- 25 2月, 2009 1 次提交
-
-
由 Steven Rostedt 提交于
This patch creates the event tracing infrastructure of ftrace. It will create the files: /debug/tracing/available_events /debug/tracing/set_event The available_events will list the trace points that have been registered with the event tracer. set_events will allow the user to enable or disable an event hook. example: # echo sched_wakeup > /debug/tracing/set_event Will enable the sched_wakeup event (if it is registered). # echo "!sched_wakeup" >> /debug/tracing/set_event Will disable the sched_wakeup event (and only that event). # echo > /debug/tracing/set_event Will disable all events (notice the '>') # cat /debug/tracing/available_events > /debug/tracing/set_event Will enable all registered event hooks. Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
-
- 19 2月, 2009 1 次提交
-
-
由 Steven Rostedt 提交于
Impact: fix output of function tracer to be useful The function tracer is pretty useless if KALLSYMS is not configured. Unless you are good at reading hex values, the function tracer should select the KALLSYMS configuration. Also, the dynamic function tracer will fail its self test if KALLSYMS is not selected. Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
-
- 16 2月, 2009 1 次提交
-
-
由 Pekka Paalanen 提交于
Impact: cosmetic change in Kconfig menu layout This patch was originally suggested by Peter Zijlstra, but seems it was forgotten. CONFIG_MMIOTRACE and CONFIG_MMIOTRACE_TEST were selectable directly under the Kernel hacking / debugging menu in the kernel configuration system. They were present only for x86 and x86_64. Other tracers that use the ftrace tracing framework are in their own sub-menu. This patch moves the mmiotrace configuration options there. Since the Kconfig file, where the tracer menu is, is not architecture specific, HAVE_MMIOTRACE_SUPPORT is introduced and provided only by x86/x86_64. CONFIG_MMIOTRACE now depends on it. Signed-off-by: NPekka Paalanen <pq@iki.fi> Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 11 2月, 2009 1 次提交
-
-
由 Frederic Weisbecker 提交于
Add the missing pair tracing_{start,stop}_record_cmdline() to record well the cmdline associated with pid. Changes in v2: - fix a build error, the sched_switch tracer is needed to record the cmdline. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Acked-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 09 2月, 2009 2 次提交
-
-
由 Ingo Molnar 提交于
Impact: build fix The BLK_DEV_IO_TRACE entry used to be in block/Kconfig - which file itself was dependent on CONFIG_BLOCK. But now the entry is in kernel/trace/Kconfig - which is present even on !CONFIG_BLOCK. So add a 'depends on BLOCK' to BLK_DEV_IO_TRACE. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Frederic Weisbecker 提交于
Impact: cleanup Move blktrace.c to kernel/trace, also move its config entry. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Acked-by: NArnaldo Carvalho de Melo <acme@redhat.com> Acked-by: NJens Axboe <jens.axboe@oracle.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 08 2月, 2009 1 次提交
-
-
由 Steven Rostedt 提交于
Impact: prevent deadlock in NMI The ring buffers are not yet totally lockless with writing to the buffer. When a writer crosses a page, it grabs a per cpu spinlock to protect against a reader. The spinlocks taken by a writer are not to protect against other writers, since a writer can only write to its own per cpu buffer. The spinlocks protect against readers that can touch any cpu buffer. The writers are made to be reentrant with the spinlocks disabling interrupts. The problem arises when an NMI writes to the buffer, and that write crosses a page boundary. If it grabs a spinlock, it can be racing with another writer (since disabling interrupts does not protect against NMIs) or with a reader on the same CPU. Luckily, most of the users are not reentrant and protects against this issue. But if a user of the ring buffer becomes reentrant (which is what the ring buffers do allow), if the NMI also writes to the ring buffer then we risk the chance of a deadlock. This patch moves the ftrace_nmi_enter called by nmi_enter() to the ring buffer code. It replaces the current ftrace_nmi_enter that is used by arch specific code to arch_ftrace_nmi_enter and updates the Kconfig to handle it. When an NMI is called, it will set a per cpu variable in the ring buffer code and will clear it when the NMI exits. If a write to the ring buffer crosses page boundaries inside an NMI, a trylock is used on the spin lock instead. If the spinlock fails to be acquired, then the entry is discarded. This bug appeared in the ftrace work in the RT tree, where event tracing is reentrant. This workaround solved the deadlocks that appeared there. Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
-
- 03 2月, 2009 1 次提交
-
-
由 Steven Rostedt 提交于
Now that we have a working ftrace=<tracer> function, make the boot tracer get activated by it. This way we can turn it on or off without recompiling the kernel, as well as keeping the selftests on. The selftests are disabled whenever a default tracer starts running. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 14 1月, 2009 1 次提交
-
-
由 Frederic Weisbecker 提交于
Impact: new tracer The workqueue tracer provides some statistical informations about each cpu workqueue thread such as the number of the works inserted and executed since their creation. It can help to evaluate the amount of work each of them have to perform. For example it can help a developer to decide whether he should choose a per cpu workqueue instead of a singlethreaded one. It only traces statistical informations for now but it will probably later provide event tracing too. Such a tracer could help too, and be improved, to help rt priority sorted workqueue development. To have a snapshot of the workqueues state at any time, just do cat /debugfs/tracing/trace_stat/workqueues Ie: 1 125 125 reiserfs/1 1 0 0 scsi_tgtd/1 1 0 0 aio/1 1 0 0 ata/1 1 114 114 kblockd/1 1 0 0 kintegrityd/1 1 2147 2147 events/1 0 0 0 kpsmoused 0 105 105 reiserfs/0 0 0 0 scsi_tgtd/0 0 0 0 aio/0 0 0 0 ata_aux 0 0 0 ata/0 0 0 0 cqueue 0 0 0 kacpi_notify 0 0 0 kacpid 0 149 149 kblockd/0 0 0 0 kintegrityd/0 0 1000 1000 khelper 0 2270 2270 events/0 Changes in V2: _ Drop the static array based on NR_CPU and dynamically allocate the stat array with num_possible_cpus() and other cpu mask facilities.... _ Trace workqueue insertion at a bit lower level (insert_work instead of queue_work) to handle even the workqueue barriers. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 11 1月, 2009 1 次提交
-
-
由 Pekka Paalanen 提交于
Impact: cosmetic change in Kconfig menu layout This patch was originally suggested by Peter Zijlstra, but seems it was forgotten. CONFIG_MMIOTRACE and CONFIG_MMIOTRACE_TEST were selectable directly under the Kernel hacking / debugging menu in the kernel configuration system. They were present only for x86 and x86_64. Other tracers that use the ftrace tracing framework are in their own sub-menu. This patch moves the mmiotrace configuration options there. Since the Kconfig file, where the tracer menu is, is not architecture specific, HAVE_MMIOTRACE_SUPPORT is introduced and provided only by x86/x86_64. CONFIG_MMIOTRACE now depends on it. Signed-off-by: NPekka Paalanen <pq@iki.fi> Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 06 1月, 2009 1 次提交
-
-
Impact: cleanup kmemtrace now uses ftrace. This patch removes the relay version. Signed-off-by: NEduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 30 12月, 2008 2 次提交
-
-
由 Ingo Molnar 提交于
Impact: build fix Also fix up Kconfig dependencies and include files. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Frederic Weisbecker 提交于
Impact: new tracer plugin This patch adapts kmemtrace raw events tracing to the unified tracing API. To enable and use this tracer, just do the following: echo kmemtrace > /debugfs/tracing/current_tracer cat /debugfs/tracing/trace You will have the following output: # tracer: kmemtrace # # # ALLOC TYPE REQ GIVEN FLAGS POINTER NODE CALLER # FREE | | | | | | | | # | type_id 1 call_site 18446744071565527833 ptr 18446612134395152256 type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1 type_id 1 call_site 18446744071565585534 ptr 18446612134405955584 type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1 type_id 0 call_site 18446744071565636711 ptr 18446612134345164672 bytes_req 240 bytes_alloc 240 gfp_flags 208 node -1 type_id 1 call_site 18446744071565585534 ptr 18446612134405955584 type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1 type_id 0 call_site 18446744071565636711 ptr 18446612134345164912 bytes_req 240 bytes_alloc 240 gfp_flags 208 node -1 type_id 1 call_site 18446744071565585534 ptr 18446612134405955584 type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1 type_id 0 call_site 18446744071565636711 ptr 18446612134345165152 bytes_req 240 bytes_alloc 240 gfp_flags 208 node -1 type_id 0 call_site 18446744071566144042 ptr 18446612134346191680 bytes_req 1304 bytes_alloc 1312 gfp_flags 208 node -1 type_id 1 call_site 18446744071565585534 ptr 18446612134405955584 type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1 type_id 1 call_site 18446744071565585534 ptr 18446612134405955584 That was to stay backward compatible with the format output produced in inux/tracepoint.h. This is the default ouput, but note that I tried something else. If you change an option: echo kmem_minimalistic > /debugfs/trace_options and then cat /debugfs/trace, you will have the following output: # tracer: kmemtrace # # # ALLOC TYPE REQ GIVEN FLAGS POINTER NODE CALLER # FREE | | | | | | | | # | - C 0xffff88007c088780 file_free_rcu + K 4096 4096 000000d0 0xffff88007cad6000 -1 getname - C 0xffff88007cad6000 putname + K 4096 4096 000000d0 0xffff88007cad6000 -1 getname + K 240 240 000000d0 0xffff8800790dc780 -1 d_alloc - C 0xffff88007cad6000 putname + K 4096 4096 000000d0 0xffff88007cad6000 -1 getname + K 240 240 000000d0 0xffff8800790dc870 -1 d_alloc - C 0xffff88007cad6000 putname + K 4096 4096 000000d0 0xffff88007cad6000 -1 getname + K 240 240 000000d0 0xffff8800790dc960 -1 d_alloc + K 1304 1312 000000d0 0xffff8800791d7340 -1 reiserfs_alloc_inode - C 0xffff88007cad6000 putname + K 4096 4096 000000d0 0xffff88007cad6000 -1 getname - C 0xffff88007cad6000 putname + K 992 1000 000000d0 0xffff880079045b58 -1 alloc_inode + K 768 1024 000080d0 0xffff88007c096400 -1 alloc_pipe_info + K 240 240 000000d0 0xffff8800790dca50 -1 d_alloc + K 272 320 000080d0 0xffff88007c088780 -1 get_empty_filp + K 272 320 000080d0 0xffff88007c088000 -1 get_empty_filp Yeah I shall confess kmem_minimalistic should be: kmem_alternative. Whatever, I find it more readable but this a personal opinion of course. We can drop it if you want. On the ALLOC/FREE column, + means an allocation and - a free. On the type column, you have K = kmalloc, C = cache, P = page I would like the flags to be GFP_* strings but that would not be easy to not break the column with strings.... About the node...it seems to always be -1. I don't know why but that shouldn't be difficult to find. I moved linux/tracepoint.h to trace/tracepoint.h as well. I think that would be more easy to find the tracer headers if they are all in their common directory. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 18 12月, 2008 1 次提交
-
-
由 Steven Rostedt 提交于
Impact: enhancement to stack tracer The stack tracer currently is either on when configured in or off when it is not. It can not be disabled when it is configured on. (besides disabling the function tracer that it uses) This patch adds a way to enable or disable the stack tracer at run time. It defaults off on bootup, but a kernel parameter 'stacktrace' has been added to enable it on bootup. A new sysctl has been added "kernel.stack_tracer_enabled" to let the user enable or disable the stack tracer at run time. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 12 12月, 2008 1 次提交
-
-
由 Markus Metzger 提交于
Impact: restructure code, cleanup Remove BTS bits from the hw-branch-tracer (renamed from bts-tracer) and use the ds interface. Signed-off-by: NMarkus Metzger <markut.t.metzger@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 03 12月, 2008 1 次提交
-
-
由 Ingo Molnar 提交于
CONFIG_FUNCTION_GRAPH_TRACER depends on FUNCTION_TRACER already, (turning it non-default) so it so making it default-n is pointless. So enable it by default - it's a nice extension of the function tracer. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 26 11月, 2008 3 次提交
-
-
由 Arjan van de Ven 提交于
Impact: new "power-tracer" ftrace plugin This patch adds a C/P-state ftrace plugin that will generate detailed statistics about the C/P-states that are being used, so that we can look at detailed decisions that the C/P-state code is making, rather than the too high level "average" that we have today. An example way of using this is: mount -t debugfs none /sys/kernel/debug echo cstate > /sys/kernel/debug/tracing/current_tracer echo 1 > /sys/kernel/debug/tracing/tracing_enabled sleep 1 echo 0 > /sys/kernel/debug/tracing/tracing_enabled cat /sys/kernel/debug/tracing/trace | perl scripts/trace/cstate.pl > out.svg Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Frederic Weisbecker 提交于
Impact: cleanup This patch changes the name of the "return function tracer" into function-graph-tracer which is a more suitable name for a tracing which makes one able to retrieve the ordered call stack during the code flow. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Acked-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Markus Metzger 提交于
Impact: add new ftrace plugin A prototype for a BTS ftrace plug-in. The tracer collects branch trace in a cyclic buffer for each cpu. The tracer is not configurable and the trace for each snapshot is appended when doing cat /debug/tracing/trace. This is a proof of concept that will be extended with future patches to become a (hopefully) useful tool. Signed-off-by: NMarkus Metzger <markus.t.metzger@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 23 11月, 2008 3 次提交
-
-
由 Török Edwin 提交于
Impact: cleanup User stack tracing is just implemented for x86, but it is not x86 specific. Introduce a generic config flag, that is currently enabled only for x86. When other arches implement it, they will have to SELECT USER_STACKTRACE_SUPPORT. Signed-off-by: NTörök Edwin <edwintorok@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Steven Rostedt 提交于
Impact: feature to profile if statements This patch adds a branch profiler for all if () statements. The results will be found in: /debugfs/tracing/profile_branch For example: miss hit % Function File Line ------- --------- - -------- ---- ---- 0 1 100 x86_64_start_reservations head64.c 127 0 1 100 copy_bootdata head64.c 69 1 0 0 x86_64_start_kernel head64.c 111 32 0 0 set_intr_gate desc.h 319 1 0 0 reserve_ebda_region head.c 51 1 0 0 reserve_ebda_region head.c 47 0 1 100 reserve_ebda_region head.c 42 0 0 X maxcpus main.c 165 Miss means the branch was not taken. Hit means the branch was taken. The percent is the percentage the branch was taken. This adds a significant amount of overhead and should only be used by those analyzing their system. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Steven Rostedt 提交于
Impact: clean up to make one profiler of like and unlikely tracer The likely and unlikely profiler prints out the file and line numbers of the annotated branches that it is profiling. It shows the number of times it was correct or incorrect in its guess. Having two different files or sections for that matter to tell us if it was a likely or unlikely is pretty pointless. We really only care if it was correct or not. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 16 11月, 2008 1 次提交
-
-
由 Frederic Weisbecker 提交于
This patch adds the support for dynamic tracing on the function return tracer. The whole difference with normal dynamic function tracing is that we don't need to hook on a particular callback. The only pro that we want is to nop or set dynamically the calls to ftrace_caller (which is ftrace_return_caller here). Some security checks ensure that we are not trying to launch dynamic tracing for return tracing while normal function tracing is already running. An example of trace with getnstimeofday set as a filter: ktime_get_ts+0x22/0x50 -> getnstimeofday (2283 ns) ktime_get_ts+0x22/0x50 -> getnstimeofday (1396 ns) ktime_get_ts+0x22/0x50 -> getnstimeofday (1382 ns) ktime_get_ts+0x22/0x50 -> getnstimeofday (1825 ns) ktime_get_ts+0x22/0x50 -> getnstimeofday (1426 ns) ktime_get_ts+0x22/0x50 -> getnstimeofday (1464 ns) ktime_get_ts+0x22/0x50 -> getnstimeofday (1524 ns) ktime_get_ts+0x22/0x50 -> getnstimeofday (1382 ns) ktime_get_ts+0x22/0x50 -> getnstimeofday (1382 ns) ktime_get_ts+0x22/0x50 -> getnstimeofday (1434 ns) ktime_get_ts+0x22/0x50 -> getnstimeofday (1464 ns) ktime_get_ts+0x22/0x50 -> getnstimeofday (1502 ns) ktime_get_ts+0x22/0x50 -> getnstimeofday (1404 ns) ktime_get_ts+0x22/0x50 -> getnstimeofday (1397 ns) ktime_get_ts+0x22/0x50 -> getnstimeofday (1051 ns) ktime_get_ts+0x22/0x50 -> getnstimeofday (1314 ns) ktime_get_ts+0x22/0x50 -> getnstimeofday (1344 ns) ktime_get_ts+0x22/0x50 -> getnstimeofday (1163 ns) ktime_get_ts+0x22/0x50 -> getnstimeofday (1390 ns) ktime_get_ts+0x22/0x50 -> getnstimeofday (1374 ns) Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 13 11月, 2008 1 次提交
-
-
由 Steven Rostedt 提交于
Impact: name change of unlikely tracer and profiler Ingo Molnar suggested changing the config from UNLIKELY_PROFILE to BRANCH_PROFILING. I never did like the "unlikely" name so I went one step farther, and renamed all the unlikely configurations to a "BRANCH" variant. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 12 11月, 2008 2 次提交
-
-
由 Steven Rostedt 提交于
Impact: new likely/unlikely branch tracer This patch adds a way to record the instances of the likely() and unlikely() branch condition annotations. When "unlikely" is set in /debugfs/tracing/iter_ctrl the unlikely conditions will be added to any of the ftrace tracers. The change takes effect when a new tracer is passed into the current_tracer file. For example: bash-3471 [003] 357.014755: [INCORRECT] sched_info_dequeued:sched_stats.h:177 bash-3471 [003] 357.014756: [correct] update_curr:sched_fair.c:489 bash-3471 [003] 357.014758: [correct] calc_delta_fair:sched_fair.c:411 bash-3471 [003] 357.014759: [correct] account_group_exec_runtime:sched_stats.h:356 bash-3471 [003] 357.014761: [correct] update_curr:sched_fair.c:489 bash-3471 [003] 357.014763: [INCORRECT] calc_delta_fair:sched_fair.c:411 bash-3471 [003] 357.014765: [correct] calc_delta_mine:sched.c:1279 Which shows the normal tracer heading, as well as whether the condition was correct "[correct]" or was mistaken "[INCORRECT]", followed by the function, file name and line number. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Steven Rostedt 提交于
Impact: new unlikely/likely profiler Andrew Morton recently suggested having an in-kernel way to profile likely and unlikely macros. This patch achieves that goal. When configured, every(*) likely and unlikely macro gets a counter attached to it. When the condition is hit, the hit and misses of that condition are recorded. These numbers can later be retrieved by: /debugfs/tracing/profile_likely - All likely markers /debugfs/tracing/profile_unlikely - All unlikely markers. # cat /debug/tracing/profile_unlikely | head correct incorrect % Function File Line ------- --------- - -------- ---- ---- 2167 0 0 do_arch_prctl process_64.c 832 0 0 0 do_arch_prctl process_64.c 804 2670 0 0 IS_ERR err.h 34 71230 5693 7 __switch_to process_64.c 673 76919 0 0 __switch_to process_64.c 639 43184 33743 43 __switch_to process_64.c 624 12740 64181 83 __switch_to process_64.c 594 12740 64174 83 __switch_to process_64.c 590 # cat /debug/tracing/profile_unlikely | \ awk '{ if ($3 > 25) print $0; }' |head -20 44963 35259 43 __switch_to process_64.c 624 12762 67454 84 __switch_to process_64.c 594 12762 67447 84 __switch_to process_64.c 590 1478 595 28 syscall_get_error syscall.h 51 0 2821 100 syscall_trace_leave ptrace.c 1567 0 1 100 native_smp_prepare_cpus smpboot.c 1237 86338 265881 75 calc_delta_fair sched_fair.c 408 210410 108540 34 calc_delta_mine sched.c 1267 0 54550 100 sched_info_queued sched_stats.h 222 51899 66435 56 pick_next_task_fair sched_fair.c 1422 6 10 62 yield_task_fair sched_fair.c 982 7325 2692 26 rt_policy sched.c 144 0 1270 100 pre_schedule_rt sched_rt.c 1261 1268 48073 97 pick_next_task_rt sched_rt.c 884 0 45181 100 sched_info_dequeued sched_stats.h 177 0 15 100 sched_move_task sched.c 8700 0 15 100 sched_move_task sched.c 8690 53167 33217 38 schedule sched.c 4457 0 80208 100 sched_info_switch sched_stats.h 270 30585 49631 61 context_switch sched.c 2619 # cat /debug/tracing/profile_likely | awk '{ if ($3 > 25) print $0; }' 39900 36577 47 pick_next_task sched.c 4397 20824 15233 42 switch_mm mmu_context_64.h 18 0 7 100 __cancel_work_timer workqueue.c 560 617 66484 99 clocksource_adjust timekeeping.c 456 0 346340 100 audit_syscall_exit auditsc.c 1570 38 347350 99 audit_get_context auditsc.c 732 0 345244 100 audit_syscall_entry auditsc.c 1541 38 1017 96 audit_free auditsc.c 1446 0 1090 100 audit_alloc auditsc.c 862 2618 1090 29 audit_alloc auditsc.c 858 0 6 100 move_masked_irq migration.c 9 1 198 99 probe_sched_wakeup trace_sched_switch.c 58 2 2 50 probe_wakeup trace_sched_wakeup.c 227 0 2 100 probe_wakeup_sched_switch trace_sched_wakeup.c 144 4514 2090 31 __grab_cache_page filemap.c 2149 12882 228786 94 mapping_unevictable pagemap.h 50 4 11 73 __flush_cpu_slab slub.c 1466 627757 330451 34 slab_free slub.c 1731 2959 61245 95 dentry_lru_del_init dcache.c 153 946 1217 56 load_elf_binary binfmt_elf.c 904 102 82 44 disk_put_part genhd.h 206 1 1 50 dst_gc_task dst.c 82 0 19 100 tcp_mss_split_point tcp_output.c 1126 As you can see by the above, there's a bit of work to do in rethinking the use of some unlikelys and likelys. Note: the unlikely case had 71 hits that were more than 25%. Note: After submitting my first version of this patch, Andrew Morton showed me a version written by Daniel Walker, where I picked up the following ideas from: 1) Using __builtin_constant_p to avoid profiling fixed values. 2) Using __FILE__ instead of instruction pointers. 3) Using the preprocessor to stop all profiling of likely annotations from vsyscall_64.c. Thanks to Andrew Morton, Arjan van de Ven, Theodore Tso and Ingo Molnar for their feed back on this patch. (*) Not ever unlikely is recorded, those that are used by vsyscalls (a few of them) had to have profiling disabled. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Theodore Tso <tytso@mit.edu> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Steven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 11 11月, 2008 1 次提交
-
-
由 Frederic Weisbecker 提交于
Impact: add new tracing plugin which can trace full (entry+exit) function calls This tracer uses the low level function return ftrace plugin to measure the execution time of the kernel functions. The first field is the caller of the function, the second is the measured function, and the last one is the execution time in nanoseconds. - v3: - HAVE_FUNCTION_RET_TRACER have been added. Each arch that support ftrace return should enable it. - ftrace_return_stub becomes ftrace_stub. - CONFIG_FUNCTION_RET_TRACER depends now on CONFIG_FUNCTION_TRACER - Return traces printing can be used for other tracers on trace.c - Adapt to the new tracing API (no more ctrl_update callback) - Correct the check of "disabled" during insertion. - Minor changes... Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 06 11月, 2008 1 次提交
-
-
由 Steven Rostedt 提交于
Impact: quick start and stop of function tracer This patch adds a way to disable the function tracer quickly without the need to run kstop_machine. It adds a new variable called function_trace_stop which will stop the calls to functions from mcount when set. This is just an on/off switch and does not handle recursion like preempt_disable(). It's main purpose is to help other tracers/debuggers start and stop tracing fuctions without the need to call kstop_machine. The config option HAVE_FUNCTION_TRACE_MCOUNT_TEST is added for archs that implement the testing of the function_trace_stop in the mcount arch dependent code. Otherwise, the test is done in the C code. x86 is the only arch at the moment that supports this. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 03 11月, 2008 1 次提交
-
-
由 Al Viro 提交于
Impact: build fix on !stacktrace architectures only select STACKTRACE on architectures that have STACKTRACE_SUPPORT ... since we also need to ifdef out the guts of ftrace_trace_stack(). We also want to disallow setting TRACE_ITER_STACKTRACE in trace_flags on such configs, but that can wait. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Acked-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 30 10月, 2008 1 次提交
-
-
由 Steven Rostedt 提交于
Impact: build fix on non-function-tracing architectures The trace_nop is the tracer that is defined when no tracer is set in the ftrace infrastructure. The trace_nop was mistakenly selected by HAVE_FTRACE due to the confusion between ftrace infrastructure and the ftrace function tracer (which has been solved by renaming the function tracer). This patch changes the select to the approriate TRACING. This patch should fix compile errors on architectures that do not define the FUNCTION_TRACER. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 27 10月, 2008 1 次提交
-
-
由 Frederic Weisbecker 提交于
Impact: build fix If the boot tracer is selected but not the sched_switch, there will be a build failure: kernel/built-in.o: In function `boot_trace_init': trace_boot.c:(.text+0x5ee38): undefined reference to `sched_switch_trace' kernel/built-in.o: In function `disable_boot_trace': (.text+0x5eee1): undefined reference to `tracing_stop_cmdline_record' kernel/built-in.o: In function `enable_boot_trace': (.text+0x5ef11): undefined reference to `tracing_start_cmdline_record' This patch fixes it. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 22 10月, 2008 1 次提交
-
-
由 Peter Zijlstra 提交于
We seem to have plenty tracers, lets create a menu and not clutter the already cluttered debug menu more. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NFrédéric Weisbecker <fweisbec@gmail.com> Acked-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 21 10月, 2008 2 次提交
-
-
由 Steven Rostedt 提交于
Due to confusion between the ftrace infrastructure and the gcc profiling tracer "ftrace", this patch renames the config options from FTRACE to FUNCTION_TRACER. The other two names that are offspring from FTRACE DYNAMIC_FTRACE and FTRACE_MCOUNT_RECORD will stay the same. This patch was generated mostly by script, and partially by hand. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Steven Rostedt 提交于
A lot of tracers have HAVE_FTRACE as a dependent config where it really should not. The HAVE_FTRACE is a misnomer (soon to be fixed) and describes if the architecture has the function tracer (mcount) implemented. The ftrace infrastructure is implemented in all archs. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 14 10月, 2008 6 次提交
-
-
由 Ingo Molnar 提交于
Improve the help text of the boot tracer. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Improve the help text that is displayed for CONFIG_STACK_TRACER. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Steven Rostedt 提交于
This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Frédéric Weisbecker 提交于
The tracing engine resets the ring buffer and the tracers touch it too during self-tests. These self-tests happen during tracers registering and work against boot tracing which is logging initcalls. We have to disable tracing self-tests if the boot-tracer is selected. Reported-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Frédéric Weisbecker 提交于
Bring the entry to choose the boot tracer on the kernel config. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Frédéric Weisbecker 提交于
Now that the nop tracer is used as the default tracer by replacing the "none" tracer, tracing engine depends on it. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Steven Noonan <steven@uplinklabs.net> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-