- 24 5月, 2007 20 次提交
-
-
由 Andrew Morton 提交于
include/linux/capability.h:397: warning: "struct task_struct" declared inside parameter list include/linux/capability.h:397: warning: its scope is only this definition or declaration, which is probably not what you want Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kristen Carlson Accardi 提交于
Send an uevent to user space to indicate that a media change event has occurred. Signed-off-by: NKristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kristen Carlson Accardi 提交于
Allow user space to determine if a disk supports Asynchronous Notification of media changes. This is done by adding a new sysfs file "capability_flags", which is documented in (insert file name). This sysfs file will export all disk capabilities flags to user space. We also define a new flag to define the media change notification capability. Signed-off-by: NKristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Thomas Gleixner 提交于
The warning in the NOHZ code, which triggers when a CPU goes idle with softirqs pending can fill up the logs quite quickly. Rate limit the output until we found the root cause of that problem. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Brownell 提交于
Update the SPI documentation to cover a few points that have proven to be confusing or unclear; most notably the two clock mode bits. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Domen Puncer 提交于
Fix mpc5200 PSC SPI driver to actually work for CONFIG_PPC_MERGE - s/mpc52xx/mpc5200/, as this was changed in device tree some time ago - fix spi id detection The move from 'ppc' to 'powerpc' didn't quite match the latest kernel.org code. Signed-off-by: NDomen Puncer <domen.puncer@telargo.com> Acked-by: NDragos Carp <dragos.carp@toptica.com> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Miklos Szeredi 提交于
The wrong lookup flag was tested in ->create() causing havoc (error or Oops) when a regular file was created with mknod() in a fuse filesystem. Thanks to J. Cameijo Cerdeira for the report. Kernels 2.6.18 onward are affected. Please apply to -stable as well. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Lameter 提交于
The object size calculation is wrong if !CONFIG_SLUB_DEBUG because the #ifdef CONFIG_SLUB_DEBUG is now switching off the size adjustments for DESTROY_BY_RCU and ctor. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Acked-by: NHugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Thomas Gleixner 提交于
Booting a SMP kernel with maxcpus=1 on a SMP system leads to a hard hang, because ACPI ignores the maxcpus setting and sends timer broadcast info for the offline CPUs. This results in a stuck for ever call to smp_call_function_single() on an offline CPU. Ignore the bogus information and print a kernel error to remind ACPI folks to fix it. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Gautham R Shenoy 提交于
Other than refrigerator, no one else calls frozen_process(). So move it from include/linux/freezer.h to kernel/power/process.c. Also, since a task can be marked as frozen by itself, we don't need to pass the (struct task_struct *p) parameter to frozen_process(). Signed-off-by: NGautham R Shenoy <ego@in.ibm.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Gautham R Shenoy 提交于
This patch fixes the race pointed out by Oleg Nesterov. * Freezer marks a thread as freezeable. * The thread now marks itself PF_NOFREEZE, but it will be frozen on on calling try_to_freeze(). Thus the task is frozen, even though it doesn't want to. * Subsequent thaw_processes() will also fail to thaw the task since it is marked PF_NOFREEZE. Avoid this problem by checking the task's PF_NOFREEZE status in frozen_processes() before marking the task as frozen. Signed-off-by: NGautham R Shenoy <ego@in.ibm.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Nesterov 提交于
kthread() sleeps in TASK_INTERRUPTIBLE state waiting for the first wakeup. In theory, this wakeup may come from freeze_process()->signal_wake_up(), so the task can disappear even before kthread_create() sets its ->comm. Change kthread() to use TASK_UNINTERRUPTIBLE. [akpm@linux-foundation.org: s/BUG_ON/WARN_ON+recover] Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru> Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Cc: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rafael J. Wysocki 提交于
Kernel threads can become userland processes by calling kernel_execve(). In particular, this may happen right after the try_to_freeze_tasks() called with FREEZER_USER_SPACE has returned, so try_to_freeze_tasks() needs to take userspace processes into consideration even if it is called with FREEZER_KERNEL_THREADS. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NPavel Machek <pavel@ucw.cz> Cc: Gautham R Shenoy <ego@in.ibm.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rafael J. Wysocki 提交于
Currently try_to_freeze_tasks() has to wait until all of the vforked processes exit and for this reason every user can make it fail. To fix this problem we can introduce the additional process flag PF_FREEZER_SKIP to be used by tasks that do not want to be counted as freezable by the freezer and want to have TIF_FREEZE set nevertheless. Then, this flag can be set by tasks using sys_vfork() before they call wait_for_completion(&vfork) and cleared after they have woken up. After clearing it, the tasks should call try_to_freeze() as soon as possible. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Cc: Gautham R Shenoy <ego@in.ibm.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rafael J. Wysocki 提交于
If the freezing of tasks fails and a task is preempted in refrigerator() before calling frozen_process(), then thaw_tasks() may run before this task is frozen. In that case the task will freeze and no one will thaw it. To fix this race we can call freezing(current) in refrigerator() along with frozen_process(current) under the task_lock() which also should be taken in the error path of try_to_freeze_tasks() as well as in thaw_process(). Moreover, if thaw_process() additionally clears TIF_FREEZE for tasks that are not frozen, we can be sure that all tasks are thawed and there are no pending "freeze" requests after thaw_tasks() has run. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NPavel Machek <pavel@ucw.cz> Cc: Gautham R Shenoy <ego@in.ibm.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
gcc-4.3: drivers/ide/pci/serverworks.c: In function 'svwks_tune_chipset': drivers/ide/pci/serverworks.c:176: warning: overflow in implicit constant conversion drivers/ide/pci/serverworks.c:190: warning: overflow in implicit constant conversion drivers/ide/pci/serverworks.c:211: warning: overflow in implicit constant conversion drivers/ide/pci/serverworks.c:212: warning: overflow in implicit constant conversion Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Junio C Hamano 提交于
There are a few entries in ata_device_blacklist[] in libata-core.c marked with HORKAGE_NODMA but are missing from drive_blacklist[] in ide-dma.c. This patch makes the lists in sync. Also remove a duplicated entry for "SanDisk SDP3B-64". Signed-off-by: NJunio C Hamano <junkio@cox.net> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dave Jones <davej@redhat.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Mika Kukkonen 提交于
Compiling with '-Wswitch-enum' I noticed following: CC drivers/ide/ide-proc.o drivers/ide/ide-proc.c: In function âproc_ide_read_imodelâ: drivers/ide/ide-proc.c:54: warning: enumeration value âide_etrax100â not handled in switch drivers/ide/ide-proc.c:54: warning: enumeration value âide_acornâ not handled in switch How about the following patch? Signed-off-by: NMika Kukkonen <mikukkon@iki.fi> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Alan Cox 提交于
It turns out from customer reports to Red Hat and some PCI dumps that the MegaIDE in RAID mode doesn't provide the drive tuning data that the serverworks driver expects but sometimes does provide something that fools the code. For the RAID class case skip the oem setup and don't trust the BIOS data. We then tune from scratch and this sorts it out. (This has been confirmed on an afflicted IBM blade) [libata serverworks.c never trusts the BIOS in the first place so is accidentally immune] Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Henry Su 提交于
Add the IDE device ID to atiixp_pci_tbl struct in atiixp.c for ATI SB700. From: Henry Su <henry.su@amd.com> Signed-off-by: NLuugi Marsan <luugi.marsan@amd.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
- 23 5月, 2007 20 次提交
-
-
由 Linus Torvalds 提交于
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [RTNETLINK]: Remove remains of wireless extensions over rtnetlink [RTNETLINK]: Allow changing of subsets of netdevice flags in rtnl_setlink [AF_RXRPC]: Make call state names available if CONFIG_PROC_FS=n [AF_RXRPC]: AF_RXRPC depends on IPv4 [IPSEC]: Fix warnings with casting int to pointer
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (29 commits) USB: Add support for Olimex arm-usb-ocd JTAG interface serial port USB: Add support for Sierra Wireless Aircard 595U USB: ldusb bugfix USB: ftdi_sio: Add USB Product Id for OpenDCC USB: fix ratelimit call semantics USB: handle errors in power/level attribute USB: make the autosuspend workqueue thread freezable USB: Fix USB OHCI Subvendor for Toshiba Portege 4000 USB: usblp: Use correct DMA address in case of probe error USB: Fix debug output of ark3116 USB: Onetouch - switch to using input_dev->dev.parent USB: don't try to kzalloc 0 bytes USB: remove short initial timeout for device descriptor fetch USB: Deref URB after usbmon is done with it USB: Remove duplicate IDs from option card driver USB: auerswald: fix file release handler USB: fsl_usb2_udc: Fix UMTI_WIDE support and a compile warning USB: set the correct Interrupt interval in usb_bulk_msg USB: New device PID for ftdi_sio driver USB: remove unneeded WARN_ON ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ads7846 - SPI_CPHA mode bugfix Input: ads7846 - document that it handles tsc2046 too Input: input-polldev - add module info Input: ucb1x00-ts - remove commented out code Input: ucb1400_ts - use sched_setscheduler() Input: ALPS - force stream mode Input: iforce - minor clean-ups Input: iforce - fix force feedback not working Input: adbhid - do not access input_dev->private directly Input: logips2pp - add type 72 (PS/2 TrackMan Marble)
-
由 Tony Lindgren 提交于
This patch adds support for the serial port on Olimex arm-usb-ocd JTAG interface. The device appears as two serial ports, but the first one is reserved for the JTAG interface. The JTAG interface can be used with OpenOCD from userspace. For more information, please see: http://openocd.berlios.de/web/ http://www.olimex.com/dev/arm-usb-ocd.htmlSigned-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Danny Budik 提交于
This patch adds support for the newly released Aircard 595U EVDO modem to the Sierra Wireless driver (sierra.c) in kernel 2.6.21. I suspect that my mailer may be mangling patches so let me know and I'll try to resend it. From: Danny Budik <dbudik@ist-traffic.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
This patch fixes a problem reported with consecutive reads in the ldusb driver. Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Guido Scholz 提交于
USB product id registration for the OpenDCC (www.opendcc.de) model railway central unit. Applies to 2.6.21.1. Signed-off-by: NGuido Scholz <guido.scholz@bayernline.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as910) fixes a ratelimit modification so that the original error-handling path will be followed even when the log-rate limitation kicks in. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as906) improves the error handling for the USB power/level attribute file. If an error occurs, the original power-level settings will be restored. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as881b) makes the ksuspend_usb_wq workqueue freezable. We don't want a rogue workqueue thread running around, unexpectedly suspending or resuming USB devices in the middle of a system sleep transition. This fixes Bugzilla #8498. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Andrey Borzenkov 提交于
This fixes a bug in an OHCI quirk handler for Portege 4000; the Subvendor is 0x1179 (PCI_VENDOR_ID_TOSHIBA) not 0x102f (PCI_VENDOR_ID_TOSHIBA_2) bugid 8510 00:02.0 USB Controller [0c03]: ALi Corporation USB 1.1 Controller [10b9:5237] (rev 03) (prog-if 10 [OHCI]) Subsystem: Toshiba America Info Systems Unknown device [1179:0004] Flags: bus master, medium devsel, latency 64, IRQ 11 Memory at f7eff000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Signed-off-by: NAndrey Borzenkov <arvidjaar@mail.ru> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Pete Zaitcev 提交于
Looks like the error path had a copy-paste error. The normal exit path uses correct URB already. Signed-off-by: NPete Zaitcev <zaitcev@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jan Engelhardt 提交于
Fix debug output. Previously, it would output "0xFFFFFFB0" on 32-bit archs (and probably "0xFFFFFFFFFFFFFFB0" on 64-bits), because buf is taken as signed char, which is promoted to signed int, while %x always expects an unsigned int. Signed-off-by: NJan Engelhardt <jengelh@gmx.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Dmitry Torokhov 提交于
In preparation for struct class_device -> struct device input core conversion, switch to using input_dev->dev.parent when specifying device position in sysfs tree. Also, do not access input_dev->private directly, use helpers. Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NMatthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as907) prevents us from trying to allocate 0 bytes when an interface has no endpoint descriptors. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as905) removes a micro-optimization from the hub port initialization code. Previously we had been using a short timeout on the first attempt the read the device descriptor; now we will use the standard timeout length. It's not clear that the short timeout ever provided any benefit. And now we know of one case where it actually hurts: The device can't meet the short timeout and then it gets terminally confused. This fixes Bugzilla #8444. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Pete Zaitcev 提交于
I haven't personally run across an oops because of this, but I feel safer with this fix in place. Signed-off-by: NPete Zaitcev <zaitcev@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ben Collins 提交于
Cc: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: NBen Collins <bcollins@ubuntu.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Andrew Morton 提交于
If this down_interruptible() does fail due to signal_pending() then the state of the driver will get trashed in interesting ways, because userspace cannot and will not retry the close(). Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Li Yang 提交于
Change PORT_WIDTH bit for UMTI_WIDE mode and fix a compile warning introduced in last revision. Signed-off-by: NLi Yang <leoli@freescale.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-