In order to support constant callers of agent_send_response we add const
specifiers to the its pointer arguments.

Adjust the call tree accordingly.
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NHal Rosenstock <hal@mellanox.com>
Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The process_mad device function declares some parameters as "in".  Make those
parameters const and adjust the call tree under process_mad in the various
drivers accordingly.
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NHal Rosenstock <hal@mellanox.com>
Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The ib_device passed to the new RDMA helpers is constant.  Declare the
ib_device as const in the following functions.

rdma_protocol_ib
rdma_protocol_roce
rdma_protocol_iwarp
rdma_ib_or_roce
rdma_cap_ib_mad
rdma_cap_ib_smi
rdma_cap_ib_cm
rdma_cap_iw_cm
rdma_cap_ib_sa
rdma_cap_ib_mcast
rdma_cap_af_ib
rdma_cap_eth_ah
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NHal Rosenstock <hal@mellanox.com>
Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The unwinding clean up code are err_create_flow starts at the current
index i.  That means we shouldn't increment i until we're really sure
we won't have to destroy the current flow; otherwise we might
increment the index, fail inside an is_bonded block, and end up
accessing off the end of the reg_id[] array.

This was detected by Coverity (CID 1271229).
Signed-off-by: NRoland Dreier <roland@purestorage.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

If ocrdma_get_pd_num() fails, then we need to free the pd struct we allocated.

This was detected by Coverity (CID 1271245).
Signed-off-by: NRoland Dreier <roland@purestorage.com>
Acked-By: NDevesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The BUG_ON at line 452/453 is triggered in function rds_send_xmit.

 441                         while (ret) {
 442                                 tmp = min_t(int, ret, sg->length -
 443                                                       conn->c_xmit_data_off);
 444                                 conn->c_xmit_data_off += tmp;
 445                                 ret -= tmp;
 446                                 if (conn->c_xmit_data_off == sg->length) {
 447                                         conn->c_xmit_data_off = 0;
 448                                         sg++;
 449                                         conn->c_xmit_sg++;
 450                                         if (ret != 0 && conn->c_xmit_sg == rm->data.op_nents)
 451                                                 printk(KERN_ERR "conn %p rm %p sg %p ret %d\n", conn, rm, sg, ret);
 452                                         BUG_ON(ret != 0 &&
 453                                                conn->c_xmit_sg == rm->data.op_nents);
 454                                 }
 455                         }

it is complaining the total sent length is bigger that we want to send.

rds_ib_xmit() is wrong for the second entry for the same rds_message returning
wrong value.

the sg and off passed by rds_send_xmit to rds_ib_xmit is based on
scatterlist.offset/length, but the rds_ib_xmit action is based on
scatterlist.dma_address/dma_length. in case dma_length is larger than length
there is problem. for the 2nd and later entries of rds_ib_xmit for same
rds_message, at least one of the following two is wrong:

1) the scatterlist to start with,  the choosen one can far beyond the correct
   one.
2) the offset to start with within the scatterlist.

fix:
add op_dmasg and op_dmaoff to rm_data_op structure indicating the scatterlist
and offset within the it to start with for rds_ib_xmit respectively. op_dmasg
and op_dmaoff are initialized to zero when doing dma mapping for the first see
of the message and are changed when filling send slots.

the same applies to rds_iw_xmit too.
Signed-off-by: NWengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Avoid that sparse complains about ipoib_neigh_hash_init(). This
patch does not change any functionality. See also patch "IPoIB:
Fix memory leak in the neigh table deletion flow" (commit ID
66172c09).
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Cc: Shlomo Pongratz <shlomop@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

RDMA/nes: Enable the use of the tos field in the nes driver
Signed-off-by: NFaisal Latif <Faisal.Latif@intel.com>
Signed-off-by: NTatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

rdma-cma/iw_cm: Export tos field to iwarp providers
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NTatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

After discussion upstream, it was agreed to transition the usage of iboe
in the kernel to roce.  This keeps our terminology consistent with what
was finalized in the IBTA Annex 16 and IBTA Annex 17 publications.
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Remove query_protocol callback

Use the new Core Capability bits for:

rdma_protocol_*
rdma_cap_ib_mad
rdma_cap_ib_smi
rdma_cap_ib_cm
rdma_cap_iw_cm
rdma_cap_ib_sa
rdma_cap_ib_mcast
rdma_cap_af_ib
rdma_cap_eth_ah
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

As of commit 5eb620c8 "IB/core: Add helpers for uncached GID and P_Key
searches"; pkey_tbl_len and gid_tbl_len are immutable data which are stored in
the ib_device.

The per port core capability flags to be added later are also immutable data to
be stored in the ib_device object.

In preparation for this create a structure for per port immutable data and
place the pkey and gid table lengths within this structure.

"get_port_immutable" is added as a mandatory device function to allow the
drivers to fill in this data.
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The addition of the rdma_cap_ib_mad is technically broken in ib_umad_remove_one
because the loop "i" value is not a port value.

This bug resulted in the ib_umad failing to properly remove its resources when
the core capability functions were converted to bit fields.

NOTE: e17371d73908 did not result in broken behavior on its own.  It was only
an issue when the implementation of rdma_cap_ib_mad was changed.

Pass the port value to rdma_cap_ib_mad.

Fixes: e17371d73908 ("IB/Verbs: Use management helper rdma_cap_ib_mad()")
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Use the new common rdma_[start|end]_port functions instead of using
local variables and figuring it out on the fly.
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The following functions only need read access to the data passed to them.

ib_mad_kernel_rmpp_agent
is_rmpp_data_mad
rcv_has_same_gid
ib_find_send_mad

Clarify with const specifiers
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

rcv_has_same_class only needs access to the MAD header
specify WR and Receive WC as const
Reviewed-By: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

ib_response_mad only needs read access to the MAD header, not write access
to the entire mad struct, so replace struct ib_mad with const struct
ib_mad_hdr
Reviewed-By: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

validate_mad only needs read access to the MAD header, not write access
to the entire mad struct, so replace struct ib_mad with const struct
ib_mad_hdr
Reviewed-By: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NAnna Schumaker <anna.schumaker@netapp.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Some of us keep revisiting the code to decode enumerations that
appear in out logs. Let's borrow the nice logging helpers that
exists in xprtrdma and rds for CMA events, IB events and WC statuses.
Reviewd-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The SCSI standard defines 64-bit values for LUNs. Large arrays
employing large or hierarchical LUN numbers become more and more
common. So update the SRP initiator to use 64-bit LUN numbers.
See also Hannes Reinecke, commit 9cb78c16 ("scsi: use 64-bit LUNs"),
June 2014.

The largest LUN number that has been tested is 0xd2003fff00000000.

Checked the following structure sizes with gdb:
* sizeof(struct srp_cmd) = 48
* sizeof(struct srp_tsk_mgmt) = 48
* sizeof(struct srp_aer_req) = 36

The ibmvscsi changes have been compile tested only (on a PPC system).
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Reviewed-by: NYann Droneaud <ydroneaud@opteya.com>
Cc: Sebastian Parschauer <sebastian.riemer@profitbricks.com>
Cc: Brian King <brking@linux.vnet.ibm.com>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Remove the !ch->target tests from the reconnect code. These
tests are not needed: upon entry of srp_rport_reconnect()
it is guaranteed that all ch->target pointers are non-NULL.
None of the functions srp_new_cm_id(), srp_finish_req(),
srp_create_ch_ib() nor srp_connect_ch() modifies this pointer.
srp_free_ch_ib() is never called concurrently with
srp_rport_reconnect().
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Cc: Sebastian Parschauer <sebastian.riemer@profitbricks.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The function srp_free_req_data() does not use ch->target.
Hence remove the ch->target != NULL check.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Sebastian Parschauer <sebastian.riemer@profitbricks.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Move the module version and release date into separate fields.
This makes the modinfo output easier to read.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Cc: Sebastian Parschauer <sebastian.riemer@profitbricks.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

A long time ago the data type int64_t was declared as long long
on x86 systems and as long on PPC systems. Today that data type
is declared as long long on all Linux architectures. This means
that the casts from uint64_t into unsigned long long are
superfluous. Remove these superfluous casts.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Cc: Sebastian Parschauer <sebastian.riemer@profitbricks.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Unlike FC, there is no risk that SCSI devices will be offlined
by the SCSI error handler if the SCSI error handler is started
while a reconnect attempt is ongoing. Hence report timeout errors
as soon as possible if a higher software layer (e.g. multipathd)
needs to be informed about a timeout. It is assumed that if both
fast_io_fail_tmo < 0 and rport->dev_loss_tmo < 0 that this means
that there is no need to report timeouts quickly.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Cc: James Bottomley <JBottomley@Odin.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Sebastian Parschauer <sebastian.riemer@profitbricks.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Although it is possible to let SRP I/O continue if a reconnect
results in a reduction of the number of channels, the current
code does not handle this scenario correctly. Instead of making
the reconnect code more complex, consider this as a reconnection
failure.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Sebastian Parschauer <sebastian.riemer@profitbricks.com>
Cc: <stable@vger.kernel.org> #v3.19
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Reception of a DREQ message only causes the state of a single
channel to change. Hence move the 'connected' member variable
from the target to the channel data structure. This patch
avoids that following false positive warning can be reported
by srp_destroy_qp():

WARNING: at drivers/infiniband/ulp/srp/ib_srp.c:617 srp_destroy_qp+0xa6/0x120 [ib_srp]()
Call Trace:
[<ffffffff8106e10f>] warn_slowpath_common+0x7f/0xc0
[<ffffffff8106e16a>] warn_slowpath_null+0x1a/0x20
[<ffffffffa0440226>] srp_destroy_qp+0xa6/0x120 [ib_srp]
[<ffffffffa0440322>] srp_free_ch_ib+0x82/0x1e0 [ib_srp]
[<ffffffffa044408b>] srp_create_target+0x7ab/0x998 [ib_srp]
[<ffffffff81346f60>] dev_attr_store+0x20/0x30
[<ffffffff811dd90f>] sysfs_write_file+0xef/0x170
[<ffffffff8116d248>] vfs_write+0xc8/0x190
[<ffffffff8116d411>] sys_write+0x51/0x90
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Sebastian Parschauer <sebastian.riemer@profitbricks.com>
Cc: <stable@vger.kernel.org> #v3.19
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Avoid that receiving a DREQ while RDMA channels are being
established causes target->qp_in_error to be reset.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Sebastian Parschauer <sebastian.riemer@profitbricks.com>
Cc: <stable@vger.kernel.org> #v3.19
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Fix a scsi_get_host() / scsi_host_put() imbalance in the error
path of srp_create_target(). See also patch "IB/srp: Avoid that
I/O hangs due to a cable pull during LUN scanning" (commit ID
34aa654e).
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Cc: Sebastian Parschauer <sebastian.riemer@profitbricks.com>
Cc: <stable@vger.kernel.org> #v3.19
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Avoid that srp_terminate_io() can get invoked while srp_queuecommand()
is in progress. This patch avoids that an I/O timeout can trigger the
following kernel warning:

WARNING: at drivers/infiniband/ulp/srp/ib_srp.c:1447 srp_terminate_io+0xef/0x100 [ib_srp]()
Call Trace:
 [<ffffffff814c65a2>] dump_stack+0x4e/0x68
 [<ffffffff81051f71>] warn_slowpath_common+0x81/0xa0
 [<ffffffff8105204a>] warn_slowpath_null+0x1a/0x20
 [<ffffffffa075f51f>] srp_terminate_io+0xef/0x100 [ib_srp]
 [<ffffffffa07495da>] __rport_fail_io_fast+0xba/0xc0 [scsi_transport_srp]
 [<ffffffffa0749a90>] rport_fast_io_fail_timedout+0xe0/0xf0 [scsi_transport_srp]
 [<ffffffff8106e09b>] process_one_work+0x1db/0x780
 [<ffffffff8106e75b>] worker_thread+0x11b/0x450
 [<ffffffff81073c64>] kthread+0xe4/0x100
 [<ffffffff814cf26c>] ret_from_fork+0x7c/0xb0

See also patch "scsi_transport_srp: Add transport layer error
handling" (commit ID 29c17324).
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Cc: James Bottomley <JBottomley@Odin.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Sebastian Parschauer <sebastian.riemer@profitbricks.com>
Cc: <stable@vger.kernel.org> #v3.13
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Introduce the helper function srp_wait_for_queuecommand().
Move the definition of scsi_request_fn_active(). Add a comment
above srp_wait_for_queuecommand() that support for scsi-mq needs
to be added.

This patch does not change any functionality. A second call to
srp_wait_for_queuecommand() will be introduced in the next patch.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Cc: James Bottomley <JBottomley@Odin.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Sebastian Parschauer <sebastian.riemer@profitbricks.com>
Cc: <stable@vger.kernel.org> #v3.13
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Return values of 0 do not make sense for functions which return enum
smi_action
Reviewed-By: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Acked-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

is_rmpp_data_mad is more descriptive for this function.
Reviewed-By: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>