If the reg property is missing from the phy node (unlikely, but possible),
then the kernel will oops with a NULL pointer dereference.  This fixes
it by checking the pointer first.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The global primary_ipic in arch/powerpc/sysdev/ipic.c can remain NULL
if ipic_init() fails, which will happen on machines that don't have an
ipic interrupt controller.  init_ipic_sysfs() will crash in that case.
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

On pSeries, the hypervisor doesn't let us map in the eHEA ethernet
adapter using 64k pages, and thus the ehea driver will fail if 64k
pages are configured.  This works around the problem by always
using 4k pages for ioremap on pSeries (but not on other platforms).
A better fix would be to check whether the partition could ever
have an eHEA adapter, and only force 4k pages if it could, but this
will do for 2.6.25.

This is based on an earlier patch by Tony Breeds.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  RDMA/nes: Fix MSS calculation on RDMA path

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  Revert "ide-tape: schedule driver for removal after 6 months"
  ide: mark "hdx=remap" and "hdx=remap63" kernel parameters as obsoleted
  ide: mark "hdx=[driver_name]" and "hdx=scsi" kernel parameters as obsoleted
  ide: Documentation/ide/ide.txt fixes
  ide: mark special "ide0=" kernel parameters as obsoleted
  ide: remove commented out entries from ide_pio_blacklist[]

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] Fix mem leak on dfs referral
  [CIFS] file create with acl support enabled is slow
  [CIFS] Fix mtime on cp -p when file data cached but written out too late
  [CIFS] Fix build problem
  [CIFS] cifs: replace remaining __FUNCTION__ occurrences
  [CIFS]  DFS patch that connects inode with dfs handling ops

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86:
  x86: revert: reserve dma32 early for gart

Change pagemap output format to allow for future reporting of huge pages.

(Format comment and minor cleanups: mpm@selenic.com)
Signed-off-by: NHans Rosenfeld <hans.rosenfeld@amd.com>
Signed-off-by: NMatt Mackall <mpm@selenic.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Suppressing uevents turned out to be a bad idea as it screws up the
order of events, making user space very confused. Change the system to
use sysfs groups instead.

This is a regression that, for some odd reason, has gone unnoticed for
some time. It confuses hal so that the block devices (which have the
mmc device as a parent) are not registered. End result being that
desktop magic when cards are inserted won't work.
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Increase the number of PnP memory resources from 12 to 24.

This removes an "exceeded the max num of mem resources" warning on boot. I
also noticed the reservation of two more iomem ranges on the computer on
which this was tested.
Signed-off-by: NDarren Salt <linux@youmustbejoking.demon.co.uk>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

PNP_MAX_MEM and PNP_MAX_PORT are mainly used to size tables of PNP
device resources.  In 2.6.24, we increased their values to accomodate
ACPI devices that have many resources:

                 2.6.23    2.6.24
                 ------    ------
  PNP_MAX_MEM       4         12
  PNP_MAX_PORT      8         40

However, ISAPNP also used these constants as the size of parts of the
logical device register set.  This register set is fixed by hardware,
so increasing the constants meant that we were reading and writing
unintended parts of the register set.

This patch changes ISAPNP to use the correct register set sizes (the
same values we used prior to 2.6.24).
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NIgor Mammedov <niallain@gmail.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Revert

commit f62f1fc9
Author: Yinghai Lu <yhlu.kernel@gmail.com>
Date:   Fri Mar 7 15:02:50 2008 -0800

    x86: reserve dma32 early for gart

The patch has a dependency on bootmem modifications which are not .25
material that late in the -rc cycle. The problem which is addressed by
the patch is limited to machines with 256G and more memory booted with
NUMA disabled. This is not a .25 regression and the audience which is
affected by this problem is very limited, so it's safer to do the
revert than pulling in intrusive bootmem changes right now.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This reverts commit d48567dd.

Borislav is working on ide-tape "light" version instead.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Mark "hdx=remap" and "hdx=remap63" kernel parameters as obsoleted
(they are layering violation and should be dealt with in the same
 way as done by libata - device-mapper should be used instead).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Mark "hdx=[driver_name]" and "hdx=scsi" kernel parameters as obsoleted
(nowadays device-driver binding can be changed at runtime through sysfs
 and it can also be dealt with using per device driver parameters).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* "hdx=cyls,heads,sects,wpcom,irq" should be "hdx=cyls,heads,sects".

* "hdx=" is for "x" from 'a' to 'u', "idex=" is for "x" from '0' to '9'.

* "idex=noautotune" is long gone.

* Obsoleted "ide0=" parameters were already removed from the documentation.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Mark "ide0=ali14xx|cmd640_vlb|dtc2278|ht6560b|qd65xx|umc8672" kernel
parameters as obsoleted (per host driver replacements have been available
for a long time).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Fix the calculation of the MSS for RDMA connections: we need to
allow space in frames for a VLAN tag too.
Signed-off-by: NChien Tung <ctung@neteffect.com>
Signed-off-by: NGlenn Streiff <gstreiff@neteffect.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Change my e-mail address, add Joel as new co-maintainer.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched-devel

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched-devel:
  sched: add arch_update_cpu_topology hook.
  sched: add exported arch_reinit_sched_domains() to header file.
  sched: remove double unlikely from schedule()
  sched: cleanup old and rarely used 'debug' features.

so use nodedata_phys directly.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Fix wrong function name and references to non-x86 architectures.

Signed-off-by: Matti Linnanvuori mattilinnanvuori@yahoo.com
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

fix the bug reported here:

	http://bugzilla.kernel.org/show_bug.cgi?id=10232

use update_memory_range() instead of add_memory_range() directly
to avoid closing the gap.

( the new code only affects and runs on systems where the MTRR
  workaround triggers. )
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

we have seen a little problem in rebooting Dell Optiplex 745 with the
0KW626 board. Here is a small patch enabling reboot with this board,
which forces the default reboot path it into the BIOS reboot mode.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The fault_msg text is not explictly nul terminated now in startup
assembly. Do so by converting .ascii to .asciz.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

aperture_64.c takes a piece of memory and makes it into iommu
window... but such window may not be saved by swsusp -- that leads to
oops during hibernation.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Acked-by: N"Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

this patch allows hpet=force on nVidia nForce 430 southbridge.
This patch was tested by me on my old Asus A8N-VM CSM (where bios does not
support hpet and does not advertise it via acpi entry). My nForce430 version:
lspci -nn | grep LPC
00:0a.0 ISA bridge [0601]: nVidia Corporation MCP51 LPC Bridge [10de:0260]
(rev a2)

Kernel 2.6.24.3 after patching and using hpet=force reports this:
dmesg | grep -i hpet
Kernel command line: root=/dev/sda8 ro vga=773 video=vesafb:mtrr:4,ywrap
vt.default_utf8=0 hpet=force
Force enabled HPET at base address 0xfed00000
hpet clockevent registered
Time: hpet clocksource has been installed.

grep -i hpet /proc/timer_list
Clock Event Device: hpet
 set_next_event: hpet_legacy_next_event
 set_mode:       hpet_legacy_set_mode

grep Clock /proc/timer_list (before patching)
Clock Event Device: pit
Clock Event Device: lapic

grep Clock /proc/timer_list (after patching)
Clock Event Device: hpet
Clock Event Device: lapic
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

a system with 256 GB of RAM, when NUMA is disabled crashes the
following way:

Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Cannot allocate aperture memory hole (ffff8101c0000000,65536K)
Kernel panic - not syncing: Not enough memory for aperture
Pid: 0, comm: swapper Not tainted 2.6.25-rc4-x86-latest.git #33

Call Trace:
 [<ffffffff84037c62>] panic+0xb2/0x190
 [<ffffffff840381fc>] ? release_console_sem+0x7c/0x250
 [<ffffffff847b1628>] ? __alloc_bootmem_nopanic+0x48/0x90
 [<ffffffff847b0ac9>] ? free_bootmem+0x29/0x50
 [<ffffffff847ac1f7>] gart_iommu_hole_init+0x5e7/0x680
 [<ffffffff847b255b>] ? alloc_large_system_hash+0x16b/0x310
 [<ffffffff84506a2f>] ? _etext+0x0/0x1
 [<ffffffff847a2e8c>] pci_iommu_alloc+0x1c/0x40
 [<ffffffff847ac795>] mem_init+0x45/0x1a0
 [<ffffffff8479ff35>] start_kernel+0x295/0x380
 [<ffffffff8479f1c2>] _sinittext+0x1c2/0x230

the root cause is : memmap PMD is too big,
[ffffe200e0600000-ffffe200e07fffff] PMD ->ffff81383c000000 on node 0
almost near 4G..., and vmemmap_alloc_block will use up the ram under 4G.

solution will be:
1. make memmap allocation get memory above 4G...
2. reserve some dma32 range early before we try to set up memmap for all.
and release that before pci_iommu_alloc, so gart or swiotlb could get some
range under 4g limit for sure.

the patch is using method 2.
because method1 may need more code to handle SPARSEMEM and SPASEMEM_VMEMMAP

will get
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 4000000
Memory: 264245736k/268959744k available (8484k kernel code, 4187464k reserved, 4004k data, 724k init)
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

We recently got some of the "Desktop Form Factor" Optiplex 745's in.  I
noticed that there's an entry for the SFF one's, but the BIOS model number
of the DFF differs from that of the SFF.  We have been reliably
experiencing the same (as far as I can tell) reboot bug as the SFF boxes.

Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Fix visws printk format warnings:

/local/linsrc/linux-2.6.24-git15/arch/x86/mach-visws/traps.c:50: warning: format '%#lx' expects type 'long unsigned int', but argument 2 has type 'u32'
/local/linsrc/linux-2.6.24-git15/arch/x86/mach-visws/traps.c:50: warning: format '%#lx' expects type 'long unsigned int', but argument 3 has type 'u32'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Clean up: eliminate some compiler noise on x86 when building with strict
warnings enabled, introduced by commit 345b904c.

In file included from include2/asm/thread_info_64.h:12,
                 from include2/asm/thread_info.h:4,
                 from
/home/cel/src/linux/nfs-2.6/include/linux/thread_info.h:35,
                 from
/home/cel/src/linux/nfs-2.6/include/linux/preempt.h:9,
                 from
/home/cel/src/linux/nfs-2.6/include/linux/spinlock.h:49,
                 from /home/cel/src/linux/nfs-2.6/include/linux/mmzone.h:7,
                 from /home/cel/src/linux/nfs-2.6/include/linux/gfp.h:4,
                 from /home/cel/src/linux/nfs-2.6/include/linux/slab.h:14,
                 from /home/cel/src/linux/nfs-2.6/fs/nfsd/nfs4acl.c:40:
include2/asm/page.h:55: warning: `inline' is not at beginning of
declaration
include2/asm/page.h:61: warning: `inline' is not at beginning of
declaration
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

mm/slub.c: In function 'slab_alloc':
mm/slub.c:1637: warning: assignment makes pointer from integer without a cast
mm/slub.c:1637: warning: assignment makes pointer from integer without a cast
mm/slub.c: In function 'slab_free':
mm/slub.c:1796: warning: assignment makes pointer from integer without a cast
mm/slub.c:1796: warning: assignment makes pointer from integer without a cast

A cast is needed in the 386 and 486 code because the type is a pointer.  In
every other integer case the original cmpxchg code (and the cmpxchg_local
which has been copied from it) worked fine, but since we touch a pointer,
the type needs to be casted in the cmpxchg_local and cmpxchg macros.

The more recent code (586+) does not have this problem (the cast is already
there).
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NChristoph Lameter <clameter@sgi.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

when numa disabled I got this compile warning:

arch/x86/kernel/setup64.c: In function setup_per_cpu_areas:
arch/x86/kernel/setup64.c:147: warning: the address of
                      contig_page_data will always evaluate as true

it seems we missed checking if the node is online before we try to refer
NODE_DATA. Fix it.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

memory-less node support:

this patch uses updated dev_to_node, because dev_to_node already makes sure
it returns an online node.
Signed-off-by: NYinghai Lu <yinghai.lu@sun.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Will be called each time the scheduling domains are rebuild.
Needed for architectures that don't have a static cpu topology.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Needed so it can be called from outside of sched.c.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Combine two unlikely's
Signed-off-by: NRoel Kluin <12o3l@tiscali.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

TREE_AVG and APPROX_AVG are initial task placement policies that have been
disabled for a long while.. time to remove them.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
CC: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>