If __blkdev_issue_discard is in progress and a device mapper device is
reloaded with a table that doesn't support discard,
q->limits.max_discard_sectors is set to zero. This results in infinite
loop in __blkdev_issue_discard.

This patch checks if max_discard_sectors is zero and aborts with
-EOPNOTSUPP.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Tested-by: NZdenek Kabelac <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Don't build discards bigger than what the user asked for, if the
user decided to limit the size by writing to 'discard_max_bytes'.
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Similar to blkdev_write_iter(), return -EPERM if the partition is
read-only.  This covers ioctl(), fallocate() and most in-kernel users
but isn't meant to be exhaustive -- everything else will be caught in
generic_make_request_checks(), fail with -EIO and can be fixed later.
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

sd_config_write_same() ignores ->max_ws_blocks == 0 and resets it to
permit trying WRITE SAME on older SCSI devices, unless ->no_write_same
is set.  Because REQ_OP_WRITE_ZEROES is implemented in terms of WRITE
SAME, blkdev_issue_zeroout() may fail with -EREMOTEIO:

  $ fallocate -zn -l 1k /dev/sdg
  fallocate: fallocate failed: Remote I/O error
  $ fallocate -zn -l 1k /dev/sdg  # OK
  $ fallocate -zn -l 1k /dev/sdg  # OK

The following calls succeed because sd_done() sets ->no_write_same in
response to a sense that would become BLK_STS_TARGET/-EREMOTEIO, causing
__blkdev_issue_zeroout() to fall back to generating ZERO_PAGE bios.

This means blkdev_issue_zeroout() must cope with WRITE ZEROES failing
and fall back to manually zeroing, unless BLKDEV_ZERO_NOFALLBACK is
specified.  For BLKDEV_ZERO_NOFALLBACK case, return -EOPNOTSUPP if
sd_done() has just set ->no_write_same thus indicating lack of offload
support.

Fixes: c20cfc27 ("block: stop using blkdev_issue_write_same for zeroing")
Cc: Hannes Reinecke <hare@suse.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

blkdev_issue_zeroout() will use this in !BLKDEV_ZERO_NOFALLBACK case.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Fix possible integer overflow in __blkdev_sectors_to_bio_pages if
sector_t is 32-bit.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Fixes: 615d22a5 ("block: Fix __blkdev_issue_zeroout loop")
Reviewed-by: NDamien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This way we don't need a block_device structure to submit I/O.  The
block_device has different life time rules from the gendisk and
request_queue and is usually only available when the block device node
is open.  Other callers need to explicitly create one (e.g. the lightnvm
passthrough code, or the new nvme multipathing code).

For the actual I/O path all that we need is the gendisk, which exists
once per block device.  But given that the block layer also does
partition remapping we additionally need a partition index, which is
used for said remapping in generic_make_request.

Note that all the block drivers generally want request_queue or
sometimes the gendisk, so this removes a layer of indirection all
over the stack.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The BIO issuing loop in __blkdev_issue_zeroout() is allocating BIOs
with a maximum number of bvec (pages) equal to

min(nr_sects, (sector_t)BIO_MAX_PAGES)

This works since the requested number of bvecs will always be limited
to the absolute maximum number supported (BIO_MAX_PAGES), but this is
ineficient as too many bvec entries may be requested due to the
different units being used in the min() operation (number of sectors vs
number of pages).
To fix this, introduce the helper __blkdev_sectors_to_bio_pages() to
correctly calculate the number of bvecs for zeroout BIOs as the issuing
loop progresses. The calculation is done using consistent units and
makes sure that the number of pages return is at least 1 (for cases
where the number of sectors is less that the number of sectors in
a page).

Also remove a trailing space after the bit shift in the internal loop
min() call.
Signed-off-by: NDamien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Now that we use the proper REQ_OP_WRITE_ZEROES operation everywhere we can
kill this hack.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Now that we have REQ_OP_WRITE_ZEROES implemented for all devices that
support efficient zeroing, we can remove the call to blkdev_issue_discard.
This means we only have two ways of zeroing left and can simplify the
code.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

This avoids fallbacks to explicit zeroing in (__)blkdev_issue_zeroout if
the caller doesn't want them.

Also clean up the convoluted check for the return condition that this
new flag is added to.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

If this flag is set logical provisioning capable device should
release space for the zeroed blocks if possible, if it is not set
devices should keep the blocks anchored.

Also remove an out of sync kerneldoc comment for a static function
that would have become even more out of data with this change.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Turn the existing discard flag into a new BLKDEV_ZERO_UNMAP flag with
similar semantics, but without referring to diѕcard.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

We'll always use the WRITE ZEROES code for zeroing now.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

BLKDEV_IFL_* flags no longer exist; blkdev_issue_discard() now actually
takes BLKDEV_DISCARD_* flags.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Write Same can return an error asynchronously if it turns out the
underlying SCSI device does not support Write Same, which makes a
proper fallback to other methods in __blkdev_issue_zeroout impossible.
Thus only issue a Write Same from blkdev_issue_zeroout an don't try it
at all from __blkdev_issue_zeroout as a non-invasive workaround.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reported-by: NJunichi Nomura <j-nomura@ce.jp.nec.com>
Fixes: e73c23ff ("block: add async variant of blkdev_issue_zeroout")
Tested-by: NJunichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Discard can return -EIO asynchronously if the alignment for the request
isn't suitable for the driver, which makes a proper fallback to other
methods in __blkdev_issue_zeroout impossible.  Thus only issue a sync
discard from blkdev_issue_zeroout an don't try discard at all from
__blkdev_issue_zeroout as a non-invasive workaround.

One more reason why abusing discard for zeroing must die..
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reported-by: NEryu Guan <eguan@redhat.com>
Fixes: e73c23ff ("block: add async variant of blkdev_issue_zeroout")
Signed-off-by: NJens Axboe <axboe@fb.com>

Instead of allocating a single unused biovec for discard requests, send
them down without any payload.  Instead we allow the driver to add a
"special" payload using a biovec embedded into struct request (unioned
over other fields never used while in the driver), and overloading
the number of segments for this case.

This has a couple of advantages:

 - we don't have to allocate the bio_vec
 - the amount of special casing for discard requests in the block
   layer is significantly reduced
 - using this same scheme for other request types is trivial,
   which will be important for implementing the new WRITE_ZEROES
   op on devices where it actually requires a payload (e.g. SCSI)
 - we can get rid of playing games with the request length, as
   we'll never touch it and completions will work just fine
 - it will allow us to support ranged discard operations in the
   future by merging non-contiguous discard bios into a single
   request
 - last but not least it removes a lot of code

This patch is the common base for my WIP series for ranges discards and to
remove discard_zeroes_data in favor of always using REQ_OP_WRITE_ZEROES,
so it would be good to get it in quickly.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

This adds a new block layer operation to zero out a range of
LBAs. This allows to implement zeroing for devices that don't use
either discard with a predictable zero pattern or WRITE SAME of zeroes.
The prominent example of that is NVMe with the Write Zeroes command,
but in the future, this should also help with improving the way
zeroing discards work. For this operation, suitable entry is exported in
sysfs which indicate the number of maximum bytes allowed in one
write zeroes operation by the device.
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@hgst.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

Similar to __blkdev_issue_discard this variant allows submitting
the final bio asynchronously and chaining multiple ranges
into a single completion.
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@hgst.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

Now that we don't need the common flags to overflow outside the range
of a 32-bit type we can encode them the same way for both the bio and
request fields.  This in addition allows us to place the operation
first (and make some room for more ops while we're at it) and to
stop having to shift around the operation values.

In addition this allows passing around only one value in the block layer
instead of two (and eventuall also in the file systems, but we can do
that later) and thus clean up a lot of code.

Last but not least this allows decreasing the size of the cmd_flags
field in struct request to 32-bits.  Various functions passing this
value could also be updated, but I'd like to avoid the churn for now.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

Make sure that the offset and length arguments that we're using to
construct WRITE SAME and DISCARD requests are actually aligned to the
logical block size.  Failure to do this causes other errors in other parts
of the block layer or the SCSI layer because disks don't support partial
logical block writes.

Link: http://lkml.kernel.org/r/147518379026.22791.4437508871355153928.stgit@birch.djwong.orgSigned-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Mike Snitzer <snitzer@redhat.com> # tweaked header
Cc: Brian Foster <bfoster@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

WRITE SAME is a data integrity operation and we can't simply ignore
errors.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Currently blkdev_issue_zeroout cascades down from discards (if the driver
guarantees that discards zero data), to WRITE SAME and then to a loop
writing zeroes.  Unfortunately we ignore run-time EOPNOTSUPP errors in the
block layer blkdev_issue_discard helper to work around DM volumes that
may have mixed discard support underneath.

This patch intoroduces a new BLKDEV_DISCARD_ZERO flag to
blkdev_issue_discard that indicates we are called for zeroing operation.
This allows both to ignore the EOPNOTSUPP hack and actually consolidating
the discard_zeroes_data check into the function.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Instead of overloading the discard support with the REQ_SECURE flag.
Use the opportunity to rename the queue flag as well, and remove the
dead checks for this flag in the RAID 1 and RAID 10 drivers that don't
claim support for secure erase.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

This converts the block issue discard helper and users to use
the bio_set_op_attrs accessor and only pass in the operation flags
like REQ_SEQURE.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

This patch converts the simple bi_rw use cases in the block,
drivers, mm and fs code to set/get the bio operation using
bio_set_op_attrs/bio_op

These should be simple one or two liner cases, so I just did them
in one patch. The next patches handle the more complicated
cases in a module per patch.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

This has callers of submit_bio/submit_bio_wait set the bio->bi_rw
instead of passing it in. This makes that use the same as
generic_make_request and how we set the other bio fields.
Signed-off-by: NMike Christie <mchristi@redhat.com>

Fixed up fs/ext4/crypto.c
Signed-off-by: NJens Axboe <axboe@fb.com>

submit_bio_wait() gives the caller an opportunity to examine
struct bio and so expects the caller to issue the put_bio()

This fixes a memory leak reported by a few people in 4.7-rc2
kmemleak report after 9082e87b ("block: remove struct bio_batch")
Signed-off-by: NShaun Tancheff <shaun.tancheff@seagate.com>
Tested-by: NCatalin Marinas <catalin.marinas@arm.com>
Tested-by: Larry Finger@lwfinger.net
Tested-by: NDavid Drysdale <drysdale@google.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

Commit 38f25255 ("block: add __blkdev_issue_discard") incorrectly
disallowed the early return of -EOPNOTSUPP if the device doesn't support
discard (or secure discard).  This early return of -EOPNOTSUPP has
always been part of blkdev_issue_discard() interface so there isn't a
good reason to break that behaviour -- especially when it can be easily
reinstated.

The nuance of allowing early return of -EOPNOTSUPP vs disallowing late
return of -EOPNOTSUPP is: if the overall device never advertised support
for discards and one is issued to the device it is beneficial to inform
the caller that discards are not supported via -EOPNOTSUPP.  But if a
device advertises discard support it means that at least a subset of the
device does have discard support -- but it could be that discards issued
to some regions of a stacked device will not be supported.  In that case
the late return of -EOPNOTSUPP must be disallowed.

Fixes: 38f25255 ("block: add __blkdev_issue_discard")
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

This is a version of blkdev_issue_discard which doesn't wait for
the I/O to complete, but instead allows the caller to submit
the final bio and/or chain it to others.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMing Lin <ming.l@ssi.samsung.com>
Signed-off-by: NSagi Grimberg <sagig@grimberg.me>
Reviewed-by: NMing Lei <tom.leiming@gmail.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

It can be replaced with a combination of bio_chain and submit_bio_wait.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMing Lin <ming.l@ssi.samsung.com>
Signed-off-by: NSagi Grimberg <sagig@grimberg.me>
Reviewed-by: NMing Lei <tom.leiming@gmail.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

In commit b49a0871("block: remove split code in
blkdev_issue_{discard,write_same}"), discard_granularity and alignment
checks were removed. Ideally, with bio late splitting, the upper layers
shouldn't need to depend on device's limits.

Christoph reported a discard regression on the HGST Ultrastar SN100 NVMe
device when mkfs.xfs. We have not found the root cause yet.

This patch re-adds discard_granularity and alignment checks by reverting
the related changes in commit b49a0871. The good thing is now we can
remove the 2G discard size cap and just use UINT_MAX to avoid bi_size
overflow.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Tested-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMing Lin <ming.l@ssi.samsung.com>
Reviewed-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

The split code in blkdev_issue_{discard,write_same} can go away
now that any driver that cares does the split. We have to make
sure bio size doesn't overflow.

For discard, we set max discard sectors to (1<<31)>>9 to ensure
it doesn't overflow bi_size and hopefully it is of the proper
granularity as long as the granularity is a power of two.
Acked-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NMing Lin <ming.l@ssi.samsung.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Currently we have two different ways to signal an I/O error on a BIO:

 (1) by clearing the BIO_UPTODATE flag
 (2) by returning a Linux errno value to the bi_end_io callback

The first one has the drawback of only communicating a single possible
error (-EIO), and the second one has the drawback of not beeing persistent
when bios are queued up, and are not passed along from child to parent
bio in the ever more popular chaining scenario.  Having both mechanisms
available has the additional drawback of utterly confusing driver authors
and introducing bugs where various I/O submitters only deal with one of
them, and the others have to add boilerplate code to deal with both kinds
of error returns.

So add a new bi_error field to store an errno value directly in struct
bio and remove the existing mechanisms to clean all this up.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Reviewed-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

blkdev_issue_zeroout() printed a warning if a device failed a discard or
write same request despite advertising support for these. That's fine
for SCSI since we'll disable these commands if we get an error back from
the disk saying that they are not supported. And consequently the
warning only gets printed once.

There are other types of block devices that support discard, however,
and these may return -EOPNOTSUPP for each command but leave discard
enabled in the queue limits. This will cause a warning message for every
blkdev_issue_zeroout() invocation.

Remove the offending warning messages.
Reported-by: NSedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Tested-by: NSedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

blkdev_issue_discard() will zero a given block range. This is done by
way of explicit writing, thus provisioning or allocating the blocks on
disk.

There are use cases where the desired behavior is to zero the blocks but
unprovision them if possible. The blocks must deterministically contain
zeroes when they are subsequently read back.

This patch adds a flag to blkdev_issue_zeroout() that provides this
variant. If the discard flag is set and a block device guarantees
discard_zeroes_data we will use REQ_DISCARD to clear the block range. If
the device does not support discard_zeroes_data or if the discard
request fails we will fall back to first REQ_WRITE_SAME and then a
regular REQ_WRITE.

Also update the callers of blkdev_issue_zero() to reflect the new flag
and make sb_issue_zeroout() prefer the discard approach.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

__blkdev_issue_zeroout is only used in blk-lib.c

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NJens Axboe <axboe@fb.com>

When mkfs issues a full device discard and the device only
supports discards of a smallish size, we can loop in
blkdev_issue_discard() for a long time. If preempt isn't enabled,
this can turn into a softlock situation and the kernel will
start complaining.

Add an explicit cond_resched() at the end of the loop to avoid
that.

Cc: stable@kernel.org
Signed-off-by: NJens Axboe <axboe@fb.com>