- 27 6月, 2009 1 次提交
-
-
由 Nicolas Ferre 提交于
Here are the at91 specific files dedicated to the at91sam9g45 series. They mimic the traditional at91 way of managing chips & boards. The first board that embeds at91sam9g45 chip is the AT91SAM9G45-EKES. In the future, the main board for this 9g45 series will be the AT91SAM9M10G45-EK (I choose this last name for the board file). Simple drivers are enabled in _devices and board- files. Newer peripheral support will be added in future patches. Incuded peripherals support (for now): - USART - SPI - Ethernet - NAND flash - LCD - gpio/joystick/buttons - leds and pwm Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 02 12月, 2008 2 次提交
-
-
由 Andrew Victor 提交于
Add support for the Adeneo NeoCore 926 board. Signed-off-by: NGuillaume GARDET <guillaume.gardet@free.fr> Signed-off-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
Add a structure 'sam9_smc_config' and function sam9_smc_configure() to allow the board-specific files to specify the configuration of the Static Memory Controller per chip-select. This allows the board file to specify timings for NAND flash, NOR flash or other external peripherals. This functionality can be used for all the SAM9 and CAP9 processors. (the AT91RM9200 has a different memory-controller) This patch is based on similar code in the AVR32 architecture. Signed-off-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 22 9月, 2008 1 次提交
-
-
由 Andrew Victor 提交于
This patch adds support for a low(er)-power suspend-to-RAM. In addition to the SDRAM being put into self-refresh mode, the Master Clock is set to the Slow-clock rate (32Khz) and PLLA & PLLB are disabled. Certain peripherals are therefore also disabled, and thus cannot be used as wakeup sources. This patch has been included in the AT91 patches in various forms since 2.6.19 and a number of people have worked or commented on it, most notably: Savin Zlobec (for the original AT91RM9200 support) Anti Sullin (for the SAM9260 version) David Brownell, etc. Signed-off-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 19 9月, 2008 1 次提交
-
-
由 Sergey Lapin 提交于
This patch adds support for AT91SAM9260-based board AFEB9260 which is a product from both Open Source design which runs Open Source software. Some commertial projects are made with this design. A board is basically AT91SAM9260-EK with some modifications and different peripherals and different parts used. Main purpose of this project is to gain experience in hardware design. More info: http://groups.google.com/group/arm9fpga-evolution-board (In Russian only, sorry). Subversion repository: svn://194.85.238.22/home/users/george/svn/arm9eb By this patch only basic functionality is provided. Signed-off-by: NSergey Lapin <slapin@ossfans.org> Acked-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 10 7月, 2008 1 次提交
-
-
由 sedji gaouaou 提交于
Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC. AT91sam9g20 is an evolution of the at91sam9260 with a faster clock speed. We created a new board for this device but based the chip support directly on 9260 files with little updates. Here is the chip page on Atmel wabsite: http://atmel.com/dyn/products/product_card.asp?part_id=4337Signed-off-by: NSedji Gaouaou <sedji.gaouaou@atmel.com> Signed-off-by: NJustin Waters <justin.waters@timesys.com> Acked-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 02 6月, 2008 2 次提交
-
-
由 Andrew Victor 提交于
Add support for three AT91-based boards available from Calao Systems: USB_A9260, USB_A9263 and QIL_A9260. Signed-off-by: NGrégory Hermant <gregory.hermant@calao-systems.com> Signed-off-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
Cleanup the YL9200 board-support file. Other things fixed are: - Use new-style UART initialization - Register all LEDs as gpio_leds. - NOR Flash error noted in comments fixed by increasing YL9200_FLASH_SIZE - The only I2C device is the AT24C eeprom. - Setup of NWAIT pin and programming of SMC controller for the LCD/VGA. - Configure touchscreen interrupt pin. Also adding the board to the KConfig and Makefile. Signed-off-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 17 4月, 2008 3 次提交
-
-
由 Andrew Victor 提交于
Support for the emQbit ECB_AT91 board. <http://wiki.emqbit.com/free-ecb-at91> Original patch from Nelson Castillo. Signed-off-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
Support for the Olimex SAM9-L9260 board. <http://www.olimex.com/dev/sam9-L9260.html> Original patch from Ivan Vasilev. Signed-off-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
Support for the Kwikbyte KB9260 (CAM60) board. <http://www.kwikbyte.com/KB9260.html> Original patch from Kwikbyte. Signed-off-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 26 1月, 2008 4 次提交
-
-
由 Andrew Victor 提交于
Add support for the Atmel AT91CAP9A-DK Evaluation Kit board. Signed-off-by: NStelian Pop <stelian@popies.net> Signed-off-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
Add support for Atmel's AT91CAP9 Customizable Microcontroller family. <http://www.atmel.com/products/AT91CAP/Default.asp> Signed-off-by: NStelian Pop <stelian@popies.net> Signed-off-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
Move the LED initialization code out of the various *_devices.c files, and into leds.c. Also add support for NEW_LEDs. Patch from David Brownell. Signed-off-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
Cleanup the main AT91 makefile. Signed-off-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 13 10月, 2007 1 次提交
-
-
由 Greg Ungerer 提交于
Makefile build support for the Atmel AT91x40 CPU and EB01 board support. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Acked-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 12 5月, 2007 3 次提交
-
-
由 Andrew Victor 提交于
Add support for the Atmel AT91SAM9RL-EK development board. Signed-off-by: NNicolas Ferre <nicolas.ferre@rfo.atmel.com> Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
Add support for Atmel's new AT91SAM9RL range of processors. Includes similar peripherals as other AT91SAM9 processors, but with a High-speed USB controller and various sizes of internal SRAM. Signed-off-by: NNicolas Ferre <nicolas.ferre@rfo.atmel.com> Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
Attached you can find a patch needed to make the LEDS for 'CPU-Idle' and 'Timer' work on the AT91SAM9261-EK board. The kernel configuration options are already there, but the implementation is not available. Signed-off-by: NRemy Bohmer <l.pinguin@gmail.com> Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 22 4月, 2007 1 次提交
-
-
由 Simon Richter 提交于
Add the picotux 200 ARM board: - Enable its machine type in the filter in head.S - Add configuration option - Add board initialisation - Add default configuration Signed-off-by: NSimon Richter <Simon.Richter@kleinhenz.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 08 2月, 2007 3 次提交
-
-
由 Andrew Victor 提交于
Add support for the Atmel AT91SAM9263-EK board. Original patch from Nicolas Ferre. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
Add support for the Atmel AT91SAM9263 processor. It is similar to the AT91SAM9260 but with more integrated peripherals, 5 GPIO banks, etc. Original patch from Nicolas Ferre. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
Now that Linux includes support for the Atmel AT91SAM9260 and AT91SAM9261 processors in addition to the original Atmel AT91RM9200 (with support for more AT91 processors pending), the "mach-at91rm9200" and "arch-at91rm9200" directories should be renamed to indicate their more generic nature. The following git commands should be run BEFORE applying this patch: git-mv arch/arm/mach-at91rm9200 arch/arm/mach-at91 git-mv include/asm-arm/arch-at91rm9200 include/asm-arm/arch-at91 Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 02 12月, 2006 2 次提交
-
-
由 Andrew Victor 提交于
This patch adds support for the Atmel AT91SAM9261-EK board. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
This patch adds support for the Atmel AT91SAM9260-EK board. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 01 12月, 2006 5 次提交
-
-
由 Andrew Victor 提交于
This patch includes a number of small changes for integrating the AT91SAM9261 and AT91SAM0260 support. * Can only select support for one AT91 processor at a time. * Remove most of the remaining static memory mapping for the AT91RM9200. * Reserve 1Mb of memory below the IO for mapping the internal SRAM and any custom board-specific devices (ie, FPGA). * The SAM9260 has more serial ports, so increase the maximum to 7. * Define the standard chipselect addresses, and define other addresses relative to those. * CLOCK_TICK_RATE is different on the SAM926x's. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
This patch includes the pin initialization, resource definition and registration of the platform_devices for the SAM9260 and SAM9261 processors. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
Add support for the timer on the Atmel AT91SAM9261 and AT91SAM9260 processors. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
This patch adds the initial support for the newer Atmel AT91SAM9261 and AT91SAM9260 processors. The code is based on, and makes use of, the existing AT91RM9200 support. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
This patch renames the arch/arm/mach-at91rm9200/devices.c file to at91rm9200_devices.c. The file contains AT91RM9200-specific code, so we will need separate files for the SAM9 processors. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 29 6月, 2006 1 次提交
-
-
由 Andrew Victor 提交于
Patch from Andrew Victor This prepares the way for adding support for the new Atmel AT91SAM926x processors. Major changes: - Rename time.c to at91rm9200_time.c - Rename common.c to at91rm9200.c - Introduce ARCH_AT91, of which ARCH_AT91RM9200, ARCH_AT91SAM9260 and ARCH_AT91SAM9261 are dependent. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 27 6月, 2006 1 次提交
-
-
由 Lennert Buytenhek 提交于
Patch from Lennert Buytenhek This patch adds support for the Ajeco 1ARM Single Board Computer, a VME form factor SBC based on the Atmel AT91 SoC, with 64M RAM, seven serial ports, three ethernet ports, IDE, CF, USB host and device, and S-Video/VGA out.-- Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 21 6月, 2006 2 次提交
-
-
由 Andrew Victor 提交于
Patch from Andrew Victor This final patch includes some general fixes. 1. Link in pm.o if CONFIG_PM is enabled. [Should have been included in patch 3605/1]. 2. Use __raw_readl()/__raw_writel() when accessing System Peripheral registers. 3. Removed some unnecessary includes Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
Patch from Andrew Victor This patch adds support for an additional 4 AT91RM9200-based boards: 1. Conitec ARM&EVA [MACH_CARMEVA] (http://www.conitec.net/english/linuxboard.htm) 2. KwikByte KB920x [MACH_KB9200] (http://kwikbyte.com/KB9202_description_new.htm) 3. Embest ATEB9200 [MACH_ATEB9200] (http://www.embedinfo.com/english/product/ATEB9200.asp) 4. Sperry-Sun KAFA board [MACH_KAFA] (unknown) Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 03 4月, 2006 1 次提交
-
-
由 Andrew Victor 提交于
Patch from Andrew Victor This patch adds support for the LED(s) on the AT91RM9200-based boards. (This version of the patch can be applied before Patch 3392/1) Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 11 1月, 2006 2 次提交
-
-
由 Andrew Victor 提交于
#3244) Patch from Andrew Victor This patch adds support to the 2.6 kernel series for the Atmel AT91RM9200 processor. This patch is the support for the Cogent CSB337 and CSB637 boards. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
Patch from Andrew Victor This patch adds support to the 2.6 kernel series for the Atmel AT91RM9200 processor. This patch is the support for Atmel's DK and EK boards. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 10 1月, 2006 1 次提交
-
-
由 SAN People 提交于
Patch from SAN People Following changes were made to clock.c: 1) Replaced <asm/hardware/clock.h> with <linux/clk.h> 2) Removed old unused clk_enable & clk_disable. 3) Replaced clk_use/clk_unuse with clk_enable/clk_disable. Otherwise it's the same as the previous patch. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-