The init sequence set a number of registers more than once to different
values.  It's only necessary to set them once to their final values.
It also never actually updated the digital attenuation settings.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Add more symbol name for SPI register values.  Change the SPI_XXX_BIT defines
from the bit number to a mask.  Saves having to write (1<<SPI_XXX_BIT) all the
time to convert to mask.  We never end up wanting the bit number.
Use all the symbol names for the SPI DAC init sequence.  The sequence is
exactly the same as it was before.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

For cards with an SPI DAC (SB Live 24-bit / Audigy SE), power down channels
0-2 when not in use.  They are powered up on PCM open and down again on PCM
close.  Channel 4 (== Front) is not powered down, as it is used for capture
feedback.  Powering it down would effectively kill line in pass-through.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

The SPDIF output on AD1988 had some problems due to the wrongly routed
analog loopback to SPDIF.  This patch fixes the implementation of
'IEC958 Playback Source' mixer to handle the amp bits of mixer widget
0x1d correctly.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Since the PCM emulation can call multiple times to hw_setup(), but we
can only once allocate/request the DMA channel, we have to handle
this gracefully.
Signed-off-by: NHarald Welte <laforge@openmoko.org>
Signed-off-by: NArnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Turn a rather long lined for loop that is duplicated multiple times into a
macro.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Add four mute controls for the analog output channels for cards that use
an SPI DAC, like the SB0570 SB Live! 24-bit / Audigy SE.  The Wolfson DAC
doesn't support muting left/right so the controls are mono.
The chip state struct gets a 32-byte array to act as a shadow of the spi
dac registers.  Only two registers are used for mute, but more would be
needed for analog gain, de-emphasis, DAC power down, phase inversion, and
other features.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

This patch fixes an off-by-one in a snd_assert() spotted by the
Coverity checker.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

There were some places I forgot to replace with snd_ctl_boolean_mono_info.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Patch submitted by Ctirad Fertr
<c.fertr@volny.cz>
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Details:
Fixes http://bugzilla.kernel.org/show_bug.cgi?id=8176Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

The existing code for handling the 44.1 slot's volume has two problems:
the volume is not affected by the 'Wave Playback Volume' mixer control,
and the BUF441OUTVOL register, which is used to control the per-
substream volume for this slot, uses a different scale than the gain
fields of the other slots.
This patch makes the BUF441OUTVOL register a shadow of the
NATIVEDACOUTVOL register so that the Wave volume is consistent for all
substreams.
As a consequence of this, the per-substream PCM volume control gets no
longer activated for the substream using this slot.  The code for
(de)activating the mixer control is moved from the open/close to the
prepare/trigger_stop callbacks so that it is able to determine the
substream's slot.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

This patch adds support for the AT73C213 DAC using the misc Atmel SSC driver in
I2S mode. The driver also requires a SPI to setup the registers and control
volume.
It has been tested with an AT32AP7000 on the ATSTK1000 development board. The
driver should also work with any Atmel device with an SSC module supported by
the Atmel SSC driver (atmel-ssc).
The atmel-ssc driver is just submitted to the Linux kernel. Please see mail
thread http://lkml.org/lkml/2007/7/16/32Signed-off-by: NHans-Christian Egtvedt <hcegtvedt@atmel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

This patch adds SPI devices in the ALSA diretory, including the Kconfig and
Makefile.
Signed-off-by: NHans-Christian Egtvedt <hcegtvedt@atmel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

SND_S3C24XX_SOC_NEO1973_WM8753 depends on MACH_GTA01 but the Kconfig
entry which is going to be merged is MACH_NEO1973_GTA01.
Signed-off-by: NArnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Clean up codes using the new common snd_ctl_boolean_*_info() callbacks.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Added helper functions for frequenty used callbacks:
  snd_ctl_boolean_mono_info() and snd_ctl_boolean_stereo_info()
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Notebook.
Description: The .device=0x0008 chips have new, but different EMU32 in/out
channels. Driver updated to make use of these EMU32 channels.
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

This patch cleans up duplicate includes in
	sound/core/
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

This patch cleans up duplicate includes in
	sound/soc/
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

This patch cleans up duplicate includes in
	sound/ppc/
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

sound/aoa/codecs/snd-aoa-codec-tas.c:750: warning: 'tas_suspend' defined but not used
sound/aoa/codecs/snd-aoa-codec-tas.c:760: warning: 'tas_resume' defined but not used
Acked-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (95 commits)
  [ARM] 4578/1: CM-x270: PCMCIA support
  [ARM] 4577/1: ITE 8152 PCI bridge support
  [ARM] 4576/1: CM-X270 machine support
  [ARM] pxa: Avoid pxa_gpio_mode() in gpio_direction_{in,out}put()
  [ARM] pxa: move pxa_set_mode() from pxa2xx_mainstone.c to mainstone.c
  [ARM] pxa: move pxa_set_mode() from pxa2xx_lubbock.c to lubbock.c
  [ARM] pxa: Make cpu_is_pxaXXX dependent on configuration symbols
  [ARM] pxa: PXA3xx base support
  [NET] smc91x: fix PXA DMA support code
  [SERIAL] Fix console initialisation ordering
  [ARM] pxa: tidy up arch/arm/mach-pxa/Makefile
  [ARM] Update arch/arm/Kconfig for drivers/Kconfig changes
  [ARM] 4600/1: fix kernel build failure with build-id-supporting binutils
  [ARM] 4599/1: Preserve ATAG list for use with kexec (2.6.23)
  [ARM] Rename consistent_sync() as dma_cache_maint()
  [ARM] 4572/1: ep93xx: add cirrus logic edb9307 support
  [ARM] 4596/1: S3C2412: Correct IRQs for SDI+CF and add decoding support
  [ARM] 4595/1: ns9xxx: define registers as void __iomem * instead of volatile u32
  [ARM] 4594/1: ns9xxx: use the new gpio functions
  [ARM] 4593/1: ns9xxx: implement generic clockevents
  ...

* 'locks' of git://linux-nfs.org/~bfields/linux:
  nfsd: remove IS_ISMNDLCK macro
  Rework /proc/locks via seq_files and seq_list helpers
  fs/locks.c: use list_for_each_entry() instead of list_for_each()
  NFS: clean up explicit check for mandatory locks
  AFS: clean up explicit check for mandatory locks
  9PFS: clean up explicit check for mandatory locks
  GFS2: clean up explicit check for mandatory locks
  Cleanup macros for distinguishing mandatory locks
  Documentation: move locks.txt in filesystems/
  locks: add warning about mandatory locking races
  Documentation: move mandatory locking documentation to filesystems/
  locks: Fix potential OOPS in generic_setlease()
  Use list_first_entry in locks_wake_up_blocks
  locks: fix flock_lock_file() comment
  Memory shortage can result in inconsistent flocks state
  locks: kill redundant local variable
  locks: reverse order of posix_locks_conflict() arguments

* 'release' of ssh://master.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] build fix for scatterlist

This driver was using hooks that were very recently removed.
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (42 commits)
  [IPV6]: Consolidate the ip6_pol_route_(input|output) pair
  [TCP]: Make snd_cwnd_cnt 32-bit
  [TCP]: Update the /proc/net/tcp documentation
  [NETNS]: Don't panic on creating the namespace's loopback
  [NEIGH]: Ensure that pneigh_lookup is protected with RTNL
  [INET]: kmalloc+memset -> kzalloc in frag_alloc_queue
  [ISDN]: Fix compile with CONFIG_ISDN_X25 disabled.
  [IPV6]: Replace sk_buff ** with sk_buff * in input handlers
  [SELINUX]: Update for netfilter ->hook() arg changes.
  [INET]: Consolidate the xxx_put
  [INET]: Small cleanup for xxx_put after evictor consolidation
  [INET]: Consolidate the xxx_evictor
  [INET]: Consolidate the xxx_frag_destroy
  [INET]: Consolidate xxx_the secret_rebuild
  [INET]: Consolidate the xxx_frag_kill
  [INET]: Collect common frag sysctl variables together
  [INET]: Collect frag queues management objects together
  [INET]: Move common fields from frag_queues in one place.
  [TG3]: Fix performance regression on 5705.
  [ISDN]: Remove local copy of device name to make sure renames work.
  ...

There are standard keycodes for brightness and volume; map the events to
emit them so that things work properly
Signed-off-by: NJeremy Katz <katzj@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

include/scsi/scsi_eh.h:79: error: field `sense_sgl' has incomplete type

x86 resolves this by including scatterlist.h from dma-mapping.h which
seems as good a place as any.
Signed-off-by: NTony Luck <tony.luck@intel.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits)
  Input: use full RCU API
  Input: remove tsdev interface
  Input: add support for Blackfin BF54x Keypad controller
  Input: appletouch - another fix for idle reset logic
  HWMON: hdaps - switch to using input-polldev
  Input: add support for SEGA Dreamcast keyboard
  Input: omap-keyboard - don't pretend we support changing keymap
  Input: lifebook - fix X and Y axis range
  Input: usbtouchscreen - add support for GeneralTouch devices
  Input: fix open count handling in input interfaces
  Input: keyboard - add CapsShift lock
  Input: adbhid - produce all CapsLock key events
  Input: ALPS - add signature for ThinkPad R61
  Input: jornada720_kbd - send MSC_SCAN events
  Input: add support for the HP Jornada 7xx (710/720/728) touchscreen
  Input: add support for HP Jornada 7xx onboard keyboard
  Input: add support for HP Jornada onboard keyboard (HP6XX)
  Input: ucb1400_ts - use schedule_timeout_uninterruptible
  Input: xpad - fix dependancy on LEDS class
  Input: auto-select INPUT for MAC_EMUMOUSEBTN option
  ...

Resolved conflicts manually in drivers/hwmon/applesmc.c: converting from
a class device to a device and converting to use input-polldev created a
few apparently trivial clashes..

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [libata] pata_pcmcia: Add additional id string (corsair, 1GB)
  libata: prevent devices with blank model names from being DMA blacklisted
  ata_piix: SATA 2port controller port map fix
  pata_cs5536: ATA driver for Geode companion chip
  libata: add ST9160821AS / 3.CCD to NCQ blacklist
  libata: fix revalidation issuing after configuration commands
  [libata] sata_nv: add SW NCQ support for MCP51/MCP55/MCP61
  [libata] pata_sil680: Add MMIO support

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (35 commits)
  xen-netfront: rearrange netfront structure to separate tx and rx
  netdev: convert non-obvious instances to use ARRAY_SIZE()
  ucc_geth: Fix build break introduced by commit 09f75cd7
  gianfar: Fix regression caused by new napi interface
  gianfar: Cleanup compile warning caused by 0795af57
  gianfar: Fix compile regression caused by bea3348e
  add new prom.h for AU1x00
  update AU1000 get_ethernet_addr()
  MIPSsim: General cleanup
  Jazzsonic: Fix warning about unused variable.
  Remove msic_dcr_read() in axon_msi.c
  Use dcr_host_t.base in dcr_unmap()
  Add dcr_host_t.base in dcr_read()/dcr_write()
  Use dcr_host_t.base in ibm_emac_mal
  Update ibm_newemac to use dcr_host_t.base
  tehuti: possible leak in bdx_probe
  TC35815: Fix build
  SAA9730: Fix build
  AR7 ethernet
  myri10ge: update driver version to 1.3.2-1.287
  ...

Keep tx and rx elements separate on different cachelines to prevent
bouncing.
Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
Acked-by: NJeff Garzik <jgarzik@pobox.com>
Cc: Stephen Hemminger <shemminger@linux-foundation.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Atari keyboard: incorporate additional review comments:
  o Kill reference to source file name
  o Return error value from input_register_device() instead of -ENOMEM
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Michael Schmitz <schmitz@biophys.uni-duesseldorf.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The difference in both functions is in the "id" passed to
the rt6_select, so just pass it as an extra argument from
two outer helpers.

This is minus 60 lines of code and 360 bytes of .text
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Very little point of having 32-bit snd_cnwd if this is not
32-bit as well, as a number of snd_cwnd incrementation formulas
assume that snd_cwnd_cnt can be at least as large as snd_cwnd.

Whether 32-bit is useful was discussed when e0ef57cc
was made:
  http://marc.info/?l=linux-netdev&m=117218144409825&w=2Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* Say that this interface is deprecated.
* Update function name references to match the current code.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This will convert remaining non-obvious or naive calculations of array
sizes to use ARRAY_SIZE() macro.
Signed-off-by: NAlejandro Martinez Ruiz <alex@flawedcode.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

When the loopback device is failed to initialize inside the new 
namespaces, panic() is called. Do not do it when the namespace 
in question is not the init_net.

Plus cleanup the error path a bit.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>