- 18 9月, 2005 7 次提交
-
-
由 Heiko Carstens 提交于
Disable preemption in show_cpuinfo to avoid problems and the warning about smp_processor_id. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Martin Schwidefsky 提交于
Got confused with the crypto update. The last patch added a call to destroy_workqueue() for a non-existent workqueue with the comment "Remove device workqueue on module unload". This is nonsense. Remove the offending hunk again. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Heiko Carstens 提交于
Calculate correct size for bl_dev array. It should be 8KB instead of 512KB for 2^16 bits. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Martin Schwidefsky 提交于
Update default configuration of s390. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Richard Purdie 提交于
Add partition definitions for the new Sharp Zaurus models Spitz (SL-C3000), Akita (SL-C1000) and Borzoi (SL-C3100) Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Richard Purdie 提交于
This hunk from the sharpsl/corgi backlight update appears to have got lost somewhere along the way. Its needed to match the other changes. Signed-Off-By: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 H. Peter Anvin 提交于
This patch fixes a signedness bug with RAID6 for Altivec, and makes the Altivec code testable in userspace. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 9月, 2005 9 次提交
-
-
由 Linus Torvalds 提交于
-
由 Karsten Keil 提交于
Signed-off-by: NKarsten Keil <kkeil@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Karsten Keil 提交于
Sitecom DC-105 PCI work with hfc_pci HiSax driver Signed-off-by: NKarsten Keil <kkeil@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Hidetoshi Seto 提交于
There were some trailing white spaces, long lines, brackets in weird style etc. This patch cleans them up. Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Linus Torvalds 提交于
-
由 Al Viro 提交于
[originally sent to Alan, he had no problems with it] - iomem pointers marked as such - several direct dereferencings of such pointers replaced with read[bw](). Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Keith Owens 提交于
Add Documentation/ia64/mca.txt, an ad-hoc collection of notes on IA64 MCA and INIT processing. Signed-off-by: NKeith Owens <kaos@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Linus Torvalds 提交于
-
由 Peter Chubb 提交于
This patch removes some compilation warnings, mostly trivially. acpi.c fix also noted by Kenji Kaneshige. Signed-off-by; Peter Chubb <peterc@gelato.unsw.edu.au> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
- 16 9月, 2005 5 次提交
-
-
由 Jeff Garzik 提交于
Make sure we that completion is the final action we take; prior to this change, another CPU may have changed ap->pio_task_state before we tested it a final time. Spotted by, and original patch by Albert Lee @ IBM. Also includes a minor optimization: eliminate a ton of unnecessary queue_work() calls, simply by jumping to the beginning of the FSM function ata_pio_task().
-
由 Jens Osterkamp 提交于
This patch makes the driver work with any BladeCenter network switch, it used to work only with certain models. Please apply. Signed-off-by: NArnd Bergmann <arndb@de.ibm.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Stephen Hemminger 提交于
Don't crash if ethtool statistics are requested and device is down. Fix is to allocate pci space for statistics only when needed. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Jay Vosburgh 提交于
Bonding leaks route structures when the ARP monitor is configured to send probes over VLANs. Originally reported by Ian Abel <ian.abel@mxtelecom.com>; his original fix was modified by Jay Vosburgh to correct coding style and to close a leak it missed. Signed-off-by: NJay Vosburgh <fubar@us.ibm.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Jeff Garzik 提交于
-
- 15 9月, 2005 19 次提交
-
-
由 Antonino A. Daplas 提交于
In the unlikely case of the new screen width much wider then the old, use (old_row_size * new_rows) instead of new_screen_size to prevent a buffer overrun during the copy. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
Reported by: walt <wa1ter@myrealbox.com> "I routinely switch the console font during bootup to 8x8 so I can get 50 lines per screen. Until 09 Sept, just changing to the small font automatically gave me all 50 lines -- but now I'm only getting 25 lines even with the small font. The bottom half of the screen displays the text that already scrolled off the top." This bug is due to an erroneous check in the recently added hook, vgacon_resize(). It checks the new height against the original number of rows of the console. Because the original number of rows depends on both the scanline and the font height, check it instead against the scanline/fontheight. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
- The Twister chipsets are actually prosavages. Reclassify them as such and remove the S3_SAVAGE_TWISTER id. - Fix i2c code if fb_firmware_edid() returns NULL Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jimi Xenidis 提交于
As noted by Olof Johansson <olof@lixom.net>: "A recent patch changed the way the LPAR bit is checked during early boot. This resulted in a polarity change in a conditional branch without changing the branch, causing at least some legacy machines to not boot." This fixes it. Signed-off-by: NJimi Xenidis <jimix@watson.ibm.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
-
由 Russell King 提交于
Thomas Gleixner reported that mmaping and unmapping each physical page in turn eventually caused the kernel to oops. It appears that pfn_valid() in the discontigmem case was too simplistic for proper operation. Tighten the logic so we also check if the PFN is within the range of the selected memory node. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Richard Purdie 提交于
Patch from Richard Purdie This patch adds MMC and UDC support to the PXA Poodle platform. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Richard Purdie 提交于
Patch from Richard Purdie This patch cleans up the PXA Poodle platform code removing an unneeded static iomap. It also corrects errors in the platform header file and adds a missing GPIO define. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Richard Purdie 提交于
Patch from Richard Purdie This patch cleans up the PXA Corgi platform code removing an unneeded static iomap, an unneeded function and some debug messages. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Richard Purdie 提交于
Patch from Richard Purdie This patch adds a missing parameter to the scoop calls made by collie.c Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
Patch from Lennert Buytenhek It's silly to have I2C enabled in all ixp2000 defconfigs but not to have the ixp2000 bus driver enabled in any of them. This patch enables CONFIG_I2C_IXP2000 for all in-tree ixp2000 boards. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
Patch from Lennert Buytenhek Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
Patch from Lennert Buytenhek The intel docs call it IXP2000_PRODUCT_ID, and we have a definition for IXP2000_PRODUCT_ID as well, so IXP2000_PROD_ID can go. It's only used in one place. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
Patch from Lennert Buytenhek This patch: - changes the ixp2000_reg_write accessor to take a 'volatile void *' instead of a 'volatile unsigned long *', which then allows passing in a u32 * as first argument without being greeted with a warning; and - adds an ixp2000_reg_read accessor. We can then use these accessors in ixp2000 code to access on-chip peripherals, instead of directly dereferencing pointers. This is for use by the ixp2000 microengine driver which was recently announced on netdev. We can't use readl/writel on the ixp2000 since it is usually run in big-endian mode, and on big-endian platforms, readl/writel perform byteswapping. A future patch will remove the readback from ixp2000_reg_write, since it's not needed to prevent erratum #66, and add manual readbacks to the places that need them (writes are not synchronous since we map in device space using XCB=101 nowadays), such as interrupt disabling and GPIO manipulation. See also: http://lists.arm.linux.org.uk/pipermail/linux-arm-kernel/2005-February/027084.html Patch has been ACKed by Jeff Garzik. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Platform classes need not define PFN_TO_NID when DISCONTIGMEM is not selected. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 David S. Miller 提交于
Several implementations were essentialy a common piece of C code using the cmpxchg() macro. Put the implementation in one spot that everyone can share, and convert sparc64 over to using this. Alpha is the lone arch-specific implementation, which codes up a special fast path for the common case in order to avoid GP reloading which a pure C version would require. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Missing acct_update_integrals() and update_mem_hiwater() calls compared to it's native counterpart. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David L Stevens 提交于
per-socket multicast filters were not being applied to all sockets in the case of an exact-match bound address, due to an over-exuberant "return" in the look-up code. Fix below. IPv4 does not have this problem. Thanks to Hoerdt Mickael for reporting the bug. Signed-off-by: NDavid L Stevens <dlstevens@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Anastasov 提交于
ip_vs_ftp when loaded can create NAT connections with unknown client port for passive FTP. For such expectations we lookup with cport=0 on incoming packet but it matches the format of the persistence templates causing packets to other persistent virtual servers to be forwarded to real server without creating connection. Later the reply packets are treated as foreign and not SNAT-ed. This patch changes the connection lookup for packets from clients: * introduce IP_VS_CONN_F_TEMPLATE connection flag to mark the connection as template * create new connection lookup function just for templates - ip_vs_ct_in_get * make sure ip_vs_conn_in_get hits only connections with IP_VS_CONN_F_NO_CPORT flag set when s_port is 0. By this way we avoid returning template when looking for cport=0 (ftp) Signed-off-by: NJulian Anastasov <ja@ssi.bg> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-