- 15 2月, 2006 2 次提交
-
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
- 14 2月, 2006 32 次提交
-
-
由 Jean Delvare 提交于
Probe and remove methods are now defined at bus level. No more need to redefine them at driver level in i2c-isa. This lets us get rid of these annoying messages: Driver 'it87-isa' needs updating - please use bus_type methods Thanks to Nicolas Mailhot for reporting the problem and testing the fix. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jean Delvare 提交于
Fix an oops on it87 module removal when no supported hardware was found. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jean Delvare 提交于
Document the reset module parameter which was recently added to the w83627hf driver. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jean Delvare 提交于
Use the real-time status registers of the Winbond W83782D, W83783S and W83627HF chips, instead of the interrupt status registers. Interrupts cannot be trusted at least for voltage inputs, as they are two-times triggers (as opposed to comparator mode, which we want.) The w83627hf driver was fixed in a similar way some times ago. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jean Delvare 提交于
The VT8231 low temperature limits are actually hysteresis temperatures to the high limits. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Roger Lucas <roger@planbit.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Phil Dibowitz 提交于
The following patch looks good to me. It adds an unusual_devs entry as well as fixing an ordering bug. Please apply. From: Bohdan Linda <bohdan.linda@gmail.com> Signed-off-by: NPhil Dibowitz <phil@ipom.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
Another unusual_devs.h entry (as652). Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
A new unusual_devs.h entry (as651). Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
Here is a new entry for unusual_devs.h (as630). Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as631) for unusual_devs.h fixes bugzilla entry 5913. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NPhil Dibowitz <phil@ipom.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
The switchover to "platform_driver" from "device_driver" missed one rather essential usage, which broke the sl811_cs driver ... this resolves the omission. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Christian Lindner 提交于
The patch adds the USB ID (0413:2101) for the Leadtek GPS-Mouse 9531 to the driver pl2303. Signed-off-by: NChristian Lindner <christian.lindner@gmx.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Michael Hund 提交于
Signed-off-by: NMichael Hund <mhund@ld-didactic.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Michael Hund 提交于
Signed-off-by: NMichael Hund <mhund@ld-didactic.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
Disable some dubious "early" USB handoff code that allegedly works around bugs on some systems (we don't know which ones) but rudely breaks some others. Also make the kernel warnings reporting BIOS handoff problems be more useful, reporting the register whose value displays the trouble. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Kyle McMartin 提交于
parisc defines ARCH_WANT_STAT64, so we want to use fstatat64. It does not appear that it needs to be ENTRY_COMP, because struct stat64 is the same on both 32-bit and 64-bit (unlike on other platforms which did define a compat_sys_fstatat64.) Signed-off-by: NGrant Grundler <grundler@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 David S. Miller 提交于
Revert the following changeset: bc8dfcb9 Recursive SKB frag lists are really possible and disallowing them breaks things. Noticed by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
Problem discovered and initial patch by Olaf Kirch: there's a problem with IPsec that has been bugging some of our users for the last couple of kernel revs. Every now and then, IPsec will freeze the machine completely. This is with openswan user land, and with kernels up to and including 2.6.16-rc2. I managed to debug this a little, and what happens is that we end up looping in xfrm_lookup, and never get out. With a bit of debug printks added, I can this happening: ip_route_output_flow calls xfrm_lookup xfrm_find_bundle returns NULL (apparently we're in the middle of negotiating a new SA or something) We therefore call xfrm_tmpl_resolve. This returns EAGAIN We go to sleep, waiting for a policy update. Then we loop back to the top Apparently, the dst_orig that was passed into xfrm_lookup has been dropped from the routing table (obsolete=2) This leads to the endless loop, because we now create a new bundle, check the new bundle and find it's stale (stale_bundle -> xfrm_bundle_ok -> dst_check() return 0) People have been testing with the patch below, which seems to fix the problem partially. They still see connection hangs however (things only clear up when they start a new ping or new ssh). So the patch is obvsiouly not sufficient, and something else seems to go wrong. I'm grateful for any hints you may have... I suggest that we simply bail out always. If the dst decides to die on us later on, the packet will be dropped anyway. So there is no great urgency to retry here. Once we have the proper resolution queueing, we can then do the retry again. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Acked-by: NOlaf Kirch <okir@suse.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas DICHTEL 提交于
Signed-off-by: NNicolas DICHTEL <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrew Morton 提交于
drivers/net/appletalk/cops.c: In function `cops_load': drivers/net/appletalk/cops.c:539: warning: assignment discards qualifiers from pointer target type drivers/net/appletalk/cops.c:547: warning: assignment discards qualifiers from pointer target type Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jamal Hadi Salim 提交于
- panic() doesn't return. - Don't forget to unlock on genl_register_family() error path - genl_rcv_msg() is called via pointer so there's no point in declaring it `inline'. Notes: genl_ctrl_event() ignores the genlmsg_multicast() return value. lots of things ignore the genl_ctrl_event() return value. Signed-off-by: NJamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Horms patch was the best of the three fixes. Dave, already applied Harald's version, so this patch converts that to the better one. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Harald Welte 提交于
The new x_tables related Kconfig options appear at the wrong menu level without this patch. Signed-off-by: NHarald Welte <laforge@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
-
由 Dave Jones 提交于
Missing license tag. I've assumed this is GPL. (It could also use a MODULE_AUTHOR) Signed-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dave Jones 提交于
isic can trigger these msgs to be spewed at a very high rate. There's already a sysctl to turn them off. Given these messages aren't useful for most people, this patch disables them by default. Signed-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dave Jones 提交于
This seems to be trivial to trigger. Signed-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
From: Joe Perches <joe@perches.com> Based upon a patch by Dave Jones. Signed-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dave Jones 提交于
I get a machine check exception, triple fault, or NMI watchdog lockup when DRI gets enabled on this card. (And Mauro Tassinari <mtassinari@cmanet.it> reports hung kernels too in http://lkml.org/lkml/2006/1/26/97) [ Adrian Bunk also states that this is the only RV350 entry for an RV370 in our lists, which implies that it's just buggy ] Cc: Adrian Bunk <bunk@stusta.de> Cc: Dave Jones <davej@redhat.com> Cc: Mauro Tassinari <mtassinari@cmanet.it> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Mahoney 提交于
This fixes a potential oops if there is an error reported by posix_acl_from_disk(). This is mostly theoretical due to the use of magics and checksums in xattrs, but is still possible. Signed-off-by: NJeff Mahoney <jeffm@suse.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 13 2月, 2006 6 次提交
-
-
由 Yoichi Yuasa 提交于
As noted by Jan Dittmer <jdi@l4x.org> Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Marcel Holtmann 提交于
Before the PCMCIA subsystem was fully integrated into the device and driver model, the BT3C driver had to workaround this when loading the firmware. This workaround is broken and makes the driver oops when loading the firmware. This patch removes this workaround and uses now the provided device structure from the PCMCIA subsystem. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
This patch fixes the two NULL pointer dereferences found by the sfuzz tool from Ilja van Sprundel. The first one was a call of getsockname() for an unbound socket and the second was calling accept() while this operation isn't implemented for the HCI socket interface. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
This patch reduces the default L2CAP MTU for all RFCOMM connections from 1024 to 1013 to improve the interoperability with some broken RFCOMM implementations. To make this more flexible the L2CAP MTU becomes also a module parameter and so it can changed at runtime. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
-