  The only possible recovery is to re-open the
device, which isn't nice at all.  Similarly, when a stream is in
DISCONNECTED state, it makes no sense to change it to SUSPENDED
state.  Ditto for in SETUP state; which you can re-prepare directly.

So, this patch addresses these issues by filtering the PCM streams to
be suspended by checking the PCM state.  When a stream is in either
OPEN, SETUP or DISCONNECTED as well as already SUSPENDED, the suspend
action is skipped.

To be noted, this problem was originally reported for the PCM runtime
PM on HD-audio.  And, the runtime PM problem itself was already
addressed (although not intended) by the code refactoring commits
3d21ef0b49f8 ("ALSA: pcm: Suspend streams globally via device type PM
ops") and 17bc4815de58 ("ALSA: pci: Remove superfluous
snd_pcm_suspend*() calls").  These commits eliminated the
snd_pcm_suspend*() calls from the runtime PM suspend callback code
path, hence the racy OPEN state won't appear while runtime PM.
(FWIW, the race window is between snd_pcm_open_substream() and the
first power up in azx_pcm_open().)

Although the runtime PM issue was already "fixed", the same problem is
still present for the system PM, hence this patch is still needed.
And for stable trees, this patch alone should suffice for fixing the
runtime PM problem, too.
Reported-and-tested-by: NJon Hunter <jonathanh@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ca0214ee2802dd47239a4e39fb21c5b00ef61b22 upstream.

The PCM OSS emulation converts and transfers the data on the fly via
"plugins".  The data is converted over the dynamically allocated
buffer for each plugin, and recently syzkaller caught OOB in this
flow.

Although the bisection by syzbot pointed out to the commit
65766ee0bf7f ("ALSA: oss: Use kvzalloc() for local buffer
allocations"), this is merely a commit to replace vmalloc() with
kvmalloc(), hence it can't be the cause.  The further debug action
revealed that this happens in the case where a slave PCM doesn't
support only the stereo channels while the OSS stream is set up for a
mono channel.  Below is a brief explanation:

At each OSS parameter change, the driver sets up the PCM hw_params
again in snd_pcm_oss_change_params_lock().  This is also the place
where plugins are created and local buffers are allocated.  The
problem is that the plugins are created before the final hw_params is
determined.  Namely, two snd_pcm_hw_param_near() calls for setting the
period size and periods may influence on the final result of channels,
rates, etc, too, while the current code has already created plugins
beforehand with the premature values.  So, the plugin believes that
channels=1, while the actual I/O is with channels=2, which makes the
driver reading/writing over the allocated buffer size.

The fix is simply to move the plugin allocation code after the final
hw_params call.

Reported-by: syzbot+d4503ae45b65c5bc1194@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c709f14f0616482b67f9fbcb965e1493a03ff30b upstream.

dev is indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

sound/core/seq/oss/seq_oss_synth.c:626 snd_seq_oss_synth_make_info() warn: potential spectre issue 'dp->synths' [w] (local cap)

Fix this by sanitizing dev before using it to index dp->synths.

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://lore.kernel.org/lkml/20180423164740.GY17484@dhcp22.suse.cz/

Cc: stable@vger.kernel.org
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2b1d9c8f87235f593826b9cf46ec10247741fff9 upstream.

info->stream is indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

sound/core/rawmidi.c:604 __snd_rawmidi_info_select() warn: potential spectre issue 'rmidi->streams' [r] (local cap)

Fix this by sanitizing info->stream before using it to index
rmidi->streams.

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://lore.kernel.org/lkml/20180423164740.GY17484@dhcp22.suse.cz/

Cc: stable@vger.kernel.org
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1eec7151ae0e134bd42e3f128066b2ff8da21393 upstream.

This belated patch implements Andrew Lunn's request of
"remove the phy_read() and phy_write() functions."
<https://lore.kernel.org/patchwork/comment/902734/>

While seemingly harmless, this causes the switch's user
port PHYs to get registered twice. This is because the
DSA subsystem will create a slave mdio-bus not knowing
that the qca8k_phy_(read|write) accessors operate on
the external mdio-bus. So the same "bus" gets effectively
duplicated.

Cc: stable@vger.kernel.org
Fixes: 6b93fb46 ("net-next: dsa: add new driver for qca8xxx family")
Signed-off-by: NChristian Lamparter <chunkeey@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0cb98abb5bd13b9a636bde603d952d722688b428 upstream.

Allow the async rpc task for finish and update the open state if needed,
then free the slot. Otherwise, the async rpc unable to decode the reply.
Signed-off-by: NOlga Kornievskaia <kolga@netapp.com>
Fixes: ae55e59d ("pnfs: Don't release the sequence slot...")
Cc: stable@vger.kernel.org # v4.18+
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4a9be28c45bf02fa0436808bb6c0baeba30e120e upstream.

If the last NFSv3 unmount from a given host races with a mount from the
same host, we can destroy an nlm_host that is still in use.

Specifically nlmclnt_lookup_host() can increment h_count on
an nlm_host that nlmclnt_release_host() has just successfully called
refcount_dec_and_test() on.
Once nlmclnt_lookup_host() drops the mutex, nlm_destroy_host_lock()
will be called to destroy the nlmclnt which is now in use again.

The cause of the problem is that the dec_and_test happens outside the
locked region.  This is easily fixed by using
refcount_dec_and_mutex_lock().

Fixes: 8ea6ecc8 ("lockd: Create client-side nlm_host cache")
Cc: stable@vger.kernel.org (v2.6.38+)
Signed-off-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 50b7f1b7236bab08ebbbecf90521e84b068d7a17 upstream.

When we get an interrupt for a channel program, it is not
necessarily the final interrupt; for example, the issuing
guest may request an intermediate interrupt by specifying
the program-controlled-interrupt flag on a ccw.

We must not switch the state to idle if the interrupt is not
yet final; even more importantly, we must not free the translated
channel program if the interrupt is not yet final, or the host
can crash during cp rewind.

Fixes: e5f84dba ("vfio: ccw: return I/O results asynchronously")
Cc: stable@vger.kernel.org # v4.12+
Reviewed-by: NEric Farman <farman@linux.ibm.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 86be36f6502c52ddb4b85938145324fd07332da1 upstream.

Yauheni Kaliuta pointed out that PTR_TO_STACK store/load verifier test
was failing on powerpc64 BE, and rightfully indicated that the PPC_LD()
macro is not masking away the last two bits of the offset per the ISA,
resulting in the generation of 'lwa' instruction instead of the intended
'ld' instruction.

Segher also pointed out that we can't simply mask away the last two bits
as that will result in loading/storing from/to a memory location that
was not intended.

This patch addresses this by using ldx/stdx if the offset is not
word-aligned. We load the offset into a temporary register (TMP_REG_2)
and use that as the index register in a subsequent ldx/stdx. We fix
PPC_LD() macro to mask off the last two bits, but enhance PPC_BPF_LL()
and PPC_BPF_STL() to factor in the offset value and generate the proper
instruction sequence. We also convert all existing users of PPC_LD() and
PPC_STD() to use these macros. All existing uses of these macros have
been audited to ensure that TMP_REG_2 can be clobbered.

Fixes: 156d0e29 ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF")
Cc: stable@vger.kernel.org # v4.9+
Reported-by: NYauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 91740fc8242b4f260cfa4d4536d8551804777fae upstream.

In the current cpuidle implementation for i.MX6q, the CPU that sets
'WAIT_UNCLOCKED' and the CPU that returns to 'WAIT_CLOCKED' are always
the same. While the CPU that sets 'WAIT_UNCLOCKED' is in IDLE state of
"WAIT", if the other CPU wakes up and enters IDLE state of "WFI"
istead of "WAIT", this CPU can not wake up at expired time.
 Because, in the case of "WFI", the CPU must be waked up by the local
timer interrupt. But, while 'WAIT_UNCLOCKED' is set, the local timer
is stopped, when all CPUs execute "wfi" instruction. As a result, the
local timer interrupt is not fired.
 In this situation, this CPU will wake up by IRQ different from local
timer. (e.g. broacast timer)

So, this fix changes CPU to return to 'WAIT_CLOCKED'.
Signed-off-by: NKohji Okuno <okuno.kohji@jp.panasonic.com>
Fixes: e5f9dec8 ("ARM: imx6q: support WAIT mode using cpuidle")
Cc: <stable@vger.kernel.org>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0ccc3876e4b2a1559a4dbe3126dda4459d38a83b upstream.

Back in commit a89ca6f2 ("Btrfs: fix fsync after truncate when
no_holes feature is enabled") I added an assertion that is triggered when
an inline extent is found to assert that the length of the (uncompressed)
data the extent represents is the same as the i_size of the inode, since
that is true most of the time I couldn't find or didn't remembered about
any exception at that time. Later on the assertion was expanded twice to
deal with a case of a compressed inline extent representing a range that
matches the sector size followed by an expanding truncate, and another
case where fallocate can update the i_size of the inode without adding
or updating existing extents (if the fallocate range falls entirely within
the first block of the file). These two expansion/fixes of the assertion
were done by commit 7ed586d0a8241 ("Btrfs: fix assertion on fsync of
regular file when using no-holes feature") and commit 6399fb5a
("Btrfs: fix assertion failure during fsync in no-holes mode").
These however missed the case where an falloc expands the i_size of an
inode to exactly the sector size and inline extent exists, for example:

 $ mkfs.btrfs -f -O no-holes /dev/sdc
 $ mount /dev/sdc /mnt

 $ xfs_io -f -c "pwrite -S 0xab 0 1096" /mnt/foobar
 wrote 1096/1096 bytes at offset 0
 1 KiB, 1 ops; 0.0002 sec (4.448 MiB/sec and 4255.3191 ops/sec)

 $ xfs_io -c "falloc 1096 3000" /mnt/foobar
 $ xfs_io -c "fsync" /mnt/foobar
 Segmentation fault

 $ dmesg
 [701253.602385] assertion failed: len == i_size || (len == fs_info->sectorsize && btrfs_file_extent_compression(leaf, extent) != BTRFS_COMPRESS_NONE) || (len < i_size && i_size < fs_info->sectorsize), file: fs/btrfs/tree-log.c, line: 4727
 [701253.602962] ------------[ cut here ]------------
 [701253.603224] kernel BUG at fs/btrfs/ctree.h:3533!
 [701253.603503] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
 [701253.603774] CPU: 2 PID: 7192 Comm: xfs_io Tainted: G        W         5.0.0-rc8-btrfs-next-45 #1
 [701253.604054] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014
 [701253.604650] RIP: 0010:assfail.constprop.23+0x18/0x1a [btrfs]
 (...)
 [701253.605591] RSP: 0018:ffffbb48c186bc48 EFLAGS: 00010286
 [701253.605914] RAX: 00000000000000de RBX: ffff921d0a7afc08 RCX: 0000000000000000
 [701253.606244] RDX: 0000000000000000 RSI: ffff921d36b16868 RDI: ffff921d36b16868
 [701253.606580] RBP: ffffbb48c186bcf0 R08: 0000000000000000 R09: 0000000000000000
 [701253.606913] R10: 0000000000000003 R11: 0000000000000000 R12: ffff921d05d2de18
 [701253.607247] R13: ffff921d03b54000 R14: 0000000000000448 R15: ffff921d059ecf80
 [701253.607769] FS:  00007f14da906700(0000) GS:ffff921d36b00000(0000) knlGS:0000000000000000
 [701253.608163] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 [701253.608516] CR2: 000056087ea9f278 CR3: 00000002268e8001 CR4: 00000000003606e0
 [701253.608880] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 [701253.609250] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 [701253.609608] Call Trace:
 [701253.609994]  btrfs_log_inode+0xdfb/0xe40 [btrfs]
 [701253.610383]  btrfs_log_inode_parent+0x2be/0xa60 [btrfs]
 [701253.610770]  ? do_raw_spin_unlock+0x49/0xc0
 [701253.611150]  btrfs_log_dentry_safe+0x4a/0x70 [btrfs]
 [701253.611537]  btrfs_sync_file+0x3b2/0x440 [btrfs]
 [701253.612010]  ? do_sysinfo+0xb0/0xf0
 [701253.612552]  do_fsync+0x38/0x60
 [701253.612988]  __x64_sys_fsync+0x10/0x20
 [701253.613360]  do_syscall_64+0x60/0x1b0
 [701253.613733]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
 [701253.614103] RIP: 0033:0x7f14da4e66d0
 (...)
 [701253.615250] RSP: 002b:00007fffa670fdb8 EFLAGS: 00000246 ORIG_RAX: 000000000000004a
 [701253.615647] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f14da4e66d0
 [701253.616047] RDX: 000056087ea9c260 RSI: 000056087ea9c260 RDI: 0000000000000003
 [701253.616450] RBP: 0000000000000001 R08: 0000000000000020 R09: 0000000000000010
 [701253.616854] R10: 000000000000009b R11: 0000000000000246 R12: 000056087ea9c260
 [701253.617257] R13: 000056087ea9c240 R14: 0000000000000000 R15: 000056087ea9dd10
 (...)
 [701253.619941] ---[ end trace e088d74f132b6da5 ]---

Updating the assertion again to allow for this particular case would result
in a meaningless assertion, plus there is currently no risk of logging
content that would result in any corruption after a log replay if the size
of the data encoded in an inline extent is greater than the inode's i_size
(which is not currently possibe either with or without compression),
therefore just remove the assertion.

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 139a56170de67101791d6e6c8e940c6328393fe9 upstream.

qgroup_rsv_size is calculated as the product of
outstanding_extent * fs_info->nodesize. The product is calculated with
32 bit precision since both variables are defined as u32. Yet
qgroup_rsv_size expects a 64 bit result.

Avoid possible multiplication overflow by casting outstanding_extent to
u64. Such overflow would in the worst case (64K nodesize) require more
than 65536 extents, which is quite large and i'ts not likely that it
would happen in practice.

Fixes-coverity-id: 1435101
Fixes: ff6bc37e ("btrfs: qgroup: Use independent and accurate per inode qgroup rsv")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3897b6f0a859288c22fb793fad11ec2327e60fcd upstream.

Parity page is incorrectly unmapped in finish_parity_scrub(), triggering
a reference counter bug on i386, i.e.:

 [ 157.662401] kernel BUG at mm/highmem.c:349!
 [ 157.666725] invalid opcode: 0000 [#1] SMP PTI

The reason is that kunmap(p_page) was completely left out, so we never
did an unmap for the p_page and the loop unmapping the rbio page was
iterating over the wrong number of stripes: unmapping should be done
with nr_data instead of rbio->real_stripes.

Test case to reproduce the bug:

 - create a raid5 btrfs filesystem:
   # mkfs.btrfs -m raid5 -d raid5 /dev/sdb /dev/sdc /dev/sdd /dev/sde

 - mount it:
   # mount /dev/sdb /mnt

 - run btrfs scrub in a loop:
   # while :; do btrfs scrub start -BR /mnt; done

BugLink: https://bugs.launchpad.net/bugs/1812845
Fixes: 5a6ac9ea ("Btrfs, raid56: support parity scrub on raid56")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NAndrea Righi <andrea.righi@canonical.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0cc068e6ee59c1fffbfa977d8bf868b7551d80ac upstream.

As readahead is an optimization, all errors are usually filtered out,
but still properly handled when the real read call is done. The commit
5e9d3982 ("btrfs: readpages() should submit IO as read-ahead") added
REQ_RAHEAD to readpages() because that's only used for readahead
(despite what one would expect from the callback name).

This causes a flood of messages and inflated read error stats, so skip
reporting in case it's readahead.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202403Reported-by: NLimeTech <tomm@lime-technology.com>
Fixes: 5e9d3982 ("btrfs: readpages() should submit IO as read-ahead")
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2cc8334270e281815c3850c3adea363c51f21e0d upstream.

When Filipe added the recursive directory logging stuff in
2f2ff0ee ("Btrfs: fix metadata inconsistencies after directory
fsync") he specifically didn't take the directory i_mutex for the
children directories that we need to log because of lockdep.  This is
generally fine, but can lead to this WARN_ON() tripping if we happen to
run delayed deletion's in between our first search and our second search
of dir_item/dir_indexes for this directory.  We expect this to happen,
so the WARN_ON() isn't necessary.  Drop the WARN_ON() and add a comment
so we know why this case can happen.

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit bf504110bc8aa05df48b0e5f0aa84bfb81e0574b upstream.

If we do a shrinking truncate against an inode which is already present
in the respective log tree and then rename it, as part of logging the new
name we end up logging an inode item that reflects the old size of the
file (the one which we previously logged) and not the new smaller size.
The decision to preserve the size previously logged was added by commit
1a4bcf47 ("Btrfs: fix fsync data loss after adding hard link to
inode") in order to avoid data loss after replaying the log. However that
decision is only needed for the case the logged inode size is smaller then
the current size of the inode, as explained in that commit's change log.
If the current size of the inode is smaller then the previously logged
size, we know a shrinking truncate happened and therefore need to use
that smaller size.

Example to trigger the problem:

  $ mkfs.btrfs -f /dev/sdb
  $ mount /dev/sdb /mnt

  $ xfs_io -f -c "pwrite -S 0xab 0 8000" /mnt/foo
  $ xfs_io -c "fsync" /mnt/foo
  $ xfs_io -c "truncate 3000" /mnt/foo

  $ mv /mnt/foo /mnt/bar
  $ xfs_io -c "fsync" /mnt/bar

  <power failure>

  $ mount /dev/sdb /mnt
  $ od -t x1 -A d /mnt/bar
  0000000 ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab
  *
  0008000

Once we rename the file, we log its name (and inode item), and because
the inode was already logged before in the current transaction, we log it
with a size of 8000 bytes because that is the size we previously logged
(with the first fsync). As part of the rename, besides logging the inode,
we do also sync the log, which is done since commit d4682ba0
("Btrfs: sync log after logging new name"), so the next fsync against our
inode is effectively a no-op, since no new changes happened since the
rename operation. Even if did not sync the log during the rename
operation, the same problem (fize size of 8000 bytes instead of 3000
bytes) would be visible after replaying the log if the log ended up
getting synced to disk through some other means, such as for example by
fsyncing some other modified file. In the example above the fsync after
the rename operation is there just because not every filesystem may
guarantee logging/journalling the inode (and syncing the log/journal)
during the rename operation, for example it is needed for f2fs, but not
for ext4 and xfs.

Fix this scenario by, when logging a new name (which is triggered by
rename and link operations), using the current size of the inode instead
of the previously logged inode size.

A test case for fstests follows soon.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202695
CC: stable@vger.kernel.org # 4.4+
Reported-by: NSeulbae Kim <seulbae@gatech.edu>
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 92edf8df0ff2ae86cc632eeca0e651fd8431d40d upstream.

When I updated the spectre_v2 reporting to handle software count cache
flush I got the logic wrong when there's no software count cache
enabled at all.

The result is that on systems with the software count cache flush
disabled we print:

  Mitigation: Indirect branch cache disabled, Software count cache flush

Which correctly indicates that the count cache is disabled, but
incorrectly says the software count cache flush is enabled.

The root of the problem is that we are trying to handle all
combinations of options. But we know now that we only expect to see
the software count cache flush enabled if the other options are false.

So split the two cases, which simplifies the logic and fixes the bug.
We were also missing a space before "(hardware accelerated)".

The result is we see one of:

  Mitigation: Indirect branch serialisation (kernel only)
  Mitigation: Indirect branch cache disabled
  Mitigation: Software count cache flush
  Mitigation: Software count cache flush (hardware accelerated)

Fixes: ee13cb24 ("powerpc/64s: Add support for software count cache flush")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Reviewed-by: NMichael Neuling <mikey@neuling.org>
Reviewed-by: NDiana Craciun <diana.craciun@nxp.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 27da80719ef132cf8c80eb406d5aeb37dddf78cc upstream.

The commit identified below adds MC_BTB_FLUSH macro only when
CONFIG_PPC_FSL_BOOK3E is defined. This results in the following error
on some configs (seen several times with kisskb randconfig_defconfig)

arch/powerpc/kernel/exceptions-64e.S:576: Error: Unrecognized opcode: `mc_btb_flush'
make[3]: *** [scripts/Makefile.build:367: arch/powerpc/kernel/exceptions-64e.o] Error 1
make[2]: *** [scripts/Makefile.build:492: arch/powerpc/kernel] Error 2
make[1]: *** [Makefile:1043: arch/powerpc] Error 2
make: *** [Makefile:152: sub-make] Error 2

This patch adds a blank definition of MC_BTB_FLUSH for other cases.

Fixes: 10c5e83afd4a ("powerpc/fsl: Flush the branch predictor at each kernel entry (64bit)")
Cc: Diana Craciun <diana.craciun@nxp.com>
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: NDaniel Axtens <dja@axtens.net>
Reviewed-by: NDiana Craciun <diana.craciun@nxp.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 039daac5526932ec731e4499613018d263af8b3e upstream.

Fixed the following build warning:
powerpc-linux-gnu-ld: warning: orphan section `__btb_flush_fixup' from
`arch/powerpc/kernel/head_44x.o' being placed in section
`__btb_flush_fixup'.
Signed-off-by: NDiana Craciun <diana.craciun@nxp.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit dfa88658fb0583abb92e062c7a9cd5a5b94f2a46 upstream.

Report branch predictor state flush as a mitigation for
Spectre variant 2.
Signed-off-by: NDiana Craciun <diana.craciun@nxp.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3bc8ea8603ae4c1e09aca8de229ad38b8091fcb3 upstream.

If the user choses not to use the mitigations, replace
the code sequence with nops.
Signed-off-by: NDiana Craciun <diana.craciun@nxp.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>