This patch adds support for a drm overlay plane on DI0 using the DP.
In principle, the overlay plane could also be used on DI1, but to switch
the overlay plane between display interfaces, the base planes would have
to be exchanged transparently while both display interfaces are inactive.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

During a device close the drm core frees all pending events in
drm_events_release(). If at that time a pageflip is pending the
interrupt handler will try to complete the now unitialized
event resulting in a NULL pointer exception. Seen on imx-drm
when userspace is killed during a page flip.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently we wait for a channel until it's idle before actually
disabling it. This is not needed for all channels though, so make
waiting for idle a separate function and call it where necessary.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The drm fourccs define formats not available as video4linux pixel formats,
such as DRM_FORMAT_BGR565, or the DRM_FORMAT_RGBX/BGRX variants.
Also, contrary to the v4l2 formats, the drm formats are well defined.

This patch also fixes the BGRA32 and RGB/RGB24 internal formats to use a
common internal representation.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Connecting a 320x240 parallel display on i.MX6 resulted in an invalid DRDY
signal because the DC would not receive NL/EOL events on every line.
Reducing the allocated DMFC space from 4 slots (256 * 128-bit) to 2 slots
(128 * 128-bit) solved the problem.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Booting a mx6 with CONFIG_PROVE_LOCKING we get:

======================================================
[ INFO: possible circular locking dependency detected ]
3.12.0-rc4-next-20131009+ #34 Not tainted
-------------------------------------------------------
swapper/0/1 is trying to acquire lock:
 (&imx_drm_device->mutex){+.+.+.}, at: [<804575a8>] imx_drm_encoder_get_mux_id+0x28/0x98

but task is already holding lock:
 (&crtc->mutex){+.+...}, at: [<802fe778>] drm_modeset_lock_all+0x40/0x54

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #2 (&crtc->mutex){+.+...}:
       [<800777d0>] __lock_acquire+0x18d4/0x1c24
       [<80077fec>] lock_acquire+0x68/0x7c
       [<805ead5c>] _mutex_lock_nest_lock+0x58/0x3a8
       [<802fec50>] drm_crtc_init+0x48/0xa8
       [<80457c88>] imx_drm_add_crtc+0xd4/0x144
       [<8045e2e8>] ipu_drm_probe+0x114/0x1fc
       [<80312278>] platform_drv_probe+0x20/0x50
       [<80310c68>] driver_probe_device+0x110/0x22c
       [<80310e20>] __driver_attach+0x9c/0xa0
       [<8030f218>] bus_for_each_dev+0x5c/0x90
       [<80310750>] driver_attach+0x20/0x28
       [<8031034c>] bus_add_driver+0xdc/0x1dc
       [<803114d8>] driver_register+0x80/0xfc
       [<80312198>] __platform_driver_register+0x50/0x64
       [<808172fc>] ipu_drm_driver_init+0x18/0x20
       [<800088c0>] do_one_initcall+0xfc/0x160
       [<807e7c5c>] kernel_init_freeable+0x104/0x1d4
       [<805e2930>] kernel_init+0x10/0xec
       [<8000ea68>] ret_from_fork+0x14/0x2c

-> #1 (&dev->mode_config.mutex){+.+.+.}:
       [<800777d0>] __lock_acquire+0x18d4/0x1c24
       [<80077fec>] lock_acquire+0x68/0x7c
       [<805eb100>] mutex_lock_nested+0x54/0x3a4
       [<802fe758>] drm_modeset_lock_all+0x20/0x54
       [<802fead4>] drm_encoder_init+0x20/0x7c
       [<80457ae4>] imx_drm_add_encoder+0x88/0xec
       [<80459838>] imx_ldb_probe+0x344/0x4fc
       [<80312278>] platform_drv_probe+0x20/0x50
       [<80310c68>] driver_probe_device+0x110/0x22c
       [<80310e20>] __driver_attach+0x9c/0xa0
       [<8030f218>] bus_for_each_dev+0x5c/0x90
       [<80310750>] driver_attach+0x20/0x28
       [<8031034c>] bus_add_driver+0xdc/0x1dc
       [<803114d8>] driver_register+0x80/0xfc
       [<80312198>] __platform_driver_register+0x50/0x64
       [<8081722c>] imx_ldb_driver_init+0x18/0x20
       [<800088c0>] do_one_initcall+0xfc/0x160
       [<807e7c5c>] kernel_init_freeable+0x104/0x1d4
       [<805e2930>] kernel_init+0x10/0xec
       [<8000ea68>] ret_from_fork+0x14/0x2c

-> #0 (&imx_drm_device->mutex){+.+.+.}:
       [<805e510c>] print_circular_bug+0x74/0x2e0
       [<80077ad0>] __lock_acquire+0x1bd4/0x1c24
       [<80077fec>] lock_acquire+0x68/0x7c
       [<805eb100>] mutex_lock_nested+0x54/0x3a4
       [<804575a8>] imx_drm_encoder_get_mux_id+0x28/0x98
       [<80459a98>] imx_ldb_encoder_prepare+0x34/0x114
       [<802ef724>] drm_crtc_helper_set_mode+0x1f0/0x4c0
       [<802f0344>] drm_crtc_helper_set_config+0x828/0x99c
       [<802ff270>] drm_mode_set_config_internal+0x5c/0xdc
       [<802eebe0>] drm_fb_helper_set_par+0x50/0xb4
       [<802af580>] fbcon_init+0x490/0x500
       [<802dd104>] visual_init+0xa8/0xf8
       [<802df414>] do_bind_con_driver+0x140/0x37c
       [<802df764>] do_take_over_console+0x114/0x1c4
       [<802af65c>] do_fbcon_takeover+0x6c/0xd4
       [<802b2b30>] fbcon_event_notify+0x7c8/0x818
       [<80049954>] notifier_call_chain+0x4c/0x8c
       [<80049cd8>] __blocking_notifier_call_chain+0x50/0x68
       [<80049d10>] blocking_notifier_call_chain+0x20/0x28
       [<802a75f0>] fb_notifier_call_chain+0x1c/0x24
       [<802a9224>] register_framebuffer+0x188/0x268
       [<802ee994>] drm_fb_helper_initial_config+0x2bc/0x4b8
       [<802f118c>] drm_fbdev_cma_init+0x7c/0xec
       [<80817288>] imx_fb_helper_init+0x54/0x90
       [<800088c0>] do_one_initcall+0xfc/0x160
       [<807e7c5c>] kernel_init_freeable+0x104/0x1d4
       [<805e2930>] kernel_init+0x10/0xec
       [<8000ea68>] ret_from_fork+0x14/0x2c

other info that might help us debug this:

Chain exists of:
  &imx_drm_device->mutex --> &dev->mode_config.mutex --> &crtc->mutex

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&crtc->mutex);
                               lock(&dev->mode_config.mutex);
                               lock(&crtc->mutex);
  lock(&imx_drm_device->mutex);

 *** DEADLOCK ***

6 locks held by swapper/0/1:
 #0:  (registration_lock){+.+.+.}, at: [<802a90bc>] register_framebuffer+0x20/0x268
 #1:  (&fb_info->lock){+.+.+.}, at: [<802a7a90>] lock_fb_info+0x20/0x44
 #2:  (console_lock){+.+.+.}, at: [<802a9218>] register_framebuffer+0x17c/0x268
 #3:  ((fb_notifier_list).rwsem){.+.+.+}, at: [<80049cbc>] __blocking_notifier_call_chain+0x34/0x68
 #4:  (&dev->mode_config.mutex){+.+.+.}, at: [<802fe758>] drm_modeset_lock_all+0x20/0x54
 #5:  (&crtc->mutex){+.+...}, at: [<802fe778>] drm_modeset_lock_all+0x40/0x54

In order to avoid this lockdep warning, remove the locking from
imx_drm_encoder_get_mux_id() and imx_drm_crtc_panel_format_pins().

Tested on a mx6sabrelite and mx53qsb.
Reported-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Tested-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

There is no need remove and add the control urb in device open/close.

Move to the probe and disconnect. This make the USB control in/out
functions always available to driver.
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

module_spi_driver removes the boilerplate code and simplifies it.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Cc: Henry Pan <hspan@micron.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

module_platform_driver simplifies the code by removing the boilerplate.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

init_usb() may fail after some of mux_rxes already allocated.
So we need to release them on the failure path.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

As far as alloc_mux_rx() is called from probe() only
there is no need in GFP_ATOMIC here.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds a MMU dependency to configure the ZSMALLOC in
drivers/staging/zsmalloc/Kconfig. Without this patch, build
system can lead to build failure. This was observed during
randconfig testing, in which ZSMALLOC was enabled w/o MMU being
enabled. Following was the error:

LD      vmlinux
drivers/built-in.o: In function `__zs_map_object':
drivers/staging/zsmalloc/zsmalloc-main.c:650: undefined reference to `map_vm_area'
make: *** [vmlinux] Error 1
Signed-off-by: NManjunath Goudar <csmanjuvijay@gmail.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Seth Jennings <sjenning@linux.vnet.ibm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: devel@driverdev.osuosl.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch.pl issues with line over 80 characters
in sm7xxfb.c
Signed-off-by: NEbru Akagunduz <ebru.akagunduz@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch.pl issues with line over 80
characters in ethernet-tx.c
Signed-off-by: NEbru Akagunduz <ebru.akagunduz@gmail.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch.pl issues with quoted string split
across lines in ethernet-tx.c
Signed-off-by: NEbru Akagunduz <ebru.akagunduz@gmail.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch.pl issues with quoted string split
across lines in ethernet-spi.c
Signed-off-by: NEbru Akagunduz <ebru.akagunduz@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch.pl issues with suspect code indent for
conditional statements in r8185b_init.c
Signed-off-by: NEbru Akagunduz <ebru.akagunduz@gmail.com>
Reviewed-by: NZach Brown <zab@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch.pl issues with avoid unnecessary line
continuations in r8185b_init.c
Signed-off-by: NEbru Akagunduz <ebru.akagunduz@gmail.com>
Reviewed-by: NZach Brown <zab@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This fixes the following sparse warnings:
* drivers/staging/rtl8188eu/core/rtw_cmd.c:221:5: warning:
symbol 'rtw_cmd_filter' was not declared. Should it be static?
* drivers/staging/rtl8188eu/core/rtw_cmd.c:1670:6: warning:
symbol 'dynamic_chk_wk_hdl' was not declared. Should it be static?
Signed-off-by: NValentina Manea <valentina.manea.m@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch.pl warning on quoted string on multiple lines in
go7007-usb.c
Signed-off-by: NDulshani Gunawardhana <dulshani.gunawardhana89@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix "line over 80 characters" warning generated by checkpatch.pl for
go7007-usb.c
Signed-off-by: NDulshani Gunawardhana <dulshani.gunawardhana89@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace KERN_INFO with pr_info in go7007-usb.c
Signed-off-by: NDulshani Gunawardhana <dulshani.gunawardhana89@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace KERN_ERR with pr_err in go7007-usb.c
Signed-off-by: NDulshani Gunawardhana <dulshani.gunawardhana89@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove driver-specific debugging defines in favor of pr_debug in
go7007-usb.c
Signed-off-by: NDulshani Gunawardhana <dulshani.gunawardhana89@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

fix checkpatch.pl issues with return is not a function,
parentheses are not required in lo.c
Signed-off-by: NEbru Akagunduz <ebru.akagunduz@gmail.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch.pl issues with space prohibited between
function name and open parenthesis '(' in lo.c
Signed-off-by: NEbru Akagunduz <ebru.akagunduz@gmail.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch.pl issues with space prohibited between
function name and open parenthesis '(' in module.c
Signed-off-by: NEbru Akagunduz <ebru.akagunduz@gmail.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch.pl issues with do not initialise statics to 0 or NULL in module.c
Signed-off-by: NEbru Akagunduz <ebru.akagunduz@gmail.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch.pl issues with quoted string split across lines in lirc_imon.c
Signed-off-by: NArchana kumari <archanakumari959@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix sparse warnings for static functions
* drivers/staging/wlan-ng/cfg80211.c:101:5: warning:
symbol 'prism2_change_virtual_intf' was not declared.
Signed-off-by: NTeodora Baluta <teobaluta@gmail.com>
Signed-off-by: NZach Brown <zab@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch.pl issues with prefer netdev_dbg(netdev, .. then
dev_dbg(dev, .. then pr_debug(.. to printk(KERN_DEBUG in p80211wep.c
Signed-off-by: NEbru Akagunduz <ebru.akagunduz@gmail.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch.pl issues with sizeof *ring should be sizeof(*ring)
in sca3000_ring.c
Signed-off-by: NEbru Akagunduz <ebru.akagunduz@gmail.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the following checkpatch.pl warning in btmtk_usb.c:
WARNING: line over 80 characters in the file
by using kernel built_in min_t macro.
Signed-off-by: NRashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Reviewed-by: NZach Brown <zab@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The patch fixes the following checkpatch.pl warning in btmtk_usb.c
WARNING: suspect code indent for conditional statements
Signed-off-by: NRashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The patch fixes the following checkpatch.pl warning in btmtk_usb.c
WARNING: unnecessary whitespace before a quoted newline
Signed-off-by: NRashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Reviewed-by: NZach Brown <zab@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>