Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Commit 779e7d41 created a name collision
in SMTC builds.  The attached patch corrects this in a a
not-too-terribly-ugly manner.  Note that the SMTC case has to come
first, because CEVT_R4K will also be true.
Signed-off-by: NKevin D. Kissell <kevink@paralogos.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NKevin D. Kissell <kevink@paralogos.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6:
  xtensa: Fix linker script to include .literal sections
  xtensa: update s6105_defconfig for ccount calibration
  xtensa: implement ccount calibration for s6000
  xtensa: fix wrong extern declaration renamed in code using it
  xtensa: register gpio chip before use
  xtensa: always use correct stack pointer for stack traces
  xtensa: Fix checksum header file
  xtensa: Fix architecture specific Kconfig

* git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus:
  Squashfs: cody tidying, remove commented out line in Makefile
  Squashfs: check page size is not larger than the filesystem block size
  Squashfs: fix breakage when page size > metadata block size

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: destroy bdi on error

* 'kvm-updates/2.6.30' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: SVM: Remove port 80 passthrough
  KVM: Make EFER reads safe when EFER does not exist
  KVM: Fix NX support reporting
  KVM: SVM: Fix cross vendor migration issue with unusable bit

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: check size of array structured data exchanged via ioctls
  nilfs2: fix lock order reversal in nilfs_clean_segments ioctl
  nilfs2: fix possible circular locking for get information ioctls
  nilfs2: ensure to clear dirty state when deleting metadata file block
  nilfs2: fix circular locking dependency of writer mutex
  nilfs2: fix possible recovery failure due to block creation without writer

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/mlx4: Don't overwrite fast registration page list when posting work request
  RDMA/cxgb3: Don't complete flushed send work requests twice

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-2.6:
  drm/i915: automatically select FRAMEBUFFER_CONSOLE if !EMBEDDED

This reverts commit a425a638.

Now that the previous commit removed the "readpage" actor for hugetlb
files, read-ahead will no longer mess up the mapping, and there's no
longer any reason to treat hugetlbfs mappings specially.
Tested-and-acked-by: NMel Gorman <mel@csn.ul.ie>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The core VM assumes the page size used by the address_space in
inode->i_mapping is PAGE_SIZE but hugetlbfs breaks this assumption by
inserting pages into the page cache at offsets the core VM considers
unexpected.

This would not be a problem except that hugetlbfs also provide a
->readpage implementation.  As it exists, the core VM can assume the
base page size is being used, allocate pages on behalf of the
filesystem, insert them into the page cache and call ->readpage to
populate them.  These pages are the wrong size and at the wrong offset
for hugetlbfs causing confusion.

This patch deletes the ->readpage implementation for hugetlbfs on the
grounds the core VM should not be allocating and populating pages on
behalf of hugetlbfs.  There should be no existing users of the
->readpage implementation so it should not cause a regression.
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NPhillip Lougher <phillip@lougher.demon.co.uk>

Normally the block size (by default 128K) will be larger than the
page size, unless a non-standard block size has been specified in
Mksquashfs, and the page size is larger than 4K.
Signed-off-by: NPhillip Lougher <phillip@lougher.demon.co.uk>

Squashfs is broken on any system where the page size is larger than
the metadata size (8192).  This is easily fixed by ensuring cache->pages
is always > 0.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NDoug Chapman <doug.chapman@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NPhillip Lougher <phillip@lougher.demon.co.uk>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: add NOGET quirk for devices from CH Products
  HID: fix dropped device-specific quirks

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
  dma: fix ipu_idmac.c to not discard the last queued buffer
  ioatdma: fix "ioatdma frees DMA memory with wrong function"
  ipu_idmac: Use disable_irq_nosync() from within irq handlers.
  dmatest: fix max channels handling

* 'for-2.6.30' of git://linux-nfs.org/~bfields/linux:
  nfsd: silence lockdep warning
  lockd: fix list corruption on lockd restart
  nfsd4: check for negative dentry before use in nfsv4 readdir
  nfsd41: slots are freed with session
  svcrdma: clean up error paths.
  svcrdma: Fix dma map direction for rdma read targets

This also fixes the case of a single queued buffer, for example, when taking a
single frame snapshot with the mx3_camera driver.
Reported-by: NAgustin Ferrin Pozuelo <gatoguan-os@yahoo.com>
Tested-by: NAgustin Ferrin Pozuelo <gatoguan-os@yahoo.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

as reported by Alexander Beregalov <a.beregalov@gmail.com>

ioatdma 0000:00:08.0: DMA-API: device driver frees DMA memory with
wrong function [device address=0x000000007f76f800] [size=2000 bytes]
[map
ped as single] [unmapped as page]

The ioatdma driver was unmapping all regions
(either allocated as page or single) using unmap_page.
This patch lets dma driver recognize if unmap_single or unmap_page should be used.
It introduces two new dma control flags:
DMA_COMPL_SRC_UNMAP_SINGLE and DMA_COMPL_DEST_UNMAP_SINGLE.
They should be set to indicate dma driver to do dma-unmapping as single
(first one for the source, tha latter for the destination).
If respective flag is not set, the driver assumes dma-unmapping as page.
Signed-off-by: NMaciej Sosnowski <maciej.sosnowski@intel.com>
Reported-by: NAlexander Beregalov <a.beregalov@gmail.com>
Tested-by: NAlexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Fix a size check WRT the manual pages.  This was inadvertently broken by
commit 9fe5ad9c ("flag parameters
add-on: remove epoll_create size param").
Signed-off-by: NDavide Libenzi <davidel@xmailserver.org>
Cc: <Hiroyuki.Mach@gmail.com>
Cc: rohit verma <rohit.170309@gmail.com>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix a bug in viafb on x86_64 builds (e.g. for VIA Nano CPU).

You cannot make the assumption that sizeof(unsigned int) ==
sizeof(unsigned long), so the parsing of the default mode (640x480) fails,
leading to a division by zero during insmod of the driver.
Signed-off-by: NHarald Welte <HaraldWelte@viatech.com>
Cc: <JosephChan@via.com.tw>
Cc: <ScottFang@viatech.com.cn>
Cc: Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The required I2C modules are now selected automatically by the means
of select statements in Kconfig, so there is no point in confusing the
users with options he/she would be supposed to enable manually.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 9b8de747 ("FRV: Fix the section
attribute on UP DECLARE_PER_CPU()") cleaned up DECLARE/DEFINE_PER_CPU()
macros and in the process made alpha percpu.h include
include/asm-generic/percpu.h which breaks compilation due to duplicate
definitions.

Remove inclusion of generic asm helper file and define whatever necessary
in alpha header proper.

In the longer term, percpu definitions will be unified and all these
little subtlties will be removed.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch enables the alarm interrupt of TWL4030 RTC to wake up the
system from suspend. You can test this patch with following command.

# echo +10 > /sys/class/rtc/rtc0/wakealarm; echo mem > /sys/power/state;
Signed-off-by: NKim Kyuwon <q1.kim@samsung.com>
Acked-by: NDavid Brownell <david-b@pacbell.net>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In order to build the generic syscall table, we need a declaration for
every system call.  sys_pipe2 was added without a proper declaration, so
add this to syscalls.h now.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

setup() may fail before ctldata is set, causing a kernel panic on
cleanup().
Signed-off-by: NDaniel Ribeiro <drwyrm@gmail.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'i2c-for-2630-rc5' of git://aeryn.fluff.org.uk/bjdooks/linux:
  i2c-cpm: Pass dev ptr to dma_*_coherent rather than NULL
  i2c: Enable i2c-s3c2410 for S3C64XX too
  i2c-mpc: bug fix for MPC52xx clock setting and printout
  i2c-pxa.c: timeouts off by 1

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: tsc2007 - fix locking in hrtimer handler
  Input: atkbd - add force release keys quirk for Amilo Xi 3650
  Input: ff-memless - fix signed to unsigned bit overflow
  Input: joydev - blacklist digitizers

People keep getting bitten by this, so just auto-select it by default,
assuming most configurations will actually want a console.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Remove the return after the goto.  We want the goto because it frees
memory as well as returning err.

Found by smatch (http://repo.or.cz/w/smatch.git).
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix resembles implementation from Marc Gauthier and Piet Denaly:

In the Xtensa architecture, assembly generates literals which must always
precede the code (the L32R instruction that loads them only uses negative
PC-relative offsets).  For any *.text section, literals are placed in a
corresponding *.literal section.  The linker script (vmlinux.lds) must
place these in the correct order.  It must also combine them, when the
*.text section can be larger than L32R's 256 kB range.

For example, this doesn't work:  *(.literal) *(.text) because L32R
instructions at the end of .text can't reach the literals.

The linker can solve this if they are combined in parentheses, like this:
       *(.literal .text)
because it is now allowed mix literals in .text to bring them in range.

None of this is done by standard vmlinux.lds.h macros such as TEXT_TEXT
and INIT_TEXT.  To avoid replicating the logic of that header file, we
instead post-process the generated linker script to convert *(xxx.text)
to *(xxx.literal xxx.text) for the following text sections:
       .text .ref.text .*init.text .*exit.text .text.*
using a sed script.  To do this we must override the default rule for
vmlinux.lds (see scripts/Makefile.build and the top-level Makefile)
to insert this extra step.
Signed-off-by: NMarc Gauthier <marc@tensilica.com>
Signed-off-by: NPete Delaney <piet@tensilica.com>
Signed-off-by: NChris Zankel <chris@zankel.net>

The previous patch enabled ccount calibration for the s6000 variant.
This patch updates the defconfig for the s6105 platform to reflect this
change.
Signed-off-by: NOskar Schirmer <os@emlix.com>
Signed-off-by: NChris Zankel <chris@zankel.net>

Calculate core frequency from timers at boot time
instead of assuming a fixed frequency. This is
useful as the true frequency is set up by the
boot loader, thus variable.
Signed-off-by: NOskar Schirmer <os@emlix.com>
Signed-off-by: NChris Zankel <chris@zankel.net>

The variable ccount_nsec has been renamed to nsec_per_ccount
in arch/xtensa/kernel/time.c in 2b8aea74 (2007-08-05),
but the fix failed to rename the variable in
arch/xtensa/include/asm/timex.h as well.
Signed-off-by: NOskar Schirmer <os@emlix.com>
Signed-off-by: NChris Zankel <chris@zankel.net>

Platform initialization sets up the LED heartbeat that is controlled
via GPIO.  Requesting the GPIO pins fails, however, as the chip is
only initialized later by a device_initcall().

Fix this up by exporting the initialization function.  Let the
platform set up the chip before it starts using it.
Signed-off-by: NJohannes Weiner <jw@emlix.com>
Signed-off-by: NChris Zankel <chris@zankel.net>

Commit '28a0ce7f xtensa: use correct stack pointer for stack traces'
changed the stack tracer from always reading the stack pointer
register to always using the saved value in the task descriptor.

The author was too dense to consider the fact that the saved stack
value is stale for a running process und thus unusable for 'current'.

What we do now is to use the stack pointer register (a1) for when the
task is unknown - we can't help it then - or when the task is
'current'.  For everything else use the saved stack pointer value
contained in the task descriptor.
Signed-off-by: NJohannes Weiner <jw@emlix.com>
Signed-off-by: NChris Zankel <chris@zankel.net>

We need to add a "memory" dependency (barrier) in assembly macros
that access (read or write) memory. Otherwise, the compiler might
ill-optimize the order of memory accesses.
Signed-off-by: NChris Zankel <chris@zankel.net>

Move a misplace endmenu marker to enable platform options and
disable PCI and automatic calibrating for the XT2K board. The
on-board PCI bridge is somewhat broken, anyway, and the
calibrating relies on some whacky usage of the serial port.
Signed-off-by: NChris Zankel <chris@zankel.net>