- 02 9月, 2016 17 次提交
-
-
由 Linus Torvalds 提交于
Merge fixes from Andrew Morton: "14 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: rapidio/tsi721: fix incorrect detection of address translation condition rapidio/documentation/mport_cdev: add missing parameter description kernel/fork: fix CLONE_CHILD_CLEARTID regression in nscd MAINTAINERS: Vladimir has moved mm, mempolicy: task->mempolicy must be NULL before dropping final reference printk/nmi: avoid direct printk()-s from __printk_nmi_flush() treewide: remove references to the now unnecessary DEFINE_PCI_DEVICE_TABLE drivers/scsi/wd719x.c: remove last declaration using DEFINE_PCI_DEVICE_TABLE mm, vmscan: only allocate and reclaim from zones with pages managed by the buddy allocator lib/test_hash.c: fix warning in preprocessor symbol evaluation lib/test_hash.c: fix warning in two-dimensional array init kconfig: tinyconfig: provide whole choice blocks to avoid warnings kexec: fix double-free when failing to relocate the purgatory mm, oom: prevent premature OOM killer invocation for high order request
-
由 Alexandre Bounine 提交于
Fix incorrect condition to identify involvment of a address translation mechanism. This bug results in NULL pointer kernel crash dump in cases when mapping of inbound RapidIO address range is requested within existing aprture. Link: http://lkml.kernel.org/r/20160901173144.2983-1-alexandre.bounine@idt.comSigned-off-by: NAlexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Cc: <stable@vger.kernel.org> [4.6+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexandre Bounine 提交于
Add missing description for rio_mport_cdev driver parameter 'dma_timeout'. This patch is applicable to kernel versions starting from v4.6. Link: http://lkml.kernel.org/r/20160901173104.2928-1-alexandre.bounine@idt.comSigned-off-by: NAlexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Hocko 提交于
Commit fec1d011 ("[PATCH] Disable CLONE_CHILD_CLEARTID for abnormal exit") has caused a subtle regression in nscd which uses CLONE_CHILD_CLEARTID to clear the nscd_certainly_running flag in the shared databases, so that the clients are notified when nscd is restarted. Now, when nscd uses a non-persistent database, clients that have it mapped keep thinking the database is being updated by nscd, when in fact nscd has created a new (anonymous) one (for non-persistent databases it uses an unlinked file as backend). The original proposal for the CLONE_CHILD_CLEARTID change claimed (https://lkml.org/lkml/2006/10/25/233): : The NPTL library uses the CLONE_CHILD_CLEARTID flag on clone() syscalls : on behalf of pthread_create() library calls. This feature is used to : request that the kernel clear the thread-id in user space (at an address : provided in the syscall) when the thread disassociates itself from the : address space, which is done in mm_release(). : : Unfortunately, when a multi-threaded process incurs a core dump (such as : from a SIGSEGV), the core-dumping thread sends SIGKILL signals to all of : the other threads, which then proceed to clear their user-space tids : before synchronizing in exit_mm() with the start of core dumping. This : misrepresents the state of process's address space at the time of the : SIGSEGV and makes it more difficult for someone to debug NPTL and glibc : problems (misleading him/her to conclude that the threads had gone away : before the fault). : : The fix below is to simply avoid the CLONE_CHILD_CLEARTID action if a : core dump has been initiated. The resulting patch from Roland (https://lkml.org/lkml/2006/10/26/269) seems to have a larger scope than the original patch asked for. It seems that limitting the scope of the check to core dumping should work for SIGSEGV issue describe above. [Changelog partly based on Andreas' description] Fixes: fec1d011 ("[PATCH] Disable CLONE_CHILD_CLEARTID for abnormal exit") Link: http://lkml.kernel.org/r/1471968749-26173-1-git-send-email-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com> Tested-by: NWilliam Preston <wpreston@suse.com> Acked-by: NOleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Andreas Schwab <schwab@suse.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vladimir Davydov 提交于
vdavydov@{parallels,virtuozzo}.com will bounce from now on. Link: http://lkml.kernel.org/r/20160831180752.GB10353@esperanzaSigned-off-by: NVladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Rientjes 提交于
KASAN allocates memory from the page allocator as part of kmem_cache_free(), and that can reference current->mempolicy through any number of allocation functions. It needs to be NULL'd out before the final reference is dropped to prevent a use-after-free bug: BUG: KASAN: use-after-free in alloc_pages_current+0x363/0x370 at addr ffff88010b48102c CPU: 0 PID: 15425 Comm: trinity-c2 Not tainted 4.8.0-rc2+ #140 ... Call Trace: dump_stack kasan_object_err kasan_report_error __asan_report_load2_noabort alloc_pages_current <-- use after free depot_save_stack save_stack kasan_slab_free kmem_cache_free __mpol_put <-- free do_exit This patch sets current->mempolicy to NULL before dropping the final reference. Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1608301442180.63329@chino.kir.corp.google.com Fixes: cd11016e ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB") Signed-off-by: NDavid Rientjes <rientjes@google.com> Reported-by: NVegard Nossum <vegard.nossum@oracle.com> Acked-by: NAndrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> [4.6+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sergey Senozhatsky 提交于
__printk_nmi_flush() can be called from nmi_panic(), therefore it has to test whether it's executed in NMI context and thus must route the messages through deferred printk() or via direct printk(). This is to avoid potential deadlocks, as described in commit cf9b1106 ("printk/nmi: flush NMI messages on the system panic"). However there remain two places where __printk_nmi_flush() does unconditional direct printk() calls: - pr_err("printk_nmi_flush: internal error ...") - pr_cont("\n") Factor out print_nmi_seq_line() parts into a new printk_nmi_flush_line() function, which takes care of in_nmi(), and use it in __printk_nmi_flush() for printing and error-reporting. Link: http://lkml.kernel.org/r/20160830161354.581-1-sergey.senozhatsky@gmail.comSigned-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
It's been eliminated from the sources, remove it from everywhere else. Link: http://lkml.kernel.org/r/076eff466fd7edb550c25c8b25d76924ca0eba62.1472660229.git.joe@perches.comSigned-off-by: NJoe Perches <joe@perches.com> Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Convert it to the preferred const struct pci_device_id instead. Link: http://lkml.kernel.org/r/95c5e4100c3cd4eda643624f5b70e8d7abceb86c.1472660229.git.joe@perches.comSigned-off-by: NJoe Perches <joe@perches.com> Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com> Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mel Gorman 提交于
Firmware Assisted Dump (FA_DUMP) on ppc64 reserves substantial amounts of memory when booting a secondary kernel. Srikar Dronamraju reported that multiple nodes may have no memory managed by the buddy allocator but still return true for populated_zone(). Commit 1d82de61 ("mm, vmscan: make kswapd reclaim in terms of nodes") was reported to cause kswapd to spin at 100% CPU usage when fadump was enabled. The old code happened to deal with the situation of a populated node with zero free pages by co-incidence but the current code tries to reclaim populated zones without realising that is impossible. We cannot just convert populated_zone() as many existing users really need to check for present_pages. This patch introduces a managed_zone() helper and uses it in the few cases where it is critical that the check is made for managed pages -- zonelist construction and page reclaim. Link: http://lkml.kernel.org/r/20160831195104.GB8119@techsingularity.netSigned-off-by: NMel Gorman <mgorman@techsingularity.net> Reported-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com> Tested-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: NMichal Hocko <mhocko@suse.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
Some versions of gcc don't like tests for the value of an undefined preprocessor symbol, even in the #else branch of an #ifndef: lib/test_hash.c:224:7: warning: "HAVE_ARCH__HASH_32" is not defined [-Wundef] #elif HAVE_ARCH__HASH_32 != 1 ^ lib/test_hash.c:229:7: warning: "HAVE_ARCH_HASH_32" is not defined [-Wundef] #elif HAVE_ARCH_HASH_32 != 1 ^ lib/test_hash.c:234:7: warning: "HAVE_ARCH_HASH_64" is not defined [-Wundef] #elif HAVE_ARCH_HASH_64 != 1 ^ Seen with gcc 4.9, not seen with 4.1.2. Change the logic to only check the value inside an #ifdef to fix this. Fixes: 468a9428 ("<linux/hash.h>: Add support for architecture-specific functions") Link: http://lkml.kernel.org/r/20160829214952.1334674-4-arnd@arndb.deSigned-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NGeorge Spelvin <linux@sciencehorizons.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
lib/test_hash.c: In function 'test_hash_init': lib/test_hash.c:146:2: warning: missing braces around initializer [-Wmissing-braces] Fixes: 468a9428 ("<linux/hash.h>: Add support for architecture-specific functions") Link: http://lkml.kernel.org/r/20160829214952.1334674-3-arnd@arndb.deSigned-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NGeorge Spelvin <linux@sciencehorizons.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Arnd Bergmann 提交于
Using "make tinyconfig" produces a couple of annoying warnings that show up for build test machines all the time: .config:966:warning: override: NOHIGHMEM changes choice state .config:965:warning: override: SLOB changes choice state .config:963:warning: override: KERNEL_XZ changes choice state .config:962:warning: override: CC_OPTIMIZE_FOR_SIZE changes choice state .config:933:warning: override: SLOB changes choice state .config:930:warning: override: CC_OPTIMIZE_FOR_SIZE changes choice state .config:870:warning: override: SLOB changes choice state .config:868:warning: override: KERNEL_XZ changes choice state .config:867:warning: override: CC_OPTIMIZE_FOR_SIZE changes choice state I've made a previous attempt at fixing them and we discussed a number of alternatives. I tried changing the Makefile to use "merge_config.sh -n $(fragment-list)" but couldn't get that to work properly. This is yet another approach, based on the observation that we do want to see a warning for conflicting 'choice' options, and that we can simply make them non-conflicting by listing all other options as disabled. This is a trivial patch that we can apply independent of plans for other changes. Link: http://lkml.kernel.org/r/20160829214952.1334674-2-arnd@arndb.de Link: https://storage.kernelci.org/mainline/v4.7-rc6/x86-tinyconfig/build.log https://patchwork.kernel.org/patch/9212749/Signed-off-by: NArnd Bergmann <arnd@arndb.de> Reviewed-by: NJosh Triplett <josh@joshtriplett.org> Reviewed-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NIngo Molnar <mingo@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Thiago Jung Bauermann 提交于
If kexec_apply_relocations fails, kexec_load_purgatory frees pi->sechdrs and pi->purgatory_buf. This is redundant, because in case of error kimage_file_prepare_segments calls kimage_file_post_load_cleanup, which will also free those buffers. This causes two warnings like the following, one for pi->sechdrs and the other for pi->purgatory_buf: kexec-bzImage64: Loading purgatory failed ------------[ cut here ]------------ WARNING: CPU: 1 PID: 2119 at mm/vmalloc.c:1490 __vunmap+0xc1/0xd0 Trying to vfree() nonexistent vm area (ffffc90000e91000) Modules linked in: CPU: 1 PID: 2119 Comm: kexec Not tainted 4.8.0-rc3+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: dump_stack+0x4d/0x65 __warn+0xcb/0xf0 warn_slowpath_fmt+0x4f/0x60 ? find_vmap_area+0x19/0x70 ? kimage_file_post_load_cleanup+0x47/0xb0 __vunmap+0xc1/0xd0 vfree+0x2e/0x70 kimage_file_post_load_cleanup+0x5e/0xb0 SyS_kexec_file_load+0x448/0x680 ? putname+0x54/0x60 ? do_sys_open+0x190/0x1f0 entry_SYSCALL_64_fastpath+0x13/0x8f ---[ end trace 158bb74f5950ca2b ]--- Fix by setting pi->sechdrs an pi->purgatory_buf to NULL, since vfree won't try to free a NULL pointer. Link: http://lkml.kernel.org/r/1472083546-23683-1-git-send-email-bauerman@linux.vnet.ibm.comSigned-off-by: NThiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Acked-by: NBaoquan He <bhe@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Dave Young <dyoung@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Hocko 提交于
There have been several reports about pre-mature OOM killer invocation in 4.7 kernel when order-2 allocation request (for the kernel stack) invoked OOM killer even during basic workloads (light IO or even kernel compile on some filesystems). In all reported cases the memory is fragmented and there are no order-2+ pages available. There is usually a large amount of slab memory (usually dentries/inodes) and further debugging has shown that there are way too many unmovable blocks which are skipped during the compaction. Multiple reporters have confirmed that the current linux-next which includes [1] and [2] helped and OOMs are not reproducible anymore. A simpler fix for the late rc and stable is to simply ignore the compaction feedback and retry as long as there is a reclaim progress and we are not getting OOM for order-0 pages. We already do that for CONFING_COMPACTION=n so let's reuse the same code when compaction is enabled as well. [1] http://lkml.kernel.org/r/20160810091226.6709-1-vbabka@suse.cz [2] http://lkml.kernel.org/r/f7a9ea9d-bb88-bfd6-e340-3a933559305a@suse.cz Fixes: 0a0337e0 ("mm, oom: rework oom detection") Link: http://lkml.kernel.org/r/20160823074339.GB23577@dhcp22.suse.czSigned-off-by: NMichal Hocko <mhocko@suse.com> Tested-by: NOlaf Hering <olaf@aepfle.de> Tested-by: NRalf-Peter Rohbeck <Ralf-Peter.Rohbeck@quantum.com> Cc: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: Arkadiusz Miskiewicz <a.miskiewicz@gmail.com> Cc: Ralf-Peter Rohbeck <Ralf-Peter.Rohbeck@quantum.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: David Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> [4.7.x] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.infradead.org/users/pcmoore/audit由 Linus Torvalds 提交于
Pull audit fixes from Paul Moore: "Two small patches to fix some bugs with the audit-by-executable functionality we introduced back in v4.3 (both patches are marked for the stable folks)" * 'stable-4.8' of git://git.infradead.org/users/pcmoore/audit: audit: fix exe_file access in audit_exe_compare mm: introduce get_task_exe_file
-
由 Linus Torvalds 提交于
Merge tag 'xfs-iomap-for-linus-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs Pull xfs and iomap fixes from Dave Chinner: "Most of these changes are small regression fixes that address problems introduced in the 4.8-rc1 window. The two fixes that aren't (IO completion fix and superblock inprogress check) are fixes for problems introduced some time ago and need to be pushed back to stable kernels. Changes in this update: - iomap FIEMAP_EXTENT_MERGED usage fix - additional mount-time feature restrictions - rmap btree query fixes - freeze/unmount io completion workqueue fix - memory corruption fix for deferred operations handling" * tag 'xfs-iomap-for-linus-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: xfs: track log done items directly in the deferred pending work item iomap: don't set FIEMAP_EXTENT_MERGED for extent based filesystems xfs: prevent dropping ioend completions during buftarg wait xfs: fix superblock inprogress check xfs: simple btree query range should look right if LE lookup fails xfs: fix some key handling problems in _btree_simple_query_range xfs: don't log the entire end of the AGF xfs: disallow mounting of realtime + rmap filesystems xfs: don't perform lookups on zero-height btrees
-
- 01 9月, 2016 4 次提交
-
-
由 Mateusz Guzik 提交于
Prior to the change the function would blindly deference mm, exe_file and exe_file->f_inode, each of which could have been NULL or freed. Use get_task_exe_file to safely obtain stable exe_file. Signed-off-by: NMateusz Guzik <mguzik@redhat.com> Acked-by: NKonstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: NRichard Guy Briggs <rgb@redhat.com> Cc: <stable@vger.kernel.org> # 4.3.x Signed-off-by: NPaul Moore <paul@paul-moore.com>
-
由 Mateusz Guzik 提交于
For more convenient access if one has a pointer to the task. As a minor nit take advantage of the fact that only task lock + rcu are needed to safely grab ->exe_file. This saves mm refcount dance. Use the helper in proc_exe_link. Signed-off-by: NMateusz Guzik <mguzik@redhat.com> Acked-by: NKonstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: NRichard Guy Briggs <rgb@redhat.com> Cc: <stable@vger.kernel.org> # 4.3.x Signed-off-by: NPaul Moore <paul@paul-moore.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
Pull crypto fixes from Herbert Xu: "This fixes the following issues: - Kconfig problem that prevented mxc-rnga from being enabled - bogus key sizes in qat aes-xts - buggy aes-xts code in vmx" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: vmx - fix null dereference in p8_aes_xts_crypt crypto: qat - fix aes-xts key sizes hwrng: mxc-rnga - Fix Kconfig dependency
-
由 Linus Torvalds 提交于
We used to delay switching to the new credentials until after we had mapped the executable (and possible elf interpreter). That was kind of odd to begin with, since the new executable will actually then _run_ with the new creds, but whatever. The bigger problem was that we also want to make sure that we turn off prof events and tracing before we start mapping the new executable state. So while this is a cleanup, it's also a fix for a possible information leak. Reported-by: NRobert Święcki <robert@swiecki.net> Tested-by: NPeter Zijlstra <peterz@infradead.org> Acked-by: NDavid Howells <dhowells@redhat.com> Acked-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NAndy Lutomirski <luto@amacapital.net> Acked-by: NEric W. Biederman <ebiederm@xmission.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 31 8月, 2016 7 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux由 Linus Torvalds 提交于
Pull seccomp fix from Kees Cook: "Fix fatal signal delivery after ptrace reordering" * tag 'seccomp-v4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: seccomp: Fix tracer exit notifications during fatal signals
-
由 Kees Cook 提交于
This fixes a ptrace vs fatal pending signals bug as manifested in seccomp now that seccomp was reordered to happen after ptrace. The short version is that seccomp should not attempt to call do_exit() while fatal signals are pending under a tracer. The existing code was trying to be as defensively paranoid as possible, but it now ends up confusing ptrace. Instead, the syscall can just be skipped (which solves the original concern that the do_exit() was addressing) and normal signal handling, tracer notification, and process death can happen. Paraphrasing from the original bug report: If a tracee task is in a PTRACE_EVENT_SECCOMP trap, or has been resumed after such a trap but not yet been scheduled, and another task in the thread-group calls exit_group(), then the tracee task exits without the ptracer receiving a PTRACE_EVENT_EXIT notification. Test case here: https://gist.github.com/khuey/3c43ac247c72cef8c956ca73281c9be7 The bug happens because when __seccomp_filter() detects fatal_signal_pending(), it calls do_exit() without dequeuing the fatal signal. When do_exit() sends the PTRACE_EVENT_EXIT notification and that task is descheduled, __schedule() notices that there is a fatal signal pending and changes its state from TASK_TRACED to TASK_RUNNING. That prevents the ptracer's waitpid() from returning the ptrace event. A more detailed analysis is here: https://github.com/mozilla/rr/issues/1762#issuecomment-237396255. Reported-by: NRobert O'Callahan <robert@ocallahan.org> Reported-by: NKyle Huey <khuey@kylehuey.com> Tested-by: NKyle Huey <khuey@kylehuey.com> Fixes: 93e35efb ("x86/ptrace: run seccomp after ptrace") Signed-off-by: NKees Cook <keescook@chromium.org> Acked-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NJames Morris <james.l.morris@oracle.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/shli/md由 Linus Torvalds 提交于
Pull MD fixes from Shaohua Li: "This includes several bug fixes: - Alexey Obitotskiy fixed a hang for faulty raid5 array with external management - Song Liu fixed two raid5 journal related bugs - Tomasz Majchrzak fixed a bad block recording issue and an accounting issue for raid10 - ZhengYuan Liu fixed an accounting issue for raid5 - I fixed a potential race condition and memory leak with DIF/DIX enabled - other trival fixes" * tag 'md/4.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: raid5: avoid unnecessary bio data set raid5: fix memory leak of bio integrity data raid10: record correct address of bad block md-cluster: fix error return code in join() r5cache: set MD_JOURNAL_CLEAN correctly md: don't print the same repeated messages about delayed sync operation md: remove obsolete ret in md_start_sync md: do not count journal as spare in GET_ARRAY_INFO md: Prevent IO hold during accessing to faulty raid5 array MD: hold mddev lock to change bitmap location raid5: fix incorrectly counter of conf->empty_inactive_list_nr raid10: increment write counter after bio is split
-
git://git.linux-nfs.org/projects/trondmy/linux-nfs由 Linus Torvalds 提交于
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Stable patches: - Fix a refcount leak in nfs_callback_up_net - Fix an Oopsable condition when the flexfile pNFS driver connection to the DS fails - Fix an Oopsable condition in NFSv4.1 server callback races - Ensure pNFS clients stop doing I/O to the DS if their lease has expired, as required by the NFSv4.1 protocol Bugfixes: - Fix potential looping in the NFSv4.x migration code - Patch series to close callback races for OPEN, LAYOUTGET and LAYOUTRETURN - Silence WARN_ON when NFSv4.1 over RDMA is in use - Fix a LAYOUTCOMMIT race in the pNFS/blocks client - Fix pNFS timeout issues when the DS fails" * tag 'nfs-for-4.8-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4.x: Fix a refcount leak in nfs_callback_up_net NFS4: Avoid migration loops pNFS/flexfiles: Fix an Oopsable condition when connection to the DS fails NFSv4.1: Remove obsolete and incorrrect assignment in nfs4_callback_sequence NFSv4.1: Close callback races for OPEN, LAYOUTGET and LAYOUTRETURN NFSv4.1: Defer bumping the slot sequence number until we free the slot NFSv4.1: Delay callback processing when there are referring triples NFSv4.1: Fix Oopsable condition in server callback races SUNRPC: Silence WARN_ON when NFSv4.1 over RDMA is in use pnfs/blocklayout: update last_write_offset atomically with extents pNFS: The client must not do I/O to the DS if it's lease has expired pNFS: Handle NFS4ERR_OLD_STATEID correctly in LAYOUTSTAT calls pNFS/flexfiles: Set reasonable default retrans values for the data channel NFS: Allow the mount option retrans=0 pNFS/flexfiles: Fix layoutstat periodic reporting
-
由 Josh Poimboeuf 提交于
There are three usercopy warnings which are currently being silenced for gcc 4.6 and newer: 1) "copy_from_user() buffer size is too small" compile warning/error This is a static warning which happens when object size and copy size are both const, and copy size > object size. I didn't see any false positives for this one. So the function warning attribute seems to be working fine here. Note this scenario is always a bug and so I think it should be changed to *always* be an error, regardless of CONFIG_DEBUG_STRICT_USER_COPY_CHECKS. 2) "copy_from_user() buffer size is not provably correct" compile warning This is another static warning which happens when I enable __compiletime_object_size() for new compilers (and CONFIG_DEBUG_STRICT_USER_COPY_CHECKS). It happens when object size is const, but copy size is *not*. In this case there's no way to compare the two at build time, so it gives the warning. (Note the warning is a byproduct of the fact that gcc has no way of knowing whether the overflow function will be called, so the call isn't dead code and the warning attribute is activated.) So this warning seems to only indicate "this is an unusual pattern, maybe you should check it out" rather than "this is a bug". I get 102(!) of these warnings with allyesconfig and the __compiletime_object_size() gcc check removed. I don't know if there are any real bugs hiding in there, but from looking at a small sample, I didn't see any. According to Kees, it does sometimes find real bugs. But the false positive rate seems high. 3) "Buffer overflow detected" runtime warning This is a runtime warning where object size is const, and copy size > object size. All three warnings (both static and runtime) were completely disabled for gcc 4.6 with the following commit: 2fb0815c ("gcc4: disable __compiletime_object_size for GCC 4.6+") That commit mistakenly assumed that the false positives were caused by a gcc bug in __compiletime_object_size(). But in fact, __compiletime_object_size() seems to be working fine. The false positives were instead triggered by #2 above. (Though I don't have an explanation for why the warnings supposedly only started showing up in gcc 4.6.) So remove warning #2 to get rid of all the false positives, and re-enable warnings #1 and #3 by reverting the above commit. Furthermore, since #1 is a real bug which is detected at compile time, upgrade it to always be an error. Having done all that, CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is no longer needed. Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Nilay Vaish <nilayvaish@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata由 Linus Torvalds 提交于
Pull libata fixes from Tejun Heo: "Two libata driver specific fixes for v4.8-rc4. Nothing too scary" * 'for-4.8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: pata_ninja32: Avoid corrupting status flags ahci: disable correct irq for dummy ports
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup由 Linus Torvalds 提交于
Pull cgroup fixes from Tejun Heo: "Two fixes for cgroup. - There still was a hole in enforcing cpuset rules, fixed by Li. - The recent switch to global percpu_rwseom for threadgroup locking revealed a couple issues in how percpu_rwsem is implemented and used by cgroup. Balbir found that the read locking section was too wide unnecessarily including operations which can often depend on IOs. With percpu_rwsem updates (coming through a different tree) and reduction of read locking section, all the reported locking latency issues, including the android one, are resolved. It looks like we can keep global percpu_rwsem locking for now. If there actually are cases which can't be resolved, we can go back to more complex per-signal_struct locking" * 'for-4.8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: reduce read locked section of cgroup_threadgroup_rwsem during fork cpuset: make sure new tasks conform to the current config of the cpuset
-
- 30 8月, 2016 10 次提交
-
-
由 Alan Cox 提交于
Ninja32 needs to set some flags to indicate it does 32bit IO. However it currently assigns this which loses the initializing flag and causes a warning spew. Fix it to use a logical or as is intended. Signed-off-by: NAlan Cox <alan@linux.intel.com> Tested-by: NEllmar Stelnberger <estellnb@elstel.org> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Trond Myklebust 提交于
On error, the callers expect us to return without bumping nn->cb_users[]. Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com> Cc: stable@vger.kernel.org # v3.7+
-
由 Benjamin Coddington 提交于
If a server returns itself as a location while migrating, the client may end up getting stuck attempting to migrate twice to the same server. Catch this by checking if the nfs_client found is the same as the existing client. For the other two callers to nfs4_set_client, the nfs_client will always be ERR_PTR(-EINVAL). Signed-off-by: NBenjamin Coddington <bcodding@redhat.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Darrick J. Wong 提交于
Christoph reports slab corruption when a deferred refcount update aborts during _defer_finish(). The cause of this was broken log item state tracking in xfs_defer_pending -- upon an abort, _defer_trans_abort() will call abort_intent on all intent items, including the ones that have already had a done item attached. This is incorrect because each intent item has 2 refcount: the first is released when the intent item is committed to the log; and the second is released when the _done_ item is committed to the log, or by the intent creator if there is no done item. In other words, once we log the done item, responsibility for releasing the intent item's second refcount is transferred to the done item and /must not/ be performed by anything else. The dfp_committed flag should have been tracking whether or not we had a done item so that _defer_trans_abort could decide if it needs to abort the intent item, but due to a thinko this was not the case. Rip it out and track the done item directly so that we do the right thing w.r.t. intent item freeing. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reported-by: NChristoph Hellwig <hch@infradead.org> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NDave Chinner <david@fromorbit.com>
-
由 Linus Torvalds 提交于
Merge tag 'hwmon-for-linus-v4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Add missing sysfs attribute group terminator to it87 driver" * tag 'hwmon-for-linus-v4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (it87) Add missing sysfs attribute group terminator
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
Pull ext4 fixes from Ted Ts'o: "Fix bugs that could cause kernel deadlocks or file system corruption while moving xattrs to expand the extended inode. Also add some sanity checks to the block group descriptors to make sure we don't end up overwriting the superblock" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: avoid deadlock when expanding inode size ext4: properly align shifted xattrs when expanding inodes ext4: fix xattr shifting when expanding inodes part 2 ext4: fix xattr shifting when expanding inodes ext4: validate that metadata blocks do not overlap superblock ext4: reserve xattr index for the Hurd
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Segregate namespaces properly in conntrack dumps, from Liping Zhang. 2) tcp listener refcount fix in netfilter tproxy, from Eric Dumazet. 3) Fix timeouts in qed driver due to xmit_more, from Yuval Mintz. 4) Fix use-after-free in tcp_xmit_retransmit_queue(). 5) Userspace header fixups (use of __u32, missing includes, etc.) from Mikko Rapeli. 6) Further refinements to fragmentation wrt gso and tunnels, from Shmulik Ladkani. 7) Trigger poll correctly for zero length UDP packets, from Eric Dumazet. 8) TCP window scaling fix, also from Eric Dumazet. 9) SLAB_DESTROY_BY_RCU is not relevant any more for UDP sockets. 10) Module refcount leak in qdisc_create_dflt(), from Eric Dumazet. 11) Fix deadlock in cp_rx_poll() of 8139cp driver, from Gao Feng. 12) Memory leak in rhashtable's alloc_bucket_locks(), from Eric Dumazet. 13) Add new device ID to alx driver, from Owen Lin. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (83 commits) Add Killer E2500 device ID in alx driver. net: smc91x: fix SMC accesses Documentation: networking: dsa: Remove platform device TODO net/mlx5: Increase number of ethtool steering priorities net/mlx5: Add error prints when validate ETS failed net/mlx5e: Fix memory leak if refreshing TIRs fails net/mlx5e: Add ethtool counter for TX xmit_more net/mlx5e: Fix ethtool -g/G rx ring parameter report with striding RQ net/mlx5e: Don't wait for SQ completions on close net/mlx5e: Don't post fragmented MPWQE when RQ is disabled net/mlx5e: Don't wait for RQ completions on close net/mlx5e: Limit UMR length to the device's limitation rhashtable: fix a memory leak in alloc_bucket_locks() sfc: fix potential stack corruption from running past stat bitmask team: loadbalance: push lacpdus to exact delivery net: hns: dereference ppe_cb->ppe_common_cb if it is non-null 8139cp: Fix one possible deadloop in cp_rx_poll i40e: Change some init flow for the client Revert "phy: IRQ cannot be shared" net: dsa: bcm_sf2: Fix race condition while unmasking interrupts ...
-
由 Trond Myklebust 提交于
If the attempt to connect to a DS fails inside ff_layout_pg_init_read or ff_layout_pg_init_write, then we currently end up clearing the layout segment carried by the struct nfs_pageio_descriptor, causing an Oops when we later call into ff_layout_read_pagelist/ff_layout_write_pagelist. The fix is to ensure we return the layout and then retry. Fixes: 446ca219 ("pNFS/flexfiles: When initing reads or writes, we...") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Linus Torvalds 提交于
Merge tag 'platform-drivers-x86-v4.8-4' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull x86 platform driver fixes from Darren Hart: "Remove module related code from two drivers that are only configurable as built-in: intel_pmic_gpio and platform/olpc" * tag 'platform-drivers-x86-v4.8-4' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: intel_pmic_gpio: Make explicitly non-modular platform/olpc: Make ec explicitly non-modular
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux由 Linus Torvalds 提交于
Pull powerpc fixes from Ben Herrenschmidt: "This was meant to be sent early last week, but I has a change pending on one of the fixes and other things made me forget all about. Ugh. We have some misc fixes for powerpc 4.8. Some trivial bits and some regressions, and a trivial cleanup or two that I saw no point in letting rot in patchwork" * tag 'powerpc-4.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: signals: Discard transaction state from signal frames powerpc/powernv : Drop reference added by kset_find_obj() powerpc/tm: do not use r13 for tabort_syscall powerpc: move hmi.c to arch/powerpc/kvm/ powerpc: sysdev: cpm: fix gpio save_regs functions powerpc/pseries: PACA save area fix for MCE vs MCE powerpc/pseries: PACA save area fix for general exception vs MCE powerpc/prom: Fix sub-processor option passed to ibm, client-architecture-support powerpc, hotplug: Avoid to touch non-existent cpumasks. powerpc: migrate exception table users off module.h and onto extable.h powerpc/powernv/pci: fix iterator signedness powerpc/pseries: use pci_host_bridge.release_fn() to kfree(phb) cxl: use pcibios_free_controller_deferred() when removing vPHBs powerpc: mpc8349emitx: Delete unnecessary assignment for the field "owner" powerpc/512x: Delete unnecessary assignment for the field "owner" drivers/macintosh: Delete owner assignment powerpc: cputhreads: Add missing include file
-
- 29 8月, 2016 2 次提交
-
-
由 Jean Delvare 提交于
Attribute array it87_attributes_in lacks its NULL terminator, causing random behavior when operating on the attribute group. Fixes: 52929715 ("hwmon: (it87) Use is_visible for voltage sensors") Signed-off-by: NJean Delvare <jdelvare@suse.de> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Paul Gortmaker 提交于
The Kconfig entry controlling compilation of this code is: drivers/platform/x86/Kconfig:config GPIO_INTEL_PMIC drivers/platform/x86/Kconfig: bool "Intel PMIC GPIO support" ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. We delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. We don't replace module.h with init.h since the file already has that. Cc: Alek Du <alek.du@intel.com> Cc: platform-driver-x86@vger.kernel.org Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-