This structure is no longer used, and references registers defined in mii.h and other parts of et1310_phy.h
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Replaced et131x_phy.c magic numbers specifying registers and their values with defines, defined in et131x_phy.h
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The VMI_* set of register defines are not used, and duplicate the set of PHY_* registers from the same file, which are used - hence removing.
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

cached_mask_value is only ever assigned, never read. Remove it.
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

registry_rx_mem_end is not referenced anywhere in the driver.
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

As et131x_adjust_link is called from the phydev in response to a netif_carrier_[on|off], and is the only caller of et131x_mii_check, we don't need to call netif_carrier_[on|off] again.
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The PHY interrupt is now handled by the phy_device, and the equivalent code is present in et131x_adjust_link, called from the phy_device when needed.
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

adapter->speed_duplex was never referenced.
adapter->registry_phy_coma was always set to zero, even in the vendor driver.

Removing all member references and associated dead code.
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The phy device keeps a note of the duplex mode, so use that value instead of duplex mode.

Also use the phydev defines for duplex modes, and remove the driver private ones.
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The phy device keeps a note of the link speed, so use that value instead of the driver private one.

Also use the phydev defines for link speeds, and remove the driver private ones.

adapter->hw_errs was never used, even in the vendor driver, so remove that too.
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

I think the kernel style cleanups are done now.
Adding myself as a recipient of patches.
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Some of my previous hacking attempts have not been following the rules.
All fixes either lines > 80 chars or whitespace corrections (spaces->tabs etc).
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Use defines from include/linux/mii.h instead of et131x_phy.h and delete the latter defines.
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove dead and unused code in sbecom_inline_linux.h. This also fixes a
build failure under Turkish locale, where include/config/modversions.h
is incorrectly named as modversIons.h (an unrelated kbuild bug) and the
driver tries to needlessly include the empty file.
Reported-by: NSerdar KÖYLÜ <s.koylux@gmail.com>
Cc: Bob Beers <bob.beers@gmail.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

If sep_ioctl() is called from a process that does not own
current transaction, it unlocks unheld sep->ioctl_mutex and
returns -EACCES leaving sep->sep_mutex acquired.

The patch fixes the mutex lock-unlock mismatch.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fixed the checkpatch warning about sing simple_strtoul instead of
kstrtoul() in panel.c.
Signed-off-by: NPelle Windestam <iceaway@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Now we are using a phy_device, remove driver functionality that is now handled by the phydev.
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Use the phy_device equivalents instead.
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Handing over ioctls handled by the driver to the phydev.
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

mei_open() acquires dev->device_lock mutex and try to allocate mei_cl,
but if the allocation fails it goes to return statement. As a result
dev->device_lock left locked.

The patch fixes goto to unlock dev->device_lock mutex on this path.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Substituted macro.
Reported-by: NJohannes Berg <johannes@sipsolutions.net>
Reported-by: NJoe Perches <joe@perches.com>
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Substituted/removed macro's.
Reported-by: NJohannes Berg <johannes@sipsolutions.net>
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Substituted/removed macro's.
Reported-by: NJohannes Berg <johannes@sipsolutions.net>
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

AP support was only partially implemented and never invoked.
AP related code sections removed.
Reported-by: NJohannes Berg <johannes@sipsolutions.net>
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Substituted/removed macro's.
Reported-by: NJohannes Berg <johannes@sipsolutions.net>
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Substituted macro's.
Reported-by: NJohannes Berg <johannes@sipsolutions.net>
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Substituted macro's.
Reported-by: NJohannes Berg <johannes@sipsolutions.net>
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Kconfig options are by default not selected so adding the
statement 'default n' to the option is not needed.
Reported-by: NJohannes Berg <johannes@sipsolutions.net>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The source file main.c contained several sparse warnings which
have been cleaned up.
Reported-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: NFranky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Several sparse warning were issued due to missing __user qualifier
for brcmfmac variables. This patch adds those.
Reported-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: NFranky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Running sparse showed following warning: Using plain integer as NULL
pointer. This has been fixed.
Reported-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: NFranky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Sparse warning was given when using the extern keyword in the function
definition. This patch removes those instances.
Reported-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: NFranky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Moved, deleted or substituted macro's.
Reported-by: NJohannes Berg <johannes@sipsolutions.net>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Moved, deleted or substituted macro's.
Reported-by: NJohannes Berg <johannes@sipsolutions.net>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Moved, deleted or substituted macro's.
Reported-by: NJohannes Berg <johannes@sipsolutions.net>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Moved, deleted or substituted macro's.
Reported-by: NJohannes Berg <johannes@sipsolutions.net>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Moved, deleted or substituted macro's.
Reported-by: NJohannes Berg <johannes@sipsolutions.net>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Reported-by: NJohannes Berg <johannes@sipsolutions.net>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Reported-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>