- 18 5月, 2009 1 次提交
-
-
由 Yinghai Lu 提交于
according to Ingo, io_apic irq-setup related functions have too many parameters with a repetitive signature. So reduce related funcs to get less params by passing a pointer to a newly defined io_apic_irq_attr structure. v2: io_apic_irq ==> irq_attr triggering ==> trigger v3: add set_io_apic_irq_attr [ Impact: cleanup ] Signed-off-by: NYinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Len Brown <lenb@kernel.org> LKML-Reference: <4A08ACD3.2070401@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 11 5月, 2009 2 次提交
-
-
由 Yinghai Lu 提交于
So we can set io apic routing only when enabling the device irq. This is advantageous for IRQ descriptor allocation affinity: if we set up the IO-APIC entry later, we have a chance to allocate the IRQ descriptor later and know which device it is on and can set affinity accordingly. [ Impact: standardize/enhance irq-enabling sequence for mptable irqs ] Signed-off-by: NYinghai Lu <yinghai@kernel.org> Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org> Cc: Len Brown <lenb@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> LKML-Reference: <4A01C46E.8000501@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
To prepare those params for pcibios_irq_enable() to call setup_io_apic_routing(). [ Impact: extend function call API to prepare for new functionality ] Signed-off-by: NYinghai Lu <yinghai@kernel.org> Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org> Cc: Len Brown <lenb@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> LKML-Reference: <4A01C406.2040303@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 28 1月, 2009 1 次提交
-
-
由 Seth Heasley 提交于
This patch adds the Intel Tigerpoint LPC Controller DeviceIDs. Signed-off-by: NSeth Heasley <seth.heasley@intel.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 08 1月, 2009 4 次提交
-
-
由 Bjorn Helgaas 提交于
Use the generic pci_swizzle_interrupt_pin() instead of arch-specific code. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: hpa@zytor.com Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Bjorn Helgaas 提交于
Test "pin" immediately to simplify the subsequent code. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: hpa@zytor.com Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Bjorn Helgaas 提交于
Keep "pin" encoded as it is in the "Interrupt Pin" value in PCI config space, i.e., 0=device doesn't use interrupts, 1=INTA, ..., 4=INTD. This makes the bridge INTx swizzle match other architectures. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: hpa@zytor.com Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Bjorn Helgaas 提交于
This patch makes pci_get_interrupt_pin() return values encoded the same way as the "Interrupt Pin" value in PCI config space, i.e., 1=INTA, ..., 4=INTD. pirq_bios_set() is the only in-tree caller of pci_get_interrupt_pin() and pci_get_interrupt_pin() is not exported. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: hpa@zytor.com Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 30 12月, 2008 1 次提交
-
-
由 Jaswinder Singh Rajput 提交于
Impact: cleanup Now that arch/x86/pci/pci.h is used in a number of other places as well, move the lowlevel x86 pci definitions into the architecture include files. (not to be confused with the existing arch/x86/include/asm/pci.h file, which provides public details about x86 PCI) Tested on: X86_32_UP, X86_32_SMP and X86_64_SMP Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 21 10月, 2008 2 次提交
-
-
由 Seth Heasley 提交于
This patch updates the Intel Ibex Peak (PCH) LPC and SMBus Controller DeviceIDs. The LPC Controller ID is set by Firmware within the range of 0x3b00-3b1f. This range is included in pci_ids.h using min and max values, and irq.c now has code to handle the range (in lieu of 32 additions to a SWITCH statement). The SMBus Controller ID is a fixed-value and will not change. Signed-off-by: NSeth Heasley <seth.heasley@intel.com> Acked-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Bjorn Helgaas 提交于
Use "[%04x:%04x]" for PCI vendor/device IDs to follow the format used by lspci(8). Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 21 8月, 2008 1 次提交
-
-
由 Andrew Morton 提交于
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 16 8月, 2008 1 次提交
-
-
由 Seth Heasley 提交于
This patch adds the Intel Ibex Peak (PCH) LPC and SMBus Controller DeviceIDs. Signed-off-by: NSeth Heasley <seth.heasley@intel.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 29 7月, 2008 1 次提交
-
-
由 Bjorn Helgaas 提交于
Convert printks to use dev_printk(). I converted DBG() to dev_dbg(). This DBG() is from arch/x86/pci/pci.h and requires source-code modification to enable, so dev_dbg() seems roughly equivalent. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 09 7月, 2008 1 次提交
-
-
由 Robert Richter 提交于
So far subsys_initcalls has been executed in this order depending on the object order in the Makefile: arch/x86/pci/visws.c:subsys_initcall(pcibios_init); arch/x86/pci/numa.c:subsys_initcall(pci_numa_init); arch/x86/pci/acpi.c:subsys_initcall(pci_acpi_init); arch/x86/pci/legacy.c:subsys_initcall(pci_legacy_init); arch/x86/pci/irq.c:subsys_initcall(pcibios_irq_init); arch/x86/pci/common.c:subsys_initcall(pcibios_init); This patch removes the ordering dependency. There is now only one subsys_initcall function that contains subsystem initialization code with a defined order. Signed-off-by: NRobert Richter <robert.richter@amd.com> Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 11 6月, 2008 1 次提交
-
-
由 Miklos Vajna 提交于
Wrapped long lines, removed trailing whitespaces, fixed case indentation inside switch and so. Signed-off-by: NMiklos Vajna <vmiklos@frugalware.org> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 10 6月, 2008 1 次提交
-
-
由 Paolo Ciarrocchi 提交于
Before: total: 60 errors, 85 warnings, 1237 lines checked After: total: 1 errors, 82 warnings, 1226 lines checked WARNING: line over 80 characters Compile tested. paolo@paolo-desktop:/tmp$ size irq.o.* text data bss dec hex filename 6128 440 76 6644 19f4 irq.o.after 6128 440 76 6644 19f4 irq.o.before Signed-off-by: NPaolo Ciarrocchi <paolo.ciarrocchi@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 06 6月, 2008 1 次提交
-
-
由 Bertram Felgenhauer 提交于
This BIOS claims the VIA 8237 south bridge to be compatible with VIA 586, which it is not. Without this patch, I get the following warning while booting, among others, | PCI: Using IRQ router VIA [1106/3227] at 0000:00:11.0 | ------------[ cut here ]------------ | WARNING: at arch/x86/pci/irq.c:265 pirq_via586_get+0x4a/0x60() | Modules linked in: | Pid: 1, comm: swapper Not tainted 2.6.26-rc4-00015-g1ec7d99c #1 | [<c0119fd4>] warn_on_slowpath+0x54/0x70 | [<c02246e0>] ? vt_console_print+0x210/0x2b0 | [<c02244d0>] ? vt_console_print+0x0/0x2b0 | [<c011a413>] ? __call_console_drivers+0x43/0x60 | [<c011a482>] ? _call_console_drivers+0x52/0x80 | [<c011aa89>] ? release_console_sem+0x1c9/0x200 | [<c0291d21>] ? raw_pci_read+0x41/0x70 | [<c0291e8f>] ? pci_read+0x2f/0x40 | [<c029151a>] pirq_via586_get+0x4a/0x60 | [<c02914d0>] ? pirq_via586_get+0x0/0x60 | [<c029178d>] pcibios_lookup_irq+0x15d/0x430 | [<c03b895a>] pcibios_irq_init+0x17a/0x3e0 | [<c03a66f0>] ? kernel_init+0x0/0x250 | [<c03a6763>] kernel_init+0x73/0x250 | [<c03b87e0>] ? pcibios_irq_init+0x0/0x3e0 | [<c0114d00>] ? schedule_tail+0x10/0x40 | [<c0102dee>] ? ret_from_fork+0x6/0x1c | [<c03a66f0>] ? kernel_init+0x0/0x250 | [<c03a66f0>] ? kernel_init+0x0/0x250 | [<c010324b>] kernel_thread_helper+0x7/0x1c | ======================= | ---[ end trace 4eaa2a86a8e2da22 ]--- and IRQ trouble later, | irq 10: nobody cared (try booting with the "irqpoll" option) Now that's an VIA 8237 chip, so pirq_via586_get shouldn't be called at all; adding this workaround to via_router_probe() fixes the problem for me. Amazingly I have a 2.6.23.8 kernel that somehow works fine ... I'll never understand why. Signed-off-by: NBertram Felgenhauer <int-e@gmx.de> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: NAlan Cox <alan@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 02 6月, 2008 1 次提交
-
-
由 Bertram Felgenhauer 提交于
This BIOS claims the VIA 8237 south bridge to be compatible with VIA 586, which it is not. Without this patch, I get the following warning while booting, among others, | PCI: Using IRQ router VIA [1106/3227] at 0000:00:11.0 | ------------[ cut here ]------------ | WARNING: at arch/x86/pci/irq.c:265 pirq_via586_get+0x4a/0x60() | Modules linked in: | Pid: 1, comm: swapper Not tainted 2.6.26-rc4-00015-g1ec7d99c #1 | [<c0119fd4>] warn_on_slowpath+0x54/0x70 | [<c02246e0>] ? vt_console_print+0x210/0x2b0 | [<c02244d0>] ? vt_console_print+0x0/0x2b0 | [<c011a413>] ? __call_console_drivers+0x43/0x60 | [<c011a482>] ? _call_console_drivers+0x52/0x80 | [<c011aa89>] ? release_console_sem+0x1c9/0x200 | [<c0291d21>] ? raw_pci_read+0x41/0x70 | [<c0291e8f>] ? pci_read+0x2f/0x40 | [<c029151a>] pirq_via586_get+0x4a/0x60 | [<c02914d0>] ? pirq_via586_get+0x0/0x60 | [<c029178d>] pcibios_lookup_irq+0x15d/0x430 | [<c03b895a>] pcibios_irq_init+0x17a/0x3e0 | [<c03a66f0>] ? kernel_init+0x0/0x250 | [<c03a6763>] kernel_init+0x73/0x250 | [<c03b87e0>] ? pcibios_irq_init+0x0/0x3e0 | [<c0114d00>] ? schedule_tail+0x10/0x40 | [<c0102dee>] ? ret_from_fork+0x6/0x1c | [<c03a66f0>] ? kernel_init+0x0/0x250 | [<c03a66f0>] ? kernel_init+0x0/0x250 | [<c010324b>] kernel_thread_helper+0x7/0x1c | ======================= | ---[ end trace 4eaa2a86a8e2da22 ]--- and IRQ trouble later, | irq 10: nobody cared (try booting with the "irqpoll" option) Now that's an VIA 8237 chip, so pirq_via586_get shouldn't be called at all; adding this workaround to via_router_probe() fixes the problem for me. Amazingly I have a 2.6.23.8 kernel that somehow works fine ... I'll never understand why. Signed-off-by: NBertram Felgenhauer <int-e@gmx.de> Acked-by: NAlan Cox <alan@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 27 4月, 2008 1 次提交
-
-
由 Yinghai Lu 提交于
Currently, on an amd k8 system with multi ht chains, the numa_node of pci devices under /sys/devices/pci0000:80/* is always 0, even if that chain is on node 1 or 2 or 3. Workaround: pcibus_to_node(bus) is used when we want to get the node that pci_device is on. In struct device, we already have numa_node member, and we could use dev_to_node()/set_dev_node() to get and set numa_node in the device. set_dev_node is called in pci_device_add() with pcibus_to_node(bus), and pcibus_to_node uses bus->sysdata for nodeid. The problem is when pci_add_device is called, bus->sysdata is not assigned correct nodeid yet. The result is that numa_node will always be 0. pcibios_scan_root and pci_scan_root could take sysdata. So we need to get mp_bus_to_node mapping before these two are called, and thus get_mp_bus_to_node could get correct node for sysdata in root bus. In scanning of the root bus, all child busses will take parent bus sysdata. So all pci_device->dev.numa_node will be assigned correctly and automatically. Later we could use dev_to_node(&pci_dev->dev) to get numa_node, and we could also could make other bus specific device get the correct numa_node too. This is an updated version of pci_sysdata and Jeff's pci_domain patch. [ mingo@elte.hu: build fix ] Signed-off-by: NYinghai Lu <yinghai.lu@sun.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 17 4月, 2008 1 次提交
-
-
由 Björn Steinbrink 提交于
fix bogus pirq warnings reported in: http://bugzilla.kernel.org/show_bug.cgi?id=10366 safe to be backported to v2.6.25 and earlier. Cc: stable@kernel.org Signed-off-by: NBjörn Steinbrink <B.Steinbrink@gmx.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 22 2月, 2008 1 次提交
-
-
由 Jason Gaston 提交于
This patch adds the Intel ICH10 LPC Controller DeviceID's. Signed-off-by: NJason Gaston <jason.d.gaston@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 30 1月, 2008 2 次提交
-
-
由 Alan Cox 提交于
I can find no reason for the _p on the serverworks IRQ routing logic, and a review of the documentation contains no indication that any such delay is needed so lets try this Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
we use a few static mapping rules in our pirq routing functions, and for example regression f3ac8432 was due to the pirq being out of range of the remapping array. Put in a few WARN_ON_ONCE() lines so that we get notified about any such out-of-bound incidents. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 20 10月, 2007 1 次提交
-
-
由 Simon Arlott 提交于
Spelling fixes in arch/i386/. Signed-off-by: NSimon Arlott <simon@fire.lp0.eu> Signed-off-by: NAdrian Bunk <bunk@kernel.org>
-
- 13 10月, 2007 1 次提交
-
-
由 Thomas Backlund 提交于
Add support for PicoPower PT86C523 IRQ router to be used with the in-kernel yenta driver for CardBus. With this patch cardbus works on e.g. Dell Latitude XPi P150CD. Initial patch for kernel 2.4 series by Sune Mølgaard http://molgaard.org/code/linux-2.4.31-picopower.patch Ported to 2.6.20 by Chmouel Boudjnah (http://www.chmouel.com) Testing and confirmation that it works by Austin Acton Cleaned up a little for inclusion in a 2.6.21-rc7 based kernel. Added some more cleanups according to CodingStyle, as noted by Randy Dunlap on LKML. [akpm@linux-foundation.org: build fixes] Signed-off-by: NThomas Backlund <tmb@mandriva.org> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 11 10月, 2007 1 次提交
-
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 10 10月, 2007 1 次提交
-
-
由 Jeff Garzik 提交于
Three main sets of changes: 1) dmi_get_system_info() return value should have been marked const, since callers should not be changing that data. 2) const-ify DMI internals, since DMI firmware tables should, whenever possible, be marked const to ensure we never ever write to that data area. 3) const-ify DMI API, to enable marking tables const where possible in low-level drivers. And if we're really lucky, this might enable some additional optimizations on the part of the compiler. The bulk of the changes are #2 and #3, which are interrelated. #1 could have been a separate patch, but it was so small compared to the others, it was easier to roll it into this changeset. Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 11 9月, 2007 1 次提交
-
-
由 Jason Gaston 提交于
This patch adds the Intel Tolapai LPC and SMBus Controller DID's. Signed-off-by: NJason Gaston <jason.d.gaston@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 12 8月, 2007 1 次提交
-
-
由 Muli Ben-Yehuda 提交于
This patch finishes the i386 and x86-64 ->sysdata conversion and hopefully also fixes Riku's and Andy's observed bugs. It is based on Yinghai Lu's and Andy Whitcroft's patches (thanks!) with some changes: - introduce pci_scan_bus_with_sysdata() and use it instead of pci_scan_bus() where appropriate. pci_scan_bus_with_sysdata() will allocate the sysdata structure and then call pci_scan_bus(). - always allocate pci_sysdata dynamically. The whole point of this sysdata work is to make it easy to do root-bus specific things (e.g., support PCI domains and IOMMU's). I dislike using a default struct pci_sysdata in some places and a dynamically allocated pci_sysdata elsewhere - the potential for someone indavertantly changing the default structure is too high. - this patch only makes the minimal changes necessary, i.e., the NUMA node is always initialized to -1. Patches to do the right thing with regards to the NUMA node can build on top of this (either add a 'node' parameter to pci_scan_bus_with_sysdata() or just update the node when it becomes known). The patch was compile tested with various configurations (e.g., NUMAQ, VISWS) and run-time tested on i386 and x86-64. Unfortunately none of my machines exhibited the bugs so caveat emptor. Andy, could you please see if this fixes the NUMA issues you've seen? Riku, does this fix "pci=noacpi" on your laptop? Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Andi Kleen <ak@suse.de> Cc: Chuck Ebbert <cebbert@redhat.com> Cc: <riku.seppala@kymp.net> Cc: Andy Whitcroft <apw@shadowen.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 07 12月, 2006 1 次提交
-
-
由 Alan Cox 提交于
Resending as I believe the discussion about them established they were correct. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org>
-
- 02 12月, 2006 1 次提交
-
-
由 Jason Gaston 提交于
This updated patch adds the Intel ICH9 LPC and SMBus Controller DID's. Signed-off-by: NJason Gaston <jason.d.gaston@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 15 11月, 2006 1 次提交
-
-
由 Daniel Ritz 提交于
Fix interrupt routing for via 586 bridges. pirq can be 5 which needs to be mapped to INTD. But currently the access functions can handle only pirq 1-4. this is similar to the other via chipsets where pirq 4 and 5 are both mapped to INTD. Fixes bugzilla #7490 Cc: Daniel Paschka <monkey20181@gmx.net> Cc: Adrian Bunk <bunk@susta.de> Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 09 10月, 2006 1 次提交
-
-
由 Eric W. Biederman 提交于
In commit ace80ab7 I removed the weird logic that used the vector number as the irq number when MSI was defined. However pci_enable_irq was using a different test in the io_apic_assign_irqs path and I missed it :( This patch removes the wrong code so no one hits this problem. This code is only active when a specific set of boot command line parameters is specified which likely explains why no one has notices this earlier. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 04 10月, 2006 2 次提交
-
-
由 Eric W. Biederman 提交于
This patch removes the change in behavior of the irq allocation code when CONFIG_PCI_MSI is defined. Removing all instances of the assumption that irq == vector. create_irq is rewritten to first allocate a free irq and then to assign that irq a vector. assign_irq_vector is made static and the AUTO_ASSIGN case which allocates an vector not bound to an irq is removed. The ioapic vector methods are removed, and everything now works with irqs. The definition of NR_IRQS no longer depends on CONFIG_PCI_MSI [akpm@osdl.org: cleanup] Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Eric W. Biederman 提交于
Currently we attempt to predict how many irqs we will be able to allocate with msi using pci_vector_resources and some complicated accounting, and then we only allow each device as many irqs as we think are available on average. Only the s2io driver even takes advantage of this feature all other drivers have a fixed number of irqs they need and bail if they can't get them. pci_vector_resources is inaccurate if anyone ever frees an irq. The whole implmentation is racy. The current irq limit policy does not appear to make sense with current drivers. So I have simplified things. We can revisit this we we need a more sophisticated policy. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 03 7月, 2006 1 次提交
-
-
由 Thomas Gleixner 提交于
Use the new IRQF_ constants and remove the SA_INTERRUPT define Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 7月, 2006 1 次提交
-
-
由 Jörn Engel 提交于
Signed-off-by: NJörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 23 6月, 2006 2 次提交
-
-
由 Andreas Mohr 提交于
constify structs and add one __initdata. Signed-off-by: NAndreas Mohr <andi@lisas.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-