Signed-off-by: NTomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Needed in several Chromebook models such as the Tegra-based ones.
Signed-off-by: NTomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Needed in several Chromebook models such as the Tegra-based ones.
Signed-off-by: NTomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

This brings the DevFreq framework in and builds the ACTMON driver that
on Tegra124 will scale the external memory clock based on current load.
Signed-off-by: NTomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Renesas R-Car sound (= rsnd) needs 2 DMAC which are called as
Audio DMAC (= 1st DMAC) and Audio DMAC peri peri (2nd DMAC).
And rsnd had assumed that 1st / 2nd DMACs are implemented as DMAEngine.
But, in result of DMA ML discussion, 2nd DMAC was concluded that it is
not a general purpose DMAC (2nd DMAC is for Device to Device inside
sound system). Additionally, current DMAEngine can't support Device to
Device, and we don't have correct DT bindings for it at this point.
So the easiest solution for it is that move it from DMAEngine to rsnd
driver.
Audio DMAC peri peri DMAEngine is no longer needed.
Remove all CONFIG_RCAR_AUDMAC_PP from ARM defconfigs
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Following the introduction of the Marvell Armada 39x support, let's
enable this support by default in multi_v7_defconfig.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: <arm@kernel.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

There are currently more than 16 partitions on the eMMC of all recent
Qualcomm devices. Increase the number of minors per block device to
detect all available partitions.
Signed-off-by: NGeorgi Djakov <gdjakov@mm-sol.com>
Signed-off-by: NKumar Gala <galak@codeaurora.org>

Now that Armada 375/38x have support for the PMU, this commit enables perf
events in the defconfig.
Signed-off-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>

After removing ARCH_REQUIRE_GPIOLIB we need to select
CONFIG_GPIOLIB to keep building the pinctrl drivers. Make the
defconfig smaller too by running savedefconfig.
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NKumar Gala <galak@codeaurora.org>

Enable the LPASS clock controller driver so that audio drivers
can enable, disable, and set rates on their clocks.
Signed-off-by: NRajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: NKumar Gala <galak@codeaurora.org>
[sboyd@codeaurora.org: Enable 8960 driver too]
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NKumar Gala <galak@codeaurora.org>

Enable n900 modem as loadable modules.
Acked-by: NAcked-By: Sebastian Reichel <sre@kernel.org>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Many omaps have bluetooth, so let's make it available
as modules.
Signed-off-by: NTony Lindgren <tony@atomide.com>

This is used on many omap boards.
Signed-off-by: NTony Lindgren <tony@atomide.com>

scripts/checkkconfigsymbols.py indicates that omap1_defconfig
references the following obsolete Kconfig symbols:

CONFIG_BT_L2CAP
CONFIG_BT_SCO
CONFIG_DEBUG_ERRORS
CONFIG_EXPERIMENTAL
CONFIG_FB_OMAP_BOOTLOADER_INIT
CONFIG_LEDS_CPU
CONFIG_MACH_OMAP_HTCWIZARD
CONFIG_MTD_CHAR
CONFIG_MTD_DEBUG
CONFIG_MTD_DEBUG_VERBOSE
CONFIG_MTD_PARTITIONS
CONFIG_NET_ETHERNET
CONFIG_RCU_CPU_STALL_DETECTOR
CONFIG_SCSI_MULTI_LUN
CONFIG_USB_DEVICE_CLASS
CONFIG_VIDEO_OUTPUT_CONTROL

Drop them from omap1_defconfig.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: Valentin Rothberg <valentinrothberg@gmail.com>
Cc: Stefan Hengelein <stefan.hengelein@fau.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-omap@vger.kernel.org
Signed-off-by: NTony Lindgren <tony@atomide.com>

LZMA compression makes about 33% smaller zImage
with just a slight extra decompression time.

Before this patch, zImage built with o2+_dc
is 4.5MiB and after it's about 3.3MiB.
Suggested-by: NDavid Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

This driver is needed for USB cable type detection on dra7-evm,
dra72-evm and am57xx-beagle-x15.
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Following the introduction of the Marvell Armada 39x support, let's
enabled it by default in mvebu_v7_defconfig.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>

Enable support for shmobile platforms that became multi-platform aware.
Several non-critical drivers and subsystems are built as modules, to keep
kernel size reasonable.

Tested on:
  - r8a73a4/ape6evm:
      - U-Boot fails with "Error: unrecognized/unsupported machine ID",
      - kexec works.
  - r8a7740/armadillo:
      - Hermit boot loader fails (larger image, more memory corruption),
      - kexec works.
  - r8a7791/koelsch,
  - sh73a0/kzm9g:
      - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n,
      - kexec works.
  - am335x/boneblack.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

SERIAL_8250_EXTENDED only serves as a guard for other Kconfig options,
none of which is enabled in shmobile_defconfig.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

SATA operation depends on PIPE3 PHY and if we want
to boot from SATA drives, we have to have the PIPE3 PHY
driver built-in.
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Without this NAND doesn't work on most EVMs.
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

This regulator is used on AM437x Industrial Development Kit.
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

This is used on R-Mobile APE6 (r8a73a4), R-Mobile A1 (r8a7740), and
SH-Mobile AG5 (sh73a0).
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

The a80 optimus has 8 CPUs. I propose we increase the maximum number of CPUs to 8 to avoid the following warning identified during automated boot testing [1].

------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at ../arch/arm/kernel/devtree.c:144 arm_dt_init_cpu_maps+0x110/0x1e0()
DT /cpu 5 nodes greater than max cores 4, capping them
CPU: 0 PID: 0 Comm: swapper Not tainted 3.19.0-00528-gbdccc4ed #1
Hardware name: Allwinner sun9i Family
[] (unwind_backtrace) from [] (show_stack+0x10/0x14)
[] (show_stack) from [] (dump_stack+0x74/0x90)
[] (dump_stack) from [] (warn_slowpath_common+0x70/0xac)
[] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40)
[] (warn_slowpath_fmt) from [] (arm_dt_init_cpu_maps+0x110/0x1e0)
[] (arm_dt_init_cpu_maps) from [] (setup_arch+0x634/0x8d4)
[] (setup_arch) from [] (start_kernel+0x88/0x3ac)
[] (start_kernel) from [<20008074>] (0x20008074)
---[ end trace cb88537fdc8fa200 ]---

[1] http://storage.kernelci.org/mainline/v3.19-528-gbdccc4edeb03/arm-sunxi_defconfig/lab-tbaker/boot-sun9i-a80-optimus.html

Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Kevin Hilman <khilman@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NTyler Baker <tyler.baker@linaro.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

On sun9i we have a new PHY driver for USB.
Signed-off-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

On sun9i we have a new PHY driver for USB.
Signed-off-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

Now that the Armada 38x RTC driver has been pushed, let's enable it in
mvebu_v7_defconfig.
Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Arnaud Ebalard <arno@natisbad.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Boris BREZILLON <boris.brezillon@free-electrons.com>
Cc: Lior Amsalem <alior@marvell.com>
Cc: Tawfik Bayouk <tawfik@marvell.com>
Cc: Nadav Haklai <nadavh@marvell.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Only use SOC_AT91SAM9 for all the at91sam9 SoCs. It removes all the empty
at91sam9xxx.c SoC files. It also removes the useless at91_init_soc affectation
procedure and its "init" function pointer.
Only the SoC detection and display are kept for the at91sam9:
at91_soc_is_enabled() and at91_boot_soc.map_io() function calls are also
removed.

It enables HAVE_AT91_SMD and HAVE_AT91_UTMI for all the sam9 SoCs but this only
represents 96 bytes of uncompressed kernel code.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
[nicolas.ferre@atmel.com: different organization of the patches]
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

When using network driver on keystone and nfs rootfs is used following
error displayed and device halts.

Missing devtmpfs, which is required for udev to run
Halting...

Add the DEVTMPFS option by default to fix this
Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: NSantosh Shilimkar <ssantosh@kernel.org>

The Exynos5420 cluster power management support allowing Exynos
5420/5422/5800 machines to power up and down the secondary CPUs.

Without this option enabled, the secondary CPUs are not brought
up on boot and the following error is shown:

CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x40938e90 - 0x40938f28
ARM CCI driver probed
CPU1: failed to boot: -38
CPU2: failed to boot: -38
CPU3: failed to boot: -38
CPU4: failed to boot: -38
CPU5: failed to boot: -38
CPU6: failed to boot: -38
CPU7: failed to boot: -38
Brought up 1 CPUs
Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: NOlof Johansson <olof@lixom.net>

eb451348
(ARM: shmobile: Enable kzm9g board in multiplatform defconfig)
dropped CONFIG_REGULATOR from shmobile_defconfig as it was
generated using a tree where CONFIG_REGULATOR is indirectly
selected by ARCH_SH73A0.

ARCH_SH73A0 is not queued up for v3.20 and thus, baring unforeseen
changes, CONFIG_REGULATOR will not be selected by shmobile_defconfig
in that release. This causes at least SDHI to stop working on
R-Car Gen2 SoCs.
Reported-by: NMagnus Damm <damm+renesas@opensource.se>
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
[horms: minimal patch targeted as a fix]
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

CONFIG_FHANDLE is required by systemd, which is the default init system
in more and more distributions. So lets enable it for Exynos as well
(it's already enabled in multi_v7_defconfig)
Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: NAndreas Faerber <afaerber@suse.de>
Signed-off-by: NKukjin Kim <kgene@kernel.org>

Enable drivers for PMICs and MUICs present on Exynos-based devices:
 - max14577: charger, extcon, fuel gauge (max17040), regulator,
   used on: Gear 1, Gear 2,
 - max77693: charger, extcon, fuel gauge (max17042),
   used on: Trats2,

This allows full usage of charging stack on these devices along with
extcon connector.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NKukjin Kim <kgene@kernel.org>

On enabling CONFIG_LOCKUP_DETECTOR the kernel to act as a watchdog
to detect hard and soft lockups. Enabling CONFIG_LOCKUP_DETECTOR
don't introduce much overhead on exyons SOC.
(CONFIG_LOCKUP_DETECTOR is enabled on multi_v7_defconfig.)

Tested on Exynos5422 ODROID XU3 board.
Reviewed-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NAnand Moon <moon.linux@yahoo.com>
Signed-off-by: NKukjin Kim <kgene@kernel.org>

Make hip01 share the hisi_defconfig.
Signed-off-by: NWang Long <long.wanglong@huawei.com>
Signed-off-by: NWei Xu <xuwei5@hisilicon.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

All defconfigs touched by this patch already enable DEBUG_LL and by
default DEBUG_LL_UART_NONE will be selected. This causes no issues
today because due to some back compatibility magic we eventually need
to remove it is not actually honoured. Nevertheless DEBUG_LL_UART_8250
is the right value for these platforms and should be set in the config
files.
Signed-off-by: NDaniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Enable CONFIG_USB_EHCI_HCD and CONFIG_USB_OHCI_HCD to get USB supports
with omap2plus_defconfig.
Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

BeagleBoard-X15 has options such as rtc, fan that need to be functional
Signed-off-by: NNishanth Menon <nm@ti.com>
Reviewed-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>