Get maximum ethernet MTU and default MAC address from the firmware
QUERY_DEV_CAP command.
Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

For ethernet support, we need to reserve QPs for the ethernet and
fibre channel driver.  The QPs are reserved at the end of the QP
table.  (This way we assure that they are aligned to their size)

We need to consider these reserved ranges in bitmap creation, so we
extend the mlx4 bitmap utility functions to allow reserved ranges at
both the bottom and the top of the range.
Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

To allow allocating an aligned range of consecutive QP numbers, add an
interface to reserve an aligned range of QP numbers and have the QP
allocation function always take a QP number.

This will be used for RSS support in the mlx4_en Ethernet driver and
also potentially by IPoIB RSS support.
Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: skcipher - Use RNG interface instead of get_random_bytes
  crypto: rng - RNG interface and implementation
  crypto: api - Add fips_enable flag
  crypto: skcipher - Move IV generators into their own modules
  crypto: cryptomgr - Test ciphers using ECB
  crypto: api - Use test infrastructure
  crypto: cryptomgr - Add test infrastructure
  crypto: tcrypt - Add alg_test interface
  crypto: tcrypt - Abort and only log if there is an error
  crypto: crc32c - Use Intel CRC32 instruction
  crypto: tcrypt - Avoid using contiguous pages
  crypto: api - Display larval objects properly
  crypto: api - Export crypto_alg_lookup instead of __crypto_alg_lookup
  crypto: Kconfig - Replace leading spaces with tabs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (29 commits)
  RDMA/nes: Fix slab corruption
  IB/mlx4: Set RLKEY bit for kernel QPs
  RDMA/nes: Correct error_module bit mask
  RDMA/nes: Fix routed RDMA connections
  RDMA/nes: Enhanced PFT management scheme
  RDMA/nes: Handle AE bounds violation
  RDMA/nes: Limit critical error interrupts
  RDMA/nes: Stop spurious MAC interrupts
  RDMA/nes: Correct tso_wqe_length
  RDMA/nes: Fill in firmware version for ethtool
  RDMA/nes: Use ethtool timer value
  RDMA/nes: Correct MAX TSO frags value
  RDMA/nes: Enable MC/UC after changing MTU
  RDMA/nes: Free NIC TX buffers when destroying NIC QP
  RDMA/nes: Fix MDC setting
  RDMA/nes: Add wqm_quanta module option
  RDMA/nes: Module parameter permissions
  RDMA/cxgb3: Set active_mtu in ib_port_attr
  RDMA/nes: Add support for 4-port 1G HP blade card
  RDMA/nes: Make mini_cm_connect() static
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  dlm: choose better identifiers
  dlm: remove bkl
  dlm: fix address compare
  dlm: fix locking of lockspace list in dlm_scand
  dlm: detect available userspace daemon
  dlm: allow multiple lockspace creates

* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm:
  dm: detect lost queue
  dm: publish dm_vcalloc
  dm: publish dm_table_unplug_all
  dm: publish dm_get_mapinfo
  dm: export struct dm_dev
  dm crypt: avoid unnecessary wait when splitting bio
  dm crypt: tidy ctx pending
  dm crypt: fix async inc_pending
  dm crypt: move dec_pending on error into write_io_submit
  dm crypt: remove inc_pending from write_io_submit
  dm crypt: tidy write loop pending
  dm crypt: tidy crypt alloc
  dm crypt: tidy inc pending
  dm exception store: use chunk_t for_areas
  dm exception store: introduce area_location function
  dm raid1: kcopyd should stop on error if errors handled
  dm mpath: remove is_active from struct dm_path
  dm mpath: use more error codes

Fixed up trivial conflict in drivers/md/dm-mpath.c manually.

Currently we disable barriers as soon as we get a buffer in xlog_iodone
that has the XBF_ORDERED flag cleared.  But this can be the case not only
for buffers where the barrier failed, but also the first buffer of a
split log write in case of a log wraparound.  Due to the disabled
barriers we can easily get directory corruption on unclean shutdowns.
So instead of using this check add a new buffer flag for failed barrier
writes.

This is a regression vs 2.6.26 caused by patch to use the right macro
to check for the ORDERED flag, as we previously got true returned for
every buffer.

Thanks to Toei Rei for reporting the bug.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NEric Sandeen <sandeen@sandeen.net>
Reviewed-by: NDavid Chinner <david@fromorbit.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw:
  GFS2: Support for I/O barriers
  GFS2: Add UUID to GFS2 sb
  GFS2: high time to take some time over atime
  GFS2: The war on bloat
  GFS2: GFS2 will panic if you misspell any mount options
  GFS2: Direct IO write at end of file error
  GFS2: Use an IS_ERR test rather than a NULL test
  GFS2: Fix race relating to glock min-hold time
  GFS2: Fix & clean up GFS2 rename
  GFS2: rm on multiple nodes causes panic
  GFS2: Fix metafs mounts
  GFS2: Fix debugfs glock file iterator

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (37 commits)
  [SCSI] zfcp: fix double dbf id usage
  [SCSI] zfcp: wait on SCSI work to be finished before proceeding with init dev
  [SCSI] zfcp: fix erp list usage without using locks
  [SCSI] zfcp: prevent fc_remote_port_delete calls for unregistered rport
  [SCSI] zfcp: fix deadlock caused by shared work queue tasks
  [SCSI] zfcp: put threshold data in hba trace
  [SCSI] zfcp: Simplify zfcp data structures
  [SCSI] zfcp: Simplify get_adapter_by_busid
  [SCSI] zfcp: remove all typedefs and replace them with standards
  [SCSI] zfcp: attach and release SAN nameserver port on demand
  [SCSI] zfcp: remove unused references, declarations and flags
  [SCSI] zfcp: Update message with input from review
  [SCSI] zfcp: add queue_full sysfs attribute
  [SCSI] scsi_dh: suppress comparison warning
  [SCSI] scsi_dh: add Dell product information into rdac device handler
  [SCSI] qla2xxx: remove the unused SCSI_QLOGIC_FC_FIRMWARE option
  [SCSI] qla2xxx: fix printk format warnings
  [SCSI] qla2xxx: Update version number to 8.02.01-k8.
  [SCSI] qla2xxx: Ignore payload reserved-bits during RSCN processing.
  [SCSI] qla2xxx: Additional residual-count corrections during UNDERRUN handling.
  ...

* 'for-2.6.28' of git://git.kernel.dk/linux-2.6-block: (132 commits)
  doc/cdrom: Trvial documentation error, file not present
  block_dev: fix kernel-doc in new functions
  block: add some comments around the bio read-write flags
  block: mark bio_split_pool static
  block: Find bio sector offset given idx and offset
  block: gendisk integrity wrapper
  block: Switch blk_integrity_compare from bdev to gendisk
  block: Fix double put in blk_integrity_unregister
  block: Introduce integrity data ownership flag
  block: revert part of d7533ad0e132f92e75c1b2eb7c26387b25a583c1
  bio.h: Remove unused conditional code
  block: remove end_{queued|dequeued}_request()
  block: change elevator to use __blk_end_request()
  gdrom: change to use __blk_end_request()
  memstick: change to use __blk_end_request()
  virtio_blk: change to use __blk_end_request()
  blktrace: use BLKTRACE_BDEV_SIZE as the name size for setup structure
  block: add lld busy state exporting interface
  block: Fix blk_start_queueing() to not kick a stopped queue
  include blktrace_api.h in headers_install
  ...

This merges phase 1 of the x86 tree, which is a collection of branches:

  x86/alternatives, x86/cleanups, x86/commandline, x86/crashdump,
  x86/debug, x86/defconfig, x86/doc, x86/exports, x86/fpu, x86/gart,
  x86/idle, x86/mm, x86/mtrr, x86/nmi-watchdog, x86/oprofile,
  x86/paravirt, x86/reboot, x86/sparse-fixes, x86/tsc, x86/urgent and
  x86/vmalloc

and as Ingo says: "these are the easiest, purely independent x86 topics
with no conflicts, in one nice Octopus merge".

* 'x86-v28-for-linus-phase1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (147 commits)
  x86: mtrr_cleanup: treat WRPROT as UNCACHEABLE
  x86: mtrr_cleanup: first 1M may be covered in var mtrrs
  x86: mtrr_cleanup: print out correct type v2
  x86: trivial printk fix in efi.c
  x86, debug: mtrr_cleanup print out var mtrr before change it
  x86: mtrr_cleanup try gran_size to less than 1M, v3
  x86: mtrr_cleanup try gran_size to less than 1M, cleanup
  x86: change MTRR_SANITIZER to def_bool y
  x86, debug printouts: IOMMU setup failures should not be KERN_ERR
  x86: export set_memory_ro and set_memory_rw
  x86: mtrr_cleanup try gran_size to less than 1M
  x86: mtrr_cleanup prepare to make gran_size to less 1M
  x86: mtrr_cleanup safe to get more spare regs now
  x86_64: be less annoying on boot, v2
  x86: mtrr_cleanup hole size should be less than half of chunk_size, v2
  x86: add mtrr_cleanup_debug command line
  x86: mtrr_cleanup optimization, v2
  x86: don't need to go to chunksize to 4G
  x86_64: be less annoying on boot
  x86, olpc: fix endian bug in openfirmware workaround
  ...

We already did that a long time ago for pnp_system_init, but
pnpacpi_init and pnpbios_init remained as subsys_initcalls, and get
linked into the kernel before the arch-specific routines that finalize
the PCI resources (pci_subsys_init).

This means that the PnP routines would either register their resources
before the PCI layer could, or would be unable to check whether a PCI
resource had already been registered.  Both are problematic.

I wanted to do this before 2.6.27, but every time we change something
like this, something breaks.  That said, _every_ single time we trust
some firmware (like PnP tables) more than we trust the hardware itself
(like PCI probing), the problems have been worse.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'upstream-2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  ata_piix: IDE Mode SATA patch for Intel Ibex Peak DeviceIDs
  libata-eh: clear UNIT ATTENTION after reset
  ata_piix: add Hercules EC-900 mini-notebook to ich_laptop short cable list
  libata: reorder ata_device to remove 8 bytes of padding on 64 bits
  [libata] pata_bf54x: Add proper PM operation
  pata_sil680: convert CONFIG_PPC_MERGE to CONFIG_PPC
  libata: Implement disk shock protection support
  [libata] Introduce ata_id_has_unload()
  PATA: RPC now selects HAVE_PATA_PLATFORM for pata platform driver
  ata_piix: drop merged SCR access and use slave_link instead
  libata: implement slave_link
  libata: misc updates to prepare for slave link
  libata: reimplement link iterator
  libata: make SCR access ops per-link

Detect and report buggy drivers that destroy their request_queue.
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Cc: Stefan Raspl <raspl@linux.vnet.ibm.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>

Publish dm_vcalloc in include/linux/device-mapper.h because this function is
used by targets.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Publish dm_table_unplug_all in include/linux/device-mapper.h because this
function is used by targets.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Publish dm_get_mapinfo in include/linux/device-mapper.h because this function
is used by targets.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Split struct dm_dev in two and publish the part that other targets need in
include/linux/device-mapper.h.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Don't wait between submitting crypt requests for a bio unless
we are short of memory.

There are two situations when we must split an encrypted bio:
  1) there are no free pages;
  2) the new bio would violate underlying device restrictions
(e.g. max hw segments).

In case (2) we do not need to wait.

Add output variable to crypt_alloc_buffer() to distinguish between
these cases.
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Move the initialisation of ctx->pending into one place, at the
start of crypt_convert().

Introduce crypt_finished to indicate whether or not the encryption
is finished, for use in a later patch.

No functional change.
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

The pending reference count must be incremented *before* the async work is
queued to another thread, not after.  Otherwise there's a race if the
work completes and decrements the reference count before it gets incremented.
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Make kcryptd_crypt_write_io_submit() responsible for decrementing
the pending count after an error.

Also fixes a bug in the async path that forgot to decrement it.
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Make the caller reponsible for incrementing the pending count before calling
kcryptd_crypt_write_io_submit() in the non-async case to bring it into line
with the async case.
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Move kcryptd_crypt_write_convert_loop inside kcryptd_crypt_write_convert.
This change is needed for a later patch.

No functional change.
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Factor out crypt io allocation code.
Later patches will call it from another place.

No functional change.
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Move io pending to one place.

No functional change, usefull to simplify debugging.
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Change uint32_t into chunk_t to remove 32-bit limitation on the
number of chunks on systems with 64-bit sector numbers.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Move this logic to a function, because it will be reused later.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

dm-raid1 is setting the 'DM_KCOPYD_IGNORE_ERROR' flag unconditionally
when assigning kcopyd work.  kcopyd is responsible for copying an
assigned section of disk to one or more other disks.  The
'DM_KCOPYD_IGNORE_ERROR' flag affects kcopyd in the following way:

When not set:
kcopyd will immediately stop the copy operation when an error is
encountered.

When set:
kcopyd will try to proceed regardless of errors and try to continue
copying any remaining amount.

Since dm-raid1 tracks regions of the address space that are (or
are not) in sync and it now has the ability to handle these
errors, we can safely enable this optimization.  This optimization
is conditional on whether mirror error handling has been enabled.
Signed-off-by: NJonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

This patch moves 'is_active' from struct dm_path to struct pgpath
as it does not need exporting.
Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

This patch allows path errors from the multipath ctr function to
propagate up to userspace as errno values from the ioctl() call.

This is in response to
  https://www.redhat.com/archives/dm-devel/2008-May/msg00000.html
and
  https://bugzilla.redhat.com/show_bug.cgi?id=444421

The patch only lets through the errors that it needs to in order to
get the path errors from parse_path().
Signed-off-by: NBenjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

The sbpcd tester program is not included in the kernel source tree,
so remove the reference to it.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Reported-by: NNick Warne <nick@ukfsn.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Merge branches 'cma', 'cxgb3', 'ehca', 'ipath', 'ipoib', 'mad', 'misc', 'mlx4', 'mthca' and 'nes' into for-next

Referencing cm_node after it is freed via rem_ref_cm_node() causes a
slab corruption.  There is no need to set cm_node->cm_id to NULL in
mini_cm_close().
Signed-off-by: NChien Tung <ctung@neteffect.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

This is debatable, but while we're debating it, let's disallow the
combination of splice and an O_APPEND destination.

It's not entirely clear what the semantics of O_APPEND should be, and
POSIX apparently expects pwrite() to ignore O_APPEND, for example.  So
we could make up any semantics we want, including the old ones.

But Miklos convinced me that we should at least give it some thought,
and that accepting writes at arbitrary offsets is wrong at least for
IS_APPEND() files (which always have O_APPEND set, even if the reverse
isn't true: you can obviously have O_APPEND set on a regular file).

So disallow O_APPEND entirely for now.  I doubt anybody cares, and this
way we have one less gray area to worry about.
Reported-and-argued-for-by: NMiklos Szeredi <miklos@szeredi.hu>
Acked-by: NJens Axboe <ens.axboe@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  hwmon: (abituguru3) Enable DMI probing feature on Abit AT8 32X
  hwmon: (abituguru3) Enable reading from AUX3 fan on Abit AT8 32X
  hwmon: (adt7473) Fix some bogosity in documentation file
  hwmon: Define sysfs interface for energy consumption register
  hwmon: (it87) Prevent power-off on Shuttle SN68PT
  eeepc-laptop: Fix hwmon interface

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] correct broken links and email addresses

This fixes the previous fix, which was completely wrong on closer
inspection. This version has been manually tested with a user-space
test harness and generates sane values. A nearly identical patch has
been boot-tested.

The problem arose from changing how kmalloc/kfree handled alignment
padding without updating ksize to match. This brings it in sync.
Signed-off-by: NMatt Mackall <mpm@selenic.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>