Pull objtool fix from Thomas Gleixner:
 "Plug a memory leak in the instruction decoder"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Fix memory leak in decode_instructions()

Pull networking fixes from David Miller:
 "A little more than usual this time around. Been travelling, so that is
  part of it.

  Anyways, here are the highlights:

   1) Deal with memcontrol races wrt. listener dismantle, from Eric
      Dumazet.

   2) Handle page allocation failures properly in nfp driver, from Jaku
      Kicinski.

   3) Fix memory leaks in macsec, from Sabrina Dubroca.

   4) Fix crashes in pppol2tp_session_ioctl(), from Guillaume Nault.

   5) Several fixes in bnxt_en driver, including preventing potential
      NVRAM parameter corruption from Michael Chan.

   6) Fix for KRACK attacks in wireless, from Johannes Berg.

   7) rtnetlink event generation fixes from Xin Long.

   8) Deadlock in mlxsw driver, from Ido Schimmel.

   9) Disallow arithmetic operations on context pointers in bpf, from
      Jakub Kicinski.

  10) Missing sock_owned_by_user() check in sctp_icmp_redirect(), from
      Xin Long.

  11) Only TCP is supported for sockmap, make that explicit with a
      check, from John Fastabend.

  12) Fix IP options state races in DCCP and TCP, from Eric Dumazet.

  13) Fix panic in packet_getsockopt(), also from Eric Dumazet.

  14) Add missing locked in hv_sock layer, from Dexuan Cui.

  15) Various aquantia bug fixes, including several statistics handling
      cures. From Igor Russkikh et al.

  16) Fix arithmetic overflow in devmap code, from John Fastabend.

  17) Fix busted socket memory accounting when we get a fault in the tcp
      zero copy paths. From Willem de Bruijn.

  18) Don't leave opt->tot_len uninitialized in ipv6, from Eric Dumazet"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits)
  stmmac: Don't access tx_q->dirty_tx before netif_tx_lock
  ipv6: flowlabel: do not leave opt->tot_len with garbage
  of_mdio: Fix broken PHY IRQ in case of probe deferral
  textsearch: fix typos in library helpers
  rxrpc: Don't release call mutex on error pointer
  net: stmmac: Prevent infinite loop in get_rx_timestamp_status()
  net: stmmac: Fix stmmac_get_rx_hwtstamp()
  net: stmmac: Add missing call to dev_kfree_skb()
  mlxsw: spectrum_router: Configure TIGCR on init
  mlxsw: reg: Add Tunneling IPinIP General Configuration Register
  net: ethtool: remove error check for legacy setting transceiver type
  soreuseport: fix initialization race
  net: bridge: fix returning of vlan range op errors
  sock: correct sk_wmem_queued accounting on efault in tcp zerocopy
  bpf: add test cases to bpf selftests to cover all access tests
  bpf: fix pattern matches for direct packet access
  bpf: fix off by one for range markings with L{T, E} patterns
  bpf: devmap fix arithmetic overflow in bitmap_size calculation
  net: aquantia: Bad udp rate on default interrupt coalescing
  net: aquantia: Enable coalescing management via ethtool interface
  ...

This is the possible reason for different hard to reproduce
problems on my ARMv7-SMP test system.

The symptoms are in recent kernels imprecise external aborts,
and in older kernels various kinds of network stalls and
unexpected page allocation failures.

My testing indicates that the trouble started between v4.5 and v4.6
and prevails up to v4.14.

Using the dirty_tx before acquiring the spin lock is clearly
wrong and was first introduced with v4.6.

Fixes: e3ad57c9 ("stmmac: review RX/TX ring management")
Signed-off-by: NBernd Edlinger <bernd.edlinger@hotmail.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When syzkaller team brought us a C repro for the crash [1] that
had been reported many times in the past, I finally could find
the root cause.

If FlowLabel info is merged by fl6_merge_options(), we leave
part of the opt_space storage provided by udp/raw/l2tp with random value
in opt_space.tot_len, unless a control message was provided at sendmsg()
time.

Then ip6_setup_cork() would use this random value to perform a kzalloc()
call. Undefined behavior and crashes.

Fix is to properly set tot_len in fl6_merge_options()

At the same time, we can also avoid consuming memory and cpu cycles
to clear it, if every option is copied via a kmemdup(). This is the
change in ip6_setup_cork().

[1]
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
   (ftrace buffer empty)
Modules linked in:
CPU: 0 PID: 6613 Comm: syz-executor0 Not tainted 4.14.0-rc4+ #127
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
task: ffff8801cb64a100 task.stack: ffff8801cc350000
RIP: 0010:ip6_setup_cork+0x274/0x15c0 net/ipv6/ip6_output.c:1168
RSP: 0018:ffff8801cc357550 EFLAGS: 00010203
RAX: dffffc0000000000 RBX: ffff8801cc357748 RCX: 0000000000000010
RDX: 0000000000000002 RSI: ffffffff842bd1d9 RDI: 0000000000000014
RBP: ffff8801cc357620 R08: ffff8801cb17f380 R09: ffff8801cc357b10
R10: ffff8801cb64a100 R11: 0000000000000000 R12: ffff8801cc357ab0
R13: ffff8801cc357b10 R14: 0000000000000000 R15: ffff8801c3bbf0c0
FS:  00007f9c5c459700(0000) GS:ffff8801db200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020324000 CR3: 00000001d1cf2000 CR4: 00000000001406f0
DR0: 0000000020001010 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600
Call Trace:
 ip6_make_skb+0x282/0x530 net/ipv6/ip6_output.c:1729
 udpv6_sendmsg+0x2769/0x3380 net/ipv6/udp.c:1340
 inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:762
 sock_sendmsg_nosec net/socket.c:633 [inline]
 sock_sendmsg+0xca/0x110 net/socket.c:643
 SYSC_sendto+0x358/0x5a0 net/socket.c:1750
 SyS_sendto+0x40/0x50 net/socket.c:1718
 entry_SYSCALL_64_fastpath+0x1f/0xbe
RIP: 0033:0x4520a9
RSP: 002b:00007f9c5c458c08 EFLAGS: 00000216 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000718000 RCX: 00000000004520a9
RDX: 0000000000000001 RSI: 0000000020fd1000 RDI: 0000000000000016
RBP: 0000000000000086 R08: 0000000020e0afe4 R09: 000000000000001c
R10: 0000000000000000 R11: 0000000000000216 R12: 00000000004bb1ee
R13: 00000000ffffffff R14: 0000000000000016 R15: 0000000000000029
Code: e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 ea 0f 00 00 48 8d 79 04 48 b8 00 00 00 00 00 fc ff df 45 8b 74 24 04 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85
RIP: ip6_setup_cork+0x274/0x15c0 net/ipv6/ip6_output.c:1168 RSP: ffff8801cc357550
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If an Ethernet PHY is initialized before the interrupt controller it is
connected to, a message like the following is printed:

    irq: no irq domain found for /interrupt-controller@e61c0000 !

However, the actual error is ignored, leading to a non-functional (POLL)
PHY interrupt later:

    Micrel KSZ8041RNLI ee700000.ethernet-ffffffff:01: attached PHY driver [Micrel KSZ8041RNLI] (mii_bus:phy_addr=ee700000.ethernet-ffffffff:01, irq=POLL)

Depending on whether the PHY driver will fall back to polling, Ethernet
may or may not work.

To fix this:
  1. Switch of_mdiobus_register_phy() from irq_of_parse_and_map() to
     of_irq_get().
     Unlike the former, the latter returns -EPROBE_DEFER if the
     interrupt controller is not yet available, so this condition can be
     detected.
     Other errors are handled the same as before, i.e. use the passed
     mdio->irq[addr] as interrupt.
  2. Propagate and handle errors from of_mdiobus_register_phy() and
     of_mdiobus_register_device().
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix spellos (typos) in textsearch library helpers.
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Don't release call mutex at the end of rxrpc_kernel_begin_call() if the
call pointer actually holds an error value.

Fixes: 540b1c48 ("rxrpc: Fix deadlock between call creation and sendmsg/recvmsg")
Reported-by: NMarc Dionne <marc.dionne@auristor.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jose Abreu says:

====================
net: stmmac: Fix HW timestamping

Three fixes for HW timestamping feature, all of them for RX side.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Prevent infinite loop by correctly setting the loop condition to
break when i == 10.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When using GMAC4 the valid timestamp is from CTX next desc but
we are passing the previous desc to get_rx_timestamp_status()
callback.

Fix this and while at it rework a little bit the function logic.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When RX HW timestamp is enabled and a frame is discarded we are
not freeing the skb but instead only setting to NULL the entry.

Add a call to dev_kfree_skb_any() so that skb entry is correctly
freed.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull input fixes from Dmitry Torokhov:

 - joydev now implements a blacklist to avoid creating joystick nodes
   for accelerometers found in composite devices such as PlaStation
   controllers

 - assorted driver fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: ims-psu - check if CDC union descriptor is sane
  Input: joydev - blacklist ds3/ds4/udraw motion sensors
  Input: allow matching device IDs on property bits
  Input: factor out and export input_device_id matching code
  Input: goodix - poll the 'buffer status' bit before reading data
  Input: axp20x-pek - fix module not auto-loading for axp221 pek
  Input: tca8418 - enable interrupt after it has been requested
  Input: stmfts - fix setting ABS_MT_POSITION_* maximum size
  Input: ti_am335x_tsc - fix incorrect step config for 5 wire touchscreen
  Input: synaptics - disable kernel tracking on SMBus devices

Pull vfs fixes from Al Viro:
 "MS_I_VERSION fixes - Mimi's fix + missing bits picked from Matthew
  (his patch contained a duplicate of the fs/namespace.c fix as well,
  but by that point the original fix had already been applied)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  Convert fs/*/* to SB_I_VERSION
  vfs: fix mounting a filesystem with i_version

Jiri Pirko says:

====================
mlxsw: spectrum: Configure TTL of "inherit" for offloaded tunnels

Petr says:

Currently mlxsw only offloads tunnels that are configured with TTL of "inherit"
(which is the default). However, Spectrum defaults to 255 and the driver
neglects to change the configuration. Thus the tunnel packets from offloaded
tunnels always have TTL of 255, even though tunnels with explicit TTL of 255 are
never actually offloaded.

To fix this, introduce support for TIGCR, the register that keeps the related
bits of global tunnel configuration, and use it on first offload to properly
configure inheritance of TTL of tunnel packets from overlay packets.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Spectrum tunnels do not default to ttl of "inherit" like the Linux ones
do. Configure TIGCR on router init so that the TTL of tunnel packets is
copied from the overlay packets.

Fixes: ee954d1a ("mlxsw: spectrum_router: Support GRE tunnels")
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The TIGCR register is used for setting up the IPinIP Tunnel
configuration.

Fixes: ee954d1a ("mlxsw: spectrum_router: Support GRE tunnels")
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 9cab88726929605 ("net: ethtool: Add back transceiver type")
restores the transceiver type to struct ethtool_link_settings and
convert_link_ksettings_to_legacy_settings() but forgets to remove the
error check for the same in convert_legacy_settings_to_link_ksettings().
This prevents older versions of ethtool to change link settings.

    # ethtool --version
    ethtool version 3.16

    # ethtool -s eth0 autoneg on speed 100 duplex full
    Cannot set new settings: Invalid argument
      not setting speed
      not setting duplex
      not setting autoneg

While newer versions of ethtool works.

    # ethtool --version
    ethtool version 4.10

    # ethtool -s eth0 autoneg on speed 100 duplex full
    [   57.703268] sh-eth ee700000.ethernet eth0: Link is Down
    [   59.618227] sh-eth ee700000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx

Fixes: 19cab887 ("net: ethtool: Add back transceiver type")
Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reported-by: NRenjith R V <renjith.rv@quest-global.com>
Tested-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Syzkaller stumbled upon a way to trigger
WARNING: CPU: 1 PID: 13881 at net/core/sock_reuseport.c:41
reuseport_alloc+0x306/0x3b0 net/core/sock_reuseport.c:39

There are two initialization paths for the sock_reuseport structure in a
socket: Through the udp/tcp bind paths of SO_REUSEPORT sockets or through
SO_ATTACH_REUSEPORT_[CE]BPF before bind.  The existing implementation
assumedthat the socket lock protected both of these paths when it actually
only protects the SO_ATTACH_REUSEPORT path.  Syzkaller triggered this
double allocation by running these paths concurrently.

This patch moves the check for double allocation into the reuseport_alloc
function which is protected by a global spin lock.

Fixes: e32ea7e7 ("soreuseport: fast reuseport UDP socket selection")
Fixes: c125e80b ("soreuseport: fast reuseport TCP socket selection")
Signed-off-by: NCraig Gallek <kraig@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When vlan tunnels were introduced, vlan range errors got silently
dropped and instead 0 was returned always. Restore the previous
behaviour and return errors to user-space.

Fixes: efa5356b ("bridge: per vlan dst_metadata netlink support")
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: NRoopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Syzkaller hits WARN_ON(sk->sk_wmem_queued) in sk_stream_kill_queues
after triggering an EFAULT in __zerocopy_sg_from_iter.

On this error, skb_zerocopy_stream_iter resets the skb to its state
before the operation with __pskb_trim. It cannot kfree_skb like
datagram callers, as the skb may have data from a previous send call.

__pskb_trim calls skb_condense for unowned skbs, which adjusts their
truesize. These tcp skbuffs are owned and their truesize must add up
to sk_wmem_queued. But they match because their skb->sk is NULL until
tcp_transmit_skb.

Temporarily set skb->sk when calling __pskb_trim to signal that the
skbuffs are owned and avoid the skb_condense path.

Fixes: 52267790 ("sock: add MSG_ZEROCOPY")
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
Two BPF fixes for range marking

The set contains two fixes for direct packet access range
markings and test cases for all direct packet access patterns
that the verifier matches on.

They are targeted for net tree, note that once net gets merged
into net-next, there will be a minor merge conflict due to
signature change of the function find_good_pkt_pointers() as
well as data_meta patterns present in net-next tree. You can
just add bool false to the data_meta patterns and I will
follow-up with properly converting the patterns for data_meta
in a similar way.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Lets add test cases to cover really all possible direct packet
access tests for good/bad access cases so we keep tracking them.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Alexander had a test program with direct packet access, where
the access test was in the form of data + X > data_end. In an
unrelated change to the program LLVM decided to swap the branches
and emitted code for the test in form of data + X <= data_end.
We hadn't seen these being generated previously, thus verifier
would reject the program. Therefore, fix up the verifier to
detect all test cases, so we don't run into such issues in the
future.

Fixes: b4e432f1 ("bpf: enable BPF_J{LT, LE, SLT, SLE} opcodes in verifier")
Reported-by: NAlexander Alemayhu <alexander@alemayhu.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

During review I noticed that the current logic for direct packet
access marking in check_cond_jmp_op() has an off by one for the
upper right range border when marking in find_good_pkt_pointers()
with BPF_JLT and BPF_JLE. It's not really harmful given access
up to pkt_end is always safe, but we should nevertheless correct
the range marking before it becomes ABI. If pkt_data' denotes a
pkt_data derived pointer (pkt_data + X), then for pkt_data' < pkt_end
in the true branch as well as for pkt_end <= pkt_data' in the false
branch we mark the range with X although it should really be X - 1
in these cases. For example, X could be pkt_end - pkt_data, then
when testing for pkt_data' < pkt_end the verifier simulation cannot
deduce that a byte load of pkt_data' - 1 would succeed in this
branch.

Fixes: b4e432f1 ("bpf: enable BPF_J{LT, LE, SLT, SLE} opcodes in verifier")
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

An integer overflow is possible in dev_map_bitmap_size() when
calculating the BITS_TO_LONG logic which becomes, after macro
replacement,

	(((n) + (d) - 1)/ (d))

where 'n' is a __u32 and 'd' is (8 * sizeof(long)). To avoid
overflow cast to u64 before arithmetic.
Reported-by: NRichard Weinberger <richard@nod.at>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull dmaengine fix from Vinod Koul:
 "Late fix for altera driver which fixes the locking in driver"

* tag 'dmaengine-fix-4.14-rc6' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: altera: Use IRQ-safe spinlock calls in the error paths as well

Igor Russkikh says:

====================
net: aquantia: Atlantic driver 10/2017 updates

This patchset fixes various issues in driver,
improves parameters for better performance on 10Gbit link
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Default Tx rates cause very long ISR delays on Tx.
0xff is 510us delay, giving only ~ 2000 interrupts per seconds for
Tx rings cleanup. With these settings udp tx rate was never higher than
~800Mbps on a single stream. Changing min delay to 0xF makes it
way better with ~6Gbps

TCP stream performance is almost unaffected by this change, since LSO
optimizations play important role.

CPU load is affected insignificantly by this change.
Signed-off-by: NPavel Belous <pavel.belous@aquantia.com>
Signed-off-by: NIgor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Aquantia NIC allows both TX and RX interrupt throttle rate (ITR)
management, but this was used in a very limited way via predefined
values. This patch allows to setup ITR default values via module
command line arguments and via standard ethtool coalescing settings.
Signed-off-by: NPavel Belous <pavel.belous@aquantia.com>
Signed-off-by: NIgor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

That may lead to mmio resource leakage.
Signed-off-by: NPavel Belous <pavel.belous@aquantia.com>
Signed-off-by: NIgor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no much practical use from having MSIX vectors more that number
of cpus, thus cap this first with preconfigured limit, then with number
of cpus online.
Signed-off-by: NPavel Belous <pavel.belous@aquantia.com>
Signed-off-by: NIgor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When doing ifconfig down/up, driver did not reported carrier_off neither
in nic_stop nor in nic_start. That caused link to be visible as "up"
during couple of seconds immediately after "ifconfig up".
Signed-off-by: NPavel Belous <pavel.belous@aquantia.com>
Signed-off-by: NIgor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Queue stat strings are cleaned up, duplicate stat name strings removed,
queue restarts counter added
Signed-off-by: NPavel Belous <pavel.belous@aquantia.com>
Signed-off-by: NIgor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Internal statistics system on chip never gets reset until hardware
reboot. This is quite inconvenient in terms of ethtool statistics usage.

This patch implements incremental statistics update inside of
service callback.

Upon nic initialization, first request is done to fetch
initial stat data, current collected stat data gets cleared.
Internal statistics mailbox readout is improved to save space and
increase readability
Signed-off-by: NPavel Belous <pavel.belous@aquantia.com>
Signed-off-by: NIgor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the UDP code there are two leftover error messages with very few meaning.
Replace them with a more descriptive error message as some users
reported them as "strange network error".
Signed-off-by: NMatteo Croce <mcroce@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On big-endian machines, functions converting between tunnel ID
and VNI use the three LSBs of tunnel ID storage to map VNI.

The comparison function eq_tun_id_and_vni(), on the other hand,
attempted to map the VNI from the three MSBs. Fix it by using
the same check implemented on LE, which maps VNI from the three
LSBs of tunnel ID.

Fixes: 2e0b26e1 ("geneve: Optimize geneve device lookup.")
Signed-off-by: NStefano Brivio <sbrivio@redhat.com>
Reviewed-by: NJakub Sitnicki <jkbs@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'linux-can-fixes-for-4.14-20171019' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2017-10-19

this is a pull request of 11 patches for the upcoming 4.14 release.

There are 6 patches by ZHU Yi for the flexcan driver, that work around
the CAN error handling state transition problems found in various
incarnations of the flexcan IP core.

The patch by Colin Ian King fixes a potential NULL pointer deref in the
CAN broad cast manager (bcm). One patch by me replaces a direct deref of a RCU
protected pointer by rcu_access_pointer. My second patch adds missing
OOM error handling in af_can. A patch by Stefan Mätje for the esd_usb2
driver fixes the dlc in received RTR frames. And the last patch is by
Wolfgang Grandegger, it fixes a busy loop in the gs_usb driver in case
it runs out of TX contexts.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Without the patch, when hvs_open_connection() hasn't completely established
a connection (e.g. it has changed sk->sk_state to SS_CONNECTED, but hasn't
inserted the sock into the connected queue), vsock_stream_connect() may see
the sk_state change and return the connection to the userspace, and next
when the userspace closes the connection quickly, hvs_release() may not see
the connection in the connected queue; finally hvs_open_connection()
inserts the connection into the queue, but we won't be able to purge the
connection for ever.
Signed-off-by: NDexuan Cui <decui@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Cathy Avery <cavery@redhat.com>
Cc: Rolf Neugebauer <rolf.neugebauer@docker.com>
Cc: Marcelo Cerri <marcelo.cerri@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The length of GVI (GetVersionInfo) response packet should be 40 instead
of 36. This issue was found from /sys/kernel/debug/ncsi/eth0/stats.

 # ethtool --ncsi eth0 swstats
     :
 RESPONSE     OK       TIMEOUT  ERROR
 =======================================
 GVI          0        0        2

With this applied, no error reported on GVI response packets:

 # ethtool --ncsi eth0 swstats
     :
 RESPONSE     OK       TIMEOUT  ERROR
 =======================================
 GVI          2        0        0
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NSamuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The NCSI channel has been configured to provide service if its link
monitor timer is enabled, regardless of its state (inactive or active).
So the timeout event on the link monitor indicates the out-of-service
on that channel, for which a failover is needed.

This sets NCSI_DEV_RESHUFFLE flag to enforce failover on link monitor
timeout, regardless the channel's original state (inactive or active).
Also, the link is put into "down" state to give the failing channel
lowest priority when selecting for the active channel. The state of
failing channel should be set to active in order for deinitialization
and failover to be done.
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NSamuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>